aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-30Created an abstract base class UDP to match the Client and Server classes, ↵amcewen
and reworked the Ethernet library to use it and derive EthernetUDP.
2011-08-30support for non-Leonardo boards is back!Zach Eveland
2011-08-30CDC and HID write() routines now return non-void - brought in line with new ↵Zach Eveland
write behavior
2011-08-30brought leonardo folder in line with new variants schemeZach Eveland
2011-08-30Merge branch 'mainline' into new-extensionZach Eveland
2011-08-29Changed names of the Ethernet classes: Client -> EthernetClient, NetClient ↵amcewen
-> Client, and basic testing performed
2011-08-28Final changes to integrate latest core updates to WiFly branchamcewen
2011-08-28Merge branch 'master' into wifly_integrationamcewen
2011-08-27auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to ↵Zach Eveland
support 300 bps connection, changed core and boards.txt to match
2011-08-27Merge branch 'new-extension' of https://github.com/arduino/Arduinoamcewen
2011-08-27bootloader ends as soon as sketch upload finishes. restored pulsing of LED ↵Zach Eveland
while bootloader running.
2011-08-26Moving write errors out of return value into separate API methods.David A. Mellis
write(), print(), println() now return size_t (and don't use negative values to signal errors). Print adds writeError() for checking for write errors, clearWriteError() to reset the flag to false, and a protected setWriteError() for signalling errors. http://code.google.com/p/arduino/issues/detail?id=598
2011-08-26Changing from long to ssize_t (int) for write(), print(), println() return.David A. Mellis
2011-08-24bugfix - Serial.write() would try to send even if no CDC connection was open.Zach Eveland
2011-08-24changed auto-reset method for upload: now triggered by opening port at 1200 bpsZach Eveland
2011-08-23write(), print(), and println() now return number of bytes written.David A. Mellis
The type is long, and negative values indicate errors. Needs more testing. http://code.google.com/p/arduino/issues/detail?id=551
2011-08-23Distinguishing those boards with eight analog inputs (Fio, BT, Nano, Mini).David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=499
2011-08-23Renaming pins/ directory to the more generic variants/David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=588
2011-08-18USB microcontrollers will call USB.attach() after init(), before setup()Zach Eveland
2011-08-18HW Serial on pins 0 and 1 works. Accessed by Serial1.* methodsZach Eveland
2011-08-18Stream.readBytesUntil() now writes null terminator within length.David A. Mellis
2011-08-17A few API changes to new Stream parsing functions.David A. Mellis
Renamed readChars() -> readBytes(), readCharsUntil() -> readBytesUntil(). Changed timeouts to milliseconds from seconds; default from 5 to 1 seconds. Removed readCharsBetween().
2011-08-17Integrating Stream searching & parsing (Michael Margolis)David A. Mellis
This from Michael's TextFinder library, incorporated into the Stream class: find(), findUntil(), parseInt(), parseFloat(), readChars(), readCharsUntil(), readCharsBetween(), setTimeout().
2011-08-16Temporary fix for auto-reset from IDE. Will reset chip when DTR is ↵Zach Eveland
asserted, no matter what CDC baud rate is selected.
2011-08-14Serial via USB worksZach Eveland
Integrated rest of Peter's USB implementation
2011-08-14LEDs for D13, TX, and RX are more in line with Uno-like behavior during ↵Zach Eveland
sketch uploading. D13 flashes on reboot, TX and RX flash with USB data transfer.
2011-08-14rebuilt Diskloader, added LED control macros for Leonardo, removed ↵Zach Eveland
Microtouch defines
2011-08-14increased bootloader delay to approx. 3.5 sZach Eveland
2011-08-12Adding basic macros for analog + digital pin information.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=495
2011-08-12Adding pin-change interrupt pin mapping macros to pins_arduino.h.David A. Mellis
http://code.google.com/p/arduino/issues/detail?id=490
2011-08-12Adding SCL, SDA, and LED #defines.David A. Mellis
2011-08-11cleaned up types. set D5 as not a PWM pin for now.Zach Eveland
2011-08-11committed USB API, initial HardwareSerial-USBSerial integrationZach Eveland
2011-08-11diskloader source and binary for 32u4Zach Eveland
2011-08-10support for 32u4 and Leonardo pins, uploading, and bootloader programmingZach Eveland
2011-06-29Disabling terminal / monitor.David A. Mellis
2011-06-14Oops. Add atmega8.lst/hex and atmega168.lst/hex to controlled files.WestfW
2011-06-14Allow the READ PARAMETER command to return our version number.WestfW
(significant size impact: 14 bytes!) Initialized "address" to eliminate compiler warning (4 bytes!) Add "atmega168" as a more accurate target name than "diecimila" (keep diecimila as well for backward compatibility) Reduce the .hex and .lst targets that are stored in source control to the three basics: atmega8, atmega168, atmega328. The other targets remain in the makefile and makeall, but will need to be built from source if wanted. Which should be less of a problem now that the source is buildable without installing crosspack.
