diff options
Diffstat (limited to 'firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/SERVICES/MEMORY')
2 files changed, 940 insertions, 0 deletions
diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/SERVICES/MEMORY/CTRL_ACCESS/ctrl_access.c b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/SERVICES/MEMORY/CTRL_ACCESS/ctrl_access.c new file mode 100644 index 0000000..09790c2 --- /dev/null +++ b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/SERVICES/MEMORY/CTRL_ACCESS/ctrl_access.c @@ -0,0 +1,571 @@ +/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Abstraction layer for memory interfaces. + * + * This module contains the interfaces: + * - MEM <-> USB; + * - MEM <-> RAM; + * - MEM <-> MEM. + * + * This module may be configured and expanded to support the following features: + * - write-protected globals; + * - password-protected data; + * - specific features; + * - etc. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +//_____ I N C L U D E S ____________________________________________________ + +#include "compiler.h" +#include "preprocessor.h" +#ifdef FREERTOS_USED +#include "FreeRTOS.h" +#include "semphr.h" +#endif +#include "ctrl_access.h" + + +//_____ D E F I N I T I O N S ______________________________________________ + +#ifdef FREERTOS_USED + +/*! \name LUN Access Protection Macros + */ +//! @{ + +/*! \brief Locks accesses to LUNs. + * + * \return \c TRUE if the access was successfully locked, else \c FALSE. + */ +#define Ctrl_access_lock() ctrl_access_lock() + +/*! \brief Unlocks accesses to LUNs. + */ +#define Ctrl_access_unlock() xSemaphoreGive(ctrl_access_semphr) + +//! @} + +//! Handle to the semaphore protecting accesses to LUNs. +static xSemaphoreHandle ctrl_access_semphr = NULL; + +#else + +/*! \name LUN Access Protection Macros + */ +//! @{ + +/*! \brief Locks accesses to LUNs. + * + * \return \c TRUE if the access was successfully locked, else \c FALSE. + */ +#define Ctrl_access_lock() TRUE + +/*! \brief Unlocks accesses to LUNs. + */ +#define Ctrl_access_unlock() + +//! @} + +#endif // FREERTOS_USED + + +#if MAX_LUN + +/*! \brief Initializes an entry of the LUN descriptor table. + * + * \param lun Logical Unit Number. + * + * \return LUN descriptor table entry initializer. + */ +#if ACCESS_USB == ENABLED && ACCESS_MEM_TO_RAM == ENABLED +#define Lun_desc_entry(lun) \ + {\ + TPASTE3(Lun_, lun, _test_unit_ready),\ + TPASTE3(Lun_, lun, _read_capacity),\ + TPASTE3(Lun_, lun, _wr_protect),\ + TPASTE3(Lun_, lun, _removal),\ + TPASTE3(Lun_, lun, _usb_read_10),\ + TPASTE3(Lun_, lun, _usb_write_10),\ + TPASTE3(Lun_, lun, _mem_2_ram),\ + TPASTE3(Lun_, lun, _ram_2_mem),\ + TPASTE3(LUN_, lun, _NAME)\ + } +#elif ACCESS_USB == ENABLED +#define Lun_desc_entry(lun) \ + {\ + TPASTE3(Lun_, lun, _test_unit_ready),\ + TPASTE3(Lun_, lun, _read_capacity),\ + TPASTE3(Lun_, lun, _wr_protect),\ + TPASTE3(Lun_, lun, _removal),\ + TPASTE3(Lun_, lun, _usb_read_10),\ + TPASTE3(Lun_, lun, _usb_write_10),\ + TPASTE3(LUN_, lun, _NAME)\ + } +#elif ACCESS_MEM_TO_RAM == ENABLED +#define Lun_desc_entry(lun) \ + {\ + TPASTE3(Lun_, lun, _test_unit_ready),\ + TPASTE3(Lun_, lun, _read_capacity),\ + TPASTE3(Lun_, lun, _wr_protect),\ + TPASTE3(Lun_, lun, _removal),\ + TPASTE3(Lun_, lun, _mem_2_ram),\ + TPASTE3(Lun_, lun, _ram_2_mem),\ + TPASTE3(LUN_, lun, _NAME)\ + } +#else +#define Lun_desc_entry(lun) \ + {\ + TPASTE3(Lun_, lun, _test_unit_ready),\ + TPASTE3(Lun_, lun, _read_capacity),\ + TPASTE3(Lun_, lun, _wr_protect),\ + TPASTE3(Lun_, lun, _removal),\ + TPASTE3(LUN_, lun, _NAME)\ + } +#endif + +//! LUN descriptor table. +static const struct +{ + Ctrl_status (*test_unit_ready)(void); + Ctrl_status (*read_capacity)(U32 *); + Bool (*wr_protect)(void); + Bool (*removal)(void); +#if ACCESS_USB == ENABLED + Ctrl_status (*usb_read_10)(U32, U16); + Ctrl_status (*usb_write_10)(U32, U16); +#endif +#if ACCESS_MEM_TO_RAM == ENABLED + Ctrl_status (*mem_2_ram)(U32, void *); + Ctrl_status (*ram_2_mem)(U32, const void *); +#endif + const char *name; +} lun_desc[MAX_LUN] = +{ +#if LUN_0 == ENABLE + Lun_desc_entry(0), +#endif +#if LUN_1 == ENABLE + Lun_desc_entry(1), +#endif +#if LUN_2 == ENABLE + Lun_desc_entry(2), +#endif +#if LUN_3 == ENABLE + Lun_desc_entry(3), +#endif +#if LUN_4 == ENABLE + Lun_desc_entry(4), +#endif +#if LUN_5 == ENABLE + Lun_desc_entry(5), +#endif +#if LUN_6 == ENABLE + Lun_desc_entry(6), +#endif +#if LUN_7 == ENABLE + Lun_desc_entry(7) +#endif +}; + +#endif + + +#if GLOBAL_WR_PROTECT == ENABLED +Bool g_wr_protect; +#endif + + +/*! \name Control Interface + */ +//! @{ + + +#ifdef FREERTOS_USED + +Bool ctrl_access_init(void) +{ + // If the handle to the protecting semaphore is not valid, + if (!ctrl_access_semphr) + { + // try to create the semaphore. + vSemaphoreCreateBinary(ctrl_access_semphr); + + // If the semaphore could not be created, there is no backup solution. + if (!ctrl_access_semphr) return FALSE; + } + + return TRUE; +} + + +/*! \brief Locks accesses to LUNs. + * + * \return \c TRUE if the access was successfully locked, else \c FALSE. + */ +static Bool ctrl_access_lock(void) +{ + // If the semaphore could not be created, there is no backup solution. + if (!ctrl_access_semphr) return FALSE; + + // Wait for the semaphore. + while (!xSemaphoreTake(ctrl_access_semphr, portMAX_DELAY)); + + return TRUE; +} + +#endif // FREERTOS_USED + + +U8 get_nb_lun(void) +{ +#if MEM_USB == ENABLE + U8 nb_lun; + + if (!Ctrl_access_lock()) return MAX_LUN; + + nb_lun = MAX_LUN + host_get_lun(); + + Ctrl_access_unlock(); + + return nb_lun; +#else + return MAX_LUN; +#endif +} + + +U8 get_cur_lun(void) +{ + return LUN_ID_0; +} + + +Ctrl_status mem_test_unit_ready(U8 lun) +{ + Ctrl_status status; + + if (!Ctrl_access_lock()) return CTRL_FAIL; + + status = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].test_unit_ready() : +#endif +#if LUN_USB == ENABLE + Lun_usb_test_unit_ready(lun - LUN_ID_USB); +#else + CTRL_FAIL; +#endif + + Ctrl_access_unlock(); + + return status; +} + + +Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector) +{ + Ctrl_status status; + + if (!Ctrl_access_lock()) return CTRL_FAIL; + + status = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].read_capacity(u32_nb_sector) : +#endif +#if LUN_USB == ENABLE + Lun_usb_read_capacity(lun - LUN_ID_USB, u32_nb_sector); +#else + CTRL_FAIL; +#endif + + Ctrl_access_unlock(); + + return status; +} + + +U8 mem_sector_size(U8 lun) +{ + U8 sector_size; + + if (!Ctrl_access_lock()) return 0; + + sector_size = +#if MAX_LUN + (lun < MAX_LUN) ? 1 : +#endif +#if LUN_USB == ENABLE + Lun_usb_read_sector_size(lun - LUN_ID_USB); +#else + 0; +#endif + + Ctrl_access_unlock(); + + return sector_size; +} + + +Bool mem_wr_protect(U8 lun) +{ + Bool wr_protect; + + if (!Ctrl_access_lock()) return TRUE; + + wr_protect = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].wr_protect() : +#endif +#if LUN_USB == ENABLE + Lun_usb_wr_protect(lun - LUN_ID_USB); +#else + TRUE; +#endif + + Ctrl_access_unlock(); + + return wr_protect; +} + + +Bool mem_removal(U8 lun) +{ + Bool removal; + + if (!Ctrl_access_lock()) return TRUE; + + removal = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].removal() : +#endif +#if LUN_USB == ENABLE + Lun_usb_removal(); +#else + TRUE; +#endif + + Ctrl_access_unlock(); + + return removal; +} + + +const char *mem_name(U8 lun) +{ + return +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].name : +#endif +#if LUN_USB == ENABLE + LUN_USB_NAME; +#else + NULL; +#endif +} + + +//! @} + + +#if ACCESS_USB == ENABLED + +/*! \name MEM <-> USB Interface + */ +//! @{ + + +Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector) +{ + Ctrl_status status; + + if (!Ctrl_access_lock()) return CTRL_FAIL; + + memory_start_read_action(nb_sector); + status = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].usb_read_10(addr, nb_sector) : +#endif + CTRL_FAIL; + memory_stop_read_action(); + + Ctrl_access_unlock(); + + return status; +} + + +Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector) +{ + Ctrl_status status; + + if (!Ctrl_access_lock()) return CTRL_FAIL; + + memory_start_write_action(nb_sector); + status = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].usb_write_10(addr, nb_sector) : +#endif + CTRL_FAIL; + memory_stop_write_action(); + + Ctrl_access_unlock(); + + return status; +} + + +//! @} + +#endif // ACCESS_USB == ENABLED + + +#if ACCESS_MEM_TO_RAM == ENABLED + +/*! \name MEM <-> RAM Interface + */ +//! @{ + + +Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram) +{ + Ctrl_status status; + + if (!Ctrl_access_lock()) return CTRL_FAIL; + + memory_start_read_action(1); + status = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].mem_2_ram(addr, ram) : +#endif +#if LUN_USB == ENABLE + Lun_usb_mem_2_ram(addr, ram); +#else + CTRL_FAIL; +#endif + memory_stop_read_action(); + + Ctrl_access_unlock(); + + return status; +} + + +Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram) +{ + Ctrl_status status; + + if (!Ctrl_access_lock()) return CTRL_FAIL; + + memory_start_write_action(1); + status = +#if MAX_LUN + (lun < MAX_LUN) ? lun_desc[lun].ram_2_mem(addr, ram) : +#endif +#if LUN_USB == ENABLE + Lun_usb_ram_2_mem(addr, ram); +#else + CTRL_FAIL; +#endif + memory_stop_write_action(); + + Ctrl_access_unlock(); + + return status; +} + + +//! @} + +#endif // ACCESS_MEM_TO_RAM == ENABLED + + +#if ACCESS_STREAM == ENABLED + +/*! \name Streaming MEM <-> MEM Interface + */ +//! @{ + + + #if ACCESS_MEM_TO_MEM == ENABLED + +#include "fat.h" + +Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_addr, U16 nb_sector) +{ +#if (defined __GNUC__) && (defined __AVR32__) + __attribute__((__aligned__(4))) +#elif (defined __ICCAVR32__) + #pragma data_alignment = 4 +#endif + static U8 sector_buf[FS_512B]; + Ctrl_status status = CTRL_GOOD; + + while (nb_sector--) + { + if ((status = memory_2_ram(src_lun, src_addr++, sector_buf)) != CTRL_GOOD) break; + if ((status = ram_2_memory(dest_lun, dest_addr++, sector_buf)) != CTRL_GOOD) break; + } + + return status; +} + + #endif // ACCESS_MEM_TO_MEM == ENABLED + + +Ctrl_status stream_state(U8 id) +{ + return CTRL_GOOD; +} + + +U16 stream_stop(U8 id) +{ + return 0; +} + + +//! @} + +#endif // ACCESS_STREAM == ENABLED diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/SERVICES/MEMORY/CTRL_ACCESS/ctrl_access.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/SERVICES/MEMORY/CTRL_ACCESS/ctrl_access.h new file mode 100644 index 0000000..358bf65 --- /dev/null +++ b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/SERVICES/MEMORY/CTRL_ACCESS/ctrl_access.h @@ -0,0 +1,369 @@ +/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ + +/*This file is prepared for Doxygen automatic documentation generation.*/ +/*! \file ********************************************************************* + * + * \brief Abstraction layer for memory interfaces. + * + * This module contains the interfaces: + * - MEM <-> USB; + * - MEM <-> RAM; + * - MEM <-> MEM. + * + * This module may be configured and expanded to support the following features: + * - write-protected globals; + * - password-protected data; + * - specific features; + * - etc. + * + * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 + * - Supported devices: All AVR32 devices can be used. + * - AppNote: + * + * \author Atmel Corporation: http://www.atmel.com \n + * Support and FAQ: http://support.atmel.no/ + * + ******************************************************************************/ + +/* Copyright (c) 2009 Atmel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an Atmel + * AVR product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE + * + */ + +#ifndef _CTRL_ACCESS_H_ +#define _CTRL_ACCESS_H_ + +#include "compiler.h" +#include "conf_access.h" + + +//! Status returned by CTRL_ACCESS interfaces. +typedef enum +{ + CTRL_GOOD = PASS, //!