diff options
Diffstat (limited to 'libraries/Firmata')
24 files changed, 5596 insertions, 0 deletions
diff --git a/libraries/Firmata/Boards.h b/libraries/Firmata/Boards.h new file mode 100644 index 0000000..f716320 --- /dev/null +++ b/libraries/Firmata/Boards.h @@ -0,0 +1,335 @@ +/* Boards.h - Hardware Abstraction Layer for Firmata library */ + +#ifndef Firmata_Boards_h +#define Firmata_Boards_h + +#include <Arduino.h> // for digitalRead, digitalWrite, etc + +// Normally Servo.h must be included before Firmata.h (which then includes +// this file). If Servo.h wasn't included, this allows the code to still +// compile, but without support for any Servos. Hopefully that's what the +// user intended by not including Servo.h +#ifndef MAX_SERVOS +#define MAX_SERVOS 0 +#endif + +/* + Firmata Hardware Abstraction Layer + +Firmata is built on top of the hardware abstraction functions of Arduino, +specifically digitalWrite, digitalRead, analogWrite, analogRead, and +pinMode. While these functions offer simple integer pin numbers, Firmata +needs more information than is provided by Arduino. This file provides +all other hardware specific details. To make Firmata support a new board, +only this file should require editing. + +The key concept is every "pin" implemented by Firmata may be mapped to +any pin as implemented by Arduino. Usually a simple 1-to-1 mapping is +best, but such mapping should not be assumed. This hardware abstraction +layer allows Firmata to implement any number of pins which map onto the +Arduino implemented pins in almost any arbitrary way. + + +General Constants: + +These constants provide basic information Firmata requires. + +TOTAL_PINS: The total number of pins Firmata implemented by Firmata. + Usually this will match the number of pins the Arduino functions + implement, including any pins pins capable of analog or digital. + However, Firmata may implement any number of pins. For example, + on Arduino Mini with 8 analog inputs, 6 of these may be used + for digital functions, and 2 are analog only. On such boards, + Firmata can implement more pins than Arduino's pinMode() + function, in order to accommodate those special pins. The + Firmata protocol supports a maximum of 128 pins, so this + constant must not exceed 128. + +TOTAL_ANALOG_PINS: The total number of analog input pins implemented. + The Firmata protocol allows up to 16 analog inputs, accessed + using offsets 0 to 15. Because Firmata presents the analog + inputs using different offsets than the actual pin numbers + (a legacy of Arduino's analogRead function, and the way the + analog input capable pins are physically labeled on all + Arduino boards), the total number of analog input signals + must be specified. 16 is the maximum. + +VERSION_BLINK_PIN: When Firmata starts up, it will blink the version + number. This constant is the Arduino pin number where a + LED is connected. + + +Pin Mapping Macros: + +These macros provide the mapping between pins as implemented by +Firmata protocol and the actual pin numbers used by the Arduino +functions. Even though such mappings are often simple, pin +numbers received by Firmata protocol should always be used as +input to these macros, and the result of the macro should be +used with with any Arduino function. + +When Firmata is extended to support a new pin mode or feature, +a pair of macros should be added and used for all hardware +access. For simple 1:1 mapping, these macros add no actual +overhead, yet their consistent use allows source code which +uses them consistently to be easily adapted to all other boards +with different requirements. + +IS_PIN_XXXX(pin): The IS_PIN macros resolve to true or non-zero + if a pin as implemented by Firmata corresponds to a pin + that actually implements the named feature. + +PIN_TO_XXXX(pin): The PIN_TO macros translate pin numbers as + implemented by Firmata to the pin numbers needed as inputs + to the Arduino functions. The corresponding IS_PIN macro + should always be tested before using a PIN_TO macro, so + these macros only need to handle valid Firmata pin + numbers for the named feature. + + +Port Access Inline Funtions: + +For efficiency, Firmata protocol provides access to digital +input and output pins grouped by 8 bit ports. When these +groups of 8 correspond to actual 8 bit ports as implemented +by the hardware, these inline functions can provide high +speed direct port access. Otherwise, a default implementation +using 8 calls to digitalWrite or digitalRead is used. + +When porting Firmata to a new board, it is recommended to +use the default functions first and focus only on the constants +and macros above. When those are working, if optimized port +access is desired, these inline functions may be extended. +The recommended approach defines a symbol indicating which +optimization to use, and then conditional complication is +used within these functions. + +readPort(port, bitmask): Read an 8 bit port, returning the value. + port: The port number, Firmata pins port*8 to port*8+7 + bitmask: The actual pins to read, indicated by 1 bits. + +writePort(port, value, bitmask): Write an 8 bit port. + port: The port number, Firmata pins port*8 to port*8+7 + value: The 8 bit value to write + bitmask: The actual pins to write, indicated by 1 bits. +*/ + +/*============================================================================== + * Board Specific Configuration + *============================================================================*/ + +// Arduino Duemilanove, Diecimila, and NG +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 24 // 14 digital + 2 unused + 8 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) (((p) >= 2 && (p) <= 13) || ((p) >= 16 && (p) <= 21)) +#define IS_PIN_ANALOG(p) ((p) >= 16 && (p) <= 23) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 2 && (p) <= 13 && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (((p) < 16) ? (p) : (p) - 2) +#define PIN_TO_ANALOG(p) ((p) - 16) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) +#define ARDUINO_PINOUT_OPTIMIZE 1 + + +// old Arduinos +#elif defined(__AVR_ATmega8__) +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 22 // 14 digital + 2 unused + 6 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) (((p) >= 2 && (p) <= 13) || ((p) >= 16 && (p) <= 21)) +#define IS_PIN_ANALOG(p) ((p) >= 16 && (p) <= 21) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 2 && (p) <= 13 && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (((p) < 16) ? (p) : (p) - 2) +#define PIN_TO_ANALOG(p) ((p) - 16) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) +#define ARDUINO_PINOUT_OPTIMIZE 1 + + +// Arduino Mega +#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define TOTAL_ANALOG_PINS 16 +#define TOTAL_PINS 70 // 54 digital + 16 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 54 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 2 && (p) - 2 < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 54) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// Wiring +#elif defined(__AVR_ATmega128__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 51 +#define VERSION_BLINK_PIN 48 +// TODO: hardware abstraction for wiring board + + +// Teensy 1.0 +#elif defined(__AVR_AT90USB162__) +#define TOTAL_ANALOG_PINS 0 +#define TOTAL_PINS 21 // 21 digital + no analog +#define VERSION_BLINK_PIN 6 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) (0) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) (0) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Teensy 2.0 +#elif defined(__AVR_ATmega32U4__) +#define TOTAL_ANALOG_PINS 12 +#define TOTAL_PINS 25 // 11 digital + 12 analog +#define VERSION_BLINK_PIN 11 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 11 && (p) <= 22) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) (((p)<22)?21-(p):11) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Teensy++ 1.0 and 2.0 +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 46 // 38 digital + 8 analog +#define VERSION_BLINK_PIN 6 +#define IS_PIN_DIGITAL(p) ((p) >= 0 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 38 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 38) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) (p) + + +// Sanguino +#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__) +#define TOTAL_ANALOG_PINS 8 +#define TOTAL_PINS 32 // 24 digital + 8 analog +#define VERSION_BLINK_PIN 0 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 24 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 24) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// Illuminato +#elif defined(__AVR_ATmega645__) +#define TOTAL_ANALOG_PINS 6 +#define TOTAL_PINS 42 // 36 digital + 6 analog +#define VERSION_BLINK_PIN 13 +#define IS_PIN_DIGITAL(p) ((p) >= 2 && (p) < TOTAL_PINS) +#define IS_PIN_ANALOG(p) ((p) >= 36 && (p) < TOTAL_PINS) +#define IS_PIN_PWM(p) IS_PIN_DIGITAL(p) +#define IS_PIN_SERVO(p) ((p) >= 0 && (p) < MAX_SERVOS) +#define IS_PIN_I2C(p) (0) +#define PIN_TO_DIGITAL(p) (p) +#define PIN_TO_ANALOG(p) ((p) - 36) +#define PIN_TO_PWM(p) PIN_TO_DIGITAL(p) +#define PIN_TO_SERVO(p) ((p) - 2) + + +// anything else +#else +#error "Please edit Boards.h with a hardware abstraction for this board" +#endif + + +/*============================================================================== + * readPort() - Read an 8 bit port + *============================================================================*/ + +static inline unsigned char readPort(byte, byte) __attribute__((always_inline, unused)); +static inline unsigned char readPort(byte port, byte bitmask) +{ +#if defined(ARDUINO_PINOUT_OPTIMIZE) + if (port == 0) return PIND & B11111100 & bitmask; // ignore Rx/Tx 0/1 + if (port == 1) return PINB & B00111111 & bitmask; // pins 8-13 (14,15 are disabled for the crystal) + if (port == 2) return PINC & bitmask; + return 0; +#else + unsigned char out=0, pin=port*8; + if (IS_PIN_DIGITAL(pin+0) && (bitmask & 0x01) && digitalRead(PIN_TO_DIGITAL(pin+0))) out |= 0x01; + if (IS_PIN_DIGITAL(pin+1) && (bitmask & 0x02) && digitalRead(PIN_TO_DIGITAL(pin+1))) out |= 0x02; + if (IS_PIN_DIGITAL(pin+2) && (bitmask & 0x04) && digitalRead(PIN_TO_DIGITAL(pin+2))) out |= 0x04; + if (IS_PIN_DIGITAL(pin+3) && (bitmask & 0x08) && digitalRead(PIN_TO_DIGITAL(pin+3))) out |= 0x08; + if (IS_PIN_DIGITAL(pin+4) && (bitmask & 0x10) && digitalRead(PIN_TO_DIGITAL(pin+4))) out |= 0x10; + if (IS_PIN_DIGITAL(pin+5) && (bitmask & 0x20) && digitalRead(PIN_TO_DIGITAL(pin+5))) out |= 0x20; + if (IS_PIN_DIGITAL(pin+6) && (bitmask & 0x40) && digitalRead(PIN_TO_DIGITAL(pin+6))) out |= 0x40; + if (IS_PIN_DIGITAL(pin+7) && (bitmask & 0x80) && digitalRead(PIN_TO_DIGITAL(pin+7))) out |= 0x80; + return out; +#endif +} + +/*============================================================================== + * writePort() - Write an 8 bit port, only touch pins specified by a bitmask + *============================================================================*/ + +static inline unsigned char writePort(byte, byte, byte) __attribute__((always_inline, unused)); +static inline unsigned char writePort(byte port, byte value, byte bitmask) +{ +#if defined(ARDUINO_PINOUT_OPTIMIZE) + if (port == 0) { + bitmask = bitmask & 0xFC; // Tx & Rx pins + cli(); + PORTD = (PORTD & ~bitmask) | (bitmask & value); + sei(); + } else if (port == 1) { + cli(); + PORTB = (PORTB & ~bitmask) | (bitmask & value); + sei(); + } else if (port == 2) { + cli(); + PORTC = (PORTC & ~bitmask) | (bitmask & value); + sei(); + } +#else + byte pin=port*8; + if ((bitmask & 0x01)) digitalWrite(PIN_TO_DIGITAL(pin+0), (value & 0x01)); + if ((bitmask & 0x02)) digitalWrite(PIN_TO_DIGITAL(pin+1), (value & 0x02)); + if ((bitmask & 0x04)) digitalWrite(PIN_TO_DIGITAL(pin+2), (value & 0x04)); + if ((bitmask & 0x08)) digitalWrite(PIN_TO_DIGITAL(pin+3), (value & 0x08)); + if ((bitmask & 0x10)) digitalWrite(PIN_TO_DIGITAL(pin+4), (value & 0x10)); + if ((bitmask & 0x20)) digitalWrite(PIN_TO_DIGITAL(pin+5), (value & 0x20)); + if ((bitmask & 0x40)) digitalWrite(PIN_TO_DIGITAL(pin+6), (value & 0x40)); + if ((bitmask & 0x80)) digitalWrite(PIN_TO_DIGITAL(pin+7), (value & 0x80)); +#endif +} + + + + +#ifndef TOTAL_PORTS +#define TOTAL_PORTS ((TOTAL_PINS + 7) / 8) +#endif + + +#endif /* Firmata_Boards_h */ + diff --git a/libraries/Firmata/Firmata.cpp b/libraries/Firmata/Firmata.cpp new file mode 100644 index 0000000..e30deae --- /dev/null +++ b/libraries/Firmata/Firmata.cpp @@ -0,0 +1,442 @@ +/* + Firmata.cpp - Firmata library + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. +*/ + +//****************************************************************************** +//* Includes +//****************************************************************************** + +#include "Arduino.h" +#include "HardwareSerial.h" +#include "Firmata.h" + +extern "C" { +#include <string.h> +#include <stdlib.h> +} + +//****************************************************************************** +//* Support Functions +//****************************************************************************** + +void sendValueAsTwo7bitBytes(int value) +{ + Serial.print(value & B01111111, BYTE); // LSB + Serial.print(value >> 7 & B01111111, BYTE); // MSB +} + +void startSysex(void) +{ + Serial.print(START_SYSEX, BYTE); +} + +void endSysex(void) +{ + Serial.print(END_SYSEX, BYTE); +} + +//****************************************************************************** +//* Constructors +//****************************************************************************** + +FirmataClass::FirmataClass(void) +{ + firmwareVersionCount = 0; + systemReset(); +} + +//****************************************************************************** +//* Public Methods +//****************************************************************************** + +/* begin method for overriding default serial bitrate */ +void FirmataClass::begin(void) +{ + begin(57600); +} + +/* begin method for overriding default serial bitrate */ +void FirmataClass::begin(long speed) +{ +#if defined(__AVR_ATmega128__) // Wiring + Serial.begin((uint32_t)speed); +#else + Serial.begin(speed); +#endif + blinkVersion(); + delay(300); + printVersion(); + printFirmwareVersion(); +} + +// output the protocol version message to the serial port +void FirmataClass::printVersion(void) { + Serial.print(REPORT_VERSION, BYTE); + Serial.print(FIRMATA_MAJOR_VERSION, BYTE); + Serial.print(FIRMATA_MINOR_VERSION, BYTE); +} + +void FirmataClass::blinkVersion(void) +{ + // flash the pin with the protocol version + pinMode(VERSION_BLINK_PIN,OUTPUT); + pin13strobe(FIRMATA_MAJOR_VERSION, 200, 400); + delay(300); + pin13strobe(2,1,4); // separator, a quick burst + delay(300); + pin13strobe(FIRMATA_MINOR_VERSION, 200, 400); +} + +void FirmataClass::printFirmwareVersion(void) +{ + byte i; + + if(firmwareVersionCount) { // make sure that the name has been set before reporting + startSysex(); + Serial.print(REPORT_FIRMWARE, BYTE); + Serial.print(firmwareVersionVector[0]); // major version number + Serial.print(firmwareVersionVector[1]); // minor version number + for(i=2; i<firmwareVersionCount; ++i) { + sendValueAsTwo7bitBytes(firmwareVersionVector[i]); + } + endSysex(); + } +} + +void FirmataClass::setFirmwareNameAndVersion(const char *name, byte major, byte minor) +{ + const char *filename; + char *extension; + + // parse out ".cpp" and "applet/" that comes from using __FILE__ + extension = strstr(name, ".cpp"); + filename = strrchr(name, '/') + 1; //points to slash, +1 gets to start of filename + // add two bytes for version numbers + if(extension && filename) { + firmwareVersionCount = extension - filename + 2; + } else { + firmwareVersionCount = strlen(name) + 2; + filename = name; + } + firmwareVersionVector = (byte *) malloc(firmwareVersionCount); + firmwareVersionVector[firmwareVersionCount] = 0; + firmwareVersionVector[0] = major; + firmwareVersionVector[1] = minor; + strncpy((char*)firmwareVersionVector + 2, filename, firmwareVersionCount - 2); + // alas, no snprintf on Arduino + // snprintf(firmwareVersionVector, MAX_DATA_BYTES, "%c%c%s", + // (char)major, (char)minor, firmwareVersionVector); +} + +//------------------------------------------------------------------------------ +// Serial Receive Handling + +int FirmataClass::available(void) +{ + return Serial.available(); +} + + +void FirmataClass::processSysexMessage(void) +{ + switch(storedInputData[0]) { //first byte in buffer is command + case REPORT_FIRMWARE: + printFirmwareVersion(); + break; + case STRING_DATA: + if(currentStringCallback) { + byte bufferLength = (sysexBytesRead - 1) / 2; + char *buffer = (char*)malloc(bufferLength * sizeof(char)); + byte i = 1; + byte j = 0; + while(j < bufferLength) { + buffer[j] = (char)storedInputData[i]; + i++; + buffer[j] += (char)(storedInputData[i] << 7); + i++; + j++; + } + (*currentStringCallback)(buffer); + } + break; + default: + if(currentSysexCallback) + (*currentSysexCallback)(storedInputData[0], sysexBytesRead - 1, storedInputData + 1); + } +} + +void FirmataClass::processInput(void) +{ + int inputData = Serial.read(); // this is 'int' to handle -1 when no data + int command; + + // TODO make sure it handles -1 properly + + if (parsingSysex) { + if(inputData == END_SYSEX) { + //stop sysex byte + parsingSysex = false; + //fire off handler function + processSysexMessage(); + } else { + //normal data byte - add to buffer + storedInputData[sysexBytesRead] = inputData; + sysexBytesRead++; + } + } else if( (waitForData > 0) && (inputData < 128) ) { + waitForData--; + storedInputData[waitForData] = inputData; + if( (waitForData==0) && executeMultiByteCommand ) { // got the whole message + switch(executeMultiByteCommand) { + case ANALOG_MESSAGE: + if(currentAnalogCallback) { + (*currentAnalogCallback)(multiByteChannel, + (storedInputData[0] << 7) + + storedInputData[1]); + } + break; + case DIGITAL_MESSAGE: + if(currentDigitalCallback) { + (*currentDigitalCallback)(multiByteChannel, + (storedInputData[0] << 7) + + storedInputData[1]); + } + break; + case SET_PIN_MODE: + if(currentPinModeCallback) + (*currentPinModeCallback)(storedInputData[1], storedInputData[0]); + break; + case REPORT_ANALOG: + if(currentReportAnalogCallback) + (*currentReportAnalogCallback)(multiByteChannel,storedInputData[0]); + break; + case REPORT_DIGITAL: + if(currentReportDigitalCallback) + (*currentReportDigitalCallback)(multiByteChannel,storedInputData[0]); + break; + } + executeMultiByteCommand = 0; + } + } else { + // remove channel info from command byte if less than 0xF0 + if(inputData < 0xF0) { + command = inputData & 0xF0; + multiByteChannel = inputData & 0x0F; + } else { + command = inputData; + // commands in the 0xF* range don't use channel data + } + switch (command) { + case ANALOG_MESSAGE: + case DIGITAL_MESSAGE: + case SET_PIN_MODE: + waitForData = 2; // two data bytes needed + executeMultiByteCommand = command; + break; + case REPORT_ANALOG: + case REPORT_DIGITAL: + waitForData = 1; // two data bytes needed + executeMultiByteCommand = command; + break; + case START_SYSEX: + parsingSysex = true; + sysexBytesRead = 0; + break; + case SYSTEM_RESET: + systemReset(); + break; + case REPORT_VERSION: + Firmata.printVersion(); + break; + } + } +} + +//------------------------------------------------------------------------------ +// Serial Send Handling + +// send an analog message +void FirmataClass::sendAnalog(byte pin, int value) +{ + // pin can only be 0-15, so chop higher bits + Serial.print(ANALOG_MESSAGE | (pin & 0xF), BYTE); + sendValueAsTwo7bitBytes(value); +} + +// send a single digital pin in a digital message +void FirmataClass::sendDigital(byte pin, int value) +{ + /* TODO add single pin digital messages to the protocol, this needs to + * track the last digital data sent so that it can be sure to change just + * one bit in the packet. This is complicated by the fact that the + * numbering of the pins will probably differ on Arduino, Wiring, and + * other boards. The DIGITAL_MESSAGE sends 14 bits at a time, but it is + * probably easier to send 8 bit ports for any board with more than 14 + * digital pins. + */ + + // TODO: the digital message should not be sent on the serial port every + // time sendDigital() is called. Instead, it should add it to an int + // which will be sent on a schedule. If a pin changes more than once + // before the digital message is sent on the serial port, it should send a + // digital message for each change. + + // if(value == 0) + // sendDigitalPortPair(); +} + + +// send 14-bits in a single digital message (protocol v1) +// send an 8-bit port in a single digital message (protocol v2) +void FirmataClass::sendDigitalPort(byte portNumber, int portData) +{ + Serial.print(DIGITAL_MESSAGE | (portNumber & 0xF),BYTE); + Serial.print((byte)portData % 128, BYTE); // Tx bits 0-6 + Serial.print(portData >> 7, BYTE); // Tx bits 7-13 +} + + +void FirmataClass::sendSysex(byte command, byte bytec, byte* bytev) +{ + byte i; + startSysex(); + Serial.print(command, BYTE); + for(i=0; i<bytec; i++) { + sendValueAsTwo7bitBytes(bytev[i]); + } + endSysex(); +} + +void FirmataClass::sendString(byte command, const char* string) +{ + sendSysex(command, strlen(string), (byte *)string); +} + + +// send a string as the protocol string type +void FirmataClass::sendString(const char* string) +{ + sendString(STRING_DATA, string); +} + + +// Internal Actions///////////////////////////////////////////////////////////// + +// generic callbacks +void FirmataClass::attach(byte command, callbackFunction newFunction) +{ + switch(command) { + case ANALOG_MESSAGE: currentAnalogCallback = newFunction; break; + case DIGITAL_MESSAGE: currentDigitalCallback = newFunction; break; + case REPORT_ANALOG: currentReportAnalogCallback = newFunction; break; + case REPORT_DIGITAL: currentReportDigitalCallback = newFunction; break; + case SET_PIN_MODE: currentPinModeCallback = newFunction; break; + } +} + +void FirmataClass::attach(byte command, systemResetCallbackFunction newFunction) +{ + switch(command) { + case SYSTEM_RESET: currentSystemResetCallback = newFunction; break; + } +} + +void FirmataClass::attach(byte command, stringCallbackFunction newFunction) +{ + switch(command) { + case STRING_DATA: currentStringCallback = newFunction; break; + } +} + +void FirmataClass::attach(byte command, sysexCallbackFunction newFunction) +{ + currentSysexCallback = newFunction; +} + +void FirmataClass::detach(byte command) +{ + switch(command) { + case SYSTEM_RESET: currentSystemResetCallback = NULL; break; + case STRING_DATA: currentStringCallback = NULL; break; + case START_SYSEX: currentSysexCallback = NULL; break; + default: + attach(command, (callbackFunction)NULL); + } +} + +// sysex callbacks +/* + * this is too complicated for analogReceive, but maybe for Sysex? + void FirmataClass::attachSysex(sysexFunction newFunction) + { + byte i; + byte tmpCount = analogReceiveFunctionCount; + analogReceiveFunction* tmpArray = analogReceiveFunctionArray; + analogReceiveFunctionCount++; + analogReceiveFunctionArray = (analogReceiveFunction*) calloc(analogReceiveFunctionCount, sizeof(analogReceiveFunction)); + for(i = 0; i < tmpCount; i++) { + analogReceiveFunctionArray[i] = tmpArray[i]; + } + analogReceiveFunctionArray[tmpCount] = newFunction; + free(tmpArray); + } +*/ + +//****************************************************************************** +//* Private Methods +//****************************************************************************** + + + +// resets the system state upon a SYSTEM_RESET message from the host software +void FirmataClass::systemReset(void) +{ + byte i; + + waitForData = 0; // this flag says the next serial input will be data + executeMultiByteCommand = 0; // execute this after getting multi-byte data + multiByteChannel = 0; // channel data for multiByteCommands + + + for(i=0; i<MAX_DATA_BYTES; i++) { + storedInputData[i] = 0; + } + + parsingSysex = false; + sysexBytesRead = 0; + + if(currentSystemResetCallback) + (*currentSystemResetCallback)(); + + //flush(); //TODO uncomment when Firmata is a subclass of HardwareSerial +} + + + +// ============================================================================= +// used for flashing the pin for the version number +void FirmataClass::pin13strobe(int count, int onInterval, int offInterval) +{ + byte i; + pinMode(VERSION_BLINK_PIN, OUTPUT); + for(i=0; i<count; i++) { + delay(offInterval); + digitalWrite(VERSION_BLINK_PIN, HIGH); + delay(onInterval); + digitalWrite(VERSION_BLINK_PIN, LOW); + } +} + + +// make one instance for the user to use +FirmataClass Firmata; + + diff --git a/libraries/Firmata/Firmata.h b/libraries/Firmata/Firmata.h new file mode 100644 index 0000000..86535d9 --- /dev/null +++ b/libraries/Firmata/Firmata.h @@ -0,0 +1,162 @@ +/* + Firmata.h - Firmata library + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. +*/ + +#ifndef Firmata_h +#define Firmata_h + +#include <Arduino.h> +#include <inttypes.h> + + +/* Version numbers for the