1 files changed, 0 insertions, 111 deletions
diff --git a/libraries/WiFi/examples/WiFiChatServer/WiFiChatServer.ino b/libraries/WiFi/examples/WiFiChatServer/WiFiChatServer.ino
deleted file mode 100644
index e4b1d1a..0000000
--- a/libraries/WiFi/examples/WiFiChatServer/WiFiChatServer.ino
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- Chat  Server
- 
- A simple server that distributes any incoming messages to all
- connected clients.  To use telnet to  your device's IP address and type.
- You can see the client's input in the serial monitor as well.
- 
- This example is written for a network using WPA encryption. For 
- WEP or WPA, change the Wifi.begin() call accordingly.
- 
- 
- Circuit:
- * WiFi shield attached
- 
- created 18 Dec 2009
- by David A. Mellis
- modified 31 May 2012
- by Tom Igoe
- 
- */
-
-#include <SPI.h>
-#include <WiFi.h>
-
-char ssid[] = "yourNetwork"; //  your network SSID (name) 
-char pass[] = "secretPassword";    // your network password (use for WPA, or use as key for WEP)
-
-int keyIndex = 0;            // your network key Index number (needed only for WEP)
-
-int status = WL_IDLE_STATUS;
-
-WiFiServer server(23);
-
-boolean alreadyConnected = false; // whether or not the client was connected previously
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600); 
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // check for the presence of the shield:
-  if (WiFi.status() == WL_NO_SHIELD) {
-    Serial.println("WiFi shield not present"); 
-    // don't continue:
-    while(true);
-  } 
-  
-  // attempt to connect to Wifi network:
-  while ( status != WL_CONNECTED) { 
-    Serial.print("Attempting to connect to SSID: ");
-    Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:    
-    status = WiFi.begin(ssid, pass);
-
-    // wait 10 seconds for connection:
-    delay(10000);
-  } 
-  // start the server:
-  server.begin();
-  // you're connected now, so print out the status:
-  printWifiStatus();
- }
-
-
-void loop() {
-  // wait for a new client:
-  WiFiClient client = server.available();
-
-
-  // when the client sends the first byte, say hello:
-  if (client) {
-    if (!alreadyConnected) {
-      // clead out the input buffer:
-      client.flush();    
-      Serial.println("We have a new client");
-      client.println("Hello, client!"); 
-      alreadyConnected = true;
-    } 
-
-    if (client.available() > 0) {
-      // read the bytes incoming from the client:
-      char thisChar = client.read();
-      // echo the bytes back to the client:
-      server.write(thisChar);
-      // echo the bytes to the server as well:
-      Serial.write(thisChar);
-    }
-  }
-}
-
-
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your WiFi shield's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-}
-
-