< Success, memory ready. + CTRL_FAIL = FAIL, //!< An error occurred. + CTRL_NO_PRESENT = FAIL + 1, //!< Memory unplugged. + CTRL_BUSY = FAIL + 2 //!< Memory not initialized or changed. +} Ctrl_status; + + +// FYI: Each Logical Unit Number (LUN) corresponds to a memory. + +// Check LUN defines. +#ifndef LUN_0 + #error LUN_0 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_1 + #error LUN_1 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_2 + #error LUN_2 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_3 + #error LUN_3 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_4 + #error LUN_4 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_5 + #error LUN_5 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_6 + #error LUN_6 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_7 + #error LUN_7 must be defined as ENABLE or DISABLE in conf_access.h +#endif +#ifndef LUN_USB + #error LUN_USB must be defined as ENABLE or DISABLE in conf_access.h +#endif + +/*! \name LUN IDs + */ +//! @{ +#define LUN_ID_0 (0) //!< First static LUN. +#define LUN_ID_1 (LUN_ID_0 + LUN_0) +#define LUN_ID_2 (LUN_ID_1 + LUN_1) +#define LUN_ID_3 (LUN_ID_2 + LUN_2) +#define LUN_ID_4 (LUN_ID_3 + LUN_3) +#define LUN_ID_5 (LUN_ID_4 + LUN_4) +#define LUN_ID_6 (LUN_ID_5 + LUN_5) +#define LUN_ID_7 (LUN_ID_6 + LUN_6) +#define MAX_LUN (LUN_ID_7 + LUN_7) //!< Number of static LUNs. +#define LUN_ID_USB (MAX_LUN) //!< First dynamic LUN (USB host mass storage). +//! @} + + +// Include LUN header files. +#if LUN_0 == ENABLE + #include LUN_0_INCLUDE +#endif +#if LUN_1 == ENABLE + #include LUN_1_INCLUDE +#endif +#if LUN_2 == ENABLE + #include LUN_2_INCLUDE +#endif +#if LUN_3 == ENABLE + #include LUN_3_INCLUDE +#endif +#if LUN_4 == ENABLE + #include LUN_4_INCLUDE +#endif +#if LUN_5 == ENABLE + #include LUN_5_INCLUDE +#endif +#if LUN_6 == ENABLE + #include LUN_6_INCLUDE +#endif +#if LUN_7 == ENABLE + #include LUN_7_INCLUDE +#endif +#if LUN_USB == ENABLE + #include LUN_USB_INCLUDE +#endif + + +// Check the configuration of write protection in conf_access.h. +#ifndef GLOBAL_WR_PROTECT + #error GLOBAL_WR_PROTECT must be defined as ENABLED or DISABLED in conf_access.h +#endif + + +#if GLOBAL_WR_PROTECT == ENABLED + +//! Write protect. +extern Bool g_wr_protect; + +#endif + + +/*! \name Control Interface + */ +//! @{ + +#ifdef FREERTOS_USED + +/*! \brief Initializes the LUN access locker. + * + * \return \c TRUE if the locker was successfully initialized, else \c FALSE. + */ +extern Bool ctrl_access_init(void); + +#endif // FREERTOS_USED + +/*! \brief Returns the number of LUNs. + * + * \return Number of LUNs in the system. + */ +extern U8 get_nb_lun(void); + +/*! \brief Returns the current LUN. + * + * \return Current LUN. + * + * \todo Implement. + */ +extern U8 get_cur_lun(void); + +/*! \brief Tests the memory state and initializes the memory if required. + * + * The TEST UNIT READY SCSI primary command allows an application client to poll + * a LUN until it is ready without having to allocate memory for returned data. + * + * This command may be used to check the media status of LUNs with removable + * media. + * + * \param lun Logical Unit Number. + * + * \return Status. + */ +extern Ctrl_status mem_test_unit_ready(U8 lun); + +/*! \brief