2011-06-14Modify Uno "lock" bits in boards.txt to make bootloader readable byWestfW
sketches. Part of http://code.google.com/p/arduino/issues/detail?id=554
2011-06-13http://code.google.com/p/arduino/issues/detail?id=368WestfW
Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.))
2011-06-11Merge remote branch 'upstream/new-extension'amcewen
Moved my fork to the Arduino 1.0 codebase
2011-06-11(make sure .hex and .lst are updated as well.)WestfW
2011-06-11Fix errors in LDSECTIONS refactoringWestfW
(found during atmega8 testing.)
2011-06-10Update version to reflect previous edit. Sigh.WestfW
2011-06-10Shrink code by using registers for variables "length" and "address"WestfW
http://code.google.com/p/optiboot/issues/detail?id=33 Fix high-value watchdog timeouts on ATmega8 http://code.google.com/p/optiboot/issues/detail?id=38 Change "start app on bad commands" code to start the app via the watchdog timer, so that the app is always started with the chip in fully reset state. http://code.google.com/p/optiboot/issues/detail?id=37
2011-06-10Add a version number to the optiboot source and binary.WestfW
http://code.google.com/p/arduino/issues/detail?id=554 end of flash memory where they can be read (at least in theory) by device programmers, hex-file examination, or application programs. This is done by putting the version number in a separate section (".version"), and using linker/objcopy magic to locate that section as appropriate for the target chip. (See http://lists.gnu.org/archive/html/avr-gcc-list/2011-02/msg00016.html for some discussion on the details.) Start the version at 4.1 (the last "packaged" version of optiboot was called version 3, so the "top of source" would be 4.0, and adding the version number makes 4.1) Refactor LDSECTION in the Makefile to LDSECTIONS so that multiple section start addresses can be defined. Change the _isp makefile definitions to make the bootloader section readable (but not writable) by the application section. (This would need to be done elsewhere as well to handle all bootloader programming techniques. Notably Arduino's boards.txt Note that this change does not change the "code" portion of optiboot at all. The only diffs in the .hex files are the added version word at the end of flash memory.
2011-06-10Update shell script makeallWestfW
2011-06-10This is a relatively significant edit that brings the Arduino copy ofWestfW
optiboot up-to-date with the optiboot source repository as of Jun-2011 (the last changes made in the optiboot repository were in Oct-2010) This adds support for several plaforms, fixes the "30k bug", and refactors the source to have separate stk500.h, boot.h, and pin_defs.h These are the arduino opticode issues fixed: http://code.google.com/p/arduino/issues/detail?id=380 optiboot has problems upload sketches bigger than 30 KB http://code.google.com/p/arduino/issues/detail?id=556 update optiboot to the point of the latest optiboot project sources. These are issues that had been solved in the optiboot source aready: http://code.google.com/p/arduino/issues/detail?id=364 optiboot leaves timer1 configured when starting app, breaks PWM on pin 9 and 10. (fixed with a workaround in arduino core.) aka http://code.google.com/p/optiboot/source/detail?r=c778fbe72df6ac13ef730c25283358c3c970f73e Support for ATmega8 and mega88. Fix fuse settings for mega168 _ISP targets Additional new platforms (mega, sanguino) http://code.google.com/p/optiboot/issues/detail?id=26 Set R1 to 0 (already in arduino code) http://code.google.com/p/optiboot/issues/detail?id=36&can=1 Fails to build correctly for mega88 After this commit, the only differences between the Arduino optiboot.c and the optiboot repository optiboot.c are cosmetic.
2011-06-09http://code.google.com/p/arduino/issues/detail?id=517WestfW
Remove the trailing comments when setting fuse values for the various *_isp targets, so that they won't cause avrdude errors. This was done the same way as in the optiboot source tree: http://code.google.com/p/optiboot/issues/detail?id=17 http://code.google.com/p/optiboot/source/detail?r=005fb033fc08c551b2f86f7c90c5db21549b3f20
2011-06-09Makefile modification to allow building optiboot in more environments.WestfW
Allows building within the Arduino Source tree, and within the Arduino IDE tree, as well as using CrossPack on Mac. Adds README.TXT to track arduino-specific changes (and documents the new build options.) This addresses Arduino issue: http://code.google.com/p/arduino/issues/detail?id=487 And optiboot issue http://code.google.com/p/optiboot/issues/detail?id=1 (which can be thought of as a subset of the Arduno issue.) Note that the binaries produced after these Makefile changes (using any of the compile environments) are identical to those produced by the crosspack-20100115 environment on a Mac.
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-27 09:13:41 +0000