diff options
Diffstat (limited to 'firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h')
| -rw-r--r-- | firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h deleted file mode 100644 index a577124..0000000 --- a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h +++ /dev/null @@ -1,191 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief AT32UC3A EVK1100 board LEDs support package. - * - * This file contains definitions and services related to the LED features of - * the EVK1100 board. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 AT32UC3A devices can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _LED_H_ -#define _LED_H_ - -#include "compiler.h" - - -/*! \name Identifiers of LEDs to Use with LED Functions - */ -//! @{ -#define LED0 0x01 -#define LED1 0x02 -#define LED2 0x04 -#define LED3 0x08 -#define LED4 0x10 -#define LED5 0x20 -#define LED6 0x40 -#define LED7 0x80 -//! @} - - -/*! \brief Gets the last state of all LEDs set through the LED API. - * - * \return State of all LEDs (1 bit per LED). - * - * \note The GPIO pin configuration of all LEDs is left unchanged. - */ -extern U32 LED_Read_Display(void); - -/*! \brief Sets the state of all LEDs. - * - * \param leds New state of all LEDs (1 bit per LED). - * - * \note The pins of all LEDs are set to GPIO output mode. - */ -extern void LED_Display(U32 leds); - -/*! \brief Gets the last state of the specified LEDs set through the LED API. - * - * \param mask LEDs of which to get the state (1 bit per LED). - * - * \return State of the specified LEDs (1 bit per LED). - * - * \note The GPIO pin configuration of all LEDs is left unchanged. - */ -extern U32 LED_Read_Display_Mask(U32 mask); - -/*! \brief Sets the state of the specified LEDs. - * - * \param mask LEDs of which to set the state (1 bit per LED). - * - * \param leds New state of the specified LEDs (1 bit per LED). - * - * \note The pins of the specified LEDs are set to GPIO output mode. - */ -extern void LED_Display_Mask(U32 mask, U32 leds); - -/*! \brief Tests the last state of the specified LEDs set through the LED API. - * - * \param leds LEDs of which to test the state (1 bit per LED). - * - * \return \c TRUE if at least one of the specified LEDs has a state on, else - * \c FALSE. - * - * \note The GPIO pin configuration of all LEDs is left unchanged. - */ -extern Bool LED_Test(U32 leds); - -/*! \brief Turns off the specified LEDs. - * - * \param leds LEDs to turn off (1 bit per LED). - * - * \note The pins of the specified LEDs are set to GPIO output mode. - */ -extern void LED_Off(U32 leds); - -/*! \brief Turns on the specified LEDs. - * - * \param leds LEDs to turn on (1 bit per LED). - * - * \note The pins of the specified LEDs are set to GPIO output mode. - */ -extern void LED_On(U32 leds); - -/*! \brief Toggles the specified LEDs. - * - * \param leds LEDs to toggle (1 bit per LED). - * - * \note The pins of the specified LEDs are set to GPIO output mode. - */ -extern void LED_Toggle(U32 leds); - -/*! \brief Gets as a bit-field the last state of the specified LEDs set through - * the LED API. - * - * \param field LEDs of which to get the state (1 bit per LED). - * - * \return State of the specified LEDs (1 bit per LED, beginning with the first - * specified LED). - * - * \note The GPIO pin configuration of all LEDs is left unchanged. - */ -extern U32 LED_Read_Display_Field(U32 field); - -/*! \brief Sets as a bit-field the state of the specified LEDs. - * - * \param field LEDs of which to set the state (1 bit per LED). - * \param leds New state of the specified LEDs (1 bit per LED, beginning with - * the first specified LED). - * - * \note The pins of the specified LEDs are set to GPIO output mode. - */ -extern void LED_Display_Field(U32 field, U32 leds); - -/*! \brief Gets the intensity of the specified LED. - * - * \param led LED of which to get the intensity (1 bit per LED; only the least - * significant set bit is used). - * - * \return Intensity of the specified LED (0x00 to 0xFF). - * - * \warning The PWM channel of the specified LED is supposed to be used only by - * this module. - * - * \note The GPIO pin configuration of all LEDs is left unchanged. - */ -extern U8 LED_Get_Intensity(U32 led); - -/*! \brief Sets the intensity of the specified LEDs. - * - * \param leds LEDs of which to set the intensity (1 bit per LED). - * \param intensity New intensity of the specified LEDs (0x00 to 0xFF). - * - * \warning The PWM channels of the specified LEDs are supposed to be used only - * by this module. - * - * \note The pins of the specified LEDs are set to PWM output mode. - */ -extern void LED_Set_Intensity(U32 leds, U8 intensity); - - -#endif // _LED_H_ |