diff options
Diffstat (limited to 'firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h')
| -rw-r--r-- | firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h | 1002 |
1 files changed, 1002 insertions, 0 deletions
diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h new file mode 100644 index 0000000..9f2547a --- /dev/null +++ b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h @@ -0,0 +1,1002 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief FLASHC driver for AVR32 UC3. + * + * AVR32 Flash Controller driver module. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices with a FLASHC module can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _FLASHC_H_ +#define _FLASHC_H_ + +#include <avr32/io.h> +#include <stddef.h> +#include "compiler.h" + +//! Number of flash regions defined by the FLASHC. +#define AVR32_FLASHC_REGIONS (AVR32_FLASHC_FLASH_SIZE /\ + (AVR32_FLASHC_PAGES_PR_REGION * AVR32_FLASHC_PAGE_SIZE)) + + +/*! \name Flash Properties + */ +//! @{ + +/*! \brief Gets the size of the whole flash array. + * + * \return The size of the whole flash array in bytes. + */ +extern unsigned int flashc_get_flash_size(void); + +/*! \brief Gets the total number of pages in the flash array. + * + * \return The total number of pages in the flash array. + */ +extern unsigned int flashc_get_page_count(void); + +/*! \brief Gets the number of pages in each flash region. + * + * \return The number of pages in each flash region. + */ +extern unsigned int flashc_get_page_count_per_region(void); + +/*! \brief Gets the region number of a page. + * + * \param page_number The page number: + * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within + * the flash array; + * \arg <tt>< 0</tt>: the current page number. + * + * \return The region number of the specified page. + */ +extern unsigned int flashc_get_page_region(int page_number); + +/*! \brief Gets the number of the first page of a region. + * + * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>. + * + * \return The number of the first page of the specified region. + */ +extern unsigned int flashc_get_region_first_page_number(unsigned int region); + +//! @} + + +/*! \name FLASHC Control + */ +//! @{ + +/*! \brief Gets the number of wait states of flash read accesses. + * + * \return The number of wait states of flash read accesses. + */ +extern unsigned int flashc_get_wait_state(void); + +/*! \brief Sets the number of wait states of flash read accesses. + * + * \param wait_state The number of wait states of flash read accesses: \c 0 to + * \c 1. + */ +extern void flashc_set_wait_state(unsigned int wait_state); + +/*! \brief Tells whether the Flash Ready interrupt is enabled. + * + * \return Whether the Flash Ready interrupt is enabled. + */ +extern Bool flashc_is_ready_int_enabled(void); + +/*! \brief Enables or disables the Flash Ready interrupt. + * + * \param enable Whether to enable the Flash Ready interrupt: \c TRUE or + * \c FALSE. + */ +extern void flashc_enable_ready_int(Bool enable); + +/*! \brief Tells whether the Lock Error interrupt is enabled. + * + * \return Whether the Lock Error interrupt is enabled. + */ +extern Bool flashc_is_lock_error_int_enabled(void); + +/*! \brief Enables or disables the Lock Error interrupt. + * + * \param enable Whether to enable the Lock Error interrupt: \c TRUE or + * \c FALSE. + */ +extern void flashc_enable_lock_error_int(Bool enable); + +/*! \brief Tells whether the Programming Error interrupt is enabled. + * + * \return Whether the Programming Error interrupt is enabled. + */ +extern Bool flashc_is_prog_error_int_enabled(void); + +/*! \brief Enables or disables the Programming Error interrupt. + * + * \param enable Whether to enable the Programming Error interrupt: \c TRUE or + * \c FALSE. + */ +extern void flashc_enable_prog_error_int(Bool enable); + +//! @} + + +/*! \name FLASHC Status + */ +//! @{ + +/*! \brief Tells whether the FLASHC is ready to run a new command. + * + * \return Whether the FLASHC is ready to run a new command. + */ +extern Bool flashc_is_ready(void); + +/*! \brief Waits actively until the FLASHC is ready to run a new command. + * + * This is the default function assigned to \ref flashc_wait_until_ready. + */ +extern void flashc_default_wait_until_ready(void); + +//! Pointer to the function used by the driver when it needs to wait until the +//! FLASHC is ready to run a new command. +//! The default function is \ref flashc_default_wait_until_ready. +//! The user may change this pointer to use another implementation. +extern void (*volatile flashc_wait_until_ready)(void); + +/*! \brief Tells whether a Lock Error has occurred during the last function + * called that issued one or more FLASHC commands. + * + * \return Whether a Lock Error has occurred during the last function called + * that issued one or more FLASHC commands. + */ +extern Bool flashc_is_lock_error(void); + +/*! \brief Tells whether a Programming Error has occurred during the last + * function called that issued one or more FLASHC commands. + * + * \return Whether a Programming Error has occurred during the last function + * called that issued one or more FLASHC