1 files changed, 32 insertions, 29 deletions

diff --git a/cores/arduino/Tone.cpp b/cores/arduino/Tone.cpp
index 827fe49..3da5eb8 100755
--- a/cores/arduino/Tone.cpp
+++ b/cores/arduino/Tone.cpp
@@ -349,39 +349,27 @@ void tone(uint8_t _pin, unsigned int frequency, unsigned long duration)
 }
 
 
-void noTone(uint8_t _pin)
+// XXX: this function only works properly for timer 2 (the only one we use
+// currently).  for the others, it should end the tone, but won't restore
+// proper PWM functionality for the timer.
+void disableTimer(uint8_t _timer)
 {
-  int8_t _timer = -1;
-  
-  for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
-    if (tone_pins[i] == _pin) {
-      _timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
-      tone_pins[i] = 255;
-    }
-  }
-  
   switch (_timer)
   {
-#if defined(__AVR_ATmega8__)
-    case 1:
-      bitWrite(TIMSK1, OCIE1A, 0);
-      break;
-    case 2:
-      bitWrite(TIMSK2, OCIE2A, 0);
-      break;
-
-#else
+#if !defined(__AVR_ATmega8__)
     case 0:
       TIMSK0 = 0;
       break;
+#endif
     case 1:
-      TIMSK1 = 0;
+      bitWrite(TIMSK1, OCIE1A, 0);
       break;
     case 2:
-      TIMSK2 = 0;
+      bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt
+      TCCR2A = (1 << WGM20);
+      TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22);
+      OCR2A = 0;
       break;
-#endif
-
 #if defined(__AVR_ATmega1280__)
     case 3:
       TIMSK3 = 0;
@@ -394,6 +382,21 @@ void noTone(uint8_t _pin)
       break;
 #endif
   }
+}
+
+
+void noTone(uint8_t _pin)
+{
+  int8_t _timer = -1;
+  
+  for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
+    if (tone_pins[i] == _pin) {
+      _timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
+      tone_pins[i] = 255;
+    }
+  }
+  
+  disableTimer(_timer);
 
   digitalWrite(_pin, 0);
 }
@@ -412,7 +415,7 @@ ISR(TIMER0_COMPA_vect)
   }
   else
   {
-    TIMSK0 = 0;   // disable the interrupt
+    disableTimer(0);
     *timer0_pin_port &= ~(timer0_pin_mask);  // keep pin low after stop
   }
 }
@@ -431,7 +434,7 @@ ISR(TIMER1_COMPA_vect)
   }
   else
   {
-    TIMSK1 = 0;   // disable the interrupt
+    disableTimer(1);
     *timer1_pin_port &= ~(timer1_pin_mask);  // keep pin low after stop
   }
 }
@@ -451,7 +454,7 @@ ISR(TIMER2_COMPA_vect)
   }
   else
   {
-    TIMSK2 = 0;   // disable the interrupt
+    disableTimer(2);
     *timer2_pin_port &= ~(timer2_pin_mask);  // keep pin low after stop
   }
 }
@@ -473,7 +476,7 @@ ISR(TIMER3_COMPA_vect)
   }
   else
   {
-    TIMSK3 = 0;   // disable the interrupt
+    disableTimer(3);
     *timer3_pin_port &= ~(timer3_pin_mask);  // keep pin low after stop
   }
 }
@@ -490,7 +493,7 @@ ISR(TIMER4_COMPA_vect)
   }
   else
   {
-    TIMSK4 = 0;   // disable the interrupt
+    disableTimer(4);
     *timer4_pin_port &= ~(timer4_pin_mask);  // keep pin low after stop
   }
 }
@@ -507,7 +510,7 @@ ISR(TIMER5_COMPA_vect)
   }
   else
   {
-    TIMSK5 = 0;   // disable the interrupt
+    disableTimer(5);
     *timer5_pin_port &= ~(timer5_pin_mask);  // keep pin low after stop
   }
 }