1 files changed, 0 insertions, 68 deletions
diff --git a/libraries/LiquidCrystal/examples/setCursor/setCursor.pde b/libraries/LiquidCrystal/examples/setCursor/setCursor.pde
deleted file mode 100644
index edd2e77..0000000
--- a/libraries/LiquidCrystal/examples/setCursor/setCursor.pde
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
-  LiquidCrystal Library - setCursor
- 
- Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
- library works with all LCD displays that are compatible with the 
- Hitachi HD44780 driver. There are many of them out there, and you
- can usually tell them by the 16-pin interface.
- 
- This sketch prints to all the positions of the LCD using the
- setCursor(0 method:
- 
-  The circuit:
- * LCD RS pin to digital pin 12
- * LCD Enable pin to digital pin 11
- * LCD D4 pin to digital pin 5
- * LCD D5 pin to digital pin 4
- * LCD D6 pin to digital pin 3
- * LCD D7 pin to digital pin 2
- * 10K resistor:
- * ends to +5V and ground
- * wiper to LCD VO pin (pin 3)
- 
- Library originally added 18 Apr 2008
- by David A. Mellis
- library modified 5 Jul 2009
- by Limor Fried (http://www.ladyada.net)
- example added 9 Jul 2009
- by Tom Igoe 
-  modified 25 July 2009
- by David A. Mellis
- 
- http://www.arduino.cc/en/Tutorial/LiquidCrystal
- */
-
-// include the library code:
-#include <LiquidCrystal.h>
-
-// these constants won't change.  But you can change the size of
-// your LCD using them:
-const int numRows = 2;
-const int numCols = 16;
-
-// initialize the library with the numbers of the interface pins
-LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
-
-void setup() {
-  // set up the LCD's number of rows and columns: 
-  lcd.begin(numRows, numCols);
-}
-
-void loop() {
-  // loop from ASCII 'a' to ASCII 'z':
-  for (int thisLetter = 'a'; thisLetter <= 'z'; thisLetter++) {
-    // loop over the columns:
-    for (int thisCol = 0; thisCol < numRows; thisCol++) {
-      // loop over the rows:
-      for (int thisRow = 0; thisRow < numCols; thisRow++) {
-        // set the cursor position:
-        lcd.setCursor(thisRow,thisCol);
-        // print the letter:
-        lcd.print(thisLetter, BYTE);
-        delay(200);
-      }
-    }
-  }
-}
-
-