diff options
Diffstat (limited to 'firmwares/arduino-usbserial/readme.txt')
| -rw-r--r-- | firmwares/arduino-usbserial/readme.txt | 13 |
1 files changed, 0 insertions, 13 deletions
diff --git a/firmwares/arduino-usbserial/readme.txt b/firmwares/arduino-usbserial/readme.txt deleted file mode 100644 index 289326b..0000000 --- a/firmwares/arduino-usbserial/readme.txt +++ /dev/null @@ -1,13 +0,0 @@ -To setup the project and upload the Arduino usbserial application firmware to an ATMEGA8U2 using the Arduino USB DFU bootloader: -1. unpack the source into LUFA's Projects directory -2. set ARDUINO_MODEL_PID in the makefile as appropriate -3. do "make clean; make" -4. put the 8U2 into USB DFU mode: -4.a. assert and hold the 8U2's RESET line -4.b. assert and hold the 8U2's HWB line -4.c. release the 8U2's RESET line -4.d. release the 8U2's HWB line -5. confirm that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU" -6. do "make dfu" (OS X or Linux - dfu-programmer must be installed first) or "make flip" (Windows - Flip must be installed first) - -Check that the board enumerates as either "Arduino Uno" or "Arduino Mega 2560". Test by uploading a new Arduino sketch from the Arduino IDE. |