diff options
Diffstat (limited to 'bootloaders/optiboot/Makefile')
| -rw-r--r-- | bootloaders/optiboot/Makefile | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/bootloaders/optiboot/Makefile b/bootloaders/optiboot/Makefile index 88cb9a2..ce25ac3 100644 --- a/bootloaders/optiboot/Makefile +++ b/bootloaders/optiboot/Makefile @@ -36,7 +36,7 @@ ISPPORT = usb ISPSPEED = -b 115200 MCU_TARGET = atmega168 -LDSECTION = --section-start=.text=0x3e00 +LDSECTIONS = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe # Build environments # Start of some ugly makefile-isms to allow optiboot to be built @@ -88,7 +88,7 @@ endif # http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ # # similarly, the lock bits should be 0xff instead of 0x3f (to -# unlock the bootloader section) and 0xcf instead of 0x0f (to +# unlock the bootloader section) and 0xcf instead of 0x2f (to # lock it), but since the high two bits of the lock byte are # unused, avrdude would get confused. @@ -98,7 +98,7 @@ ISPFUSES = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m ISPFLASH = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ - -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ @@ -116,7 +116,7 @@ CC = $(GCCROOT)avr-gcc # Override is only needed by avr-lib build system. override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) -override LDFLAGS = -Wl,$(LDSECTION) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib +override LDFLAGS = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib OBJCOPY = $(GCCROOT)avr-objcopy OBJDUMP = $(call fixpath,$(GCCROOT)avr-objdump) @@ -129,7 +129,7 @@ virboot328: TARGET = atmega328 virboot328: MCU_TARGET = atmega328p virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT' virboot328: AVR_FREQ = 16000000L -virboot328: LDSECTION = --section-start=.text=0x7e00 +virboot328: LDSECTIONS = --section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe virboot328: $(PROGRAM)_atmega328.hex virboot328: $(PROGRAM)_atmega328.lst @@ -200,7 +200,7 @@ atmega328: TARGET = atmega328 atmega328: MCU_TARGET = atmega328p atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' atmega328: AVR_FREQ = 16000000L -atmega328: LDSECTION = --section-start=.text=0x7e00 +atmega328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe atmega328: $(PROGRAM)_atmega328.hex atmega328: $(PROGRAM)_atmega328.lst @@ -262,7 +262,7 @@ atmega8: TARGET = atmega8 atmega8: MCU_TARGET = atmega8 atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' atmega8: AVR_FREQ = 16000000L -atmega8: LDSECTION = --section-start=.text=0x1e00 +atmega8: LDSECTIONS = --section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe atmega8: $(PROGRAM)_atmega8.hex atmega8: $(PROGRAM)_atmega8.lst @@ -281,7 +281,7 @@ atmega88: TARGET = atmega88 atmega88: MCU_TARGET = atmega88 atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' atmega88: AVR_FREQ = 16000000L -atmega88: LDSECTION = --section-start=.text=0x1e00 +atmega88: LDSECTIONS = --section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe atmega88: $(PROGRAM)_atmega88.hex atmega88: $(PROGRAM)_atmega88.lst @@ -357,7 +357,7 @@ atmega328_pro8: TARGET = atmega328_pro_8MHz atmega328_pro8: MCU_TARGET = atmega328p atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' atmega328_pro8: AVR_FREQ = 8000000L -atmega328_pro8: LDSECTION = --section-start=.text=0x7e00 +atmega328_pro8: LDSECTIONS = --section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst @@ -382,7 +382,7 @@ luminet: MCU_TARGET = attiny84 luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600' luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION' luminet: AVR_FREQ = 1000000L -luminet: LDSECTION = --section-start=.text=0x1d00 +luminet: LDSECTIONS = --section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe luminet: $(PROGRAM)_luminet.hex luminet: $(PROGRAM)_luminet.lst @@ -421,10 +421,10 @@ clean: $(OBJDUMP) -h -S $< > $@ %.hex: %.elf - $(OBJCOPY) -j .text -j .data -O ihex $< $@ + $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@ %.srec: %.elf - $(OBJCOPY) -j .text -j .data -O srec $< $@ + $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@ %.bin: %.elf - $(OBJCOPY) -j .text -j .data -O binary $< $@ + $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@ |