aboutsummaryrefslogtreecommitdiff
path: root/bootloaders/optiboot/optiboot_pro_20mhz.lst
diff options
context:
space:
mode:
Diffstat (limited to 'bootloaders/optiboot/optiboot_pro_20mhz.lst')
-rw-r--r--bootloaders/optiboot/optiboot_pro_20mhz.lst571
1 files changed, 0 insertions, 571 deletions
diff --git a/bootloaders/optiboot/optiboot_pro_20mhz.lst b/bootloaders/optiboot/optiboot_pro_20mhz.lst
deleted file mode 100644
index 8314647..0000000
--- a/bootloaders/optiboot/optiboot_pro_20mhz.lst
+++ /dev/null
@@ -1,571 +0,0 @@
-
-optiboot_pro_20mhz.elf: file format elf32-avr
-
-Sections:
-Idx Name Size VMA LMA File off Algn
- 0 .text 000001e2 00003e00 00003e00 00000054 2**1
- CONTENTS, ALLOC, LOAD, READONLY, CODE
- 1 .version 00000002 00003ffe 00003ffe 00000236 2**0
- CONTENTS, READONLY
- 2 .debug_aranges 00000028 00000000 00000000 00000238 2**0
- CONTENTS, READONLY, DEBUGGING
- 3 .debug_pubnames 0000005f 00000000 00000000 00000260 2**0
- CONTENTS, READONLY, DEBUGGING
- 4 .debug_info 0000028e 00000000 00000000 000002bf 2**0
- CONTENTS, READONLY, DEBUGGING
- 5 .debug_abbrev 00000171 00000000 00000000 0000054d 2**0
- CONTENTS, READONLY, DEBUGGING
- 6 .debug_line 0000045e 00000000 00000000 000006be 2**0
- CONTENTS, READONLY, DEBUGGING
- 7 .debug_frame 00000080 00000000 00000000 00000b1c 2**2
- CONTENTS, READONLY, DEBUGGING
- 8 .debug_str 00000149 00000000 00000000 00000b9c 2**0
- CONTENTS, READONLY, DEBUGGING
- 9 .debug_loc 0000027e 00000000 00000000 00000ce5 2**0
- CONTENTS, READONLY, DEBUGGING
- 10 .debug_ranges 00000060 00000000 00000000 00000f63 2**0
- CONTENTS, READONLY, DEBUGGING
-
-Disassembly of section .text:
-
-00003e00 <main>:
-#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
-#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
-#endif
-
-/* main program starts here */
-int main(void) {
- 3e00: 11 24 eor r1, r1
-#ifdef __AVR_ATmega8__
- SP=RAMEND; // This is done by hardware reset
-#endif
-
- // Adaboot no-wait mod
- ch = MCUSR;
- 3e02: 84 b7 in r24, 0x34 ; 52
- MCUSR = 0;
- 3e04: 14 be out 0x34, r1 ; 52
- if (!(ch & _BV(EXTRF))) appStart();
- 3e06: 81 ff sbrs r24, 1
- 3e08: e7 d0 rcall .+462 ; 0x3fd8 <appStart>
-
-#if LED_START_FLASHES > 0
- // Set up Timer 1 for timeout counter
- TCCR1B = _BV(CS12) | _BV(CS10); // div 1024
- 3e0a: 85 e0 ldi r24, 0x05 ; 5
- 3e0c: 80 93 81 00 sts 0x0081, r24
- UCSRA = _BV(U2X); //Double speed mode USART
- UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx
- UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1
- UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
-#else
- UCSR0A = _BV(U2X0); //Double speed mode USART0
- 3e10: 82 e0 ldi r24, 0x02 ; 2
- 3e12: 80 93 c0 00 sts 0x00C0, r24
- UCSR0B = _BV(RXEN0) | _BV(TXEN0);
- 3e16: 88 e1 ldi r24, 0x18 ; 24
- 3e18: 80 93 c1 00 sts 0x00C1, r24
- UCSR0C = _BV(UCSZ00) | _BV(UCSZ01);
- 3e1c: 86 e0 ldi r24, 0x06 ; 6
