1 files changed, 167 insertions, 0 deletions
diff --git a/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino b/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino
new file mode 100644
index 0000000..f28370e
--- /dev/null
+++ b/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino
@@ -0,0 +1,167 @@
+/*
+ Pachube client with Strings
+ 
+ This sketch connects two analog sensors to Pachube (http://www.pachube.com)
+ through a Telefonica GSM/GPRS shield.
+ 
+ This example has been updated to use version 2.0 of the Pachube.com API. 
+ To make it work, create a feed with two datastreams, and give them the IDs
+ sensor1 and sensor2. Or change the code below to match your feed.
+ 
+ This example uses the String library, which is part of the Arduino core from
+ version 0019.  
+ 
+ Circuit:
+ * Analog sensors attached to A0 and A1
+ * GSM shield attached to an Arduino
+ * SIM card with a data plan
+ 
+ created 8 March 2012
+ by Tom Igoe
+ and adapted for GSM shield by David Del Peral
+ 
+ This code is in the public domain.
+ 
+ */
+
+// Include the GSM library
+#include <GSM.h>
+
+// Pachube login information
+#define APIKEY         "YOUR API KEY GOES HERE"  // replace your pachube api key here
+#define FEEDID         00000                     // replace your feed ID
+#define USERAGENT      "My Project"              // user agent is the project name
+
+// PIN Number
+#define PINNUMBER ""
+
+// APN data
+#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
+#define GPRS_LOGIN     "login"    // replace with your GPRS login
+#define GPRS_PASSWORD  "password" // replace with your GPRS password
+
+// initialize the library instance
+GSMClient client;
+GPRS gprs;
+GSM gsmAccess;
+
+// if you don't want to use DNS (and reduce your sketch size)
+// use the numeric IP instead of the name for the server:
+// IPAddress server(216,52,233,121);     // numeric IP for api.pachube.com
+char server[] = "api.pachube.com";       // name address for Pachube API
+
+unsigned long lastConnectionTime = 0;           // last time you connected to the server, in milliseconds
+boolean lastConnected = false;                  // state of the connection last time through the main loop
+const unsigned long postingInterval = 10*1000;  // delay between updates to Pachube.com
+
+void setup()
+{
+  // initialize serial communications and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
+  }
+  
+  // connection state
+  boolean notConnected = true;
+  
+  // After starting the modem with GSM.begin()
+  // attach the shield to the GPRS network with the APN, login and password 
+  while(notConnected)
+  {
+    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
+        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
+      notConnected = false;
+    else
+    {
+      Serial.println("Not connected");
+      delay(1000);
+    }
+  }
+
+  Serial.println("Connected to GPRS network");
+}
+
+void loop()
+{
+  // read the sensor on A0
+  int sensorReading = analogRead(A0); 
+  
+  // convert the data to a String
+  String dataString = "sensor1,";
+  dataString += sensorReading;
+
+  // you can append multiple readings to this String to 
+  // send the pachube feed multiple values
+  int otherSensorReading = analogRead(A1);
+  dataString += "\nsensor2,";
+  dataString += otherSensorReading;
+
+  // if there's incoming data from the net connection.
+  // send it out the serial port.  This is for debugging
+  // purposes only
+  if (client.available())
+  {
+    char c = client.read();
+    Serial.print(c);
+  }
+
+  // if there's no net connection, but there was one last time
+  // through the loop, then stop the client
+  if (!client.connected() && lastConnected)
+  {
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+  }
+
+  // if you're not connected, and ten seconds have passed since
+  // your last connection, then connect again and send data
+  if(!client.connected() && (millis() - lastConnectionTime > postingInterval))
+  {
+    sendData(dataString);
+  }
+  // store the state of the connection for next time through
+  // the loop
+  lastConnected = client.connected();
+}
+
+// this method makes a HTTP connection to the server
+void sendData(String thisData)
+{
+  // if there's a successful connection:
+  if (client.connect(server, 80))
+  {
+    Serial.println("connecting...");
+    
+    // send the HTTP PUT request:
+    client.print("PUT /v2/feeds/");
+    client.print(FEEDID);
+    client.println(".csv HTTP/1.1");
+    client.print("Host: api.pachube.com\n");
+    client.print("X-ApiKey: ");
+    client.println(APIKEY);
+    client.print("User-Agent: ");
+    client.println(USERAGENT);
+    client.print("Content-Length: ");
+    client.println(thisData.length());
+
+    // last pieces of the HTTP PUT request
+    client.print("Content-Type: text/csv\n");
+    client.println("Connection: close\n");
+    client.println();
+    
+    // here's the actual content of the PUT request
+    client.println(thisData);
+  } 
+  else
+  {
+    // if you couldn't make a connection
+    Serial.println("connection failed");
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
+  }
+  // note the time that the connection was made or attempted:
+  lastConnectionTime = millis();
+}