From c01bc2b62f76a5d417e5ed13dcb0c047a4f67224 Mon Sep 17 00:00:00 2001
From: Cristian Maglie <c.maglie@bug.st>
Date: Sun, 6 Jan 2013 18:38:03 +0100
Subject: Merged upcoming 1.0.4 and updated revision log
---
.../examples/EsploraRemote/EsploraRemote.ino | 94 ----------------------
1 file changed, 94 deletions(-)
delete mode 100644 libraries/Esplora/examples/EsploraRemote/EsploraRemote.ino
(limited to 'libraries/Esplora/examples/EsploraRemote')
diff --git a/libraries/Esplora/examples/EsploraRemote/EsploraRemote.ino b/libraries/Esplora/examples/EsploraRemote/EsploraRemote.ino
deleted file mode 100644
index 135b26a..0000000
--- a/libraries/Esplora/examples/EsploraRemote/EsploraRemote.ino
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- Esplora Slave
-
- This sketch allows to test all the Esplora's peripherals.
- It is also used with the ProcessingStart sketch (for Processing).
-
- When uploaded, you can open the Serial monitor and write one of
- the following commands (without quotes) to get an answer:
-
- "D": prints the current value of all sensors, separated by a comma.
- See the dumpInputs() function below to get the meaning of
- each value.
-
- "Rxxx"
- "Gxxx"
- "Bxxx": set the color of the RGB led. For example, write "R255"
- to turn on the red to full brightness, "G128" to turn
- the green to half brightness, or "G0" to turn off
- the green channel.
-
- "Txxxx": play a tone with the buzzer. The number is the
- frequency, e.g. "T440" plays the central A note.
- Write "T0" to turn off the buzzer.
-
-
- Created on 22 november 2012
- By Enrico Gueli <enrico.gueli@gmail.com>
-*/
-
-#include <Esplora.h>
-
-void setup() {
- while(!Serial); // needed for Leonardo-based board like Esplora
- Serial.begin(9600);
-}
-
-void loop() {
- if (Serial.available())
- parseCommand();
-}
-
-/*
- * This function reads a character from the serial line and
- * decide what to do next. The "what to do" part is given by
- * function it calls (e.g. dumpInputs(), setRed() and so on).
- */
-void parseCommand() {
- char cmd = Serial.read();
- switch(cmd) {
- case 'D': dumpInputs(); break;
- case 'R': setRed(); break;
- case 'G': setGreen(); break;
- case 'B': setBlue(); break;
- case 'T': setTone(); break;
- }
-}
-
-void dumpInputs() {
- /*
- * please note: a single row contains two instructions.
- * one is to print the sensor value, the other to print the
- * comma symbol.
- */
- Serial.print(Esplora.readButton(SWITCH_1)); Serial.print(',');
- Serial.print(Esplora.readButton(SWITCH_2)); Serial.print(',');
- Serial.print(Esplora.readButton(SWITCH_3)); Serial.print(',');
- Serial.print(Esplora.readButton(SWITCH_4)); Serial.print(',');
- Serial.print(Esplora.readSlider()); Serial.print(',');
- Serial.print(Esplora.readLightSensor()); Serial.print(',');
- Serial.print(Esplora.readTemperature(DEGREES_C)); Serial.print(',');
- Serial.print(Esplora.readMicrophone()); Serial.print(',');
- Serial.print(Esplora.readJoystickSwitch()); Serial.print(',');
- Serial.print(Esplora.readJoystickX()); Serial.print(',');
- Serial.print(Esplora.readJoystickY()); Serial.print(',');
- Serial.print(Esplora.readAccelerometer(X_AXIS)); Serial.print(',');
- Serial.print(Esplora.readAccelerometer(Y_AXIS)); Serial.print(',');
- Serial.print(Esplora.readAccelerometer(Z_AXIS)); Serial.println();
-}
-
-void setRed() {
- Esplora.writeRed(Serial.parseInt());
-}
-
-void setGreen() {
- Esplora.writeGreen(Serial.parseInt());
-}
-
-void setBlue() {
- Esplora.writeBlue(Serial.parseInt());
-}
-
-void setTone() {
- Esplora.tone(Serial.parseInt());
-}
--
cgit v1.2.3-18-g5258