diff options
Diffstat (limited to 'libraries/TFT/examples/Esplora')
8 files changed, 547 insertions, 0 deletions
diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino new file mode 100644 index 0000000..3d3f230 --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/EsploraTFTBitmapLogo.ino @@ -0,0 +1,101 @@ +/* + + Esplora TFT Bitmap Logos + + This example for the Arduino TFT screen is for use + with an Arduino Esplora. + + This example reads an image file from a micro-SD card + and draws it on the screen, at random locations. + + There is a .bmp file included with this sketch. + - open the sketch folder (Ctrl-K or Cmd-K) + - copy the "arduino.bmp" file to a micro-SD + - put the SD into the SD slot of the Arduino LCD module. + + This example code is in the public domain. + + Created 19 April 2013 by Enrico Gueli + + http://arduino.cc/en/Tutorial/EsploraTFTBitmapLogo + + */ + +// include the necessary libraries +#include <Esplora.h> +#include <SPI.h> +#include <SD.h> +#include <TFT.h> // Arduino LCD library + +// the Esplora pin connected to the chip select line for SD card +#define SD_CS 8 + +// this variable represents the image to be drawn on screen +PImage logo; + +void setup() { + // initialize the GLCD and show a message + // asking the user to open the serial line + EsploraTFT.begin(); + EsploraTFT.background(255, 255, 255); + + EsploraTFT.stroke(0, 0, 255); + EsploraTFT.println(); + EsploraTFT.println("Arduino LCD Bitmap Example"); + EsploraTFT.stroke(0, 0, 0); + EsploraTFT.println("Open serial monitor"); + EsploraTFT.println("to run the sketch"); + + // initialize the serial port: it will be used to + // print some diagnostic info + Serial.begin(9600); + while (!Serial) { + // wait for serial monitor to be open + } + + // try to access the SD card. If that fails (e.g. + // no card present), the Esplora's LED will turn red. + Serial.print("Initializing SD card..."); + if (!SD.begin(SD_CS)) { + Serial.println("failed!"); + Esplora.writeRed(255); + return; + } + Serial.println("OK!"); + + // clear the GLCD screen before starting + EsploraTFT.background(255, 255, 255); + + // now that the SD card can be access, try to load the + // image file. The Esplora LED will turn green or red if + // the loading went OK or not. + Esplora.writeRGB(0, 0, 0); + logo = EsploraTFT.loadImage("arduino.bmp"); + if (logo.isValid()) { + Esplora.writeGreen(255); + } + else + Esplora.writeRed(255); + +} + +void loop() { + // don't do anything if the image wasn't loaded correctly. + if (logo.isValid() == false) { + return; + } + + Serial.println("drawing image"); + + // get a random location where to draw the image. + // To avoid the image to be draw outside the screen, + // take into account the image size. + int x = random(EsploraTFT.width() - logo.width()); + int y = random(EsploraTFT.height() - logo.height()); + + // draw the image to the screen + EsploraTFT.image(logo, x, y); + + // wait a little bit before drawing again + delay(1500); +} diff --git a/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp Binary files differnew file mode 100644 index 0000000..09c670a --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTBitmapLogo/arduino.bmp diff --git a/libraries/TFT/examples/Esplora/EsploraTFTColorPicker/EsploraTFTColorPicker.ino b/libraries/TFT/examples/Esplora/EsploraTFTColorPicker/EsploraTFTColorPicker.ino new file mode 100644 index 0000000..63a0ee2 --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTColorPicker/EsploraTFTColorPicker.ino @@ -0,0 +1,54 @@ +/* + + Esplora TFT Color Picker + + This example for the Esplora with an Arduino TFT reads + the input of the joystick and slider, using the values + to change the screen's color. + + This example code is in the public domain. + + Created 15 April 2013 by Scott Fitzgerald + + http://arduino.cc/en/Tutorial/TFTColorPicker + + */ + +#include <Esplora.h> +#include <TFT.h> // Arduino LCD