protocol. The protocol is still changing, so these + * version numbers are important. This number can be queried so that host + * software can test whether it will be compatible with the currently + * installed firmware. */ +#define FIRMATA_MAJOR_VERSION 2 // for non-compatible changes +#define FIRMATA_MINOR_VERSION 2 // for backwards compatible changes + +#define MAX_DATA_BYTES 32 // max number of data bytes in non-Sysex messages + +// message command bytes (128-255/0x80-0xFF) +#define DIGITAL_MESSAGE 0x90 // send data for a digital pin +#define ANALOG_MESSAGE 0xE0 // send data for an analog pin (or PWM) +#define REPORT_ANALOG 0xC0 // enable analog input by pin # +#define REPORT_DIGITAL 0xD0 // enable digital input by port pair +// +#define SET_PIN_MODE 0xF4 // set a pin to INPUT/OUTPUT/PWM/etc +// +#define REPORT_VERSION 0xF9 // report protocol version +#define SYSTEM_RESET 0xFF // reset from MIDI +// +#define START_SYSEX 0xF0 // start a MIDI Sysex message +#define END_SYSEX 0xF7 // end a MIDI Sysex message + +// extended command set using sysex (0-127/0x00-0x7F) +/* 0x00-0x0F reserved for user-defined commands */ +#define SERVO_CONFIG 0x70 // set max angle, minPulse, maxPulse, freq +#define STRING_DATA 0x71 // a string message with 14-bits per char +#define SHIFT_DATA 0x75 // a bitstream to/from a shift register +#define I2C_REQUEST 0x76 // send an I2C read/write request +#define I2C_REPLY 0x77 // a reply to an I2C read request +#define I2C_CONFIG 0x78 // config I2C settings such as delay times and power pins +#define EXTENDED_ANALOG 0x6F // analog write (PWM, Servo, etc) to any pin +#define PIN_STATE_QUERY 0x6D // ask for a pin's current mode and value +#define PIN_STATE_RESPONSE 0x6E // reply with pin's current mode and value +#define CAPABILITY_QUERY 0x6B // ask for supported modes and resolution of all pins +#define CAPABILITY_RESPONSE 0x6C // reply with supported modes and resolution +#define ANALOG_MAPPING_QUERY 0x69 // ask for mapping of analog to pin numbers +#define ANALOG_MAPPING_RESPONSE 0x6A // reply with mapping info +#define REPORT_FIRMWARE 0x79 // report name and version of the firmware +#define SAMPLING_INTERVAL 0x7A // set the poll rate of the main loop +#define SYSEX_NON_REALTIME 0x7E // MIDI Reserved for non-realtime messages +#define SYSEX_REALTIME 0x7F // MIDI Reserved for realtime messages +// these are DEPRECATED to make the naming more consistent +#define FIRMATA_STRING 0x71 // same as STRING_DATA +#define SYSEX_I2C_REQUEST 0x76 // same as I2C_REQUEST +#define SYSEX_I2C_REPLY 0x77 // same as I2C_REPLY +#define SYSEX_SAMPLING_INTERVAL 0x7A // same as SAMPLING_INTERVAL + +// pin modes +//#define INPUT 0x00 // defined in Arduino.h +//#define OUTPUT 0x01 // defined in Arduino.h +#define ANALOG 0x02 // analog pin in analogInput mode +#define PWM 0x03 // digital pin in PWM output mode +#define SERVO 0x04 // digital pin in Servo output mode +#define SHIFT 0x05 // shiftIn/shiftOut mode +#define I2C 0x06 // pin included in I2C setup +#define TOTAL_PIN_MODES 7 + +extern "C" { +// callback function types + typedef void (*callbackFunction)(byte, int); + typedef void (*systemResetCallbackFunction)(void); + typedef void (*stringCallbackFunction)(char*); + typedef void (*sysexCallbackFunction)(byte command, byte argc, byte*argv); +} + + +// TODO make it a subclass of a generic Serial/Stream base class +class FirmataClass +{ +public: + FirmataClass(); +/* Arduino constructors */ + void begin(); + void begin(long); +/* querying functions */ + void printVersion(void); + void blinkVersion(void); + void printFirmwareVersion(void); + //void setFirmwareVersion(byte major, byte minor); // see macro below + void setFirmwareNameAndVersion(const char *name, byte major, byte minor); +/* serial receive handling */ + int available(void); + void processInput(void); +/* serial send handling */ + void sendAnalog(byte pin, int value); + void sendDigital(byte pin, int value); // TODO implement this + void sendDigitalPort(byte portNumber, int portData); + void sendString(const char* string); + void sendString(byte command, const char* string); + void sendSysex(byte command, byte bytec, byte* bytev); +/* attach & detach callback functions to messages */ + void attach(byte command, callbackFunction newFunction); + void attach(byte command, systemResetCallbackFunction newFunction); + void attach(byte command, stringCallbackFunction newFunction); + void attach(byte command, sysexCallbackFunction newFunction); + void detach(byte command); + +private: +/* firmware name and version */ + byte firmwareVersionCount; + byte *firmwareVersionVector; +/* input message handling */ + byte waitForData; // this flag says the next serial input will be data + byte executeMultiByteCommand; // execute this after getting multi-byte data + byte multiByteChannel; // channel data for multiByteCommands + byte storedInputData[MAX_DATA_BYTES]; // multi-byte data +/* sysex */ + boolean parsingSysex; + int sysexBytesRead; +/* callback functions */ + callbackFunction currentAnalogCallback; + callbackFunction currentDigitalCallback; + callbackFunction currentReportAnalogCallback; + callbackFunction currentReportDigitalCallback; + callbackFunction currentPinModeCallback; + systemResetCallbackFunction currentSystemResetCallback; + stringCallbackFunction currentStringCallback; + sysexCallbackFunction currentSysexCallback; + +/* private methods ------------------------------ */ + void processSysexMessage(void); + void systemReset(void); + void pin13strobe(int count, int onInterval, int offInterval); +}; + +extern FirmataClass Firmata; + +/*============================================================================== + * MACROS + *============================================================================*/ + +/* shortcut for setFirmwareNameAndVersion() that uses __FILE__ to set the + * firmware name. It needs to be a macro so that __FILE__ is included in the + * firmware source file rather than the library source file. + */ +#define setFirmwareVersion(x, y) setFirmwareNameAndVersion(__FILE__, x, y) + +/* Hardware Abstraction Layer */ +#include "Boards.h" + +#endif /* Firmata_h */ + diff --git a/libraries/Firmata/LICENSE.txt b/libraries/Firmata/LICENSE.txt new file mode 100644 index 0000000..77cec6d --- /dev/null +++ b/libraries/Firmata/LICENSE.txt @@ -0,0 +1,458 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + diff --git a/libraries/Firmata/TODO.txt b/libraries/Firmata/TODO.txt new file mode 100644 index 0000000..86c9858 --- /dev/null +++ b/libraries/Firmata/TODO.txt @@ -0,0 +1,14 @@ + +- make Firmata a subclass of HardwareSerial + +- per-pin digital callback, since the per-port callback is a bit complicated + for beginners (maybe Firmata is not for beginners...) + +- simplify SimpleDigitalFirmata, take out the code that checks to see if the + data has changed, since it is a bit complicated for this example. Ideally + this example would be based on a call + +- turn current SimpleDigitalFirmata into DigitalPortFirmata for a more complex + example using the code which checks for changes before doing anything + +- test integration with Wiring diff --git a/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.pde b/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.pde new file mode 100644 index 0000000..5bca72a --- /dev/null +++ b/libraries/Firmata/examples/AllInputsFirmata/AllInputsFirmata.pde @@ -0,0 +1,79 @@ +/* + * This firmware reads all inputs and sends them as fast as it can. It was + * inspired by the ease-of-use of the Arduino2Max program. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte pin; + +int analogValue; +int previousAnalogValues[TOTAL_ANALOG_PINS]; + +byte portStatus[TOTAL_PORTS]; // each bit: 1=pin is digital input, 0=other/ignore +byte previousPINs[TOTAL_PORTS]; + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +/* make sure that the FTDI buffer doesn't go over 60 bytes, otherwise you + get long, random delays. So only read analogs every 20ms or so */ +int samplingInterval = 19; // how often to run the main loop (in ms) + +void sendPort(byte portNumber, byte portValue) +{ + portValue = portValue & portStatus[portNumber]; + if(previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + } +} + +void setup() +{ + byte i, port, status; + + Firmata.setFirmwareVersion(0, 1); + + for(pin = 0; pin < TOTAL_PINS; pin++) { + if IS_PIN_DIGITAL(pin) pinMode(PIN_TO_DIGITAL(pin), INPUT); + } + + for (port=0; port<TOTAL_PORTS; port++) { + status = 0; + for (i=0; i<8; i++) { + if (IS_PIN_DIGITAL(port * 8 + i)) status |= (1 << i); + } + portStatus[port] = status; + } + + Firmata.begin(57600); +} + +void loop() +{ + byte i; + + for (i=0; i<TOTAL_PORTS; i++) { + sendPort(i, readPort(i)); + } + /* make sure that the FTDI buffer doesn't go over 60 bytes, otherwise you + get long, random delays. So only read analogs every 20ms or so */ + currentMillis = millis(); + if(currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + while(Firmata.available()) { + Firmata.processInput(); + } + for(pin = 0; pin < TOTAL_ANALOG_PINS; pin++) { + analogValue = analogRead(pin); + if(analogValue != previousAnalogValues[pin]) { + Firmata.sendAnalog(pin, analogValue); + previousAnalogValues[pin] = analogValue; + } + } + } +} + + diff --git a/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.pde b/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.pde new file mode 100644 index 0000000..df8b674 --- /dev/null +++ b/libraries/Firmata/examples/AnalogFirmata/AnalogFirmata.pde @@ -0,0 +1,83 @@ +/* This firmware supports as many analog ports as possible, all analog inputs, + * four PWM outputs, and two with servo support. + * + * This example code is in the public domain. + */ +#include <Servo.h> +#include <Firmata.h> + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* servos */ +Servo servo9, servo10; // one instance per pin +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting +int analogPin = 0; // counter for reading analog pins +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis + + +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void analogWriteCallback(byte pin, int value) +{ + switch(pin) { + case 9: servo9.write(value); break; + case 10: servo10.write(value); break; + case 3: + case 5: + case 6: + case 11: // PWM pins + analogWrite(pin, value); + break; + } +} +// ----------------------------------------------------------------------------- +// sets bits in a bit array (int) to toggle the reporting of the analogIns +void reportAnalogCallback(byte pin, int value) +{ + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << pin); + } + else { // everything but 0 enables reporting of that pin + analogInputsToReport = analogInputsToReport | (1 << pin); + } + // TODO: save status to EEPROM here, if changed +} + +/*============================================================================== + * SETUP() + *============================================================================*/ +void setup() +{ + Firmata.setFirmwareVersion(0, 2); + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + + servo9.attach(9); + servo10.attach(10); + Firmata.begin(57600); +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ + while(Firmata.available()) + Firmata.processInput(); + currentMillis = millis(); + if(currentMillis - previousMillis > 20) { + previousMillis += 20; // run this every 20ms + for(analogPin=0;analogPin<TOTAL_ANALOG_PINS;analogPin++) { + if( analogInputsToReport & (1 << analogPin) ) + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } +} + diff --git a/libraries/Firmata/examples/AnalogFirmata/Makefile b/libraries/Firmata/examples/AnalogFirmata/Makefile new file mode 100644 index 0000000..e968c0a --- /dev/null +++ b/libraries/Firmata/examples/AnalogFirmata/Makefile @@ -0,0 +1,263 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include <WProgram.h> +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ + +PORT = /dev/tty.usbserial-* +TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') +ARDUINO = /Applications/arduino +ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino +ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries +INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ + -I$(ARDUINO_LIB_SRC)/EEPROM \ + -I$(ARDUINO_LIB_SRC)/Firmata \ + -I$(ARDUINO_LIB_SRC)/Servo \ + -I$(ARDUINO_LIB_SRC) +SRC = $(wildcard $(ARDUINO_SRC)/*.c) +CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ + $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ + $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ + $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ + $(ARDUINO_SRC)/WMath.cpp +HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) + +MCU = atmega168 +#MCU = atmega8 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) -q -V + +# Program settings +CC = avr-gcc +CXX = avr-g++ +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: applet/$(TARGET).hex + +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +extcoff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym .pde + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +# Compile: create object files from C++ source files. +.cpp.o: $(HEADERS) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: $(HEADERS) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +applet/$(TARGET).cpp: $(TARGET).pde + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp + sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ + grep -v 'loop()' >> applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp + +# Link: create ELF output file from object files. +applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) + $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) + +pd_close_serial: + echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + +pd_test: build pd_close_serial upload + +# Target: clean project. +clean: + $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ + applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ + applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + rmdir -- applet + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test + +# for emacs +etags: + make etags_`uname -s` + etags *.pde \ + $(ARDUINO_SRC)/*.