From 91e267bcc42442d4e9da09aab30065ad5d44025a Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:37:45 -0500 Subject: Remove non-USB boards Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around. --- bootloaders/atmega/Makefile | 238 -------------------------------------------- 1 file changed, 238 deletions(-) delete mode 100755 bootloaders/atmega/Makefile (limited to 'bootloaders/atmega/Makefile') diff --git a/bootloaders/atmega/Makefile b/bootloaders/atmega/Makefile deleted file mode 100755 index efe92e6..0000000 --- a/bootloaders/atmega/Makefile +++ /dev/null @@ -1,238 +0,0 @@ -# Makefile for ATmegaBOOT -# E.Lins, 18.7.2005 -# -# Instructions -# -# To make bootloader .hex file: -# make diecimila -# make lilypad -# make ng -# etc... -# -# To burn bootloader .hex file: -# make diecimila_isp -# make lilypad_isp -# make ng_isp -# etc... - -# program name should not be changed... -PROGRAM = ATmegaBOOT_168 - -# enter the parameters for the avrdude isp tool -ISPTOOL = stk500v2 -ISPPORT = usb -ISPSPEED = -b 115200 - -MCU_TARGET = atmega168 -LDSECTION = --section-start=.text=0x3800 - -# the efuse should really be 0xf8; since, however, only the lower -# three bits of that byte are used on the atmega168, avrdude gets -# confused if you specify 1's for the higher bits, see: -# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ -# -# similarly, the lock bits should be 0xff instead of 0x3f (to -# unlock the bootloader section) and 0xcf instead of 0x0f (to -# lock it), but since the high two bits of the lock byte are -# unused, avrdude would get confused. - -ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ --e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m -ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ --U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m - -STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" -STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ --lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt -STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt - - -OBJ = $(PROGRAM).o -OPTIMIZE = -Os - -DEFS = -LIBS = - -CC = avr-gcc - -# Override is only needed by avr-lib build system. - -override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) -override LDFLAGS = -Wl,$(LDSECTION) -#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) - -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump - -all: - -lilypad: TARGET = lilypad -lilypad: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -lilypad: AVR_FREQ = 8000000L -lilypad: $(PROGRAM)_lilypad.hex - -lilypad_isp: lilypad -lilypad_isp: TARGET = lilypad -lilypad_isp: HFUSE = DD -lilypad_isp: LFUSE = E2 -lilypad_isp: EFUSE = 00 -lilypad_isp: isp - -lilypad_resonator: TARGET = lilypad_resonator -lilypad_resonator: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' -lilypad_resonator: AVR_FREQ = 8000000L -lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex - -lilypad_resonator_isp: lilypad_resonator -lilypad_resonator_isp: TARGET = lilypad_resonator -lilypad_resonator_isp: HFUSE = DD -lilypad_resonator_isp: LFUSE = C6 -lilypad_resonator_isp: EFUSE = 00 -lilypad_resonator_isp: isp - -pro8: TARGET = pro_8MHz -pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -pro8: AVR_FREQ = 8000000L -pro8: $(PROGRAM)_pro_8MHz.hex - -pro8_isp: pro8 -pro8_isp: TARGET = pro_8MHz -pro8_isp: HFUSE = DD -pro8_isp: LFUSE = C6 -pro8_isp: EFUSE = 00 -pro8_isp: isp - -pro16: TARGET = pro_16MHz -pro16: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -pro16: AVR_FREQ = 16000000L -pro16: $(PROGRAM)_pro_16MHz.hex - -pro16_isp: pro16 -pro16_isp: TARGET = pro_16MHz -pro16_isp: HFUSE = DD -pro16_isp: LFUSE = C6 -pro16_isp: EFUSE = 00 -pro16_isp: isp - -pro20: TARGET = pro_20mhz -pro20: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -pro20: AVR_FREQ = 20000000L -pro20: $(PROGRAM)_pro_20mhz.hex - -pro20_isp: pro20 -pro20_isp: TARGET = pro_20mhz -pro20_isp: HFUSE = DD -pro20_isp: LFUSE = C6 -pro20_isp: EFUSE = 00 -pro20_isp: isp - -diecimila: TARGET = diecimila -diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -diecimila: AVR_FREQ = 16000000L -diecimila: $(PROGRAM)_diecimila.hex - -diecimila_isp: diecimila -diecimila_isp: TARGET = diecimila -diecimila_isp: HFUSE = DD -diecimila_isp: LFUSE = FF -diecimila_isp: EFUSE = 00 -diecimila_isp: isp - -ng: TARGET = ng -ng: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -ng: AVR_FREQ = 16000000L -ng: $(PROGRAM)_ng.hex - -ng_isp: ng -ng_isp: TARGET = ng -ng_isp: HFUSE = DD -ng_isp: LFUSE = FF -ng_isp: EFUSE = 00 -ng_isp: isp - -atmega328: TARGET = atmega328 -atmega328: MCU_TARGET = atmega328p -atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -atmega328: AVR_FREQ = 16000000L -atmega328: LDSECTION = --section-start=.text=0x7800 -atmega328: $(PROGRAM)_atmega328.hex - -atmega328_isp: atmega328 -atmega328_isp: TARGET = atmega328 -atmega328_isp: MCU_TARGET = atmega328p -atmega328_isp: HFUSE = DA -atmega328_isp: LFUSE = FF -atmega328_isp: EFUSE = 05 -atmega328_isp: isp - -atmega328_notp: TARGET = atmega328_notp -atmega328_notp: MCU_TARGET = atmega328 -atmega328_notp: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -atmega328_notp: AVR_FREQ = 16000000L -atmega328_notp: LDSECTION = --section-start=.text=0x7800 -atmega328_notp: $(PROGRAM)_atmega328_notp.hex - -atmega328_notp_isp: atmega328_notp -atmega328_notp_isp: TARGET = atmega328 -atmega328_notp_isp: MCU_TARGET = atmega328 -atmega328_notp_isp: HFUSE = DA -atmega328_notp_isp: LFUSE = FF -atmega328_notp_isp: EFUSE = 05 -atmega328_notp_isp: isp - -atmega328_pro8: TARGET = atmega328_pro_8MHz -atmega328_pro8: MCU_TARGET = atmega328p -atmega328_pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED -atmega328_pro8: AVR_FREQ = 8000000L -atmega328_pro8: LDSECTION = --section-start=.text=0x7800 -atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex - -atmega328_pro8_isp: atmega328_pro8 -atmega328_pro8_isp: TARGET = atmega328_pro_8MHz -atmega328_pro8_isp: MCU_TARGET = atmega328p -atmega328_pro8_isp: HFUSE = DA -atmega328_pro8_isp: LFUSE = FF -atmega328_pro8_isp: EFUSE = 05 -atmega328_pro8_isp: isp - -mega: TARGET = atmega1280 -mega: MCU_TARGET = atmega1280 -mega: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 -mega: AVR_FREQ = 16000000L -mega: LDSECTION = --section-start=.text=0x1F000 -mega: $(PROGRAM)_atmega1280.hex - -mega_isp: mega -mega_isp: TARGET = atmega1280 -mega_isp: MCU_TARGET = atmega1280 -mega_isp: HFUSE = DA -mega_isp: LFUSE = FF -mega_isp: EFUSE = F5 -mega_isp: isp - -isp: $(TARGET) - $(ISPFUSES) - $(ISPFLASH) - -isp-stk500: $(PROGRAM)_$(TARGET).hex - $(STK500-1) - $(STK500-2) - -%.elf: $(OBJ) - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) - -clean: - rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex - -%.lst: %.elf - $(OBJDUMP) -h -S $< > $@ - -%.hex: %.elf - $(OBJCOPY) -j .text -j .data -O ihex $< $@ - -%.srec: %.elf - $(OBJCOPY) -j .text -j .data -O srec $< $@ - -%.bin: %.elf - $(OBJCOPY) -j .text -j .data -O binary $< $@ - -- cgit v1.2.3-18-g5258