library +#include <SPI.h> + +void setup() { + Serial.begin(9600); + + // initialize the LCD + EsploraTFT.begin(); + + // start out with a white screen + EsploraTFT.background(255, 255, 255); + +} + +void loop() { + + // map the values from sensors + int xValue = map(Esplora.readJoystickX(), -512, 512, 0, 255); // read the joystick's X position + int yValue = map(Esplora.readJoystickY(), -512, 512, 0, 255); // read the joystick's Y position + int slider = map(Esplora.readSlider(), 0, 1023, 0, 255); // read the slider's position + + // change the background color based on the mapped values + EsploraTFT.background(xValue, yValue, slider); + + // print the mapped values to the Serial monitor + Serial.print("background("); + Serial.print(xValue); + Serial.print(" , "); + Serial.print(yValue); + Serial.print(" , "); + Serial.print(slider); + Serial.println(")"); + + delay(33); + +} + diff --git a/libraries/TFT/examples/Esplora/EsploraTFTEtchASketch/EsploraTFTEtchASketch.ino b/libraries/TFT/examples/Esplora/EsploraTFTEtchASketch/EsploraTFTEtchASketch.ino new file mode 100644 index 0000000..a1430d3 --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTEtchASketch/EsploraTFTEtchASketch.ino @@ -0,0 +1,83 @@ +/* + + Esplora TFT EtchASketch + + This example for the Arduino TFT and Esplora draws + a white line on the screen, based on the position + of the joystick. To clear the screen, shake the + Esplora, using the values from the accelerometer. + + This example code is in the public domain. + + Created 15 April 2013 by Scott Fitzgerald + + http://arduino.cc/en/Tutorial/EsploraTFTEtchASketch + + */ + +#include <Esplora.h> +#include <TFT.h> // Arduino LCD library +#include <SPI.h> + +// initial position of the cursor +int xPos = EsploraTFT.width()/2; +int yPos = EsploraTFT.height()/2; + +void setup() { + // initialize the display + EsploraTFT.begin(); + + // clear the background + EsploraTFT.background(0,0,0); +} + +void loop() +{ + + int xAxis = Esplora.readJoystickX(); // read the X axis + int yAxis = Esplora.readJoystickY(); // read the Y axis + + // update the position of the line + // depending on the position of the joystick + if (xAxis<10 && xAxis>-10){ + xPos=xPos; + } + else{ + xPos = xPos + (map(xAxis, -512, 512, 2, -2)); + } + if (yAxis<10 && yAxis>-10){ + yAxis=yAxis; + } + else{ + yPos = yPos + (map(yAxis, -512, 512, -2, 2)); + } + +// don't let the point go past the screen edges + if(xPos > 159){ + (xPos = 159); + } + + if(xPos < 0){ + (xPos = 0); + } + if(yPos > 127){ + (yPos = 127); + } + + if(yPos < 0){ + (yPos = 0); + } + + // draw the point + EsploraTFT.stroke(255,255,255); + EsploraTFT.point(xPos,yPos); + + // check the accelerometer values and clear + // the screen if it is being shaken + if(abs(Esplora.readAccelerometer(X_AXIS))>200 || abs(Esplora.readAccelerometer(Y_AXIS))>200){ + EsploraTFT.background(0,0,0); + } + + delay(33); +} + diff --git a/libraries/TFT/examples/Esplora/EsploraTFTGraph/EsploraTFTGraph.ino b/libraries/TFT/examples/Esplora/EsploraTFTGraph/EsploraTFTGraph.ino new file mode 100644 index 0000000..7f2a427 --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTGraph/EsploraTFTGraph.ino @@ -0,0 +1,56 @@ +/* + + Esplora TFT Graph + + This example for the Esplora with an Arduino TFT reads + the value of the light sensor, and graphs the values on + the screen. + + This example code is in the public domain. + + Created 15 April 2013 by Scott Fitzgerald + + http://arduino.cc/en/Tutorial/EsploraTFTGraph + + */ + +#include <Esplora.h> +#include <TFT.h> // Arduino LCD library +#include <SPI.h> + +// position of the line on screen +int xPos = 0; + +void setup(){ + + // initialize the screen + EsploraTFT.begin(); + + // clear the screen with a nice color + EsploraTFT.background(250,16,200); +} + +void loop(){ + + // read the sensor value + int sensor = Esplora.readLightSensor(); + // map the sensor value to the height of the