[ch] \ + $(ARDUINO_SRC)/*.cpp \ + $(ARDUINO_LIB_SRC)/*/*.[ch] \ + $(ARDUINO_LIB_SRC)/*/*.cpp \ + $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ + $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] + +etags_Darwin: +# etags -a + +etags_Linux: +# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h + +etags_MINGW: +# etags -a /usr/include/*.h /usr/include/sys/*.h + + + diff --git a/libraries/Firmata/examples/EchoString/EchoString.pde b/libraries/Firmata/examples/EchoString/EchoString.pde new file mode 100644 index 0000000..e5c4e6f --- /dev/null +++ b/libraries/Firmata/examples/EchoString/EchoString.pde @@ -0,0 +1,40 @@ +/* This sketch accepts strings and raw sysex messages and echos them back. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte analogPin; + +void stringCallback(char *myString) +{ + Firmata.sendString(myString); +} + + +void sysexCallback(byte command, byte argc, byte*argv) +{ + Serial.write(START_SYSEX); + Serial.write(command); + for(byte i=0; i<argc; i++) { + Serial.write(argv[i]); + } + Serial.write(END_SYSEX); +} + +void setup() +{ + Firmata.setFirmwareVersion(0, 1); + Firmata.attach(STRING_DATA, stringCallback); + Firmata.attach(START_SYSEX, sysexCallback); + Firmata.begin(57600); +} + +void loop() +{ + while(Firmata.available()) { + Firmata.processInput(); + } +} + + diff --git a/libraries/Firmata/examples/EchoString/Makefile b/libraries/Firmata/examples/EchoString/Makefile new file mode 100644 index 0000000..e968c0a --- /dev/null +++ b/libraries/Firmata/examples/EchoString/Makefile @@ -0,0 +1,263 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include <WProgram.h> +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ + +PORT = /dev/tty.usbserial-* +TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') +ARDUINO = /Applications/arduino +ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino +ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries +INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ + -I$(ARDUINO_LIB_SRC)/EEPROM \ + -I$(ARDUINO_LIB_SRC)/Firmata \ + -I$(ARDUINO_LIB_SRC)/Servo \ + -I$(ARDUINO_LIB_SRC) +SRC = $(wildcard $(ARDUINO_SRC)/*.c) +CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ + $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ + $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ + $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ + $(ARDUINO_SRC)/WMath.cpp +HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) + +MCU = atmega168 +#MCU = atmega8 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) -q -V + +# Program settings +CC = avr-gcc +CXX = avr-g++ +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: applet/$(TARGET).hex + +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +extcoff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym .pde + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +# Compile: create object files from C++ source files. +.cpp.o: $(HEADERS) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: $(HEADERS) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +applet/$(TARGET).cpp: $(TARGET).pde + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp + sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ + grep -v 'loop()' >> applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp + +# Link: create ELF output file from object files. +applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) + $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) + +pd_close_serial: + echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + +pd_test: build pd_close_serial upload + +# Target: clean project. +clean: + $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ + applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ + applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + rmdir -- applet + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test + +# for emacs +etags: + make etags_`uname -s` + etags *.pde \ + $(ARDUINO_SRC)/*.[ch] \ + $(ARDUINO_SRC)/*.cpp \ + $(ARDUINO_LIB_SRC)/*/*.[ch] \ + $(ARDUINO_LIB_SRC)/*/*.cpp \ + $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ + $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] + +etags_Darwin: +# etags -a + +etags_Linux: +# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h + +etags_MINGW: +# etags -a /usr/include/*.h /usr/include/sys/*.h + + + diff --git a/libraries/Firmata/examples/I2CFirmata/I2CFirmata.pde b/libraries/Firmata/examples/I2CFirmata/I2CFirmata.pde new file mode 100644 index 0000000..11202e9 --- /dev/null +++ b/libraries/Firmata/examples/I2CFirmata/I2CFirmata.pde @@ -0,0 +1,217 @@ +/* + Copyright (C) 2009 Jeff Hoefs. All rights reserved. + Copyright (C) 2009 Shigeru Kobayashi. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + */ + +#include <Wire.h> +#include <Firmata.h> + + +#define I2C_WRITE B00000000 +#define I2C_READ B00001000 +#define I2C_READ_CONTINUOUSLY B00010000 +#define I2C_STOP_READING B00011000 +#define I2C_READ_WRITE_MODE_MASK B00011000 + +#define MAX_QUERIES 8 + +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +unsigned int samplingInterval = 32; // default sampling interval is 33ms +unsigned int i2cReadDelayTime = 0; // default delay time between i2c read request and Wire.requestFrom() +unsigned int powerPinsEnabled = 0; // use as boolean to prevent enablePowerPins from being called more than once + +#define MINIMUM_SAMPLING_INTERVAL 10 + +#define REGISTER_NOT_SPECIFIED -1 + +struct i2c_device_info { + byte addr; + byte reg; + byte bytes; +}; + +i2c_device_info query[MAX_QUERIES]; + +byte i2cRxData[32]; +boolean readingContinuously = false; +byte queryIndex = 0; + +void readAndReportData(byte address, int theRegister, byte numBytes) +{ + if (theRegister != REGISTER_NOT_SPECIFIED) { + Wire.beginTransmission(address); + Wire.send((byte)theRegister); + Wire.endTransmission(); + delayMicroseconds(i2cReadDelayTime); // delay is necessary for some devices such as WiiNunchuck + } + else { + theRegister = 0; // fill the register with a dummy value + } + + Wire.requestFrom(address, numBytes); + + // check to be sure correct number of bytes were returned by slave + if(numBytes == Wire.available()) { + i2cRxData[0] = address; + i2cRxData[1] = theRegister; + for (int i = 0; i < numBytes; i++) { + i2cRxData[2 + i] = Wire.receive(); + } + // send slave address, register and received bytes + Firmata.sendSysex(I2C_REPLY, numBytes + 2, i2cRxData); + } + else { + if(numBytes > Wire.available()) { + Firmata.sendString("I2C Read Error: Too many bytes received"); + } else { + Firmata.sendString("I2C Read Error: Too few bytes received"); + } + } + +} + +void sysexCallback(byte command, byte argc, byte *argv) +{ + byte mode; + byte slaveAddress; + byte slaveRegister; + byte data; + int delayTime; + + if (command == I2C_REQUEST) { + mode = argv[1] & I2C_READ_WRITE_MODE_MASK; + slaveAddress = argv[0]; + + switch(mode) { + case I2C_WRITE: + Wire.beginTransmission(slaveAddress); + for (byte i = 2; i < argc; i += 2) { + data = argv[i] + (argv[i + 1] << 7); + Wire.send(data); + } + Wire.endTransmission(); + delayMicroseconds(70); // TODO is this needed? + break; + case I2C_READ: + if (argc == 6) { + // a slave register is specified + slaveRegister = argv[2] + (argv[3] << 7); + data = argv[4] + (argv[5] << 7); // bytes to read + readAndReportData(slaveAddress, (int)slaveRegister, data); + } + else { + // a slave register is NOT specified + data = argv[2] + (argv[3] << 7); // bytes to read + readAndReportData(slaveAddress, (int)REGISTER_NOT_SPECIFIED, data); + } + break; + case I2C_READ_CONTINUOUSLY: + if ((queryIndex + 1) >= MAX_QUERIES) { + // too many queries, just ignore + Firmata.sendString("too many queries"); + break; + } + query[queryIndex].addr = slaveAddress; + query[queryIndex].reg = argv[2] + (argv[3] << 7); + query[queryIndex].bytes = argv[4] + (argv[5] << 7); + readingContinuously = true; + queryIndex++; + break; + case I2C_STOP_READING: + readingContinuously = false; + queryIndex = 0; + break; + default: + break; + } + } + else if (command == SAMPLING_INTERVAL) { + samplingInterval = argv[0] + (argv[1] << 7); + + if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) { + samplingInterval = MINIMUM_SAMPLING_INTERVAL; + } + + samplingInterval -= 1; + Firmata.sendString("sampling interval"); + } + + else if (command == I2C_CONFIG) { + delayTime = (argv[4] + (argv[5] << 7)); // MSB + delayTime = (delayTime << 8) + (argv[2] + (argv[3] << 7)); // add LSB + + if((argv[0] + (argv[1] << 7)) > 0) { + enablePowerPins(PORTC3, PORTC2); + } + + if(delayTime > 0) { + i2cReadDelayTime = delayTime; + } + + if(argc > 6) { + // If you extend I2C_Config, handle your data here + } + + } +} + +void systemResetCallback() +{ + readingContinuously = false; + queryIndex = 0; +} + +/* reference: BlinkM_funcs.h by Tod E. Kurt, ThingM, http://thingm.com/ */ +// Enables Pins A2 and A3 to be used as GND and Power +// so that I2C devices can be plugged directly +// into Arduino header (pins A2 - A5) +static void enablePowerPins(byte pwrpin, byte gndpin) +{ + if(powerPinsEnabled == 0) { + DDRC |= _BV(pwrpin) | _BV(gndpin); + PORTC &=~ _BV(gndpin); + PORTC |= _BV(pwrpin); + powerPinsEnabled = 1; + Firmata.sendString("Power pins enabled"); + delay(100); + } +} + +void setup() +{ + Firmata.setFirmwareVersion(2, 0); + + Firmata.attach(START_SYSEX, sysexCallback); + Firmata.attach(SYSTEM_RESET, systemResetCallback); + + for (int i = 0; i < TOTAL_PINS; ++i) { + pinMode(i, OUTPUT); + } + + Firmata.begin(57600); + Wire.begin(); +} + +void loop() +{ + while (Firmata.available()) { + Firmata.processInput(); + } + + currentMillis = millis(); + if (currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + + for (byte i = 0; i < queryIndex; i++) { + readAndReportData(query[i].addr, query[i].reg, query[i].bytes); + } + } +} diff --git a/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt b/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt new file mode 100644 index 0000000..77cec6d --- /dev/null +++ b/libraries/Firmata/examples/OldStandardFirmata/LICENSE.txt @@ -0,0 +1,458 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + diff --git a/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.pde b/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.pde new file mode 100644 index 0000000..56a47ac --- /dev/null +++ b/libraries/Firmata/examples/OldStandardFirmata/OldStandardFirmata.pde @@ -0,0 +1,228 @@ +/* + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + */ + +/* + * This is an old version of StandardFirmata (v2.0). It is kept here because + * its the last version that works on an ATMEGA8 chip. Also, it can be used + * for host software that has not been updated to a newer version of the + * protocol. It also uses the old baud rate of 115200 rather than 57600. + */ + +#include <EEPROM.h> +#include <Firmata.h> + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting +int analogPin = 0; // counter for reading analog pins + +/* digital pins */ +byte reportPINs[TOTAL_PORTS]; // PIN == input port +byte previousPINs[TOTAL_PORTS]; // PIN == input port +byte pinStatus[TOTAL_PINS]; // store pin status, default OUTPUT +byte portStatus[TOTAL_PORTS]; + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis + + +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void outputPort(byte portNumber, byte portValue) +{ + portValue = portValue &~ portStatus[portNumber]; + if(previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + Firmata.sendDigitalPort(portNumber, portValue); + } +} + +/* ----------------------------------------------------------------------------- + * check all the active digital inputs for change of state, then add any events + * to the Serial output queue using Serial.print() */ +void checkDigitalInputs(void) +{ + byte i, tmp; + for(i=0; i < TOTAL_PORTS; i++) { + if(reportPINs[i]) { + switch(i) { + case 0: outputPort(0, PIND &~ B00000011); break; // ignore Rx/Tx 0/1 + case 1: outputPort(1, PINB); break; + case 2: outputPort(2, PINC); break; + } + } + } +} + +// ----------------------------------------------------------------------------- +/* sets the pin mode to the correct state and sets the relevant bits in the + * two bit-arrays that track Digital I/O and PWM status + */ +void setPinModeCallback(byte pin, int mode) { + byte port = 0; + byte offset = 0; + + if (pin < 8) { + port = 0; + offset = 0; + } else if (pin < 14) { + port = 1; + offset = 8; + } else if (pin < 22) { + port = 2; + offset = 14; + } + + if(pin > 1) { // ignore RxTx (pins 0 and 1) + pinStatus[pin] = mode; + switch(mode) { + case INPUT: + pinMode(pin, INPUT); + portStatus[port] = portStatus[port] &~ (1 << (pin - offset)); + break; + case OUTPUT: + digitalWrite(pin, LOW); // disable PWM + case PWM: + pinMode(pin, OUTPUT); + portStatus[port] = portStatus[port] | (1 << (pin - offset)); + break; + //case ANALOG: // TODO figure this out + default: + Firmata.sendString(""); + } + // TODO: save status to EEPROM here, if changed + } +} + +void analogWriteCallback(byte pin, int value) +{ + setPinModeCallback(pin,PWM); + analogWrite(pin, value); +} + +void digitalWriteCallback(byte port, int value) +{ + switch(port) { + case 0: // pins 2-7 (don't change Rx/Tx, pins 0 and 1) + // 0xFF03 == B1111111100000011 0x03 == B00000011 + PORTD = (value &~ 0xFF03) | (PORTD & 0x03); + break; + case 1: // pins 8-13 (14,15 are disabled for the crystal) + PORTB = (byte)value; + break; + case 2: // analog pins used as digital + PORTC = (byte)value; + break; + } +} + +// ----------------------------------------------------------------------------- +/* sets bits in a bit array (int) to toggle the reporting of the analogIns + */ +//void FirmataClass::setAnalogPinReporting(byte pin, byte state) { +//} +void reportAnalogCallback(byte pin, int value) +{ + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << pin); + } + else { // everything but 0 enables reporting of that pin + analogInputsToReport = analogInputsToReport | (1 << pin); + } + // TODO: save status to EEPROM here, if changed +} + +void reportDigitalCallback(byte port, int value) +{ + reportPINs[port] = (byte)value; + if(port == 2) // turn off analog reporting when used as digital + analogInputsToReport = 0; +} + +/*============================================================================== + * SETUP() + *============================================================================*/ +void setup() +{ + byte i; + + Firmata.setFirmwareVersion(2, 0); + + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + Firmata.attach(REPORT_DIGITAL, reportDigitalCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + + portStatus[0] = B00000011; // ignore Tx/RX pins + portStatus[1] = B11000000; // ignore 14/15 pins + portStatus[2] = B00000000; + +// for(i=0; i<TOTAL_PINS; ++i) { // TODO make this work with analogs + for(i=0; i<14; ++i) { + setPinModeCallback(i,OUTPUT); + } + // set all outputs to 0 to make sure internal pull-up resistors are off + PORTB = 0; // pins 8-15 + PORTC = 0; // analog port + PORTD = 0; // pins 0-7 + + // TODO rethink the init, perhaps it should report analog on default + for(i=0; i<TOTAL_PORTS; ++i) { + reportPINs[i] = false; + } + // TODO: load state from EEPROM here + + /* send digital inputs here, if enabled, to set the initial state on the + * host computer, since once in the loop(), this firmware will only send + * digital data on change. */ + if(reportPINs[0]) outputPort(0, PIND &~ B00000011); // ignore Rx/Tx 0/1 + if(reportPINs[1]) outputPort(1, PINB); + if(reportPINs[2]) outputPort(2, PINC); + + Firmata.begin(115200); +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ +/* DIGITALREAD - as fast as possible, check for changes and output them to the + * FTDI buffer using Serial.print() */ + checkDigitalInputs(); + currentMillis = millis(); + if(currentMillis - previousMillis > 20) { + previousMillis += 20; // run this every 20ms + /* SERIALREAD - Serial.read() uses a 128 byte circular buffer, so handle + * all serialReads at once, i.e. empty the buffer */ + while(Firmata.available()) + Firmata.processInput(); + /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over + * 60 bytes. use a timer to sending an event character every 4 ms to + * trigger the buffer to dump. */ + + /* ANALOGREAD - right after the event character, do all of the + * analogReads(). These only need to be done every 4ms. */ + for(analogPin=0;analogPin<TOTAL_ANALOG_PINS;analogPin++) { + if( analogInputsToReport & (1 << analogPin) ) { + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } + } +} diff --git a/libraries/Firmata/examples/ServoFirmata/Makefile b/libraries/Firmata/examples/ServoFirmata/Makefile new file mode 100644 index 0000000..e968c0a --- /dev/null +++ b/libraries/Firmata/examples/ServoFirmata/Makefile @@ -0,0 +1,263 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include <WProgram.h> +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ + +PORT = /dev/tty.usbserial-* +TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') +ARDUINO = /Applications/arduino +ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino +ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries +INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ + -I$(ARDUINO_LIB_SRC)/EEPROM \ + -I$(ARDUINO_LIB_SRC)/Firmata \ + -I$(ARDUINO_LIB_SRC)/Servo \ + -I$(ARDUINO_LIB_SRC) +SRC = $(wildcard $(ARDUINO_SRC)/*.c) +CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ + $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ + $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ + $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ + $(ARDUINO_SRC)/WMath.cpp +HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) + +MCU = atmega168 +#MCU = atmega8 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) -q -V + +# Program settings +CC = avr-gcc +CXX = avr-g++ +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: applet/$(TARGET).hex + +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +extcoff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym .pde + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +# Compile: create object files from C++ source files. +.cpp.o: $(HEADERS) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: $(HEADERS) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +applet/$(TARGET).cpp: $(TARGET).pde + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp + sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ + grep -v 'loop()' >> applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp + +# Link: create ELF output file from object files. +applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) + $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) + +pd_close_serial: + echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + +pd_test: build pd_close_serial upload + +# Target: clean project. +clean: + $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ + applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ + applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + rmdir -- applet + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test + +# for emacs +etags: + make etags_`uname -s` + etags *.pde \ + $(ARDUINO_SRC)/*.[ch] \ + $(ARDUINO_SRC)/*.cpp \ + $(ARDUINO_LIB_SRC)/*/*.[ch] \ + $(ARDUINO_LIB_SRC)/*/*.cpp \ + $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ + $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] + +etags_Darwin: +# etags -a + +etags_Linux: +# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h + +etags_MINGW: +# etags -a /usr/include/*.h /usr/include/sys/*.h + + + diff --git a/libraries/Firmata/examples/ServoFirmata/ServoFirmata.pde b/libraries/Firmata/examples/ServoFirmata/ServoFirmata.pde new file mode 100644 index 0000000..6f78ccd --- /dev/null +++ b/libraries/Firmata/examples/ServoFirmata/ServoFirmata.pde @@ -0,0 +1,42 @@ +/* This firmware supports as many servos as possible using the Servo library + * included in Arduino 0017 + * + * TODO add message to configure minPulse/maxPulse/degrees + * + * This example code is in the public domain. + */ + +#include <Servo.h> +#include <Firmata.h> + +Servo servos[MAX_SERVOS]; + +void analogWriteCallback(byte pin, int value) +{ + if (IS_PIN_SERVO(pin)) { + servos[PIN_TO_SERVO(pin)].write(value); + } +} + +void setup() +{ + byte pin; + + Firmata.setFirmwareVersion(0, 2); + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + + for (pin=0; pin < TOTAL_PINS; pin++) { + if (IS_PIN_SERVO(pin)) { + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin)); + } + } + + Firmata.begin(57600); +} + +void loop() +{ + while(Firmata.available()) + Firmata.processInput(); +} + diff --git a/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile b/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile new file mode 100644 index 0000000..e968c0a --- /dev/null +++ b/libraries/Firmata/examples/SimpleAnalogFirmata/Makefile @@ -0,0 +1,263 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include <WProgram.h> +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ + +PORT = /dev/tty.usbserial-* +TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') +ARDUINO = /Applications/arduino +ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino +ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries +INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ + -I$(ARDUINO_LIB_SRC)/EEPROM \ + -I$(ARDUINO_LIB_SRC)/Firmata \ + -I$(ARDUINO_LIB_SRC)/Servo \ + -I$(ARDUINO_LIB_SRC) +SRC = $(wildcard $(ARDUINO_SRC)/*.c) +CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ + $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ + $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ + $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ + $(ARDUINO_SRC)/WMath.cpp +HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) + +MCU = atmega168 +#MCU = atmega8 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) -q -V + +# Program settings +CC = avr-gcc +CXX = avr-g++ +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: applet/$(TARGET).hex + +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +extcoff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym .pde + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +# Compile: create object files from C++ source files. +.cpp.o: $(HEADERS) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: $(HEADERS) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +applet/$(TARGET).cpp: $(TARGET).pde + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp + sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ + grep -v 'loop()' >> applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp + +# Link: create ELF output file from object files. +applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) + $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) + +pd_close_serial: + echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + +pd_test: build pd_close_serial upload + +# Target: clean project. +clean: + $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ + applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ + applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + rmdir -- applet + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test + +# for emacs +etags: + make etags_`uname -s` + etags *.pde \ + $(ARDUINO_SRC)/*.[ch] \ + $(ARDUINO_SRC)/*.cpp \ + $(ARDUINO_LIB_SRC)/*/*.