1 files changed, 0 insertions, 138 deletions
diff --git a/libraries/LiquidCrystal/examples/CustomCharacter/CustomCharacter.ino b/libraries/LiquidCrystal/examples/CustomCharacter/CustomCharacter.ino
deleted file mode 100644
index d3ce479..0000000
--- a/libraries/LiquidCrystal/examples/CustomCharacter/CustomCharacter.ino
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
-  LiquidCrystal Library - Custom Characters
- 
- Demonstrates how to add custom characters on an LCD  display.  
- The LiquidCrystal library works with all LCD displays that are 
- compatible with the  Hitachi HD44780 driver. There are many of 
- them out there, and you can usually tell them by the 16-pin interface.
- 
- This sketch prints "I <heart> Arduino!" and a little dancing man
- to the LCD.
- 
-  The circuit:
- * LCD RS pin to digital pin 12
- * LCD Enable pin to digital pin 11
- * LCD D4 pin to digital pin 5
- * LCD D5 pin to digital pin 4
- * LCD D6 pin to digital pin 3
- * LCD D7 pin to digital pin 2
- * LCD R/W pin to ground
- * 10K potentiometer:
- * ends to +5V and ground
- * wiper to LCD VO pin (pin 3)
- * 10K poterntiometer on pin A0
- 
- created21 Mar 2011
- by Tom Igoe
- Based on Adafruit's example at
- https://github.com/adafruit/SPI_VFD/blob/master/examples/createChar/createChar.pde
- 
- This example code is in the public domain.
- http://www.arduino.cc/en/Tutorial/LiquidCrystal
- 
- Also useful:
- http://icontexto.com/charactercreator/
- 
- */
-
-// include the library code:
-#include <LiquidCrystal.h>
-
-// initialize the library with the numbers of the interface pins
-LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
-
-// make some custom characters:
-byte heart[8] = {
-  0b00000,
-  0b01010,
-  0b11111,
-  0b11111,
-  0b11111,
-  0b01110,
-  0b00100,
-  0b00000
-};
-
-byte smiley[8] = {
-  0b00000,
-  0b00000,
-  0b01010,
-  0b00000,
-  0b00000,
-  0b10001,
-  0b01110,
-  0b00000
-};
-
-byte frownie[8] = {
-  0b00000,
-  0b00000,
-  0b01010,
-  0b00000,
-  0b00000,
-  0b00000,
-  0b01110,
-  0b10001
-};
-
-byte armsDown[8] = {
-  0b00100,
-  0b01010,
-  0b00100,
-  0b00100,
-  0b01110,
-  0b10101,
-  0b00100,
-  0b01010
-};
-
-byte armsUp[8] = {
-  0b00100,
-  0b01010,
-  0b00100,
-  0b10101,
-  0b01110,
-  0b00100,
-  0b00100,
-  0b01010
-};
-void setup() {
-  // create a new character
-  lcd.createChar(0, heart);
-  // create a new character
-  lcd.createChar(1, smiley);
-  // create a new character
-  lcd.createChar(2, frownie);
-  // create a new character
-  lcd.createChar(3, armsDown);  
-  // create a new character
-  lcd.createChar(4, armsUp);  
-
-  // set up the lcd's number of columns and rows: 
-  lcd.begin(16, 2);
-  // Print a message to the lcd.
-  lcd.print("I "); 
-  lcd.write(0);
-  lcd.print(" Arduino! ");
-  lcd.write(1);
-
-}
-
-void loop() {
-  // read the potentiometer on A0:
-  int sensorReading = analogRead(A0);
-  // map the result to 200 - 1000:
-  int delayTime = map(sensorReading, 0, 1023, 200, 1000);
-  // set the cursor to the bottom row, 5th position:
-  lcd.setCursor(4, 1);
-  // draw the little man, arms down:
-  lcd.write(3);
-  delay(delayTime);
-  lcd.setCursor(4, 1);
-  // draw him arms up:
-  lcd.write(4);
-  delay(delayTime); 
-}
-
-
-