screen + int graphHeight = map(sensor,0,1023,0,EsploraTFT.height()); + + // draw the line in a pretty color + EsploraTFT.stroke(250,180,10); + EsploraTFT.line(xPos, EsploraTFT.height() - graphHeight, xPos, EsploraTFT.height()); + + // if the graph reaches the edge of the screen + // erase it and start over from the other side + if (xPos >= 160) { + xPos = 0; + EsploraTFT.background(250,16,200); + } + else { + // increment the horizontal position: + xPos++; + } + + delay(16); +} diff --git a/libraries/TFT/examples/Esplora/EsploraTFTHorizon/EsploraTFTHorizon.ino b/libraries/TFT/examples/Esplora/EsploraTFTHorizon/EsploraTFTHorizon.ino new file mode 100644 index 0000000..a7945c9 --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTHorizon/EsploraTFTHorizon.ino @@ -0,0 +1,63 @@ +/* + + Esplora TFT Horizon + + This example for the Arduino TFT and Esplora draws + a line on the screen that stays level with the ground + as you tile the Esplora side to side + + This example code is in the public domain. + + Created 15 April 2013 by Scott Fitzgerald + + http://arduino.cc/en/Tutorial/EsploraTFTHorizon + + */ + +#include <Esplora.h> +#include <TFT.h> // Arduino LCD library +#include <SPI.h> + +// horizontal start and end positions +int yStart = EsploraTFT.height()/2; +int yEnd = EsploraTFT.height()/2; + +// previous start and end positions +int oldEndY; +int oldStartY; + +void setup() { + // initialize the display + EsploraTFT.begin(); + // make the background black + EsploraTFT.background(0,0,0); +} + +void loop() +{ + // read the x-axis of te accelerometer + int tilt = Esplora.readAccelerometer(X_AXIS); + + // the values are 100 when tilted to the left + // and -100 when tilted to the right + // map these values to the start and end points + yStart = map(tilt,-100,100,EsploraTFT.height(),0); + yEnd = map(tilt,-100,100,0,EsploraTFT.height()); + + // if the previous values are different than the current values + // erase the previous line + if (oldStartY != yStart || oldEndY != yEnd) { + EsploraTFT.stroke(0,0,0); + EsploraTFT.line(0, oldStartY, EsploraTFT.width(), oldEndY); + } + + // draw the line in magenta + EsploraTFT.stroke(255,0,255); + EsploraTFT.line(0,yStart,EsploraTFT.width(),yEnd); + + // save the current start and end points + // to compare int he next loop + oldStartY= yStart; + oldEndY = yEnd; + delay(10); +} diff --git a/libraries/TFT/examples/Esplora/EsploraTFTPong/EsploraTFTPong.ino b/libraries/TFT/examples/Esplora/EsploraTFTPong/EsploraTFTPong.ino new file mode 100644 index 0000000..e3422d4 --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTPong/EsploraTFTPong.ino @@ -0,0 +1,126 @@ +/* + + Esplora TFT Pong + + This example for the Esplora with an Arduino TFT screen reads + the value of the joystick to move a rectangular platform + on the x and y axes. The platform can intersect with a ball + causing it to bounce. The Esplora's slider adjusts the speed + of the ball. + + This example code is in the public domain. + + Created by Tom Igoe December 2012 + Modified 15 April 2013 by Scott Fitzgerald + + http://arduino.cc/en/Tutorial/EsploraTFTPong + + */ + +#include <Esplora.h> +#include <TFT.h> // Arduino LCD library +#include <SPI.h> + +// variables for the position of the ball and paddle +int paddleX = 0; +int paddleY = 0; +int oldPaddleX, oldPaddleY; +int ballDirectionX = 1; +int ballDirectionY = 1; + +int ballX, ballY, oldBallX, oldBallY; + +void setup() { + + Serial.begin(9600); + + // initialize the display + EsploraTFT.begin(); + // set the background the black + EsploraTFT.background(0,0,0); +} + +void loop() { + // save the width and height of the screen + int myWidth = EsploraTFT.width(); + int myHeight = EsploraTFT.height(); + + // map the paddle's location to the joystick's position + paddleX = map(Esplora.readJoystickX(), 512, -512, 0, myWidth) - 20/2; + paddleY = map(Esplora.readJoystickY(), -512, 512, 0, myHeight) - 