[ch] \ + $(ARDUINO_LIB_SRC)/*/*.cpp \ + $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ + $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] + +etags_Darwin: +# etags -a + +etags_Linux: +# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h + +etags_MINGW: +# etags -a /usr/include/*.h /usr/include/sys/*.h + + + diff --git a/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde b/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde new file mode 100644 index 0000000..b505b33 --- /dev/null +++ b/libraries/Firmata/examples/SimpleAnalogFirmata/SimpleAnalogFirmata.pde @@ -0,0 +1,35 @@ +/* Supports as many analog inputs and analog PWM outputs as possible. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte analogPin = 0; + +void analogWriteCallback(byte pin, int value) +{ + if (IS_PIN_PWM(pin)) { + pinMode(PIN_TO_DIGITAL(pin), OUTPUT); + analogWrite(PIN_TO_PWM(pin), value); + } +} + +void setup() +{ + Firmata.setFirmwareVersion(0, 1); + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.begin(57600); +} + +void loop() +{ + while(Firmata.available()) { + Firmata.processInput(); + } + // do one analogRead per loop, so if PC is sending a lot of + // analog write messages, we will only delay 1 analogRead + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + analogPin = analogPin + 1; + if (analogPin >= TOTAL_ANALOG_PINS) analogPin = 0; +} + diff --git a/libraries/Firmata/examples/SimpleDigitalFirmata/Makefile b/libraries/Firmata/examples/SimpleDigitalFirmata/Makefile new file mode 100644 index 0000000..e968c0a --- /dev/null +++ b/libraries/Firmata/examples/SimpleDigitalFirmata/Makefile @@ -0,0 +1,263 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include <WProgram.h> +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ + +PORT = /dev/tty.usbserial-* +TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') +ARDUINO = /Applications/arduino +ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino +ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries +INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ + -I$(ARDUINO_LIB_SRC)/EEPROM \ + -I$(ARDUINO_LIB_SRC)/Firmata \ + -I$(ARDUINO_LIB_SRC)/Servo \ + -I$(ARDUINO_LIB_SRC) +SRC = $(wildcard $(ARDUINO_SRC)/*.c) +CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ + $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ + $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ + $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ + $(ARDUINO_SRC)/WMath.cpp +HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) + +MCU = atmega168 +#MCU = atmega8 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) -q -V + +# Program settings +CC = avr-gcc +CXX = avr-g++ +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: applet/$(TARGET).hex + +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +extcoff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym .pde + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +# Compile: create object files from C++ source files. +.cpp.o: $(HEADERS) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: $(HEADERS) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +applet/$(TARGET).cpp: $(TARGET).pde + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp + sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ + grep -v 'loop()' >> applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp + +# Link: create ELF output file from object files. +applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) + $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) + +pd_close_serial: + echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + +pd_test: build pd_close_serial upload + +# Target: clean project. +clean: + $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ + applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ + applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + rmdir -- applet + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test + +# for emacs +etags: + make etags_`uname -s` + etags *.pde \ + $(ARDUINO_SRC)/*.[ch] \ + $(ARDUINO_SRC)/*.cpp \ + $(ARDUINO_LIB_SRC)/*/*.[ch] \ + $(ARDUINO_LIB_SRC)/*/*.cpp \ + $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ + $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] + +etags_Darwin: +# etags -a + +etags_Linux: +# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h + +etags_MINGW: +# etags -a /usr/include/*.h /usr/include/sys/*.h + + + diff --git a/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.pde b/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.pde new file mode 100644 index 0000000..64b566e --- /dev/null +++ b/libraries/Firmata/examples/SimpleDigitalFirmata/SimpleDigitalFirmata.pde @@ -0,0 +1,61 @@ +/* Supports as many digital inputs and outputs as possible. + * + * This example code is in the public domain. + */ +#include <Firmata.h> + +byte previousPIN[TOTAL_PORTS]; // PIN means PORT for input +byte previousPORT[TOTAL_PORTS]; + +void outputPort(byte portNumber, byte portValue) +{ + // only send the data when it changes, otherwise you get too many messages! + if (previousPIN[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPIN[portNumber] = portValue; + } +} + +void setPinModeCallback(byte pin, int mode) { + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), mode); + } +} + +void digitalWriteCallback(byte port, int value) +{ + byte i; + byte currentPinValue, previousPinValue; + + if (port < TOTAL_PORTS && value != previousPORT[port]) { + for(i=0; i<8; i++) { + currentPinValue = (byte) value & (1 << i); + previousPinValue = previousPORT[port] & (1 << i); + if(currentPinValue != previousPinValue) { + digitalWrite(i + (port*8), currentPinValue); + } + } + previousPORT[port] = value; + } +} + +void setup() +{ + Firmata.setFirmwareVersion(0, 1); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + Firmata.begin(57600); +} + +void loop() +{ + byte i; + + for (i=0; i<TOTAL_PORTS; i++) { + outputPort(i, readPort(i)); + } + + while(Firmata.available()) { + Firmata.processInput(); + } +} diff --git a/libraries/Firmata/examples/StandardFirmata/LICENSE.txt b/libraries/Firmata/examples/StandardFirmata/LICENSE.txt new file mode 100644 index 0000000..77cec6d --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata/LICENSE.txt @@ -0,0 +1,458 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + diff --git a/libraries/Firmata/examples/StandardFirmata/Makefile b/libraries/Firmata/examples/StandardFirmata/Makefile new file mode 100644 index 0000000..835187a --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata/Makefile @@ -0,0 +1,273 @@ +# Arduino makefile +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# The Arduino environment does preliminary processing on a sketch before +# compiling it. If you're using this makefile instead, you'll need to do +# a few things differently: +# +# - Give your program's file a .cpp extension (e.g. foo.cpp). +# +# - Put this line at top of your code: #include <WProgram.h> +# +# - Write prototypes for all your functions (or define them before you +# call them). A prototype declares the types of parameters a +# function will take and what type of value it will return. This +# means that you can have a call to a function before the definition +# of the function. A function prototype looks like the first line of +# the function, with a semi-colon at the end. For example: +# int digitalRead(int pin); +# +# Instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. +# +# 2. Below, modify the line containing "TARGET" to refer to the name of +# of your program's file without an extension (e.g. TARGET = foo). +# +# 3. Modify the line containg "ARDUINO" to point the directory that +# contains the Arduino core (for normal Arduino installations, this +# is the hardware/cores/arduino sub-directory). +# +# 4. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id: Makefile,v 1.7 2007/04/13 05:28:23 eighthave Exp $ + +PORT = /dev/tty.usbserial-* +TARGET := $(shell pwd | sed 's|.*/\(.*\)|\1|') +ARDUINO = /Applications/arduino +ARDUINO_SRC = $(ARDUINO)/hardware/cores/arduino +ARDUINO_LIB_SRC = $(ARDUINO)/hardware/libraries +ARDUINO_TOOLS = $(ARDUINO)/hardware/tools +INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/hardware/tools/avr/avr/include \ + -I$(ARDUINO_LIB_SRC)/EEPROM \ + -I$(ARDUINO_LIB_SRC)/Firmata \ + -I$(ARDUINO_LIB_SRC)/Matrix \ + -I$(ARDUINO_LIB_SRC)/Servo \ + -I$(ARDUINO_LIB_SRC)/Wire \ + -I$(ARDUINO_LIB_SRC) +SRC = $(wildcard $(ARDUINO_SRC)/*.c) +CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ + $(ARDUINO_LIB_SRC)/EEPROM/EEPROM.cpp \ + $(ARDUINO_LIB_SRC)/Firmata/Firmata.cpp \ + $(ARDUINO_LIB_SRC)/Servo/Servo.cpp \ + $(ARDUINO_SRC)/Print.cpp \ + $(ARDUINO_SRC)/WMath.cpp +HEADERS = $(wildcard $(ARDUINO_SRC)/*.h) $(wildcard $(ARDUINO_LIB_SRC)/*/*.h) + +MCU = atmega168 +#MCU = atmega8 +F_CPU = 16000000 +FORMAT = ihex +UPLOAD_RATE = 19200 + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PROGRAMMER = stk500 +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) -q -V + +# Program settings +ARDUINO_AVR_BIN = $(ARDUINO_TOOLS)/avr/bin +CC = $(ARDUINO_AVR_BIN)/avr-gcc +CXX = $(ARDUINO_AVR_BIN)/avr-g++ +OBJCOPY = $(ARDUINO_AVR_BIN)/avr-objcopy +OBJDUMP = $(ARDUINO_AVR_BIN)/avr-objdump +SIZE = $(ARDUINO_AVR_BIN)/avr-size +NM = $(ARDUINO_AVR_BIN)/avr-nm +#AVRDUDE = $(ARDUINO_AVR_BIN)/avrdude +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: build + +build: applet/$(TARGET).hex + +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +extcoff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym .pde + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + +# Compile: create object files from C++ source files. +.cpp.o: $(HEADERS) + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: $(HEADERS) + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +applet/$(TARGET).cpp: $(TARGET).pde + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp + sed -n 's|^\(void .*)\).*|\1;|p' $(TARGET).pde | grep -v 'setup()' | \ + grep -v 'loop()' >> applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO_SRC)/main.cxx >> applet/$(TARGET).cpp + +# Link: create ELF output file from object files. +applet/$(TARGET).elf: applet/$(TARGET).cpp $(OBJ) + $(CC) $(ALL_CFLAGS) $(OBJ) -lm --output $@ $(LDFLAGS) +# $(CC) $(ALL_CFLAGS) $(OBJ) $(ARDUINO_TOOLS)/avr/avr/lib/avr5/crtm168.o --output $@ $(LDFLAGS) + +pd_close_serial: + echo 'close;' | /Applications/Pd-extended.app/Contents/Resources/bin/pdsend 34567 || true + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + +pd_test: build pd_close_serial upload + +# Target: clean project. +clean: + $(REMOVE) -- applet/$(TARGET).hex applet/$(TARGET).eep \ + applet/$(TARGET).cof applet/$(TARGET).elf $(TARGET).map \ + applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + rmdir -- applet + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build eep lss sym coff extcoff clean depend pd_close_serial pd_test + +# for emacs +etags: + make etags_`uname -s` + etags *.pde \ + $(ARDUINO_SRC)/*.[ch] \ + $(ARDUINO_SRC)/*.cpp \ + $(ARDUINO_LIB_SRC)/*/*.[ch] \ + $(ARDUINO_LIB_SRC)/*/*.cpp \ + $(ARDUINO)/hardware/tools/avr/avr/include/avr/*.[ch] \ + $(ARDUINO)/hardware/tools/avr/avr/include/*.