commands. + */ +extern Bool flashc_is_programming_error(void); + +//! @} + + +/*! \name FLASHC Command Control + */ +//! @{ + +/*! \brief Gets the last issued FLASHC command. + * + * \return The last issued FLASHC command. + */ +extern unsigned int flashc_get_command(void); + +/*! \brief Gets the current FLASHC page number. + * + * \return The current FLASHC page number. + */ +extern unsigned int flashc_get_page_number(void); + +/*! \brief Issues a FLASHC command. + * + * \param command The command: \c AVR32_FLASHC_FCMD_CMD_x. + * \param page_number The page number to apply the command to: + * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within + * the flash array; + * \arg <tt>< 0</tt>: use this to apply the command to the current page number + * or if the command does not apply to any page number; + * \arg this argument may have other meanings according to the command. See + * the FLASHC chapter of the MCU datasheet. + * + * \warning A Lock Error is issued if the command violates the protection + * mechanism. + * + * \warning A Programming Error is issued if the command is invalid. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_issue_command(unsigned int command, int page_number); + +//! @} + + +/*! \name FLASHC Global Commands + */ +//! @{ + +/*! \brief Issues a No Operation command to the FLASHC. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_no_operation(void); + +/*! \brief Issues an Erase All command to the FLASHC. + * + * This command erases all bits in the flash array, the general-purpose fuse + * bits and the Security bit. The User page is not erased. + * + * This command also ensures that all volatile memories, such as register file + * and RAMs, are erased before the Security bit is erased, i.e. deactivated. + * + * \warning A Lock Error is issued if at least one region is locked or the + * bootloader protection is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern void flashc_erase_all(void); + +//! @} + + +/*! \name FLASHC Protection Mechanisms + */ +//! @{ + +/*! \brief Tells whether the Security bit is active. + * + * \return Whether the Security bit is active. + */ +extern Bool flashc_is_security_bit_active(void); + +/*! \brief Activates the Security bit. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_activate_security_bit(void); + +/*! \brief Gets the bootloader protected size. + * + * \return The bootloader protected size in bytes. + */ +extern unsigned int flashc_get_bootloader_protected_size(void); + +/*! \brief Sets the bootloader protected size. + * + * \param bootprot_size The wanted bootloader protected size in bytes. If this + * size is not supported, the actual size will be the + * nearest greater available size or the maximal possible + * size if the requested size is too large. + * + * \return The actual bootloader protected size in bytes. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern unsigned int flashc_set_bootloader_protected_size(unsigned int bootprot_size); + +/*! \brief Tells whether external privileged fetch is locked. + * + * \return Whether external privileged fetch is locked. + */ +extern Bool flashc_is_external_privileged_fetch_locked(void); + +/*! \brief Locks or unlocks external privileged fetch. + * + * \param lock Whether to lock external privileged fetch: \c TRUE or \c FALSE. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_external_privileged_fetch(Bool lock); + +/*! \brief Tells whether the region of a page is locked. + * + * \param page_number The page number: + * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within + * the flash array; + * \arg <tt>< 0</tt>: the current page number. + * + * \return Whether the region of the specified page is locked. + */ +extern Bool flashc_is_page_region_locked(int page_number); + +/*! \brief Tells whether a region is locked. + * + * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>. + * + * \return Whether the specified region is locked. + */ +extern Bool flashc_is_region_locked(unsigned int region); + +/*! \brief Locks or unlocks the region of a page. + * + * \param page_number The page number: + * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within + * the flash array; + * \arg <tt>< 0</tt>: the current page number. + * \param lock Whether to lock the region of the specified page: \c TRUE or + * \c FALSE. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_page_region(int page_number, Bool lock); + +/*! \brief Locks or unlocks a region. + * + * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>. + * \param lock Whether to lock the specified region: \c TRUE or \c FALSE. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_region(unsigned int region, Bool lock); + +/*! \brief Locks or unlocks all regions. + * + * \param lock Whether to lock the regions: \c TRUE or \c FALSE. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_lock_all_regions(Bool lock); + +//! @} + + +/*! \name Access to General-Purpose Fuses + */ +//! @{ + +/*! \brief Reads a general-purpose fuse bit. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * + * \return The value of the specified general-purpose fuse bit. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_read_gp_fuse_bit(unsigned int gp_fuse_bit); + +/*! \brief Reads a general-purpose fuse bit-field. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * + * \return The value of the specified general-purpose fuse bit-field. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern U64 flashc_read_gp_fuse_bitfield(unsigned int pos, unsigned int width); + +/*! \brief Reads a general-purpose fuse byte. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * + * \return The value of the specified general-purpose fuse byte. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern U8 flashc_read_gp_fuse_byte(unsigned int gp_fuse_byte); + +/*! \brief Reads all general-purpose fuses. + * + * \return The value of all general-purpose fuses as a word. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern U64 flashc_read_all_gp_fuses(void); + +/*! \brief Erases a general-purpose fuse bit. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_gp_fuse_bit(unsigned int gp_fuse_bit, Bool check); + +/*! \brief Erases a general-purpose fuse bit-field. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_gp_fuse_bitfield(unsigned int pos, unsigned int width, Bool check); + +/*! \brief Erases a general-purpose fuse byte. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_gp_fuse_byte(unsigned int gp_fuse_byte, Bool check); + +/*! \brief Erases all general-purpose fuses. + * + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern Bool flashc_erase_all_gp_fuses(Bool check); + +/*! \brief Writes a general-purpose fuse bit. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * \param value The value of the specified general-purpose fuse bit. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value); + +/*! \brief Writes a general-purpose fuse bit-field. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * \param value The value of the specified general-purpose fuse bit-field. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value); + +/*! \brief Writes a general-purpose fuse byte. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * \param value The value of the specified general-purpose fuse byte. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value); + +/*! \brief Writes all general-purpose fuses. + * + * \param value The value of all general-purpose fuses as a word. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_write_all_gp_fuses(U64 value); + +/*! \brief Sets a general-purpose fuse bit with the appropriate erase and write + * operations. + * + * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63. + * \param value The value of the specified general-purpose fuse bit. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value); + +/*! \brief Sets a general-purpose fuse bit-field with the appropriate erase and + * write operations. + * + * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to + * \c 63. + * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to + * \c 64. + * \param value The value of the specified general-purpose fuse bit-field. + * + * \warning A Lock Error is issued if the Security bit is active and the command + * is applied to BOOTPROT or EPFL fuses. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value); + +/*! \brief Sets a general-purpose fuse byte with the appropriate erase and write + * operations. + * + * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7. + * \param value The value of the specified general-purpose fuse byte. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value); + +/*! \brief Sets all general-purpose fuses with the appropriate erase and write + * operations. + * + * \param value The value of all general-purpose fuses as a word. + * + * \warning A Lock Error is issued if the Security bit is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note The actual number of general-purpose fuse bits implemented by hardware + * is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are + * fixed at 1 by hardware. + */ +extern void flashc_set_all_gp_fuses(U64 value); + +//! @} + + +/*! \name Access to Flash Pages + */ +//! @{ + +/*! \brief Clears the page buffer. + * + * This command resets all bits in the page buffer to one. Write accesses to the + * page buffer can only change page buffer bits from one to zero. + * + * \warning The page buffer is not automatically reset after a page write. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern void flashc_clear_page_buffer(void); + +/*! \brief Tells whether the page to which the last Quick Page Read or Quick + * Page Read User Page command was applied was erased. + * + * \return Whether the page to which the last Quick Page Read or Quick Page Read + * User Page command was applied was erased. + */ +extern Bool flashc_is_page_erased(void); + +/*! \brief Applies the Quick Page Read command to a page. + * + * \param page_number The page number: + * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within + * the flash array; + * \arg <tt>< 0</tt>: the current page number. + * + * \return Whether the specified page is erased. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern Bool flashc_quick_page_read(int page_number); + +/*! \brief Erases a page. + * + * \param page_number The page number: + * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within + * the flash array; + * \arg <tt>< 0</tt>: the current page number. + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if the command is applied to a page belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern Bool flashc_erase_page(int page_number, Bool check); + +/*! \brief Erases all pages within the flash array. + * + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \warning A Lock Error is issued if at least one region is locked or the + * bootloader protection is active. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern Bool flashc_erase_all_pages(Bool check); + +/*! \brief Writes a page from the page buffer. + * + * \param page_number The page number: + * \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within + * the flash array; + * \arg <tt>< 0</tt>: the current page number. + * + * \warning A Lock Error is issued if the command is applied to a page belonging + * to a locked region or to the bootloader protected area. + * + * \warning The page buffer is not automatically reset after a page write. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + */ +extern void flashc_write_page(int page_number); + +/*! \brief Issues a Quick Page Read User Page command to the FLASHC. + * + * \return Whether the User page is erased. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern Bool flashc_quick_user_page_read(void); + +/*! \brief Erases the User page. + * + * \param check Whether to check erase: \c TRUE or \c FALSE. + * + * \return Whether the erase succeeded or always \c TRUE if erase check was not + * requested. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note An erase operation can only set bits. + */ +extern Bool flashc_erase_user_page(Bool check); + +/*! \brief Writes the User page from the page buffer. + * + * \warning The page buffer is not automatically reset after a page write. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + * + * \note A write operation can only clear bits. + */ +extern void flashc_write_user_page(void); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src source byte. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source byte. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset8(volatile void *dst, U8 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source half-word. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source half-word. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset16(volatile void *dst, U16 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source word. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source word. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset32(volatile void *dst, U32 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source double-word. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source double-word. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memset64(volatile void *dst, U64 src, size_t nbytes, Bool erase); + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the repeated \a src big-endian source pattern. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Source double-word. + * \param src_width \a src width in bits: 8, 16, 32 or 64. + * \param nbytes Number of bytes to set. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +#define flashc_memset(dst, src, src_width, nbytes, erase) \ + TPASTE2(flashc_memset, src_width)((dst), (src), (nbytes), (erase)) + +/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst + * from the source pointed to by \a src. + * + * The destination areas that are not within the flash array or the User page + * are ignored. + * + * All pointer and size alignments are supported. + * + * \param dst Pointer to flash destination. + * \param src Pointer to source data. + * \param nbytes Number of bytes to copy. + * \param erase Whether to erase before writing: \c TRUE or \c FALSE. + * + * \return The value of \a dst. + * + * \warning If copying takes place between areas that overlap, the behavior is + * undefined. + * + * \warning This function may be called with \a erase set to \c FALSE only if + * the destination consists only of erased words, i.e. this function + * can not be used to write only one bit of a previously written word. + * E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the + * resulting value in flash may be different from \c 0x00000000. + * + * \warning A Lock Error is issued if the command is applied to pages belonging + * to a locked region or to the bootloader protected area. + * + * \note The FLASHC error status returned by \ref flashc_is_lock_error and + * \ref flashc_is_programming_error is updated. + */ +extern volatile void *flashc_memcpy(volatile void *dst, const void *src, size_t nbytes, Bool erase); + +#if UC3C + +/*! \brief Depednding to the CPU frequency, set the wait states of flash read + * accesses and enable or disable the High speed read mode. + * + * \param cpu_f_hz The CPU frequency + */ +void flashc_set_flash_waitstate_and_readmode(unsigned long cpu_f_hz); +#endif // UC3C device-specific implementation + +//! @} + + +#endif // _FLASHC_H_ |