1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
|
/*
Pachube client with Strings
This sketch connects two analog sensors to Pachube (http://www.pachube.com)
through a Telefonica GSM/GPRS shield.
This example has been updated to use version 2.0 of the Pachube.com API.
To make it work, create a feed with two datastreams, and give them the IDs
sensor1 and sensor2. Or change the code below to match your feed.
This example uses the String library, which is part of the Arduino core from
version 0019.
Circuit:
* Analog sensors attached to A0 and A1
* GSM shield attached to an Arduino
* SIM card with a data plan
created 8 March 2012
by Tom Igoe
and adapted for GSM shield by David Del Peral
This code is in the public domain.
*/
// Include the GSM library
#include <GSM.h>
// Pachube login information
#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here
#define FEEDID 00000 // replace your feed ID
#define USERAGENT "My Project" // user agent is the project name
// PIN Number
#define PINNUMBER ""
// APN data
#define GPRS_APN "GPRS_APN" // replace your GPRS APN
#define GPRS_LOGIN "login" // replace with your GPRS login
#define GPRS_PASSWORD "password" // replace with your GPRS password
// initialize the library instance
GSMClient client;
GPRS gprs;
GSM gsmAccess;
// if you don't want to use DNS (and reduce your sketch size)
// use the numeric IP instead of the name for the server:
// IPAddress server(216,52,233,121); // numeric IP for api.pachube.com
char server[] = "api.pachube.com"; // name address for Pachube API
unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds
boolean lastConnected = false; // state of the connection last time through the main loop
const unsigned long postingInterval = 10*1000; // delay between updates to Pachube.com
void setup()
{
// initialize serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// connection state
boolean notConnected = true;
// After starting the modem with GSM.begin()
// attach the shield to the GPRS network with the APN, login and password
while(notConnected)
{
if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
(gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
notConnected = false;
else
{
Serial.println("Not connected");
delay(1000);
}
}
Serial.println("Connected to GPRS network");
}
void loop()
{
// read the sensor on A0
int sensorReading = analogRead(A0);
// convert the data to a String
String dataString = "sensor1,";
dataString += sensorReading;
// you can append multiple readings to this String to
// send the pachube feed multiple values
int otherSensorReading = analogRead(A1);
dataString += "\nsensor2,";
dataString += otherSensorReading;
// if there's incoming data from the net connection.
// send it out the serial port. This is for debugging
// purposes only
if (client.available())
{
char c = client.read();
Serial.print(c);
}
// if there's no net connection, but there was one last time
// through the loop, then stop the client
if (!client.connected() && lastConnected)
{
Serial.println();
Serial.println("disconnecting.");
client.stop();
}
// if you're not connected, and ten seconds have passed since
// your last connection, then connect again and send data
if(!client.connected() && (millis() - lastConnectionTime > postingInterval))
{
sendData(dataString);
}
// store the state of the connection for next time through
// the loop
lastConnected = client.connected();
}
// this method makes a HTTP connection to the server
void sendData(String thisData)
{
// if there's a successful connection:
if (client.connect(server, 80))
{
Serial.println("connecting...");
// send the HTTP PUT request:
client.print("PUT /v2/feeds/");
client.print(FEEDID);
client.println(".csv HTTP/1.1");
client.println("Host: api.pachube.com");
client.print("X-ApiKey: ");
client.println(APIKEY);
client.print("User-Agent: ");
client.println(USERAGENT);
client.print("Content-Length: ");
client.println(thisData.length());
// last pieces of the HTTP PUT request
client.println("Content-Type: text/csv");
client.println("Connection: close");
client.println();
// here's the actual content of the PUT request
client.println(thisData);
}
else
{
// if you couldn't make a connection
Serial.println("connection failed");
Serial.println();
Serial.println("disconnecting.");
client.stop();
}
// note the time that the connection was made or attempted:
lastConnectionTime = millis();
}
|