[ch] + +etags_Darwin: +# etags -a + +etags_Linux: +# etags -a /usr/include/*.h linux/input.h /usr/include/sys/*.h + +etags_MINGW: +# etags -a /usr/include/*.h /usr/include/sys/*.h + + +path: + echo $(PATH) + echo $$PATH + diff --git a/libraries/Firmata/examples/StandardFirmata/StandardFirmata.pde b/libraries/Firmata/examples/StandardFirmata/StandardFirmata.pde new file mode 100644 index 0000000..cd43366 --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata/StandardFirmata.pde @@ -0,0 +1,398 @@ +/* + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + + formatted using the GNU C formatting and indenting +*/ + +/* + * TODO: use Program Control to load stored profiles from EEPROM + */ + +#include <Servo.h> +#include <Firmata.h> + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting + +/* digital input ports */ +byte reportPINs[TOTAL_PORTS]; // 1 = report this port, 0 = silence +byte previousPINs[TOTAL_PORTS]; // previous 8 bits sent + +/* pins configuration */ +byte pinConfig[TOTAL_PINS]; // configuration of every pin +byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else +int pinState[TOTAL_PINS]; // any value that has been written + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +int samplingInterval = 19; // how often to run the main loop (in ms) + +Servo servos[MAX_SERVOS]; + +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void outputPort(byte portNumber, byte portValue, byte forceSend) +{ + // pins not configured as INPUT are cleared to zeros + portValue = portValue & portConfigInputs[portNumber]; + // only send if the value is different than previously sent + if(forceSend || previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + } +} + +/* ----------------------------------------------------------------------------- + * check all the active digital inputs for change of state, then add any events + * to the Serial output queue using Serial.print() */ +void checkDigitalInputs(void) +{ + /* Using non-looping code allows constants to be given to readPort(). + * The compiler will apply substantial optimizations if the inputs + * to readPort() are compile-time constants. */ + if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false); + if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false); + if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false); + if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false); + if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false); + if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false); + if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false); + if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false); + if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false); + if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false); + if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false); + if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false); + if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false); + if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false); + if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false); + if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false); +} + +// ----------------------------------------------------------------------------- +/* sets the pin mode to the correct state and sets the relevant bits in the + * two bit-arrays that track Digital I/O and PWM status + */ +void setPinModeCallback(byte pin, int mode) +{ + if (IS_PIN_SERVO(pin) && mode != SERVO && servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].detach(); + } + if (IS_PIN_ANALOG(pin)) { + reportAnalogCallback(PIN_TO_ANALOG(pin), mode == ANALOG ? 1 : 0); // turn on/off reporting + } + if (IS_PIN_DIGITAL(pin)) { + if (mode == INPUT) { + portConfigInputs[pin/8] |= (1 << (pin & 7)); + } else { + portConfigInputs[pin/8] &= ~(1 << (pin & 7)); + } + } + pinState[pin] = 0; + switch(mode) { + case ANALOG: + if (IS_PIN_ANALOG(pin)) { + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + } + pinConfig[pin] = ANALOG; + } + break; + case INPUT: + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + pinConfig[pin] = INPUT; + } + break; + case OUTPUT: + if (IS_PIN_DIGITAL(pin)) { + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable PWM + pinMode(PIN_TO_DIGITAL(pin), OUTPUT); + pinConfig[pin] = OUTPUT; + } + break; + case PWM: + if (IS_PIN_PWM(pin)) { + pinMode(PIN_TO_PWM(pin), OUTPUT); + analogWrite(PIN_TO_PWM(pin), 0); + pinConfig[pin] = PWM; + } + break; + case SERVO: + if (IS_PIN_SERVO(pin)) { + pinConfig[pin] = SERVO; + if (!servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin)); + } else { + Firmata.sendString("Servo only on pins from 2 to 13"); + } + } + break; + case I2C: + pinConfig[pin] = mode; + Firmata.sendString("I2C mode not yet supported"); + break; + default: + Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM + } + // TODO: save status to EEPROM here, if changed +} + +void analogWriteCallback(byte pin, int value) +{ + if (pin < TOTAL_PINS) { + switch(pinConfig[pin]) { + case SERVO: + if (IS_PIN_SERVO(pin)) + servos[PIN_TO_SERVO(pin)].write(value); + pinState[pin] = value; + break; + case PWM: + if (IS_PIN_PWM(pin)) + analogWrite(PIN_TO_PWM(pin), value); + pinState[pin] = value; + break; + } + } +} + +void digitalWriteCallback(byte port, int value) +{ + byte pin, lastPin, mask=1, pinWriteMask=0; + + if (port < TOTAL_PORTS) { + // create a mask of the pins on this port that are writable. + lastPin = port*8+8; + if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS; + for (pin=port*8; pin < lastPin; pin++) { + // do not disturb non-digital pins (eg, Rx & Tx) + if (IS_PIN_DIGITAL(pin)) { + // only write to OUTPUT and INPUT (enables pullup) + // do not touch pins in PWM, ANALOG, SERVO or other modes + if (pinConfig[pin] == OUTPUT || pinConfig[pin] == INPUT) { + pinWriteMask |= mask; + pinState[pin] = ((byte)value & mask) ? 1 : 0; + } + } + mask = mask << 1; + } + writePort(port, (byte)value, pinWriteMask); + } +} + + +// ----------------------------------------------------------------------------- +/* sets bits in a bit array (int) to toggle the reporting of the analogIns + */ +//void FirmataClass::setAnalogPinReporting(byte pin, byte state) { +//} +void reportAnalogCallback(byte analogPin, int value) +{ + if (analogPin < TOTAL_ANALOG_PINS) { + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << analogPin); + } else { + analogInputsToReport = analogInputsToReport | (1 << analogPin); + } + } + // TODO: save status to EEPROM here, if changed +} + +void reportDigitalCallback(byte port, int value) +{ + if (port < TOTAL_PORTS) { + reportPINs[port] = (byte)value; + } + // do not disable analog reporting on these 8 pins, to allow some + // pins used for digital, others analog. Instead, allow both types + // of reporting to be enabled, but check if the pin is configured + // as analog when sampling the analog inputs. Likewise, while + // scanning digital pins, portConfigInputs will mask off values from any + // pins configured as analog +} + +/*============================================================================== + * SYSEX-BASED commands + *============================================================================*/ + +void sysexCallback(byte command, byte argc, byte *argv) +{ + switch(command) { + case SERVO_CONFIG: + if(argc > 4) { + // these vars are here for clarity, they'll optimized away by the compiler + byte pin = argv[0]; + int minPulse = argv[1] + (argv[2] << 7); + int maxPulse = argv[3] + (argv[4] << 7); + + if (IS_PIN_SERVO(pin)) { + // servos are pins from 2 to 13, so offset for array + if (servos[PIN_TO_SERVO(pin)].attached()) + servos[PIN_TO_SERVO(pin)].detach(); + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse); + setPinModeCallback(pin, SERVO); + } + } + break; + case SAMPLING_INTERVAL: + if (argc > 1) + samplingInterval = argv[0] + (argv[1] << 7); + else + Firmata.sendString("Not enough data"); + break; + case EXTENDED_ANALOG: + if (argc > 1) { + int val = argv[1]; + if (argc > 2) val |= (argv[2] << 7); + if (argc > 3) val |= (argv[3] << 14); + analogWriteCallback(argv[0], val); + } + break; + case CAPABILITY_QUERY: + Serial.write(START_SYSEX); + Serial.write(CAPABILITY_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + if (IS_PIN_DIGITAL(pin)) { + Serial.write((byte)INPUT); + Serial.write(1); + Serial.write((byte)OUTPUT); + Serial.write(1); + } + if (IS_PIN_ANALOG(pin)) { + Serial.write(ANALOG); + Serial.write(10); + } + if (IS_PIN_PWM(pin)) { + Serial.write(PWM); + Serial.write(8); + } + if (IS_PIN_SERVO(pin)) { + Serial.write(SERVO); + Serial.write(14); + } + Serial.write(127); + } + Serial.write(END_SYSEX); + break; + case PIN_STATE_QUERY: + if (argc > 0) { + byte pin=argv[0]; + Serial.write(START_SYSEX); + Serial.write(PIN_STATE_RESPONSE); + Serial.write(pin); + if (pin < TOTAL_PINS) { + Serial.write((byte)pinConfig[pin]); + Serial.write((byte)pinState[pin] & 0x7F); + if (pinState[pin] & 0xFF80) Serial.write((byte)(pinState[pin] >> 7) & 0x7F); + if (pinState[pin] & 0xC000) Serial.write((byte)(pinState[pin] >> 14) & 0x7F); + } + Serial.write(END_SYSEX); + } + break; + case ANALOG_MAPPING_QUERY: + Serial.write(START_SYSEX); + Serial.write(ANALOG_MAPPING_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + Serial.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127); + } + Serial.write(END_SYSEX); + break; + } +} + + +/*============================================================================== + * SETUP() + *============================================================================*/ +void setup() +{ + byte i; + + Firmata.setFirmwareVersion(2, 2); + + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + Firmata.attach(REPORT_DIGITAL, reportDigitalCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + Firmata.attach(START_SYSEX, sysexCallback); + + // TODO: load state from EEPROM here + + /* these are initialized to zero by the compiler startup code + for (i=0; i < TOTAL_PORTS; i++) { + reportPINs[i] = false; + portConfigInputs[i] = 0; + previousPINs[i] = 0; + } + */ + for (i=0; i < TOTAL_PINS; i++) { + if (IS_PIN_ANALOG(i)) { + // turns off pullup, configures everything + setPinModeCallback(i, ANALOG); + } else { + // sets the output to 0, configures portConfigInputs + setPinModeCallback(i, OUTPUT); + } + } + // by defult, do not report any analog inputs + analogInputsToReport = 0; + + Firmata.begin(57600); + + /* send digital inputs to set the initial state on the host computer, + * since once in the loop(), this firmware will only send on change */ + for (i=0; i < TOTAL_PORTS; i++) { + outputPort(i, readPort(i, portConfigInputs[i]), true); + } +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ + byte pin, analogPin; + + /* DIGITALREAD - as fast as possible, check for changes and output them to the + * FTDI buffer using Serial.print() */ + checkDigitalInputs(); + + /* SERIALREAD - processing incoming messagse as soon as possible, while still + * checking digital inputs. */ + while(Firmata.available()) + Firmata.processInput(); + + /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over + * 60 bytes. use a timer to sending an event character every 4 ms to + * trigger the buffer to dump. */ + + currentMillis = millis(); + if (currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + /* ANALOGREAD - do all analogReads() at the configured sampling interval */ + for(pin=0; pin<TOTAL_PINS; pin++) { + if (IS_PIN_ANALOG(pin) && pinConfig[pin] == ANALOG) { + analogPin = PIN_TO_ANALOG(pin); + if (analogInputsToReport & (1 << analogPin)) { + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } + } + } +} diff --git a/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde b/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde new file mode 100644 index 0000000..4cfa658 --- /dev/null +++ b/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde @@ -0,0 +1,436 @@ +/* + This introduces modifications on the normal Firmata made for Arduino so that the LED + blinks until receiving the first command over serial. + + Copyright (C) 2010 David Cuartielles. All rights reserved. + + based at 99.9% on Firmata by HC Steiner according to the following license terms: + + Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. + + formatted using the GNU C formatting and indenting +*/ + +/* + * TODO: use Program Control to load stored profiles from EEPROM + */ + +#include <Servo.h> +#include <Firmata.h> + +/*============================================================================== + * GLOBAL VARIABLES + *============================================================================*/ + +/* has the command arrived? */ +boolean firstCommand = false; +int dataOnSerial = 0; +boolean statusLed = false; + +/* analog inputs */ +int analogInputsToReport = 0; // bitwise array to store pin reporting + +/* digital input ports */ +byte reportPINs[TOTAL_PORTS]; // 1 = report this port, 0 = silence +byte previousPINs[TOTAL_PORTS]; // previous 8 bits sent + +/* pins configuration */ +byte pinConfig[TOTAL_PINS]; // configuration of every pin +byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else +int pinState[TOTAL_PINS]; // any value that has been written + +/* timer variables */ +unsigned long currentMillis; // store the current value from millis() +unsigned long previousMillis; // for comparison with currentMillis +int samplingInterval = 19; // how often to run the main loop (in ms) +unsigned long toggleMillis; + +Servo servos[MAX_SERVOS]; + +/*============================================================================== + * FUNCTIONS + *============================================================================*/ + +void toggleLed() +{ + if (millis() - toggleMillis > 500) { + statusLed = !statusLed; + digitalWrite(13, statusLed); + toggleMillis = millis(); + } +} + +void outputPort(byte portNumber, byte portValue, byte forceSend) +{ + // pins not configured