- 3e1e: 80 93 c2 00 sts 0x00C2, r24
- UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 );
- 3e22: 85 e1 ldi r24, 0x15 ; 21
- 3e24: 80 93 c4 00 sts 0x00C4, r24
-#endif
-#endif
-
- // Set up watchdog to trigger after 500ms
- watchdogConfig(WATCHDOG_1S);
- 3e28: 8e e0 ldi r24, 0x0E ; 14
- 3e2a: c0 d0 rcall .+384 ; 0x3fac <watchdogConfig>
-
- /* Set LED pin as output */
- LED_DDR |= _BV(LED);
- 3e2c: 25 9a sbi 0x04, 5 ; 4
- 3e2e: 86 e0 ldi r24, 0x06 ; 6
-}
-
-#if LED_START_FLASHES > 0
-void flash_led(uint8_t count) {
- do {
- TCNT1 = -(F_CPU/(1024*16));
- 3e30: 2c e3 ldi r18, 0x3C ; 60
- 3e32: 3b ef ldi r19, 0xFB ; 251
- TIFR1 = _BV(TOV1);
- 3e34: 91 e0 ldi r25, 0x01 ; 1
-}
-
-#if LED_START_FLASHES > 0
-void flash_led(uint8_t count) {
- do {
- TCNT1 = -(F_CPU/(1024*16));
- 3e36: 30 93 85 00 sts 0x0085, r19
- 3e3a: 20 93 84 00 sts 0x0084, r18
- TIFR1 = _BV(TOV1);
- 3e3e: 96 bb out 0x16, r25 ; 22
- while(!(TIFR1 & _BV(TOV1)));
- 3e40: b0 9b sbis 0x16, 0 ; 22
- 3e42: fe cf rjmp .-4 ; 0x3e40 <main+0x40>
-#ifdef __AVR_ATmega8__
- LED_PORT ^= _BV(LED);
-#else
- LED_PIN |= _BV(LED);
- 3e44: 1d 9a sbi 0x03, 5 ; 3
-}
-#endif
-
-// Watchdog functions. These are only safe with interrupts turned off.
-void watchdogReset() {
- __asm__ __volatile__ (
- 3e46: a8 95 wdr
- LED_PORT ^= _BV(LED);
-#else
- LED_PIN |= _BV(LED);
-#endif
- watchdogReset();
- } while (--count);
- 3e48: 81 50 subi r24, 0x01 ; 1
- 3e4a: a9 f7 brne .-22 ; 0x3e36 <main+0x36>
- /* get character from UART */
- ch = getch();
-
- if(ch == STK_GET_PARAMETER) {
- // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
- getNch(1);
- 3e4c: 99 24 eor r9, r9
- 3e4e: 93 94 inc r9
- __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
- addrPtr += 2;
- } while (--ch);
-
- // Write from programming buffer
- __boot_page_write_short((uint16_t)(void*)address);
- 3e50: a5 e0 ldi r26, 0x05 ; 5
- 3e52: aa 2e mov r10, r26
- boot_spm_busy_wait();
-
-#if defined(RWWSRE)
- // Reenable read access to flash
- boot_rww_enable();
- 3e54: f1 e1 ldi r31, 0x11 ; 17
- 3e56: bf 2e mov r11, r31
-#endif
-
- /* Forever loop */
- for (;;) {
- /* get character from UART */
- ch = getch();
- 3e58: 9d d0 rcall .+314 ; 0x3f94 <getch>
-
- if(ch == STK_GET_PARAMETER) {
- 3e5a: 81 34 cpi r24, 0x41 ; 65
- 3e5c: 21 f4 brne .+8 ; 0x3e66 <main+0x66>
- // GET PARAMETER returns a generic 0x03 reply - enough to keep Avrdude happy
- getNch(1);
- 3e5e: 81 e0 ldi r24, 0x01 ; 1
- 3e60: b3 d0 rcall .+358 ; 0x3fc8 <getNch>
- putch(0x03);
- 3e62: 83 e0 ldi r24, 0x03 ; 3
- 3e64: 1f c0 rjmp .+62 ; 0x3ea4 <main+0xa4>
- }
- else if(ch == STK_SET_DEVICE) {
- 3e66: 82 34 cpi r24, 0x42 ; 66
- 3e68: 11 f4 brne .+4 ; 0x3e6e <main+0x6e>
- // SET DEVICE is ignored
- getNch(20);
- 3e6a: 84 e1 ldi r24, 0x14 ; 20
- 3e6c: 03 c0 rjmp .+6 ; 0x3e74 <main+0x74>
- }
- else if(ch == STK_SET_DEVICE_EXT) {