5/2; + Serial.print(paddleX); + Serial.print(" "); + Serial.println(paddleY); + + // set the fill color to black and erase the previous + // position of the paddle if different from present + EsploraTFT.fill(0,0,0); + + if (oldPaddleX != paddleX || oldPaddleY != paddleY) { + EsploraTFT.rect(oldPaddleX, oldPaddleY, 20, 5); + } + + // draw the paddle on screen, save the current position + // as the previous. + EsploraTFT.fill(255,255,255); + EsploraTFT.rect(paddleX, paddleY, 20, 5); + oldPaddleX = paddleX; + oldPaddleY = paddleY; + + // read the slider to determinde the speed of the ball + int ballSpeed = map(Esplora.readSlider(), 0, 1023, 0, 80)+1; + if (millis() % ballSpeed < 2) { + moveBall(); + } +} + + +// this function determines the ball's position on screen +void moveBall() { + // if the ball goes offscreen, reverse the direction: + if (ballX > EsploraTFT.width() || ballX < 0) { + ballDirectionX = -ballDirectionX; + } + + if (ballY > EsploraTFT.height() || ballY < 0) { + ballDirectionY = -ballDirectionY; + } + + // check if the ball and the paddle occupy the same space on screen + if (inPaddle(ballX, ballY, paddleX, paddleY, 20, 5)) { + ballDirectionY = -ballDirectionY; + } + + // update the ball's position + ballX += ballDirectionX; + ballY += ballDirectionY; + + // erase the ball's previous position + EsploraTFT.fill(0,0,0); + + if (oldBallX != ballX || oldBallY != ballY) { + EsploraTFT.rect(oldBallX, oldBallY, 5, 5); + } + + // draw the ball's current position + EsploraTFT.fill(255,255,255); + + EsploraTFT.rect(ballX, ballY, 5, 5); + + oldBallX = ballX; + oldBallY = ballY; + +} + +// this function checks the position of the ball +// to see if it intersects with the paddle +boolean inPaddle(int x, int y, int rectX, int rectY, int rectWidth, int rectHeight) { + boolean result = false; + + if ((x >= rectX && x <= (rectX + rectWidth)) && + (y >= rectY && y <= (rectY + rectHeight))) { + result = true; + } + + return result; +} diff --git a/libraries/TFT/examples/Esplora/EsploraTFTTemp/EsploraTFTTemp.ino b/libraries/TFT/examples/Esplora/EsploraTFTTemp/EsploraTFTTemp.ino new file mode 100644 index 0000000..b475d2d --- /dev/null +++ b/libraries/TFT/examples/Esplora/EsploraTFTTemp/EsploraTFTTemp.ino @@ -0,0 +1,64 @@ +/* + + Esplora TFT Temperature Display + + This example for the Arduino TFT screen is for use + with an Arduino Esplora. + + This example reads the temperature of the Esplora's + on board thermisistor and displays it on an attached + LCD screen, updating every second. + + This example code is in the public domain. + + Created 15 April 2013 by Scott Fitzgerald + + http://arduino.cc/en/Tutorial/EsploraTFTTemp + + */ + +// include the necessary libraries +#include <Esplora.h> +#include <TFT.h> // Arduino LCD library +#include <SPI.h> + +char tempPrintout[3]; // array to hold the temperature data + +void setup() { + + // Put this line at the beginning of every sketch that uses the GLCD + EsploraTFT.begin(); + + // clear the screen with a black background + EsploraTFT.background(0,0,0); + + // set the text color to magenta + EsploraTFT.stroke(200,20,180); + // set the text to size 2 + EsploraTFT.setTextSize(2); + // start the text at the top left of the screen + // this text is going to remain static + EsploraTFT.text("Degrees in C :\n ",0,0); + + // set the text in the loop to size 5 + EsploraTFT.setTextSize(5); +} + +void loop() { + + // read the temperature in Celcius and store it in a String + String temperature = String(Esplora.readTemperature(DEGREES_C)); + + // convert the string to a char array + temperature.toCharArray(tempPrintout, 3); + + // set the text color to white + EsploraTFT.stroke(255,255,255); + // print the temperature one line below the static text + EsploraTFT.text(tempPrintout, 0, 30); + + delay(1000); + // erase the text for the next loop + EsploraTFT.stroke(0,0,0); + EsploraTFT.text(tempPrintout, 0, 30); +} |