as INPUT are cleared to zeros + portValue = portValue & portConfigInputs[portNumber]; + // only send if the value is different than previously sent + if(forceSend || previousPINs[portNumber] != portValue) { + Firmata.sendDigitalPort(portNumber, portValue); + previousPINs[portNumber] = portValue; + } +} + +/* ----------------------------------------------------------------------------- + * check all the active digital inputs for change of state, then add any events + * to the Serial output queue using Serial.print() */ +void checkDigitalInputs(void) +{ + /* Using non-looping code allows constants to be given to readPort(). + * The compiler will apply substantial optimizations if the inputs + * to readPort() are compile-time constants. */ + if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false); + if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false); + if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false); + if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false); + if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false); + if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false); + if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false); + if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false); + if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false); + if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false); + if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false); + if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false); + if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false); + if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false); + if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false); + if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false); +} + +// ----------------------------------------------------------------------------- +/* sets the pin mode to the correct state and sets the relevant bits in the + * two bit-arrays that track Digital I/O and PWM status + */ +void setPinModeCallback(byte pin, int mode) +{ + if (IS_PIN_SERVO(pin) && mode != SERVO && servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].detach(); + } + if (IS_PIN_ANALOG(pin)) { + reportAnalogCallback(PIN_TO_ANALOG(pin), mode == ANALOG ? 1 : 0); // turn on/off reporting + } + if (IS_PIN_DIGITAL(pin)) { + if (mode == INPUT) { + portConfigInputs[pin/8] |= (1 << (pin & 7)); + } else { + portConfigInputs[pin/8] &= ~(1 << (pin & 7)); + } + } + pinState[pin] = 0; + switch(mode) { + case ANALOG: + if (IS_PIN_ANALOG(pin)) { + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + } + pinConfig[pin] = ANALOG; + } + break; + case INPUT: + if (IS_PIN_DIGITAL(pin)) { + pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups + pinConfig[pin] = INPUT; + } + break; + case OUTPUT: + if (IS_PIN_DIGITAL(pin)) { + digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable PWM + pinMode(PIN_TO_DIGITAL(pin), OUTPUT); + pinConfig[pin] = OUTPUT; + } + break; + case PWM: + if (IS_PIN_PWM(pin)) { + pinMode(PIN_TO_PWM(pin), OUTPUT); + analogWrite(PIN_TO_PWM(pin), 0); + pinConfig[pin] = PWM; + } + break; + case SERVO: + if (IS_PIN_SERVO(pin)) { + pinConfig[pin] = SERVO; + if (!servos[PIN_TO_SERVO(pin)].attached()) { + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin)); + } else { + Firmata.sendString("Servo only on pins from 2 to 13"); + } + } + break; + case I2C: + pinConfig[pin] = mode; + Firmata.sendString("I2C mode not yet supported"); + break; + default: + Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM + } + // TODO: save status to EEPROM here, if changed +} + +void analogWriteCallback(byte pin, int value) +{ + if (pin < TOTAL_PINS) { + switch(pinConfig[pin]) { + case SERVO: + if (IS_PIN_SERVO(pin)) + servos[PIN_TO_SERVO(pin)].write(value); + pinState[pin] = value; + break; + case PWM: + if (IS_PIN_PWM(pin)) + analogWrite(PIN_TO_PWM(pin), value); + pinState[pin] = value; + break; + } + } +} + +void digitalWriteCallback(byte port, int value) +{ + byte pin, lastPin, mask=1, pinWriteMask=0; + + if (port < TOTAL_PORTS) { + // create a mask of the pins on this port that are writable. + lastPin = port*8+8; + if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS; + for (pin=port*8; pin < lastPin; pin++) { + // do not disturb non-digital pins (eg, Rx & Tx) + if (IS_PIN_DIGITAL(pin)) { + // only write to OUTPUT and INPUT (enables pullup) + // do not touch pins in PWM, ANALOG, SERVO or other modes + if (pinConfig[pin] == OUTPUT || pinConfig[pin] == INPUT) { + pinWriteMask |= mask; + pinState[pin] = ((byte)value & mask) ? 1 : 0; + } + } + mask = mask << 1; + } + writePort(port, (byte)value, pinWriteMask); + } +} + + +// ----------------------------------------------------------------------------- +/* sets bits in a bit array (int) to toggle the reporting of the analogIns + */ +//void FirmataClass::setAnalogPinReporting(byte pin, byte state) { +//} +void reportAnalogCallback(byte analogPin, int value) +{ + if (analogPin < TOTAL_ANALOG_PINS) { + if(value == 0) { + analogInputsToReport = analogInputsToReport &~ (1 << analogPin); + } else { + analogInputsToReport = analogInputsToReport | (1 << analogPin); + } + } + // TODO: save status to EEPROM here, if changed +} + +void reportDigitalCallback(byte port, int value) +{ + if (port < TOTAL_PORTS) { + reportPINs[port] = (byte)value; + } + // do not disable analog reporting on these 8 pins, to allow some + // pins used for digital, others analog. Instead, allow both types + // of reporting to be enabled, but check if the pin is configured + // as analog when sampling the analog inputs. Likewise, while + // scanning digital pins, portConfigInputs will mask off values from any + // pins configured as analog +} + +/*============================================================================== + * SYSEX-BASED commands + *============================================================================*/ + +void sysexCallback(byte command, byte argc, byte *argv) +{ + switch(command) { + case SERVO_CONFIG: + if(argc > 4) { + // these vars are here for clarity, they'll optimized away by the compiler + byte pin = argv[0]; + int minPulse = argv[1] + (argv[2] << 7); + int maxPulse = argv[3] + (argv[4] << 7); + + if (IS_PIN_SERVO(pin)) { + // servos are pins from 2 to 13, so offset for array + if (servos[PIN_TO_SERVO(pin)].attached()) + servos[PIN_TO_SERVO(pin)].detach(); + servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse); + setPinModeCallback(pin, SERVO); + } + } + break; + case SAMPLING_INTERVAL: + if (argc > 1) + samplingInterval = argv[0] + (argv[1] << 7); + else + Firmata.sendString("Not enough data"); + break; + case EXTENDED_ANALOG: + if (argc > 1) { + int val = argv[1]; + if (argc > 2) val |= (argv[2] << 7); + if (argc > 3) val |= (argv[3] << 14); + analogWriteCallback(argv[0], val); + } + break; + case CAPABILITY_QUERY: + Serial.write(START_SYSEX); + Serial.write(CAPABILITY_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + if (IS_PIN_DIGITAL(pin)) { + Serial.write((byte)INPUT); + Serial.write(1); + Serial.write((byte)OUTPUT); + Serial.write(1); + } + if (IS_PIN_ANALOG(pin)) { + Serial.write(ANALOG); + Serial.write(10); + } + if (IS_PIN_PWM(pin)) { + Serial.write(PWM); + Serial.write(8); + } + if (IS_PIN_SERVO(pin)) { + Serial.write(SERVO); + Serial.write(14); + } + Serial.write(127); + } + Serial.write(END_SYSEX); + break; + case PIN_STATE_QUERY: + if (argc > 0) { + byte pin=argv[0]; + Serial.write(START_SYSEX); + Serial.write(PIN_STATE_RESPONSE); + Serial.write(pin); + if (pin < TOTAL_PINS) { + Serial.write((byte)pinConfig[pin]); + Serial.write((byte)pinState[pin] & 0x7F); + if (pinState[pin] & 0xFF80) Serial.write((byte)(pinState[pin] >> 7) & 0x7F); + if (pinState[pin] & 0xC000) Serial.write((byte)(pinState[pin] >> 14) & 0x7F); + } + Serial.write(END_SYSEX); + } + break; + case ANALOG_MAPPING_QUERY: + Serial.write(START_SYSEX); + Serial.write(ANALOG_MAPPING_RESPONSE); + for (byte pin=0; pin < TOTAL_PINS; pin++) { + Serial.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127); + } + Serial.write(END_SYSEX); + break; + } +} + +/*============================================================================== + * SETUP() + *============================================================================*/ +void setup() +{ + byte i; + + Firmata.setFirmwareVersion(2, 2); + + Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); + Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); + Firmata.attach(REPORT_ANALOG, reportAnalogCallback); + Firmata.attach(REPORT_DIGITAL, reportDigitalCallback); + Firmata.attach(SET_PIN_MODE, setPinModeCallback); + Firmata.attach(START_SYSEX, sysexCallback); + + // TODO: load state from EEPROM here + + /* these are initialized to zero by the compiler startup code + for (i=0; i < TOTAL_PORTS; i++) { + reportPINs[i] = false; + portConfigInputs[i] = 0; + previousPINs[i] = 0; + } + */ + for (i=0; i < TOTAL_PINS; i++) { + if (IS_PIN_ANALOG(i)) { + // turns off pullup, configures everything + setPinModeCallback(i, ANALOG); + } else { + // sets the output to 0, configures portConfigInputs + setPinModeCallback(i, OUTPUT); + } + } + // by defult, do not report any analog inputs + analogInputsToReport = 0; + + Firmata.begin(57600); + + /* send digital inputs to set the initial state on the host computer, + * since once in the loop(), this firmware will only send on change */ + for (i=0; i < TOTAL_PORTS; i++) { + outputPort(i, readPort(i, portConfigInputs[i]), true); + } + + /* init the toggleLed counter */ + toggleMillis = millis(); + pinMode(13, OUTPUT); +} + +/*============================================================================== + * LOOP() + *============================================================================*/ +void loop() +{ + byte pin, analogPin; + + /* DIGITALREAD - as fast as possible, check for changes and output them to the + * FTDI buffer using Serial.print() */ + checkDigitalInputs(); + + //XXX: hack Firmata to blink until serial command arrives + dataOnSerial = Firmata.available(); + if (dataOnSerial > 0 && !firstCommand) { + firstCommand = true; + } + //XXX: do the blink if the first command hasn't arrived yet + // configures pin 13 as output and then back as input + if (!firstCommand) { + toggleLed(); + } + + /* SERIALREAD - processing incoming messagse as soon as possible, while still + * checking digital inputs. */ + while(dataOnSerial) { + Firmata.processInput(); + dataOnSerial = Firmata.available(); + } + + /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over + * 60 bytes. use a timer to sending an event character every 4 ms to + * trigger the buffer to dump. */ + + currentMillis = millis(); + if (currentMillis - previousMillis > samplingInterval) { + previousMillis += samplingInterval; + /* ANALOGREAD - do all analogReads() at the configured sampling interval */ + for(pin=0; pin<TOTAL_PINS; pin++) { + if (IS_PIN_ANALOG(pin) && pinConfig[pin] == ANALOG) { + analogPin = PIN_TO_ANALOG(pin); + if (analogInputsToReport & (1 << analogPin)) { + Firmata.sendAnalog(analogPin, analogRead(analogPin)); + } + } + } + } +} diff --git a/libraries/Firmata/keywords.txt b/libraries/Firmata/keywords.txt new file mode 100644 index 0000000..52e0a9c --- /dev/null +++ b/libraries/Firmata/keywords.txt @@ -0,0 +1,62 @@ +####################################### +# Syntax Coloring Map For Firmata +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +Firmata KEYWORD1 +callbackFunction KEYWORD1 +systemResetCallbackFunction KEYWORD1 +stringCallbackFunction KEYWORD1 +sysexCallbackFunction KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +begin KEYWORD2 +printVersion KEYWORD2 +blinkVersion KEYWORD2 +printFirmwareVersion KEYWORD2 +setFirmwareVersion KEYWORD2 +setFirmwareNameAndVersion KEYWORD2 +available KEYWORD2 +processInput KEYWORD2 +sendAnalog KEYWORD2 +sendDigital KEYWORD2 +sendDigitalPortPair KEYWORD2 +sendDigitalPort KEYWORD2 +sendString KEYWORD2 +sendString KEYWORD2 +sendSysex KEYWORD2 +attach KEYWORD2 +detach KEYWORD2 +flush KEYWORD2 + + +####################################### +# Constants (LITERAL1) +####################################### + +MAX_DATA_BYTES LITERAL1 + +DIGITAL_MESSAGE LITERAL1 +ANALOG_MESSAGE LITERAL1 +REPORT_ANALOG LITERAL1 +REPORT_DIGITAL LITERAL1 +REPORT_VERSION LITERAL1 +SET_PIN_MODE LITERAL1 +SYSTEM_RESET LITERAL1 + +START_SYSEX LITERAL1 +END_SYSEX LITERAL1 + +PWM LITERAL1 + +TOTAL_ANALOG_PINS LITERAL1 +TOTAL_DIGITAL_PINS LITERAL1 +TOTAL_PORTS LITERAL1 +ANALOG_PORT LITERAL1 |