- 3e6e: 85 34 cpi r24, 0x45 ; 69
- 3e70: 19 f4 brne .+6 ; 0x3e78 <main+0x78>
- // SET DEVICE EXT is ignored
- getNch(5);
- 3e72: 85 e0 ldi r24, 0x05 ; 5
- 3e74: a9 d0 rcall .+338 ; 0x3fc8 <getNch>
- 3e76: 83 c0 rjmp .+262 ; 0x3f7e <main+0x17e>
- }
- else if(ch == STK_LOAD_ADDRESS) {
- 3e78: 85 35 cpi r24, 0x55 ; 85
- 3e7a: 79 f4 brne .+30 ; 0x3e9a <main+0x9a>
- // LOAD ADDRESS
- uint16_t newAddress;
- newAddress = getch();
- 3e7c: 8b d0 rcall .+278 ; 0x3f94 <getch>
- newAddress = (newAddress & 0xff) | (getch() << 8);
- 3e7e: e8 2e mov r14, r24
- 3e80: ff 24 eor r15, r15
- 3e82: 88 d0 rcall .+272 ; 0x3f94 <getch>
- 3e84: 08 2f mov r16, r24
- 3e86: 10 e0 ldi r17, 0x00 ; 0
- 3e88: 10 2f mov r17, r16
- 3e8a: 00 27 eor r16, r16
- 3e8c: 0e 29 or r16, r14
- 3e8e: 1f 29 or r17, r15
-#ifdef RAMPZ
- // Transfer top bit to RAMPZ
- RAMPZ = (newAddress & 0x8000) ? 1 : 0;
-#endif
- newAddress += newAddress; // Convert from word address to byte address
- 3e90: 00 0f add r16, r16
- 3e92: 11 1f adc r17, r17
- address = newAddress;
- verifySpace();
- 3e94: 91 d0 rcall .+290 ; 0x3fb8 <verifySpace>
- 3e96: 68 01 movw r12, r16
- 3e98: 72 c0 rjmp .+228 ; 0x3f7e <main+0x17e>
- }
- else if(ch == STK_UNIVERSAL) {
- 3e9a: 86 35 cpi r24, 0x56 ; 86
- 3e9c: 29 f4 brne .+10 ; 0x3ea8 <main+0xa8>
- // UNIVERSAL command is ignored
- getNch(4);
- 3e9e: 84 e0 ldi r24, 0x04 ; 4
- 3ea0: 93 d0 rcall .+294 ; 0x3fc8 <getNch>
- putch(0x00);
- 3ea2: 80 e0 ldi r24, 0x00 ; 0
- 3ea4: 6f d0 rcall .+222 ; 0x3f84 <putch>
- 3ea6: 6b c0 rjmp .+214 ; 0x3f7e <main+0x17e>
- }
- /* Write memory, length is big endian and is in bytes */
- else if(ch == STK_PROG_PAGE) {
- 3ea8: 84 36 cpi r24, 0x64 ; 100
- 3eaa: 09 f0 breq .+2 ; 0x3eae <main+0xae>
- 3eac: 42 c0 rjmp .+132 ; 0x3f32 <main+0x132>
- // PROGRAM PAGE - we support flash programming only, not EEPROM
- uint8_t *bufPtr;
- uint16_t addrPtr;
-
- getch(); /* getlen() */
- 3eae: 72 d0 rcall .+228 ; 0x3f94 <getch>
- length = getch();
- 3eb0: 71 d0 rcall .+226 ; 0x3f94 <getch>
- 3eb2: 08 2f mov r16, r24
- getch();
- 3eb4: 6f d0 rcall .+222 ; 0x3f94 <getch>
-
- // If we are in RWW section, immediately start page erase
- if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
- 3eb6: 80 e0 ldi r24, 0x00 ; 0
- 3eb8: c8 16 cp r12, r24
- 3eba: 88 e3 ldi r24, 0x38 ; 56
- 3ebc: d8 06 cpc r13, r24
- 3ebe: 20 f4 brcc .+8 ; 0x3ec8 <main+0xc8>
- 3ec0: 83 e0 ldi r24, 0x03 ; 3
- 3ec2: f6 01 movw r30, r12
- 3ec4: 87 bf out 0x37, r24 ; 55
- 3ec6: e8 95 spm
- 3ec8: c0 e0 ldi r28, 0x00 ; 0
- 3eca: d1 e0 ldi r29, 0x01 ; 1
-
- // While that is going on, read in page contents
- bufPtr = buff;
- do *bufPtr++ = getch();
- 3ecc: 63 d0 rcall .+198 ; 0x3f94 <getch>
- 3ece: 89 93 st Y+, r24
- while (--length);
- 3ed0: 0c 17 cp r16, r28
- 3ed2: e1 f7 brne .-8 ; 0x3ecc <main+0xcc>
-
- // If we are in NRWW section, page erase has to be delayed until now.
