arduino-avr-xinput - A fork of Dmadison's Xinput Arduino avr core with a package.json

Age	Commit message (Collapse)	Author
2022-03-07	rename arduino core dir to xinputHEAD master	HampusM

2020-11-01	Improve reading ADC result	Vitaly Shmagun
	7.3.0-atmel3.6.1-arduino7 gcc fails to optimize separate reading from ADCL and ADCH. It produces additionally three eor commands or in some cases two mov commands in the assembly code (see discussion #344). These commands swap register contents before store them to data area. So they are completely unnecessary. Reading ADC result with ADC macro fixes it and gcc generates the right code..
2020-05-02	Update comment on wiring_analog.c	Maximilian Leopold

2016-09-07	Requested changes to not change code for non ATtinyX5s	Niklas Mischkulnig

2016-08-27	Add all analog references supported by the ATtinyX5 series	Niklas Mischkulnig

2015-07-03	Removed a handful of SVN expansion keywords. See #277	Federico Fissore

2014-05-16	Support TIMER1C	Matthijs Kooijman
	Some devices, such as the atmega2560 or the atmega256rfr2 have a timer1c output. It seems this output is not connected to anything on the Arduino Mega, but this allows using it on third party hardware nonetheless.
2013-07-31	Merge branch 'issue1366' of github.com:Lauszus/Arduino into Lauszus-issue1366	Cristian Maglie

2013-05-02	Removed double instance of the same code	Kristian Sloth Lauszus

2013-04-18	Check if ATmega32u4 is defined	Kristian Sloth Lauszus
	Needed in order to work with Arduino Leonardo
2013-04-18	Removed call to analogPinToChannel for Leonardo	Kristian Sloth Lauszus

2013-04-17	Use analogPinToChannel if it's defined	Kristian Sloth Lauszus

2013-04-04	Added support for all variants of Sanguino	Kristian Sloth Lauszus

2013-03-06	Use analogPinToChannel() macro if present for ATtiny25/45/85.	David A. Mellis
	This allows use of A0, A1, A2, A3 constants and for them to be mapped to the appropriate analog input channel. It should only be used if the macro is actually defined.
2012-10-09	Adding ATmega644P check to ATmega1284P check.	David A. Mellis

2012-04-19	bugfix for configuring PWM on D6 and D13 too early. (thanks to Limor Fried)	Zach Eveland
	was starting PWM on these pins too soon - in init() instead of when analogWrite() was called. as a result doing output on port registers directly failed.
2012-04-19	bugfix for boards with a timer 4 but no channel D	Zach Eveland
	compilation failed for Mega because the COM4D1 and OCR4D registers are defined for 32U4 but not for Mega
2012-03-03	Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader	Zach Eveland
	Conflicts: .gitignore
2012-03-02	Small changes for the ATmega1284.	David A. Mellis
	http://code.google.com/p/arduino/issues/detail?id=736
2011-12-18	fixed digitalWrite on timer 4 pins (D6 and D13)	Zach Eveland

2011-12-11	fixed TIMER4 use on Leonardo	Zach Eveland
	ATMEGA32U4 has major differences in TIMER4 registers compared to ATMEGA1280 and 2560. turnOffPWM, analogWrite, and initialize routines had wrong registers, bit names, etc.
2011-11-16	Fixed handling of Ax constants on Leonardo	Zach Eveland
	Fixed mistake in assignment and handling of A6-A11 constants. Renumbered constants for all Ax channels.
2011-09-16	added support for TIMER4D used for PWM on Leonardo and Micro D6	Zach Eveland

2011-09-13	fixed analog pin mapping for 32u4	Zach Eveland

2011-02-18	Revert "Adding noAnalogWrite() function to disable PWM."	David A. Mellis
	This reverts commit 38d4a34fec6925b29a732d13e200f54ee4b42025.
2011-02-12	Adding noAnalogWrite() function to disable PWM.	David A. Mellis
	Also, removing the inline version of digitalPinToTimer() (since we're not optimizing the functions that use it anyway). The noAnalogWrite() function is in wiring_analog.c, deriving from the previous turnOffPWM() which has moved from wiring_digital.c. http://code.google.com/p/arduino/issues/detail?id=476
2010-10-17	Modifying basic functions (digital and analog, read and write) to use ↵	David A. Mellis
	register-based ifdefs, not cpu-based. http://code.google.com/p/arduino/issues/detail?id=307 http://code.google.com/p/arduino/issues/detail?id=316 http://code.google.com/p/arduino/issues/detail?id=323 http://code.google.com/p/arduino/issues/detail?id=324
2010-09-08	1280 -> 1280/2560.	David A. Mellis

2010-05-16	Adding A0=14, A1=15, etc. aliases for analog input pins and modifying ↵	David A. Mellis
	analogRead() to accept them (in addition to 0, 1, 2, etc.). Removing some unused code elsewhere.
2009-11-21	Improving third-party hardware support:	David A. Mellis
	- moving back to multple cores per platform - using target instead of platform - moving per-board and per-programmer preferences out of Preferences.java and into a new Target class - adding a new "target" preference - support for platform:value values in board preferences for bootloader path and core - XXX: need to support platform:value syntax for board upload.using preferences.
2009-11-07	Moving things around.	David A. Mellis

2009-08-23	Undoing revision 628 because it broke analogRead() on analog inputs 8 to 15 ↵	David A. Mellis
	of the Arduino Mega.
2009-06-15	Changing analog read channel mask from 0x07 to 0x0f to allow for reading of ↵	David A. Mellis
	the temperature and other extended channels.
2009-06-01	First integration of the Arduino code in Processing 5503: PreProcessor and ↵	David A. Mellis
	Compiler have been integrated with changes to the Sketch. Compilation still has problems (Thread error on success, and can't handle non-pde files in a sketch). Modified the Mac OS X make.sh to copy the hardware, avr tools, and example over. Removing some of the antlr stuff. Disabling the Commander (command-line execution) for now. Added Library, LibraryManager, and Target. Added support for prefixed preferences (e.g. for boards and programmers).