1 files changed, 0 insertions, 138 deletions
diff --git a/libraries/WiFi/examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino b/libraries/WiFi/examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino
deleted file mode 100644
index 96eb628..0000000
--- a/libraries/WiFi/examples/WiFiWebClientRepeating/WiFiWebClientRepeating.ino
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
-  Repeating Wifi Web client
- 
- This sketch connects to a a web server and makes a request
- using an Arduino Wifi shield.
- 
- Circuit:
- * Wifi shield attached to pins 10, 11, 12, 13
- 
- created 23 April 2012
- modifide 31 May 2012
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/WifiWebClientRepeating
- This code is in the public domain.
- */
-
-#include <SPI.h>
-#include <WiFi.h>
-
-char ssid[] = "yourNetwork";      //  your network SSID (name) 
-char pass[] = "secretPassword";   // your network password
-int keyIndex = 0;            // your network key Index number (needed only for WEP)
-
-int status = WL_IDLE_STATUS;
-
-// Initialize the Wifi client library
-WiFiClient client;
-
-// server address:
-char server[] = "www.arduino.cc";
-//IPAddress server(64,131,82,241);
-
-unsigned long lastConnectionTime = 0;           // last time you connected to the server, in milliseconds
-boolean lastConnected = false;                  // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  // delay between updates, in milliseconds
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-  
-  // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to SSID: ");
-    Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
-    status = WiFi.begin(ssid, pass);
-
-    // wait 10 seconds for connection:
-    delay(10000);
-  } 
-  // you're connected now, so print out the status:
-  printWifiStatus();
-}
-
-void loop() {
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only:
-  while (client.available()) {
-    char c = client.read();
-    Serial.write(c);
-  }
-
-  // if there's no net connection, but there was one last time
-  // through the loop, then stop the client:
-  if (!client.connected() && lastConnected) {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-
-  // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data:
-  if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
-    httpRequest();
-  }
-  // store the state of the connection for next time through
-  // the loop:
-  lastConnected = client.connected();
-}
-
-// this method makes a HTTP connection to the server:
-void httpRequest() {
-  // if there's a successful connection:
-  if (client.connect(server, 80)) {
-    Serial.println("connecting...");
-    // send the HTTP PUT request:
-    client.println("GET /latest.txt HTTP/1.1");
-    client.println("Host: www.arduino.cc");
-    client.println("User-Agent: arduino-ethernet");
-    client.println("Connection: close");
-    client.println();
-
-    // note the time that the connection was made:
-    lastConnectionTime = millis();
-  } 
-  else {
-    // if you couldn't make a connection:
-    Serial.println("connection failed");
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-}
-
-
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-}
-
-
-
-
-
-