- // Todo: Take RAMPZ into account
- if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address);
- 3ed4: f0 e0 ldi r31, 0x00 ; 0
- 3ed6: cf 16 cp r12, r31
- 3ed8: f8 e3 ldi r31, 0x38 ; 56
- 3eda: df 06 cpc r13, r31
- 3edc: 20 f0 brcs .+8 ; 0x3ee6 <main+0xe6>
- 3ede: 83 e0 ldi r24, 0x03 ; 3
- 3ee0: f6 01 movw r30, r12
- 3ee2: 87 bf out 0x37, r24 ; 55
- 3ee4: e8 95 spm
-
- // Read command terminator, start reply
- verifySpace();
- 3ee6: 68 d0 rcall .+208 ; 0x3fb8 <verifySpace>
-
- // If only a partial page is to be programmed, the erase might not be complete.
- // So check that here
- boot_spm_busy_wait();
- 3ee8: 07 b6 in r0, 0x37 ; 55
- 3eea: 00 fc sbrc r0, 0
- 3eec: fd cf rjmp .-6 ; 0x3ee8 <main+0xe8>
- 3eee: a6 01 movw r20, r12
- 3ef0: a0 e0 ldi r26, 0x00 ; 0
- 3ef2: b1 e0 ldi r27, 0x01 ; 1
- bufPtr = buff;
- addrPtr = (uint16_t)(void*)address;
- ch = SPM_PAGESIZE / 2;
- do {
- uint16_t a;
- a = *bufPtr++;
- 3ef4: 2c 91 ld r18, X
- 3ef6: 30 e0 ldi r19, 0x00 ; 0
- a |= (*bufPtr++) << 8;
- 3ef8: 11 96 adiw r26, 0x01 ; 1
- 3efa: 8c 91 ld r24, X
- 3efc: 11 97 sbiw r26, 0x01 ; 1
- 3efe: 90 e0 ldi r25, 0x00 ; 0
- 3f00: 98 2f mov r25, r24
- 3f02: 88 27 eor r24, r24
- 3f04: 82 2b or r24, r18
- 3f06: 93 2b or r25, r19
-#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
-#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
-#endif
-
-/* main program starts here */
-int main(void) {
- 3f08: 12 96 adiw r26, 0x02 ; 2
- ch = SPM_PAGESIZE / 2;
- do {
- uint16_t a;
- a = *bufPtr++;
- a |= (*bufPtr++) << 8;
- __boot_page_fill_short((uint16_t)(void*)addrPtr,a);
- 3f0a: fa 01 movw r30, r20
- 3f0c: 0c 01 movw r0, r24
- 3f0e: 97 be out 0x37, r9 ; 55
- 3f10: e8 95 spm
- 3f12: 11 24 eor r1, r1
- addrPtr += 2;
- 3f14: 4e 5f subi r20, 0xFE ; 254
- 3f16: 5f 4f sbci r21, 0xFF ; 255
- } while (--ch);
- 3f18: f1 e0 ldi r31, 0x01 ; 1
- 3f1a: a0 38 cpi r26, 0x80 ; 128
- 3f1c: bf 07 cpc r27, r31
- 3f1e: 51 f7 brne .-44 ; 0x3ef4 <main+0xf4>
-
- // Write from programming buffer
- __boot_page_write_short((uint16_t)(void*)address);
- 3f20: f6 01 movw r30, r12
- 3f22: a7 be out 0x37, r10 ; 55
- 3f24: e8 95 spm
- boot_spm_busy_wait();
- 3f26: 07 b6 in r0, 0x37 ; 55
- 3f28: 00 fc sbrc r0, 0
- 3f2a: fd cf rjmp .-6 ; 0x3f26 <main+0x126>
-
-#if defined(RWWSRE)
- // Reenable read access to flash
- boot_rww_enable();
- 3f2c: b7 be out 0x37, r11 ; 55
- 3f2e: e8 95 spm
- 3f30: 26 c0 rjmp .+76 ; 0x3f7e <main+0x17e>
-#endif
-
- }
- /* Read memory block mode, length is big endian. */
- else if(ch == STK_READ_PAGE) {
- 3f32: 84 37 cpi r24, 0x74 ; 116
- 3f34: b1 f4 brne .+44 ; 0x3f62 <main+0x162>
- // READ PAGE - we only read flash
- getch(); /* getlen() */
- 3f36: 2e d0 rcall .+92 ; 0x3f94 <getch>
- length = getch();
- 3f38: 2d d0 rcall .+90 ; 0x3f94 <getch>
- 3f3a: f8 2e mov r15, r24
- getch();