Returns the address of the last valid sector (512 bytes) in the + * memory. + * + * \param lun Logical Unit Number. + * \param u32_nb_sector Pointer to the address of the last valid sector. + * + * \return Status. + */ +extern Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector); + +/*! \brief Returns the size of the physical sector. + * + * \param lun Logical Unit Number. + * + * \return Sector size (unit: 512 bytes). + */ +extern U8 mem_sector_size(U8 lun); + +/*! \brief Returns the write-protection state of the memory. + * + * \param lun Logical Unit Number. + * + * \return \c TRUE if the memory is write-protected, else \c FALSE. + * + * \note Only used by removable memories with hardware-specific write + * protection. + */ +extern Bool mem_wr_protect(U8 lun); + +/*! \brief Tells whether the memory is removable. + * + * \param lun Logical Unit Number. + * + * \return \c TRUE if the memory is removable, else \c FALSE. + */ +extern Bool mem_removal(U8 lun); + +/*! \brief Returns a pointer to the LUN name. + * + * \param lun Logical Unit Number. + * + * \return Pointer to the LUN name string. + */ +extern const char *mem_name(U8 lun); + +//! @} + + +#if ACCESS_USB == ENABLED + +/*! \name MEM <-> USB Interface + */ +//! @{ + +/*! \brief Tranfers data from the memory to USB. + * + * \param lun Logical Unit Number. + * \param addr Address of first memory sector to read. + * \param nb_sector Number of sectors to transfer. + * + * \return Status. + */ +extern Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector); + +/*! \brief Tranfers data from USB to the memory. + * + * \param lun Logical Unit Number. + * \param addr Address of first memory sector to write. + * \param nb_sector Number of sectors to transfer. + * + * \return Status. + */ +extern Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector); + +//! @} + +#endif // ACCESS_USB == ENABLED + + +#if ACCESS_MEM_TO_RAM == ENABLED + +/*! \name MEM <-> RAM Interface + */ +//! @{ + +/*! \brief Copies 1 data sector from the memory to RAM. + * + * \param lun Logical Unit Number. + * \param addr Address of first memory sector to read. + * \param ram Pointer to RAM buffer to write. + * + * \return Status. + */ +extern Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram); + +/*! \brief Copies 1 data sector from RAM to the memory. + * + * \param lun Logical Unit Number. + * \param addr Address of first memory sector to write. + * \param ram Pointer to RAM buffer to read. + * + * \return Status. + */ +extern Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram); + +//! @} + +#endif // ACCESS_MEM_TO_RAM == ENABLED + + +#if ACCESS_STREAM == ENABLED + +/*! \name Streaming MEM <-> MEM Interface + */ +//! @{ + +//! Erroneous streaming data transfer ID. +#define ID_STREAM_ERR 0xFF + + #if ACCESS_MEM_TO_MEM == ENABLED + +/*! \brief Copies data from one memory to another. + * + * \param src_lun Source Logical Unit Number. + * \param src_addr Source address of first memory sector to read. + * \param dest_lun Destination Logical Unit Number. + * \param dest_addr Destination address of first memory sector to write. + * \param nb_sector Number of sectors to copy. + * + * \return Status. + */ +extern Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_addr, U16 nb_sector); + + #endif // ACCESS_MEM_TO_MEM == ENABLED + +/*! \brief Returns the state of a streaming data transfer. + * + * \param id Transfer ID. + * + * \return Status. + * + * \todo Implement. + */ +extern Ctrl_status stream_state(U8 id); + +/*! \brief Stops a streaming data transfer. + * + * \param id Transfer ID. + * + * \return Number of remaining sectors. + * + * \todo Implement. + */ +extern U16 stream_stop(U8 id); + +//! @} + +#endif // ACCESS_STREAM == ENABLED + + +#endif // _CTRL_ACCESS_H_ |