1 files changed, 108 insertions, 0 deletions
diff --git a/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino b/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino
new file mode 100644
index 0000000..da7a94d
--- /dev/null
+++ b/libraries/TFT/examples/Arduino/TFTBitmapLogo/TFTBitmapLogo.ino
@@ -0,0 +1,108 @@
+/*
+
+ Arduino TFT Bitmap Logo example
+ 
+ This example reads an image file from a micro-SD card
+ and draws it on the screen, at random locations.
+ 
+ In this sketch, the Arduino logo is read from a micro-SD card.
+ There is a .bmp file included with this sketch. 
+ - open the sketch folder (Ctrl-K or Cmd-K)
+ - copy the "arduino.bmp" file to a micro-SD
+ - put the SD into the SD slot of the Arduino TFT module.
+ 
+ This example code is in the public domain.
+ 
+ Created 19 April 2013 by Enrico Gueli
+ 
+ http://arduino.cc/en/Tutorial/TFTBitmapLogo
+ 
+ */
+ 
+// include the necessary libraries
+#include <SPI.h>
+#include <SD.h>
+#include <TFT.h>  // Arduino LCD library
+
+// pin definition for the Uno
+#define sd_cs  4
+#define lcd_cs 10
+#define dc     9
+#define rst    8  
+
+// pin definition for the Leonardo
+//#define sd_cs  8
+//#define lcd_cs 7
+//#define dc     0
+//#define rst    1  
+
+TFT TFTscreen = TFT(lcd_cs, dc, rst);
+
+// this variable represents the image to be drawn on screen
+PImage logo;
+
+
+void setup() {
+  // initialize the GLCD and show a message
+  // asking the user to open the serial line
+  TFTscreen.begin();
+  TFTscreen.background(255, 255, 255);
+
+  TFTscreen.stroke(0, 0, 255);
+  TFTscreen.println();
+  TFTscreen.println("Arduino TFT Bitmap Example");
+  TFTscreen.stroke(0, 0, 0);
+  TFTscreen.println("Open serial monitor");
+  TFTscreen.println("to run the sketch");
+
+  // initialize the serial port: it will be used to 
+  // print some diagnostic info  
+  Serial.begin(9600);
+  while (!Serial) {
+    // wait for serial line to be ready
+  }
+
+  // clear the GLCD screen before starting
+  TFTscreen.background(255, 255, 255);
+  
+  // try to access the SD card. If that fails (e.g.
+  // no card present), the setup process will stop.
+  Serial.print("Initializing SD card...");
+  if (!SD.begin(sd_cs)) {
+    Serial.println("failed!");
+    return;
+  }
+  Serial.println("OK!");
+  
+  // initialize and clear the GLCD screen
+  TFTscreen.begin();
+  TFTscreen.background(255, 255, 255);
+
+  // now that the SD card can be access, try to load the
+  // image file.
+  logo = TFTscreen.loadImage("arduino.bmp");
+  if (!logo.isValid()) {
+    Serial.println("error while loading arduino.bmp");
+  }
+}
+
+void loop() {
+  // don't do anything if the image wasn't loaded correctly.
+  if (logo.isValid() == false) {
+    return;
+  }
+  
+  Serial.println("drawing image");
+
+  // get a random location where to draw the image.
+  // To avoid the image to be draw outside the screen,
+  // take into account the image size.
+  int x = random(TFTscreen.width() - logo.width());
+  int y = random(TFTscreen.height() - logo.height());
+
+  // draw the image to the screen
+  TFTscreen.image(logo, x, y);
+
+  // wait a little bit before drawing again
+  delay(1500);
+}