- 3f3c: 2b d0 rcall .+86 ; 0x3f94 <getch>
-
- verifySpace();
- 3f3e: 3c d0 rcall .+120 ; 0x3fb8 <verifySpace>
- 3f40: f6 01 movw r30, r12
- 3f42: ef 2c mov r14, r15
- putch(result);
- address++;
- }
- while (--length);
-#else
- do putch(pgm_read_byte_near(address++));
- 3f44: 8f 01 movw r16, r30
- 3f46: 0f 5f subi r16, 0xFF ; 255
- 3f48: 1f 4f sbci r17, 0xFF ; 255
- 3f4a: 84 91 lpm r24, Z+
- 3f4c: 1b d0 rcall .+54 ; 0x3f84 <putch>
- while (--length);
- 3f4e: ea 94 dec r14
- 3f50: f8 01 movw r30, r16
- 3f52: c1 f7 brne .-16 ; 0x3f44 <main+0x144>
-#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4))
-#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6))
-#endif
-
-/* main program starts here */
-int main(void) {
- 3f54: 08 94 sec
- 3f56: c1 1c adc r12, r1
- 3f58: d1 1c adc r13, r1
- 3f5a: fa 94 dec r15
- 3f5c: cf 0c add r12, r15
- 3f5e: d1 1c adc r13, r1
- 3f60: 0e c0 rjmp .+28 ; 0x3f7e <main+0x17e>
-#endif
-#endif
- }
-
- /* Get device signature bytes */
- else if(ch == STK_READ_SIGN) {
- 3f62: 85 37 cpi r24, 0x75 ; 117
- 3f64: 39 f4 brne .+14 ; 0x3f74 <main+0x174>
- // READ SIGN - return what Avrdude wants to hear
- verifySpace();
- 3f66: 28 d0 rcall .+80 ; 0x3fb8 <verifySpace>
- putch(SIGNATURE_0);
- 3f68: 8e e1 ldi r24, 0x1E ; 30
- 3f6a: 0c d0 rcall .+24 ; 0x3f84 <putch>
- putch(SIGNATURE_1);
- 3f6c: 84 e9 ldi r24, 0x94 ; 148
- 3f6e: 0a d0 rcall .+20 ; 0x3f84 <putch>
- putch(SIGNATURE_2);
- 3f70: 86 e0 ldi r24, 0x06 ; 6
- 3f72: 98 cf rjmp .-208 ; 0x3ea4 <main+0xa4>
- }
- else if (ch == 'Q') {
- 3f74: 81 35 cpi r24, 0x51 ; 81
- 3f76: 11 f4 brne .+4 ; 0x3f7c <main+0x17c>
- // Adaboot no-wait mod
- watchdogConfig(WATCHDOG_16MS);
- 3f78: 88 e0 ldi r24, 0x08 ; 8
- 3f7a: 18 d0 rcall .+48 ; 0x3fac <watchdogConfig>
- verifySpace();
- }
- else {
- // This covers the response to commands like STK_ENTER_PROGMODE
- verifySpace();
- 3f7c: 1d d0 rcall .+58 ; 0x3fb8 <verifySpace>
- }
- putch(STK_OK);
- 3f7e: 80 e1 ldi r24, 0x10 ; 16
- 3f80: 01 d0 rcall .+2 ; 0x3f84 <putch>
- 3f82: 6a cf rjmp .-300 ; 0x3e58 <main+0x58>
-
-00003f84 <putch>:
- }
-}
-
-void putch(char ch) {
- 3f84: 98 2f mov r25, r24
-#ifndef SOFT_UART
- while (!(UCSR0A & _BV(UDRE0)));
- 3f86: 80 91 c0 00 lds r24, 0x00C0
- 3f8a: 85 ff sbrs r24, 5
- 3f8c: fc cf rjmp .-8 ; 0x3f86 <putch+0x2>
- UDR0 = ch;
- 3f8e: 90 93 c6 00 sts 0x00C6, r25
- [uartBit] "I" (UART_TX_BIT)
- :
- "r25"
- );
-#endif
-}
- 3f92: 08 95 ret
-
-00003f94 <getch>:
- [uartBit] "I" (UART_RX_BIT)
- :
- "r25"
-);
-#else
- while(!(UCSR0A & _BV(RXC0)))
- 3f94: 80 91 c0 00 lds r24, 0x00C0
- 3f98: 87 ff sbrs r24, 7
- 3f9a: fc cf rjmp .-8 ; 0x3f94 <getch>
- ;
- if (!(UCSR0A & _BV(FE0))) {
- 3f9c: 80 91 c0 00 lds r24, 0x00C0
- 3fa0: 84 fd sbrc r24, 4
- 3fa2: 01 c0 rjmp .+2 ; 0x3fa6 <getch+0x12>
-}
-#endif
-
-// Watchdog functions. These are only safe with interrupts turned off.
