Remove non-USB boards

Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around.

1 files changed, 0 insertions, 238 deletions

diff --git a/bootloaders/atmega/Makefile b/bootloaders/atmega/Makefile
deleted file mode 100755
index efe92e6..0000000
--- a/bootloaders/atmega/Makefile
+++ /dev/null
@@ -1,238 +0,0 @@
-# Makefile for ATmegaBOOT
-# E.Lins, 18.7.2005
-#
-# Instructions
-#
-# To make bootloader .hex file:
-# make diecimila
-# make lilypad
-# make ng
-# etc...
-#
-# To burn bootloader .hex file:
-# make diecimila_isp
-# make lilypad_isp
-# make ng_isp
-# etc...
-
-# program name should not be changed...
-PROGRAM    = ATmegaBOOT_168
-
-# enter the parameters for the avrdude isp tool
-ISPTOOL	   = stk500v2
-ISPPORT	   = usb
-ISPSPEED   = -b 115200
-
-MCU_TARGET = atmega168
-LDSECTION  = --section-start=.text=0x3800
-
-# the efuse should really be 0xf8; since, however, only the lower
-# three bits of that byte are used on the atmega168, avrdude gets
-# confused if you specify 1's for the higher bits, see:
-# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
-#
-# similarly, the lock bits should be 0xff instead of 0x3f (to
-# unlock the bootloader section) and 0xcf instead of 0x0f (to
-# lock it), but since the high two bits of the lock byte are
-# unused, avrdude would get confused.
-
-ISPFUSES    = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
--e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
-ISPFLASH    = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
--U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
-
-STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
-STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
--lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
-STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
-
-
-OBJ        = $(PROGRAM).o
-OPTIMIZE   = -Os
-
-DEFS       =
-LIBS       =
-
-CC         = avr-gcc
-
-# Override is only needed by avr-lib build system.
-
-override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
-override LDFLAGS       = -Wl,$(LDSECTION)
-#override LDFLAGS       = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
-
-OBJCOPY        = avr-objcopy
-OBJDUMP        = avr-objdump
-
-all:
-
-lilypad: TARGET = lilypad
-lilypad: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3'
-lilypad: AVR_FREQ = 8000000L
-lilypad: $(PROGRAM)_lilypad.hex
-
-lilypad_isp: lilypad
-lilypad_isp: TARGET = lilypad
-lilypad_isp: HFUSE = DD
-lilypad_isp: LFUSE = E2
-lilypad_isp: EFUSE = 00
-lilypad_isp: isp
-
-lilypad_resonator: TARGET = lilypad_resonator
-lilypad_resonator: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3'
-lilypad_resonator: AVR_FREQ = 8000000L
-lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex
-
-lilypad_resonator_isp: lilypad_resonator
-lilypad_resonator_isp: TARGET = lilypad_resonator
-lilypad_resonator_isp: HFUSE = DD
-lilypad_resonator_isp: LFUSE = C6
-lilypad_resonator_isp: EFUSE = 00
-lilypad_resonator_isp: isp
-
-pro8: TARGET = pro_8MHz
-pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS'
-pro8: AVR_FREQ = 8000000L
-pro8: $(PROGRAM)_pro_8MHz.hex
-
-pro8_isp: pro8
-pro8_isp: TARGET = pro_8MHz
-pro8_isp: HFUSE = DD
-pro8_isp: LFUSE = C6
-pro8_isp: EFUSE = 00
-pro8_isp: isp
-
-pro16: TARGET = pro_16MHz
-pro16: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS'
-pro16: AVR_FREQ = 16000000L
-pro16: $(PROGRAM)_pro_16MHz.hex
-
-pro16_isp: pro16
