diff options
Diffstat (limited to 'firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/SPI/spi.h')
| -rw-r--r-- | firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/SPI/spi.h | 342 |
1 files changed, 0 insertions, 342 deletions
diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/SPI/spi.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/SPI/spi.h deleted file mode 100644 index 6dcc928..0000000 --- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/SPI/spi.h +++ /dev/null @@ -1,342 +0,0 @@ -/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */ - -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief SPI driver for AVR32 UC3. - * - * This file defines a useful set of functions for the SPI interface on AVR32 - * devices. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices with an SPI module can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2009 Atmel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an Atmel - * AVR product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE - * - */ - -#ifndef _SPI_H_ -#define _SPI_H_ - -#include <avr32/io.h> - - -//! Time-out value (number of attempts). -#define SPI_TIMEOUT 10000 - - -//! Status codes used by the SPI driver. -typedef enum -{ - SPI_ERROR = -1, - SPI_OK = 0, - SPI_ERROR_TIMEOUT = 1, - SPI_ERROR_ARGUMENT, - SPI_ERROR_OVERRUN, - SPI_ERROR_MODE_FAULT, - SPI_ERROR_OVERRUN_AND_MODE_FAULT -} spi_status_t; - -//! Option structure for SPI channels. -typedef struct -{ - //! The SPI channel to set up. - unsigned char reg; - - //! Preferred baudrate for the SPI. - unsigned int baudrate; - - //! Number of bits in each character (8 to 16). - unsigned char bits; - - //! Delay before first clock pulse after selecting slave (in PBA clock periods). - unsigned char spck_delay; - - //! Delay between each transfer/character (in PBA clock periods). - unsigned char trans_delay; - - //! Sets this chip to stay active after last transfer to it. - unsigned char stay_act; - - //! Which SPI mode to use when transmitting. - unsigned char spi_mode; - - //! Disables the mode fault detection. - //! With this bit cleared, the SPI master mode will disable itself if another - //! master tries to address it. - unsigned char modfdis; -} spi_options_t; - - -/*! \brief Resets the SPI controller. - * - * \param spi Base address of the SPI instance. - */ -extern void spi_reset(volatile avr32_spi_t *spi); - -/*! \brief Initializes the SPI in slave mode. - * - * \param spi Base address of the SPI instance. - * \param bits Number of bits in each transmitted character (8 to 16). - * \param spi_mode Clock polarity and phase. - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_ARGUMENT Invalid argument(s) passed. - */ -extern spi_status_t spi_initSlave(volatile avr32_spi_t *spi, - unsigned char bits, - unsigned char spi_mode); - -/*! \brief Sets up the SPI in a test mode where the transmitter is connected to - * the receiver (local loopback). - * - * \param spi Base address of the SPI instance. - * - * \return Status. - * \retval SPI_OK Success. - */ -extern spi_status_t spi_initTest(volatile avr32_spi_t *spi); - -/*! \brief Initializes the SPI in master mode. - * - * \param spi Base address of the SPI instance. - * \param options Pointer to a structure containing initialization options. - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_ARGUMENT Invalid argument(s) passed. - */ -extern spi_status_t spi_initMaster(volatile avr32_spi_t *spi, const spi_options_t *options); - -/*! \brief Sets up how and when the slave chips are selected (master mode only). - * - * \param spi Base address of the SPI instance. - * \param variable_ps Target slave is selected in transfer register for every - * character to transmit. - * \param pcs_decode The four chip select lines are decoded externally. Values - * 0 to 14 can be given to \ref spi_selectChip. - * \param delay Delay in PBA periods between chip selects. - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_ARGUMENT Invalid argument(s) passed. - */ -extern spi_status_t spi_selectionMode(volatile avr32_spi_t *spi, - unsigned char variable_ps, - unsigned char pcs_decode, - unsigned char delay); - -/*! \brief Selects slave chip. - * - * \param spi Base address of the SPI instance. - * \param chip Slave chip number (normal: 0 to 3, extarnally decoded signal: 0 - * to 14). - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_ARGUMENT Invalid argument(s) passed. - */ -extern spi_status_t spi_selectChip(volatile avr32_spi_t *spi, unsigned char chip); - -/*! \brief Unselects slave chip. - * - * \param spi Base address of the SPI instance. - * \param chip Slave chip number (normal: 0 to 3, extarnally decoded signal: 0 - * to 14). - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_TIMEOUT Time-out. - * - * \note Will block program execution until time-out occurs if last transmission - * is not complete. Invoke \ref spi_writeEndCheck beforehand if needed. - */ -extern spi_status_t spi_unselectChip(volatile avr32_spi_t *spi, unsigned char chip); - -/*! \brief Sets options for a specific slave chip. - * - * The baudrate field has to be written before transfer in master mode. Four - * similar registers exist, one for each slave. When using encoded slave - * addressing, reg=0 sets options for slaves 0 to 3, reg=1 for slaves 4 to 7 and - * so on. - * - * \param spi Base address of the SPI instance. - * \param options Pointer to a structure containing initialization options for - * an SPI channel. - * \param pba_hz SPI module input clock frequency (PBA clock, Hz). - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_ARGUMENT Invalid argument(s) passed. - */ -extern spi_status_t spi_setupChipReg(volatile avr32_spi_t *spi, - const spi_options_t *options, - unsigned int pba_hz); - -/*! \brief Enables the SPI. - * - * \param spi Base address of the SPI instance. - */ -extern void spi_enable(volatile avr32_spi_t *spi); - -/*! \brief Disables the SPI. - * - * Ensures that nothing is transferred while setting up buffers. - * - * \param spi Base address of the SPI instance. - * - * \warning This may cause data loss if used on a slave SPI. - */ -extern void spi_disable(volatile avr32_spi_t *spi); - -/*! \brief Tests if the SPI is enabled. - * - * \param spi Base address of the SPI instance. - * - * \return \c 1 if the SPI is enabled, otherwise \c 0. - */ -extern int spi_is_enabled(volatile avr32_spi_t *spi); - -/*! \brief Checks if there is no data in the transmit register. - * - * \param spi Base address of the SPI instance. - * - * \return Status. - * \retval 1 No data in TDR. - * \retval 0 Some data in TDR. - */ -extern unsigned char spi_writeRegisterEmptyCheck(volatile avr32_spi_t *spi); - -/*! \brief Writes one data word in master fixed peripheral select mode or in - * slave mode. - * - * \param spi Base address of the SPI instance. - * \param data The data word to write. - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_TIMEOUT Time-out. - * - * \note Will block program execution until time-out occurs if transmitter is - * busy and transmit buffer is full. Invoke - * \ref spi_writeRegisterEmptyCheck beforehand if needed. - * - * \note Once the data has been written to the transmit buffer, the end of - * transmission is not waited for. Invoke \ref spi_writeEndCheck if - * needed. - */ -extern spi_status_t spi_write(volatile avr32_spi_t *spi, unsigned short data); - -/*! \brief Selects a slave in master variable peripheral select mode and writes - * one data word to it. - * - * \param spi Base address of the SPI instance. - * \param data The data word to write. - * \param pcs Slave selector (bit 0 -> nCS line 0, bit 1 -> nCS line 1, - * etc.). - * \param lastxfer Boolean indicating whether this is the last data word - * transfer. - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_TIMEOUT Time-out. - * \retval SPI_ERROR_ARGUMENT Invalid argument(s) passed. - * - * \note Will block program execution until time-out occurs if transmitter is - * busy and transmit buffer is full. Invoke - * \ref spi_writeRegisterEmptyCheck beforehand if needed. - * - * \note Once the data has been written to the transmit buffer, the end of - * transmission is not waited for. Invoke \ref spi_writeEndCheck if - * needed. - */ -extern spi_status_t spi_variableSlaveWrite(volatile avr32_spi_t *spi, - unsigned short data, - unsigned char pcs, - unsigned char lastxfer); - -/*! \brief Checks if all transmissions are complete. - * - * \param spi Base address of the SPI instance. - * - * \return Status. - * \retval 1 All transmissions complete. - * \retval 0 Transmissions not complete. - */ -extern unsigned char spi_writeEndCheck(volatile avr32_spi_t *spi); - -/*! \brief Checks if there is data in the receive register. - * - * \param spi Base address of the SPI instance. - * - * \return Status. - * \retval 1 Some data in RDR. - * \retval 0 No data in RDR. - */ -extern unsigned char spi_readRegisterFullCheck(volatile avr32_spi_t *spi); - -/*! \brief Reads one data word in master mode or in slave mode. - * - * \param spi Base address of the SPI instance. - * \param data Pointer to the location where to store the received data word. - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_TIMEOUT Time-out. - * - * \note Will block program execution until time-out occurs if no data is - * received or last transmission is not complete. Invoke - * \ref spi_writeEndCheck or \ref spi_readRegisterFullCheck beforehand if - * needed. - */ -extern spi_status_t spi_read(volatile avr32_spi_t *spi, unsigned short *data); - -/*! \brief Gets status information from the SPI. - * - * \param spi Base address of the SPI instance. - * - * \return Status. - * \retval SPI_OK Success. - * \retval SPI_ERROR_OVERRUN Overrun error. - * \retval SPI_ERROR_MODE_FAULT Mode fault (SPI addressed as slave - * while in master mode). - * \retval SPI_ERROR_OVERRUN_AND_MODE_FAULT Overrun error and mode fault. - */ -extern unsigned char spi_getStatus(volatile avr32_spi_t *spi); - - -#endif // _SPI_H_ |