-void watchdogReset() {
- __asm__ __volatile__ (
- 3fa4: a8 95 wdr
- * don't care that an invalid char is returned...)
- */
- watchdogReset();
- }
-
- ch = UDR0;
- 3fa6: 80 91 c6 00 lds r24, 0x00C6
- LED_PIN |= _BV(LED);
-#endif
-#endif
-
- return ch;
-}
- 3faa: 08 95 ret
-
-00003fac <watchdogConfig>:
- "wdr\n"
- );
-}
-
-void watchdogConfig(uint8_t x) {
- WDTCSR = _BV(WDCE) | _BV(WDE);
- 3fac: e0 e6 ldi r30, 0x60 ; 96
- 3fae: f0 e0 ldi r31, 0x00 ; 0
- 3fb0: 98 e1 ldi r25, 0x18 ; 24
- 3fb2: 90 83 st Z, r25
- WDTCSR = x;
- 3fb4: 80 83 st Z, r24
-}
- 3fb6: 08 95 ret
-
-00003fb8 <verifySpace>:
- do getch(); while (--count);
- verifySpace();
-}
-
-void verifySpace() {
- if (getch() != CRC_EOP) {
- 3fb8: ed df rcall .-38 ; 0x3f94 <getch>
- 3fba: 80 32 cpi r24, 0x20 ; 32
- 3fbc: 19 f0 breq .+6 ; 0x3fc4 <verifySpace+0xc>
- watchdogConfig(WATCHDOG_16MS); // shorten WD timeout
- 3fbe: 88 e0 ldi r24, 0x08 ; 8
- 3fc0: f5 df rcall .-22 ; 0x3fac <watchdogConfig>
- 3fc2: ff cf rjmp .-2 ; 0x3fc2 <verifySpace+0xa>
- while (1) // and busy-loop so that WD causes
- ; // a reset and app start.
- }
- putch(STK_INSYNC);
- 3fc4: 84 e1 ldi r24, 0x14 ; 20
-}
- 3fc6: de cf rjmp .-68 ; 0x3f84 <putch>
-
-00003fc8 <getNch>:
- ::[count] "M" (UART_B_VALUE)
- );
-}
-#endif
-
-void getNch(uint8_t count) {
- 3fc8: 1f 93 push r17
- 3fca: 18 2f mov r17, r24
- do getch(); while (--count);
- 3fcc: e3 df rcall .-58 ; 0x3f94 <getch>
- 3fce: 11 50 subi r17, 0x01 ; 1
- 3fd0: e9 f7 brne .-6 ; 0x3fcc <getNch+0x4>
- verifySpace();
- 3fd2: f2 df rcall .-28 ; 0x3fb8 <verifySpace>
-}
- 3fd4: 1f 91 pop r17
- 3fd6: 08 95 ret
-
-00003fd8 <appStart>:
- WDTCSR = _BV(WDCE) | _BV(WDE);
- WDTCSR = x;
-}
-
-void appStart() {
- watchdogConfig(WATCHDOG_OFF);
- 3fd8: 80 e0 ldi r24, 0x00 ; 0
- 3fda: e8 df rcall .-48 ; 0x3fac <watchdogConfig>
- __asm__ __volatile__ (
- 3fdc: ee 27 eor r30, r30
- 3fde: ff 27 eor r31, r31
- 3fe0: 09 94 ijmp
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-22 19:21:48 +0000