Merged upcoming 1.0.4 and updated revision log

1 files changed, 0 insertions, 94 deletions

diff --git a/libraries/Esplora/examples/EsploraRemote/EsploraRemote.ino b/libraries/Esplora/examples/EsploraRemote/EsploraRemote.ino
deleted file mode 100644
index 135b26a..0000000
--- a/libraries/Esplora/examples/EsploraRemote/EsploraRemote.ino
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-  Esplora Slave
-
-  This sketch allows to test all the Esplora's peripherals.
-  It is also used with the ProcessingStart sketch (for Processing).
-  
-  When uploaded, you can open the Serial monitor and write one of
-  the following commands (without quotes) to get an answer:
-  
-  "D": prints the current value of all sensors, separated by a comma.
-       See the dumpInputs() function below to get the meaning of
-       each value.
-       
-  "Rxxx"
-  "Gxxx"
-  "Bxxx": set the color of the RGB led. For example, write "R255"
-          to turn on the red to full brightness, "G128" to turn
-          the green to half brightness, or "G0" to turn off
-          the green channel.
-  
-  "Txxxx": play a tone with the buzzer. The number is the
-           frequency, e.g. "T440" plays the central A note.
-           Write "T0" to turn off the buzzer.
-  
-
-  Created on 22 november 2012
-  By Enrico Gueli <enrico.gueli@gmail.com>
-*/
-
-#include <Esplora.h>
-
-void setup() {
-  while(!Serial); // needed for Leonardo-based board like Esplora
-  Serial.begin(9600);
-}
-
-void loop() {
-  if (Serial.available())
-    parseCommand();
-}
-
-/*
- * This function reads a character from the serial line and
- * decide what to do next. The "what to do" part is given by
- * function it calls (e.g. dumpInputs(), setRed() and so on).
- */
-void parseCommand() {
-  char cmd = Serial.read();
-  switch(cmd) {
-    case 'D': dumpInputs(); break;
-    case 'R': setRed(); break;
-    case 'G': setGreen(); break;
-    case 'B': setBlue(); break;
-    case 'T': setTone(); break;
-  }
-}
-
-void dumpInputs() {  
-  /*
-   * please note: a single row contains two instructions.
-   * one is to print the sensor value, the other to print the
-   * comma symbol.
-   */
-  Serial.print(Esplora.readButton(SWITCH_1)); Serial.print(',');
-  Serial.print(Esplora.readButton(SWITCH_2)); Serial.print(',');
-  Serial.print(Esplora.readButton(SWITCH_3)); Serial.print(',');
-  Serial.print(Esplora.readButton(SWITCH_4)); Serial.print(',');
-  Serial.print(Esplora.readSlider());         Serial.print(',');
-  Serial.print(Esplora.readLightSensor());    Serial.print(',');
-  Serial.print(Esplora.readTemperature(DEGREES_C)); Serial.print(',');
-  Serial.print(Esplora.readMicrophone());     Serial.print(',');
-  Serial.print(Esplora.readJoystickSwitch()); Serial.print(',');
-  Serial.print(Esplora.readJoystickX());      Serial.print(',');
-  Serial.print(Esplora.readJoystickY());      Serial.print(',');
-  Serial.print(Esplora.readAccelerometer(X_AXIS)); Serial.print(',');
-  Serial.print(Esplora.readAccelerometer(Y_AXIS)); Serial.print(',');
-  Serial.print(Esplora.readAccelerometer(Z_AXIS)); Serial.println();
-}
-
-void setRed() {
-  Esplora.writeRed(Serial.parseInt());
-}
-
-void setGreen() {
-  Esplora.writeGreen(Serial.parseInt());
-}
-
-void setBlue() {
-  Esplora.writeBlue(Serial.parseInt());
-}
-
-void setTone() {
-  Esplora.tone(Serial.parseInt());
-}