-pro16_isp: TARGET = pro_16MHz
-pro16_isp: HFUSE = DD
-pro16_isp: LFUSE = C6
-pro16_isp: EFUSE = 00
-pro16_isp: isp
-
-pro20: TARGET = pro_20mhz
-pro20: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS'
-pro20: AVR_FREQ = 20000000L
-pro20: $(PROGRAM)_pro_20mhz.hex
-
-pro20_isp: pro20
-pro20_isp: TARGET = pro_20mhz
-pro20_isp: HFUSE = DD
-pro20_isp: LFUSE = C6
-pro20_isp: EFUSE = 00
-pro20_isp: isp
-
-diecimila: TARGET = diecimila
-diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1'
-diecimila: AVR_FREQ = 16000000L
-diecimila: $(PROGRAM)_diecimila.hex
-
-diecimila_isp: diecimila
-diecimila_isp: TARGET = diecimila
-diecimila_isp: HFUSE = DD
-diecimila_isp: LFUSE = FF
-diecimila_isp: EFUSE = 00
-diecimila_isp: isp
-
-ng: TARGET = ng
-ng: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3'
-ng: AVR_FREQ = 16000000L
-ng: $(PROGRAM)_ng.hex
-
-ng_isp: ng
-ng_isp: TARGET = ng
-ng_isp: HFUSE = DD
-ng_isp: LFUSE = FF
-ng_isp: EFUSE = 00
-ng_isp: isp
-
-atmega328: TARGET = atmega328
-atmega328: MCU_TARGET = atmega328p
-atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600
-atmega328: AVR_FREQ = 16000000L
-atmega328: LDSECTION  = --section-start=.text=0x7800
-atmega328: $(PROGRAM)_atmega328.hex
-
-atmega328_isp: atmega328
-atmega328_isp: TARGET = atmega328
-atmega328_isp: MCU_TARGET = atmega328p
-atmega328_isp: HFUSE = DA
-atmega328_isp: LFUSE = FF
-atmega328_isp: EFUSE = 05
-atmega328_isp: isp
-
-atmega328_notp: TARGET = atmega328_notp
-atmega328_notp: MCU_TARGET = atmega328
-atmega328_notp: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600
-atmega328_notp: AVR_FREQ = 16000000L
-atmega328_notp: LDSECTION  = --section-start=.text=0x7800
-atmega328_notp: $(PROGRAM)_atmega328_notp.hex
-
-atmega328_notp_isp: atmega328_notp
-atmega328_notp_isp: TARGET = atmega328
-atmega328_notp_isp: MCU_TARGET = atmega328
-atmega328_notp_isp: HFUSE = DA
-atmega328_notp_isp: LFUSE = FF
-atmega328_notp_isp: EFUSE = 05
-atmega328_notp_isp: isp
-
-atmega328_pro8: TARGET = atmega328_pro_8MHz
-atmega328_pro8: MCU_TARGET = atmega328p
-atmega328_pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED
-atmega328_pro8: AVR_FREQ = 8000000L
-atmega328_pro8: LDSECTION  = --section-start=.text=0x7800
-atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex
-
-atmega328_pro8_isp: atmega328_pro8
-atmega328_pro8_isp: TARGET = atmega328_pro_8MHz
-atmega328_pro8_isp: MCU_TARGET = atmega328p
-atmega328_pro8_isp: HFUSE = DA
-atmega328_pro8_isp: LFUSE = FF
-atmega328_pro8_isp: EFUSE = 05
-atmega328_pro8_isp: isp
-
-mega: TARGET = atmega1280
-mega: MCU_TARGET = atmega1280
-mega: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600
-mega: AVR_FREQ = 16000000L
-mega: LDSECTION  = --section-start=.text=0x1F000
-mega: $(PROGRAM)_atmega1280.hex
-
-mega_isp: mega
-mega_isp: TARGET = atmega1280
-mega_isp: MCU_TARGET = atmega1280
-mega_isp: HFUSE = DA
-mega_isp: LFUSE = FF
-mega_isp: EFUSE = F5
-mega_isp: isp
-
-isp: $(TARGET)
-	$(ISPFUSES)
-	$(ISPFLASH)
-
-isp-stk500: $(PROGRAM)_$(TARGET).hex
-	$(STK500-1)
-	$(STK500-2)
-
-%.elf: $(OBJ)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
-
-clean:
-	rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
-
-%.lst: %.elf
-	$(OBJDUMP) -h -S $< > $@
-
-%.hex: %.elf
-	$(OBJCOPY) -j .text -j .data -O ihex $< $@
-
-%.srec: %.elf
-	$(OBJCOPY) -j .text -j .data -O srec $< $@
-
-%.bin: %.elf
-	$(OBJCOPY) -j .text -j .data -O binary $< $@
-