diff options
62 files changed, 3524 insertions, 1615 deletions
@@ -7,14 +7,22 @@ uno.upload.tool=avrdude uno.upload.protocol=arduino uno.upload.maximum_size=32256 uno.upload.speed=115200 + uno.bootloader.tool=avrdude -uno.bootloader.erase.params=-e -Ulock:w:0x3F:m -Uefuse:w:0x05:m -Uhfuse:w:0xde:m -Ulfuse:w:0xff:m -uno.bootloader.write.params=-Uflash:w:{bootloader.file}:i -Ulock:w:0x0F:m +uno.bootloader.low_fuses=0xFF +uno.bootloader.high_fuses=0xDE +uno.bootloader.extended_fuses=0x05 +uno.bootloader.unlock_bits=0x3F +uno.bootloader.lock_bits=0x0F +uno.bootloader.erase.params=-e -Ulock:w:{bootloader.unlock_bits}:m -Uefuse:w:{bootloader.extended_fuses}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m +uno.bootloader.write.params=-Uflash:w:{bootloader.file}:i -Ulock:w:{bootloader.lock_bits}:m uno.bootloader.file={runtime.ide.path}/hardware/arduino/avr/optiboot/optiboot_atmega328.hex + uno.build.mcu=atmega328p uno.build.f_cpu=16000000L uno.build.core=arduino uno.build.variant=standard +uno.build.extra_flags= ############################################################## @@ -162,6 +170,7 @@ leonardo.build.vid=0x2341 leonardo.build.pid=0x8036 leonardo.build.core=arduino leonardo.build.variant=leonardo +leonardo.build.extra_flags=-DUSB_VID={build.vid} -DDUSB_PID={build.pid} ############################################################## diff --git a/bootloaders/caterina/Caterina-Leonardo.hex b/bootloaders/caterina/Caterina-Leonardo.hex new file mode 100644 index 0000000..de7b53c --- /dev/null +++ b/bootloaders/caterina/Caterina-Leonardo.hex @@ -0,0 +1,1024 @@ +:200000000C946E010C9496010C9496010C9496010C9496010C9496010C9496010C94960150 +:200020000C9496010C9496010C9410050C949B050C9496010C9496010C9496010C94960181 +:200040000C9496010C9496010C9496010C9496010C9496010C9496010C9496010C94B501C9 +:200060000C9496010C9496010C9496010C9496010C9496010C9496010C9496010C949601C8 +:200080000C9496010C9496010C9496010C9496010C9496010C9496010C9496010C949601A8 +:2000A0000C9496010C9496010C94960100000000240027002A002D003000000000002500A4 +:2000C00028002B002E003100000000002300260029002C002F00040404040403040502027D +:2000E0000202040302020202060606060606040402020204040802011040804010204080A8 +:200100004080080204018040201002011080102040400000000200080E0000030401000BB2 +:200120000000070605040100080A0B0C0D09040309042203410072006400750069006E00CD +:200140006F0020004C0065006F006E006100720064006F00180341007200640075006900CC +:200160006E006F0020004C004C004300120100020000004041233680000101020001120120 +:200180000002020000404123368000010102000100C18081C1080B00020202010009040052 +:2001A000000102020000052400100105240101010424020605240600010705810310004094 +:2001C00009040100020A000000070502024000000705830240000005010902A1010901A186 +:2001E000008501050919012903150025019503750181029501750581030501093009310943 +:20020000381581257F750895038106C0C005010906A1018502050719E029E715002501754D +:20022000019508810295017508810395067508150025650507190029658100C0090402004C +:2002400001030000000921010100012265000705840340000100000000000000002A2B2895 +:200260000000000000000000000000000000000000000000002C9EB4A0A1A2A434A6A7A553 +:20028000AE362D3738271E1F20212223242526B333B62EB7B89F8485868788898A8B8C8D58 +:2002A0008E8F909192939495969798999A9B9C9D2F3130A3AD350405060708090A0B0C0D7C +:2002C0000E0F101112131415161718191A1B1C1DAFB1B0B500004C042E072C0811241FBE36 +:2002E000CFEFDAE0DEBFCDBF11E0A0E0B1E0EEECF2E102C005900D92AC32B107D9F711E061 +:20030000ACE2B1E001C01D92AD39B107E1F712E0CCEDD2E004C02297FE010E946109C63DF0 +:20032000D107C9F70E9486030C9465090C9400008091000161E00E94530364E873E080E002 +:2003400090E00E94FD018091000160E00E9453036CE474E080E090E00E94FD010895809181 +:20036000000161E00E94B60208951F920F920FB60F9211242F933F938F939F93AF93BF93DB +:200380008091300190913101A0913201B0913301309134010196A11DB11D232F2D5F2D3794 +:2003A00020F02D570196A11DB11D209334018093300190933101A0933201B0933301809117 +:2003C0002C0190912D01A0912E01B0912F010196A11DB11D80932C0190932D01A0932E01BA +:2003E000B0932F01BF91AF919F918F913F912F910F900FBE0F901F9018959B01AC017FB734 +:20040000F89480912C0190912D01A0912E01B0912F0166B5A89B05C06F3F19F00196A11DC3 +:20042000B11D7FBFBA2FA92F982F8827860F911DA11DB11D62E0880F991FAA1FBB1F6A9577 +:20044000D1F7BC012DC0FFB7F89480912C0190912D01A0912E01B0912F01E6B5A89B05C0E7 +:20046000EF3F19F00196A11DB11DFFBFBA2FA92F982F88278E0F911DA11DB11DE2E0880FFD +:20048000991FAA1FBB1FEA95D1F7861B970B885E9340C8F2215030404040504068517C4F8F +:2004A000211531054105510571F60895789484B5826084BD84B5816084BD85B5826085BD0F +:2004C00085B5816085BDEEE6F0E0808181608083E1E8F0E010828081826080838081816043 +:2004E0008083E0E8F0E0808181608083E1EBF0E0808184608083E0EBF0E080818160808378 +:20050000E1E9F0E0808182608083808181608083E0E9F0E0808181608083E1ECF0E080815A +:2005200084608083808182608083808181608083E3ECF0E0808181608083E0ECF0E08081E8 +:2005400082608083E2ECF0E0808181608083EAE7F0E08081846080838081826080838081C3 +:20056000816080838081806880830895CF93DF93482F50E0CA018C509F4FFC0134914A52A0 +:200580005F4FFA018491882369F190E0880F991FFC01E455FF4FA591B491FC01E654FF4F55 +:2005A000C591D491662351F42FB7F8948C91932F909589238C93888189230BC0623061F40A +:2005C0002FB7F8948C91932F909589238C938881832B88832FBF06C09FB7F8948C91832BB7 +:2005E0008C939FBFDF91CF9108958730C1F1883080F48330F9F0843030F4813029F182308B +:2006000009F050C024C08430C9F0863009F04AC022C08A3091F18B3030F4883031F1893037 +:2006200009F040C026C08C3091F18C3060F18E30C9F533C0809180008F7703C08091800036 +:200640008F7D80938000089584B58F7702C084B58F7D84BD08958091B0008F7703C080919F +:20066000B0008F7D8093B0000895809190008F7707C0809190008F7D03C080919000877FD9 +:200680008093900008958091C0008F7703C08091C0008F7D8093C00008958091C200877F5A +:2006A0008093C2000895FF920F931F93F62E482F50E0CA018E5E9E4FFC012491CA018C501B +:2006C0009F4FFC0114914A525F4FFA0104910023C9F0222319F0822F0E94F502E02FF0E05D +:2006E000EE0FFF1FE654FF4FA591B4919FB7F894FF2021F48C911095812302C08C91812BD5 +:200700008C939FBF1F910F91FF900895CF93DF930E9456028DE391E00E944D040E94AF01EC +:20072000C0E0D0E00E9498012097E1F30E940000F9CF282F809137018823C1F057FF1AC00D +:2007400015C02898909336018091F1008193E217F307B9F74115510539F08091F20088236E +:2007600019F48BE68093E800AFBF02C04FEF5FEFCA010895AFB7F89427702093E9008091A6 +:20078000F200282F30E0241735070CF4A901FB019B01240F311D94E6DACFDF93CF930F922E +:2007A000CDB7DEB7BE016F5F7F4F41E050E00E949903019719F02FEF3FEF03C08981282F25 +:2007C00030E0C9010F90CF91DF910895FF920F931F93F82E142F052F40913A0150913B0188 +:2007E000212F302FC901DC01FB016EEF29C0F7FE02C0949101C090812091380130913901CE +:2008000024173507ACF48091E8008570E1F38091E80082FF03C02FEF3FEF17C09093F1008B +:20082000C90101968F739070892B11F46093E8002F5F3F4F3093390120933801119731964D +:200840001097A9F6812F902F9C01C9011F910F91FF9008959C018091E80082FFFCCFF90124 +:20086000260F311D03C08091F1008193E217F307D1F7289884E6809336018BEF8093E80078 +:20088000CB0108958093E9008091F200882319F08AE38093E800089508951092370181E05F +:2008A0008093D70080EA8093D80082E189BD09B400FEFDCF61E070E080E090E00E94FD01C8 +:2008C00080E98093D8008CE08093E2001092E000559A209A08955F926F927F928F929F9246 +:2008E000AF92BF92CF92DF92EF92FF920F931F93CF93DF93E82E842E752E809137018823FB +:2009000071F18B01242F352FC901EC017AEFF72E67E0962E9E2050E4552E8E2D90E040E220 +:20092000A42EB12CA822B9223AE3632E20E4C22ED12CC822D92258C09FB7F8949092E900DA +:200940008091E80085FD02C020E004C08091F200252D281B9FBF222361F4FA9419F42FEF4D +:200960003FEF4DC061E070E080E090E00E94FD013BC0822F90E0C817D9070CF42C2FC21B28 +:20098000D1094FB7F8949092E900A114B10421F406C01092F10021502223D9F719C0E7FCC6 +:2009A00003C0F801922F10C0C801322F06C0FC010196E491E093F10031503323C1F706C038 +:2009C00081918093F10091509923D1F7020F111D8091E80085FF05C0209729F4C114D1049D +:2009E00011F06092E8004FBF209709F0A5CF5D9884E680933501282D372DC9019C01C90158 +:200A0000DF91CF911F910F91FF90EF90DF90CF90BF90AF909F908F907F906F905F90089564 +:200A20001F920F920FB60F9211241F932F933F934F935F936F937F938F939F93AF93BF93B3 +:200A4000EF93FF938091E1001092E100982F83FF0FC01092E90081E08093EB001092EC007D +:200A600082E38093ED001092370188E08093F00092FF36C083E08093E9008091F200882338 +:200A800049F08AE38093E80005C082E891E00E94710701C012E09FB7F8941093E9008091C9 +:200AA000F2009FBF882389F780913501882351F08091350181508093350180913501882335 +:200AC00009F45D9A80913601882351F08091360181508093360180913601882309F4289AD9 +:200AE000FF91EF91BF91AF919F918F917F916F915F914F913F912F911F910F900FBE0F90DB +:200B00001F9018950F931F93DF93CF930F92CDB7DEB719828E010F5F1F4FC8010E9490078F +:200B2000C8010E942909898190E00F90CF91DF911F910F9108951F920F920FB60F92112455 +:200B4000EF92FF921F932F933F934F935F936F937F938F939F93AF93BF93EF93FF93DF93E7 +:200B6000CF93CDB7DEB76197DEBFCDBF1092E9008091E80083FF0FC1FE0131969E01275F18 +:200B80003F4F03C08091F1008193E217F307D1F7289884E68093360182EF8093E800998139 +:200BA00097FF05C08091E80080FFFCCF03C08EEF8093E800292F30E0C90180769070892B80 +:200BC00009F0C2C08A81882329F41092F1001092F100D6C0813009F4D3C0833009F4D0C08A +:200BE000853049F48091E80080FFFCCF8B8180688093E300C5C0863009F07CC01C81EF805A +:200C0000F8841230C1F51092E900109239011092380110923B0110923A010E94820599E0C1 +:200C2000FE013996DF01292F1D922A95E9F799871A8791E09E8790E8988B9AEF998B209110 +:200C4000380130913901275F3F4F3C872B878D871092E9001092390110923801F0923B01C3 +:200C6000E0923A0180E0BF0149E050E00E94E6030E94820585C01092E9001092390110924C +:200C80003801F0923B01E0923A01123241F482E290E00E942109892B09F476C071C011303E +:200CA00079F488E0E816F10419F481E080933C0180913C01882309F06BC0ECE6F1E013C01B +:200CC000133009F061C08B81882319F4EEE2F1E00AC0823019F4E2E3F1E005C0813009F0C4 +:200CE00053C0E4E5F1E0449180E8BF0150E00E94E60346C0873009F447C0883021F481E0A0 +:200D00008093F1003DC08930D9F523703070232BD9F5E1E9F1E091E031E026E39093E900CA +:200D20003093EB0084918093EC002093ED009F5F3196953099F78EE78093EA001092EA0039 +:200D40008B81809337011CC08F8198851092E900109239011092380190933B0180933A0144 +:200D60008D81882329F4CE0101960E949C0706C0823051F4CE0101960E94F207882321F078 +:200D80008EEF8093E80007C081E28093EB0003C0EEE7F1E0A8CF6196DEBFCDBFCF91DF91E3 +:200DA000FF91EF91BF91AF919F918F917F916F915F914F913F912F911F91FF90EF900F9076 +:200DC0000FBE0F901F90189520917E0130917F018091800190918101281B390B2F733070DC +:200DE000C901089520917E0130917F0180918001909181012817390719F42FEF3FEF09C045 +:200E0000E0918001F0918101E25CFE4F8081282F30E0C901089520917E0130917F01809101 +:200E20008001909181012817390719F42FEF3FEF13C0E0918001F0918101E25CFE4F2081C2 +:200E4000809180019091810101968F739070909381018093800130E0C901089510928501EC +:200E60001092840188EE93E0A0E0B0E08093860190938701A0938801B093890180E191E0B2 +:200E8000909383018093820108950F931F93DF93CF930F92CDB7DEB78C0169838091090102 +:200EA000882369F083E0BE016F5F7F4F41E050E00E946B041816190614F49C0107C081E0F4 +:200EC00090E0F8019383828320E030E0C9010F90CF91DF911F910F91089583E00E9442040D +:200EE000089582E00E94CD03482F20917E0130917F012F5F3F4F2F73307080918001909188 +:200F000081012817390759F0E0917E01F0917F01E25CFE4F408330937F0120937E01089536 +:200F2000FC0180818E5F808380E865E971E042E450E00E94E6030895FC0181819081913A63 +:200F400059F4813209F04CC080E062E071E047E050E00E94E60342C0913209F041C0803246 +:200F600039F482E091E067E070E00E942A0436C0823209F035C0828180930901809102013E +:200F800090910301A0910401B0910501805B9440A040B04019F58091090180FD12C087E74A +:200FA00097E790930108809300082BE088E190E00FB6F894A895809360000FBE20936000A7 +:200FC0000DC088E10FB6F89480936000109260000FBEA895109201081092000881E00895B8 +:200FE00080E00895FC0191818081813A31F4913089F080E0933089F40DC0813269F49B3082 +:2010000021F4828180930A0105C09A3029F4828180930B0181E0089580E00895EF92FF92BF +:201020000F931F938C01E62EDC01ED91FC910480F581E02D0995F82ED801ED91FC9106809E +:20104000F781E02DC8016E2D09958F2D90E01F910F91FF90EF900895109290011092940178 +:201060001092930182E291E090939201809391010895EF92FF920F931F93DF93CF930F9292 +:20108000CDB7DEB789838B017A0184E0BE016F5F7F4F41E050E00E946B0484E4B801A7013A +:2010A0000E946B040F90CF91DF911F910F91FF90EF90089582E048E050E00E94390808957B +:2010C000FC0116821782108611861286138614823496BF010E945A080895DC01683810F046 +:2010E000685829C0E62FF0E067FF13C0E058F04081E090E002C0880F991FEA95E2F7809572 +:2011000014962C911497282314962C93149760E012C0EB5AFD4F6491662319F420E030E020 +:201120001DC067FF08C014968C9114978D7F14968C9314976F77FD0190E0662321F08681BD +:20114000861709F416829F5F31969630B1F7CD011496BD010E945A0821E030E0C901089578 +:20116000CF93DF93DC01683810F0685825C0E62FF0E067FF12C0E058F04081E090E002C061 +:20118000880F991FEA95E2F714962C911497282B14962C93149760E00FC0EB5AFD4F64919A +:2011A0006623D9F167FF08C014968C911497826014968C9314976F7716968C9116978617ED +:2011C000A9F117968C911797861781F118968C911897861759F119968C911997861731F152 +:2011E0001A968C911A97861709F11B968C911B978617E1F0ED01E0E0F0E09E2F8E818823E7 +:2012000021F4EA0FFB1F668306C09F5F31962196E630F10591F7963049F481E090E013966A +:201220009C938E93129720E030E007C0CD011496BD010E945A0821E030E0C901DF91CF91F9 +:20124000089580E867ED71E045E650E00E94E6030895FC0180818F5F808380E86CE372E069 +:2012600049E150E00E94E6030895CF92DF92EF92FF920F931F93CF93DF937C016B018A016C +:20128000C0E0D0E00FC0D6016D916D01D701ED91FC910190F081E02DC7010995C80FD91FC5 +:2012A000015010400115110571F7CE01DF91CF911F910F91FF90EF90DF90CF900895EE0F94 +:2012C000FF1F0590F491E02D0994F894FFCF0D0000E1000000000000010100000000450796 +:2012E0003509E4060B07F2066D077107000000000E083509B0086D086008FFFFFFFFFFFFED +:20130000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED +:20132000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD +:20134000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD +:20136000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D +:20138000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D +:2013A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D +:2013C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D +:2013E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D +:20140000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC +:20142000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC +:20144000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC +:20146000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C +:20148000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C +:2014A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C +:2014C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C +:2014E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C +:20150000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB +:20152000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB +:20154000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB +:20156000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B +:20158000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B +:2015A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B +:2015C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B +:2015E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B +:20160000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA +:20162000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA +:20164000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA +:20166000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A +:20168000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A +:2016A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A +:2016C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A +:2016E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A +:20170000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9 +:20172000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9 +:20174000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9 +:20176000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89 +:20178000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69 +:2017A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49 +:2017C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29 +:2017E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09 +:20180000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8 +:20182000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8 +:20184000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8 +:20186000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88 +:20188000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68 +:2018A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48 +:2018C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28 +:2018E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08 +:20190000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7 +:20192000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7 +:20194000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7 +:20196000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87 +:20198000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67 +:2019A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47 +:2019C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27 +:2019E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07 +:201A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6 +:201A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6 +:201A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6 +:201A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86 +:201A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66 +:201AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46 +:201AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26 +:201AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06 +:201B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5 +:201B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5 +:201B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5 +:201B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85 +:201B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65 +:201BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45 +:201BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25 +:201BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05 +:201C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4 +:201C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4 +:201C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4 +:201C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84 +:201C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64 +:201CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44 +:201CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24 +:201CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04 +:201D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3 +:201D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3 +:201D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3 +:201D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83 +:201D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63 +:201DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43 +:201DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23 +:201DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03 +:201E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2 +:201E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2 +:201E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2 +:201E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82 +:201E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62 +:201EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42 +:201EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22 +:201EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02 +:201F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1 +:201F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1 +:201F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1 +:201F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81 +:201F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61 +:201FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41 +:201FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21 +:201FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01 +:20200000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0 +:20202000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0 +:20204000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0 +:20206000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80 +:20208000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60 +:2020A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40 +:2020C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20 +:2020E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00 +:20210000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDF +:20212000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBF +:20214000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9F +:20216000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7F +:20218000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F +:2021A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3F +:2021C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1F +:2021E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF +:20220000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDE +:20222000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBE +:20224000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9E +:20226000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7E +:20228000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5E +:2022A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3E +:2022C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1E +:2022E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE +:20230000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDD +:20232000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD +:20234000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9D +:20236000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7D +:20238000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D +:2023A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3D +:2023C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D +:2023E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD +:20240000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC +:20242000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC +:20244000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C +:20246000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C +:20248000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5C +:2024A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3C +:2024C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1C +:2024E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC +:20250000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDB +:20252000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBB +:20254000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9B +:20256000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7B +:20258000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5B +:2025A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3B +:2025C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1B +:2025E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB +:20260000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDA +:20262000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBA +:20264000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9A +:20266000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7A +:20268000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5A +:2026A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3A +:2026C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A +:2026E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA +:20270000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD9 +:20272000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB9 +:20274000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF99 +:20276000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF79 +:20278000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF59 +:2027A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF39 +:2027C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19 +:2027E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9 +:20280000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD8 +:20282000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8 +:20284000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF98 +:20286000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF78 +:20288000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58 +:2028A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF38 +:2028C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF18 +:2028E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8 +:20290000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7 +:20292000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7 +:20294000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97 +:20296000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77 +:20298000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57 +:2029A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37 +:2029C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17 +:2029E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7 +:202A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6 +:202A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6 +:202A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96 +:202A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF76 +:202A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF56 +:202AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF36 +:202AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16 +:202AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6 +:202B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5 +:202B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5 +:202B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95 +:202B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75 +:202B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55 +:202BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35 +:202BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15 +:202BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5 +:202C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4 +:202C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4 +:202C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94 +:202C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74 +:202C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54 +:202CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34 +:202CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14 +:202CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4 +:202D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3 +:202D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3 +:202D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93 +:202D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73 +:202D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53 +:202DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33 +:202DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13 +:202DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3 +:202E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2 +:202E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2 +:202E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92 +:202E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72 +:202E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52 +:202EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32 +:202EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12 +:202EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2 +:202F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1 +:202F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1 +:202F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91 +:202F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71 +:202F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51 +:202FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31 +:202FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11 +:202FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1 +:20300000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD0 +:20302000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0 +:20304000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF90 +:20306000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF70 +:20308000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50 +:2030A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30 +:2030C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10 +:2030E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0 +:20310000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCF +:20312000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAF +:20314000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8F +:20316000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6F +:20318000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4F +:2031A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2F +:2031C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0F +:2031E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF +:20320000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE +:20322000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE +:20324000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E +:20326000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E +:20328000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E +:2032A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E +:2032C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E +:2032E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE +:20330000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD +:20332000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD +:20334000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D +:20336000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D +:20338000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D +:2033A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D +:2033C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D +:2033E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED +:20340000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC +:20342000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC +:20344000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C +:20346000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C +:20348000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C +:2034A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C +:2034C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C +:2034E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC +:20350000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB +:20352000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB +:20354000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B +:20356000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B +:20358000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B +:2035A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B +:2035C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B +:2035E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB +:20360000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA +:20362000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA +:20364000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A +:20366000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A +:20368000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A +:2036A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A +:2036C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A +:2036E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA +:20370000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9 +:20372000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9 +:20374000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89 +:20376000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69 +:20378000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49 +:2037A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29 +:2037C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09 +:2037E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9 +:20380000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8 +:20382000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8 +:20384000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88 +:20386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68 +:20388000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48 +:2038A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28 +:2038C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08 +:2038E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8 +:20390000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7 +:20392000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7 +:20394000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87 +:20396000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67 +:20398000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47 +:2039A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27 +:2039C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07 +:2039E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7 +:203A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6 +:203A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6 +:203A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86 +:203A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66 +:203A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46 +:203AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26 +:203AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06 +:203AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6 +:203B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5 +:203B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5 +:203B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85 +:203B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65 +:203B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45 +:203BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25 +:203BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05 +:203BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5 +:203C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4 +:203C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4 +:203C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84 +:203C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64 +:203C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44 +:203CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24 +:203CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04 +:203CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4 +:203D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3 +:203D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3 +:203D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83 +:203D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63 +:203D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43 +:203DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23 +:203DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03 +:203DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3 +:203E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2 +:203E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2 +:203E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82 +:203E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62 +:203E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42 +:203EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22 +:203EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02 +:203EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2 +:203F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1 +:203F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1 +:203F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81 +:203F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61 +:203F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41 +:203FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21 +:203FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01 +:203FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1 +:20400000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0 +:20402000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0 +:20404000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80 +:20406000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60 +:20408000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40 +:2040A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20 +:2040C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00 +:2040E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0 +:20410000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBF +:20412000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9F +:20414000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7F +:20416000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F +:20418000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3F +:2041A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1F +:2041C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF +:2041E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDF +:20420000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBE +:20422000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9E +:20424000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7E +:20426000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5E +:20428000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3E +:2042A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1E +:2042C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE +:2042E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDE +:20430000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD +:20432000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9D +:20434000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7D +:20436000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D +:20438000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3D +:2043A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D +:2043C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD +:2043E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDD +:20440000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC +:20442000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C +:20444000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C +:20446000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5C +:20448000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3C +:2044A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1C +:2044C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC +:2044E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC +:20450000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBB +:20452000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9B +:20454000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7B +:20456000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5B +:20458000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3B +:2045A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1B +:2045C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB +:2045E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDB +:20460000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBA +:20462000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9A +:20464000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7A +:20466000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5A +:20468000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3A +:2046A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A +:2046C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA +:2046E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDA +:20470000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB9 +:20472000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF99 +:20474000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF79 +:20476000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF59 +:20478000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF39 +:2047A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19 +:2047C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9 +:2047E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD9 +:20480000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8 +:20482000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF98 +:20484000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF78 +:20486000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58 +:20488000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF38 +:2048A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF18 +:2048C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8 +:2048E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD8 +:20490000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7 +:20492000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97 +:20494000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77 +:20496000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57 +:20498000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37 +:2049A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17 +:2049C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7 +:2049E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7 +:204A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6 +:204A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96 +:204A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF76 +:204A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF56 +:204A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF36 +:204AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16 +:204AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6 +:204AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6 +:204B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5 +:204B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95 +:204B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75 +:204B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55 +:204B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35 +:204BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15 +:204BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5 +:204BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5 +:204C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4 +:204C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94 +:204C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74 +:204C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54 +:204C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34 +:204CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14 +:204CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4 +:204CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4 +:204D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3 +:204D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93 +:204D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73 +:204D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53 +:204D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33 +:204DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13 +:204DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3 +:204DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3 +:204E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2 +:204E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92 +:204E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72 +:204E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52 +:204E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32 +:204EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12 +:204EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2 +:204EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2 +:204F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1 +:204F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91 +:204F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71 +:204F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51 +:204F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31 +:204FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11 +:204FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1 +:204FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1 +:20500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0 +:20502000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF90 +:20504000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF70 +:20506000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50 +:20508000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30 +:2050A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10 +:2050C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0 +:2050E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD0 +:20510000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAF +:20512000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8F +:20514000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6F +:20516000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4F +:20518000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2F +:2051A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0F +:2051C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF +:2051E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCF +:20520000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAE +:20522000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8E +:20524000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6E +:20526000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4E +:20528000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2E +:2052A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0E +:2052C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEE +:2052E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCE +:20530000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD +:20532000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8D +:20534000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6D +:20536000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4D +:20538000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2D +:2053A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0D +:2053C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFED +:2053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD +:20540000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAC +:20542000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C +:20544000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C +:20546000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4C +:20548000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2C +:2054A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0C +:2054C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEC +:2054E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCC +:20550000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAB +:20552000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8B +:20554000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6B +:20556000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4B +:20558000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2B +:2055A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0B +:2055C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEB +:2055E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCB +:20560000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAA +:20562000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8A +:20564000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6A +:20566000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4A +:20568000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2A +:2056A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0A +:2056C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEA +:2056E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCA +:20570000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA9 +:20572000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF89 +:20574000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF69 +:20576000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF49 +:20578000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF29 +:2057A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF09 +:2057C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9 +:2057E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC9 +:20580000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8 +:20582000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF88 +:20584000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68 +:20586000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF48 +:20588000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF28 +:2058A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF08 +:2058C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE8 +:2058E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC8 +:20590000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7 +:20592000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87 +:20594000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67 +:20596000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47 +:20598000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27 +:2059A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07 +:2059C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7 +:2059E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7 +:205A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA6 +:205A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF86 +:205A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66 +:205A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF46 +:205A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF26 +:205AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF06 +:205AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE6 +:205AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC6 +:205B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA5 +:205B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF85 +:205B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF65 +:205B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45 +:205B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25 +:205BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05 +:205BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5 +:205BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5 +:205C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA4 +:205C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF84 +:205C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF64 +:205C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF44 +:205C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF24 +:205CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF04 +:205CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE4 +:205CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC4 +:205D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA3 +:205D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF83 +:205D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF63 +:205D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF43 +:205D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF23 +:205DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF03 +:205DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE3 +:205DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC3 +:205E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA2 +:205E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF82 +:205E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF62 +:205E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42 +:205E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22 +:205EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02 +:205EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2 +:205EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2 +:205F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA1 +:205F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF81 +:205F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF61 +:205F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF41 +:205F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF21 +:205FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF01 +:205FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE1 +:205FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC1 +:20600000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0 +:20602000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80 +:20604000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60 +:20606000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40 +:20608000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20 +:2060A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00 +:2060C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0 +:2060E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0 +:20610000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9F +:20612000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7F +:20614000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F +:20616000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3F +:20618000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1F +:2061A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF +:2061C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDF +:2061E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBF +:20620000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9E +:20622000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7E +:20624000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5E +:20626000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3E +:20628000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1E +:2062A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE +:2062C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDE +:2062E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBE +:20630000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9D +:20632000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7D +:20634000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D +:20636000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3D +:20638000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D +:2063A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD +:2063C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDD +:2063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD +:20640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C +:20642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C +:20644000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5C +:20646000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3C +:20648000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1C +:2064A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC +:2064C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDC +:2064E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBC +:20650000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9B +:20652000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7B +:20654000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5B +:20656000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3B +:20658000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1B +:2065A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB +:2065C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDB +:2065E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBB +:20660000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9A +:20662000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7A +:20664000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5A +:20666000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3A +:20668000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1A +:2066A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA +:2066C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDA +:2066E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBA +:20670000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF99 +:20672000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF79 +:20674000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF59 +:20676000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF39 +:20678000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF19 +:2067A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9 +:2067C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD9 +:2067E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB9 +:20680000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF98 +:20682000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF78 +:20684000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58 +:20686000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF38 +:20688000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF18 +:2068A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8 +:2068C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD8 +:2068E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8 +:20690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97 +:20692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77 +:20694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57 +:20696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37 +:20698000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17 +:2069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7 +:2069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7 +:2069E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7 +:206A0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF96 +:206A2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF76 +:206A4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF56 +:206A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF36 +:206A8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF16 +:206AA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6 +:206AC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD6 +:206AE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB6 +:206B0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF95 +:206B2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF75 +:206B4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55 +:206B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35 +:206B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15 +:206BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5 +:206BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5 +:206BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB5 +:206C0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF94 +:206C2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF74 +:206C4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF54 +:206C6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF34 +:206C8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF14 +:206CA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF4 +:206CC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD4 +:206CE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB4 +:206D0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF93 +:206D2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF73 +:206D4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF53 +:206D6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF33 +:206D8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF13 +:206DA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF3 +:206DC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD3 +:206DE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB3 +:206E0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF92 +:206E2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF72 +:206E4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52 +:206E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32 +:206E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12 +:206EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2 +:206EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2 +:206EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB2 +:206F0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF91 +:206F2000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF71 +:206F4000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF51 +:206F6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF31 +:206F8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF11 +:206FA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1 +:206FC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD1 +:206FE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB1 +:2070000055C000006EC000006CC000006AC0000068C0000066C0000064C0000062C0000043 +:2070200060C000005EC00000EEC400005AC0000058C0000056C0000054C0000052C00000F2 +:2070400050C0000078C000004CC000004AC0000048C0000046C0000044C0000042C00000BE +:2070600040C000003EC000003CC000003AC0000038C0000036C0000034C0000032C0000048 +:2070800030C000002EC000002CC000002AC0000028C0000026C0000024C0000022C00000A8 +:2070A00020C000001EC000001CC0000011241FBECFEFDAE0DEBFCDBF11E0A0E0B1E0EAE2B5 +:2070C000FFE702C005900D92A83AB107D9F711E0A8EAB1E001C01D92AE3BB107E1F78FD30B +:2070E00022C78ECFF89410926F0010928100109285001092840081E085BF15BE47985D9AEF +:20710000289A0C94000008952091B2013091B3012F5F3F4F3093B3012093B201932F37FFA6 +:2071200003C08EEF831B982F990F921710F447980895479A08951F920F920FB60F9211246E +:207140002F938F939F93EF93FF9310928500109284008091A8019091A901009741F00197D3 +:207160009093A9018093A801892B09F45D9A8091AA019091AB01009741F001979093AB0126 +:207180008093AA01892B09F4289AE0E0F0E0859194918F5F9F4F49F08091AC019091AD0151 +:2071A00001969093AD018093AC01FF91EF919F918F912F910F900FBE0F901F90189584E0BC +:2071C0008093E9000DC08091E8008B778093E80003C08EB3882351F08091E80082FFF9CFBE +:2071E0008091E80085FFEFCF8091F1000895982F83E08093E9008091E80085FD0DC0809136 +:20720000E8008E778093E80003C08EB3882369F08091E80080FFF9CF9093F1005D9884E6CB +:2072200090E09093A9018093A80108954F925F926F927F928F929F92AF92BF92CF92DF921E +:20724000EF92FF920F931F93CF93DF9384E08093E9008091E80082FF57C2289884E690E067 +:207260009093AB018093AA01AADF182F853481F48CE49DE19093AD018093AC0107B600FC4B +:20728000FDCFF999FECF81E180935700E89503C0843519F494DF8DE00DC28C34E1F38035F9 +:2072A000D1F3843721F484E4A2DF80E003C2813611F489E5FFC18134B1F481DF182F7FDFE3 +:2072C00090E0880F991FAA2797FDA095BA2F312F330F20E0442737FD4095542F822B932B68 +:2072E000A42BB52BB8C1803711F483E5E3C1833549F4C0E0D1E089917ADF21E0C730D20714 +:20730000D1F7D9C1863521F481E371DF80E3D2C1833731F487E86BDF85E969DF8EE1CAC149 +:207320008536B9F4E0E0F0E093E085E090935700E89507B600FCFDCF80935700E89507B65D +:2073400000FCFDCFE058FF4FA0E7E030FA0771F7A2CF823739F4E1E0F0E089E08093570024 +:207360008491A8C1863439F4E0E0F0E089E08093570084919FC18E3439F4E3E0F0E089E0E5 +:2073800080935700849196C1813539F4E2E0F0E089E08093570084918DC1823631F489E521 +:2073A00026DF80E024DF80E885C1823419F0873609F0E5C01092AD011092AC0100DF082FE8 +:2073C000FEDEF82EFCDE682E8554823008F071C1902F80E0CF2DD0E0C82BD92B10926F00B3 +:2073E000173609F04BC081E180935700E895DD24CC24C3943FC0E090AE01F090AF010091CC +:20740000B0011091B101B6E46B16D9F4ED2DF0E0EE29FF29E4918E2FEADEDD2081F082E08D +:2074200090E0A0E0B0E0E80EF91E0A1F1B1FE092AE01F092AF010093B0011093B101DC2470 +:2074400018C0D801C701B695A7959795879555D5CEDE82E090E0A0E0B0E0E80EF91E0A1FF6 +:207460001B1FE092AE01F092AF010093B0011093B1012197209709F0BECF7DC08090AE01F5 +:207480009090AF01A090B001B090B10196E4691609F05DC083E0F40180935700E89507B63E +:2074A00000FCFDCF54C0F6E46F1661F5772031F1E090AE01F090AF010091B0011091B1019E +:2074C0007EDED82ECC24852D90E08C299D29F7010C0140925700E895112482E090E0A0E08B +:2074E000B0E0E80EF91E0A1F1B1FE092AE01F092AF010093B0011093B10102C060DE582E1A +:20750000742423C0E090AE01F090AF010091B0011091B10116950795F794E79450DE682FFA +:20752000C701F3D48091AE019091AF01A091B001B091B1010296A11DB11D8093AE0190934D +:20754000AF01A093B001B093B101219704C05524772444244394209709F0A5CF96E46916B6 +:2075600041F485E0F40180935700E89507B600FCFDCF8DE03CDE82E080936F009CC0833492 +:2075800071F40091AE011091AF0119DE90E021E0F8010C0120935700E89511247CCE8336C8 +:2075A00019F5E090AE01F090AF010091B0011091B10105DEF701E16090E021E00C0120938C +:2075C0005700E895112482E090E0A0E0B0E0E80EF91E0A1F1B1FE092AE01F092AF0100936A +:2075E000B0011093B10157CE8D3661F4E091AE01F091AF0185E080935700E89507B600FCF2 +:20760000FDCF49CE823551F4E091AE01F091AF0105911491812FEBDD802F4CC0843421F5FE +:20762000E090AE01F090AF010091B0011091B10116950795F794E794C2DD682FC70165D4E2 +:207640008091AE019091AF01A091B001B091B1010296A11DB11D8093AE019093AF01A093D8 +:20766000B001B093B10117CE843609F5E090AE01F090AF010091B0011091B101D801C70142 +:20768000B695A7959795879538D4B1DD82E090E0A0E0B0E0E80EF91E0A1F1B1FE092AE010E +:2076A000F092AF010093B0011093B10104C08B3111F08FE39CDD83E08093E9009091E8002B +:2076C0008091E8008E778093E80095FF04C010C08EB38823C9F08091E80080FFF9CF809193 +:2076E000E8008E778093E80003C08EB3882361F08091E80080FFF9CF84E08093E9008091F1 +:20770000E8008B778093E800DF91CF911F910F91FF90EF90DF90CF90BF90AF909F908F90AC +:207720007F906F905F904F9008959091B601892F8F77813249F58091B7018032A1F081328A +:2077400019F5913A09F58091E800877F8093E8008DE091E067E070E007D28091E8008B770F +:207760008093E8000895913279F48091E800877F8093E8008DE091E067E070E059D2809196 +:20778000E8008E778093E800089582E061EC42E0B1D083E061E842E1ADD084E060E842E1F7 +:2077A000A9C084B7877F84BF88E10FB6F89480936000109260000FBE20E880E090E00FB643 +:2077C000F89420936100809361000FBE81E085BF92E095BF3F9A209A559AE1E6F0E02083A1 +:2077E000108247985D9A289A109289008AEF8093880090936F0083E080938100ECC040911A +:20780000000850910108109201081092000824B714BE88E10FB6F894809360001092600045 +:207820000FBE822F90E0FC01E270F07021FD14C0213019F4859194910BC0283069F480918F +:20784000090190910A014817590731F0859194918F5F9F4F09F046DCA4DF78941092AD0101 +:207860001092AC010CC0E2DC36D38091AC019091AD0181549F4110F01092140145DC8091FB +:207880001401882381F78091E00081608093E00029DC80E090E00895FA01923049F09330C0 +:2078A00061F09130F9F485E191E022E130E01EC087E291E02EE330E019C0882329F485E6FA +:2078C00091E024E030E012C0813029F489E691E022E230E00BC0823029F48DE891E028E106 +:2078E00030E004C080E090E020E030E091838083C90108958093E9008091EB00816080936A +:20790000EB001092ED006093EC004093ED008091EE00881F8827881F08958091B601882342 +:207920008CF403C08EB38823B1F08091E80082FFF9CF8091E8008B778093E80008958EB361 +:20794000882349F08091E80080FFF9CF8091E8008E778093E8000895EF92FF920F931F9307 +:2079600045D04CD008ED10E0F80180818F77808380818068808380818F7D808319BC1EBA45 +:207980001092B40180EEE82EF12CF70180818B7F8083F80180818160808380E060E042E049 +:2079A000A9DFE1EEF0E080818E7F8083E2EEF0E0808181608083808188608083F701808125 +:2079C0008E7F8083F8018081806180831F910F91FF90EF900895E7EDF0E080818160808335 +:2079E0008AE482BF81E08093B501B6CFE8EDF0E080818E7F80831092E20008951092DA00D6 +:207A00001092E10008951F920F920FB60F9211242F933F934F935F936F937F938F939F9389 +:207A2000AF93BF93EF93FF938091DA0080FF1BC08091D80080FF17C08091DA008E7F80930F +:207A4000DA008091D90080FF0BC080E189BD82E189BD09B400FEFDCF81E08EBB3BD203C0C7 +:207A600019BC1EBA37D28091E10080FF17C08091E20080FF13C08091E2008E7F8093E200CE +:207A80008091E20080618093E2008091D80080628093D80019BC85E08EBB1CD28091E10004 +:207AA00084FF2CC08091E20084FF28C080E189BD82E189BD09B400FEFDCF8091D8008F7D2D +:207AC0008093D8008091E1008F7E8093E1008091E2008F7E8093E2008091E20081608093EC +:207AE000E2008091B401882331F48091E30087FD02C081E001C084E08EBBECD18091E10056 +:207B000083FF21C08091E20083FF1DC08091E100877F8093E10082E08EBB1092B4018091B1 +:207B2000E1008E7F8093E1008091E2008E7F8093E2008091E20080618093E20080E060E005 +:207B400042E0D8DEC7D1FF91EF91BF91AF919F918F917F916F915F914F913F912F910F90B6 +:207B60000FBE0F901F9018959C014091BC015091BD014617570718F4F90190E044C06115C8 +:207B8000710511F0AB01F8CF8091E8008E778093E80040E050E0F0CF8EB3882309F444C006 +:207BA000853009F443C08091E80083FF02C081E008958091E80082FD31C08091E80080FFF4 +:207BC00022C08091F3009091F200782F60E0292F30E0262B372B07C081918093F10041503C +:207BE00050402F5F3F4F4115510519F02830310598F390E02830310509F491E08091E800A6 +:207C00008E778093E8004115510531F6992321F605C08EB3882341F0853041F08091E800FD +:207C200082FFF7CF80E0089582E0089583E008959C016115710529F48091E8008B7780934D +:207C4000E800F90126C08EB3882391F1853091F18091E80083FF02C081E008958091E80083 +:207C600082FFF1CF06C08091F10081936150704059F02091F3008091F200322F20E090E0C5 +:207C8000822B932B892B79F78091E8008B778093E80061157105B9F605C08EB3882341F0E2 +:207CA000853041F08091E80080FFF7CF80E0089582E0089583E008950F931F93DF93CF937C +:207CC00000D0CDB7DEB7E6EBF1E08091F100819381E0EE3BF807C9F728DD8091E80083FF3A +:207CE000E4C08091B6019091B701953009F46DC0963040F4913081F1913070F0933009F046 +:207D0000D4C02AC0983009F4A3C0993009F4B2C0963009F0CAC07CC0803809F4C6C082380B +:207D200009F0C3C08091BA0187708093E9008091EB001092E9002091E800277F2093E800A7 +:207D400090E025E0969587952A95E1F781708093F1001092F10087C0882319F0823009F0A2 +:207D6000A4C08F71823009F0A0C08091B801882331F52091BA01277009F497C02093E90006 +:207D80008091EB0080FF1BC0933021F48091EB00806213C08091EB0080618093EB0081E0C8 +:207DA00090E002C0880F991F2A95E2F78093EA001092EA008091EB0088608093EB0010929D +:207DC000E9008091E800877F51C0882309F06DC01091B8011F770FB7F8948091E800877F98 +:207DE0008093E8009ADD8091E80080FFFCCF8091E3008078812B8093E30080688093E30062 +:207E0000112311F482E001C083E08EBB0FBF4DC08058823008F049C08091B8019091B9014F +:207E20006091BA01AE014F5F5F4F36DDBC01009709F43BC08091E800877F8093E800898128 +:207E40009A8192DE8091E8008B778093E8002DC0803859F58091E800877F8093E8008091A3 +:207E6000B4018093F1008091E8008E778093E80054DD1BC08823C9F49091B8019230A8F4A4 +:207E80008091E800877F8093E8009093B40145DD8091B401882331F48091E30087FD02C01E +:207EA00081E001C084E08EBB70DC8091E80083FF0AC08091EB0080628093EB008091E8008D +:207EC000877F8093E8000F900F90CF91DF911F910F91089508951F938EB3882361F0109179 +:207EE000E9001092E9008091E80083FF01C0E4DE17701093E9001F910895F999FECF92BD02 +:207F000081BDF89A992780B50895262FF999FECF1FBA92BD81BD20BD0FB6F894FA9AF99A90 +:207F20000FBE01960895F894FFCF4341544552494E4100777700080000000000000801128E +:207F4000011001020000084123360001000201000109023E00020100803209040000010258 +:207F60000201000524001001042402040524060001070582030800FF09040100020A0000B4 +:207F8000000705040210000107058302100001040309042203410072006400750069006E80 +:207FA000006F0020004C0065006F006E006100720064006F00000018034100720064007557 +:127FC0000069006E006F0020004C004C0043000000006E +:00000001FF diff --git a/bootloaders/caterina/Caterina.c b/bootloaders/caterina/Caterina.c new file mode 100755 index 0000000..abcba2b --- /dev/null +++ b/bootloaders/caterina/Caterina.c @@ -0,0 +1,714 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Main source file for the CDC class bootloader. This file contains the complete bootloader logic.
+ */
+
+#define INCLUDE_FROM_CATERINA_C
+#include "Caterina.h"
+
+/** Contains the current baud rate and other settings of the first virtual serial port. This must be retained as some
+ * operating systems will not open the port unless the settings can be set successfully.
+ */
+static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0,
+ .CharFormat = CDC_LINEENCODING_OneStopBit,
+ .ParityType = CDC_PARITY_None,
+ .DataBits = 8 };
+
+/** Current address counter. This stores the current address of the FLASH or EEPROM as set by the host,
+ * and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued
+ * command.)
+ */
+static uint32_t CurrAddress;
+
+/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
+ * via a watchdog reset. When cleared the bootloader will exit, starting the watchdog and entering an infinite
+ * loop until the AVR restarts and the application runs.
+ */
+static bool RunBootloader = true;
+
+/* Pulse generation counters to keep track of the time remaining for each pulse type */
+#define TX_RX_LED_PULSE_PERIOD 100
+uint16_t TxLEDPulse = 0; // time remaining for Tx LED pulse
+uint16_t RxLEDPulse = 0; // time remaining for Rx LED pulse
+
+/* Bootloader timeout timer */
+#define TIMEOUT_PERIOD 8000
+uint16_t Timeout = 0;
+
+uint16_t bootKey = 0x7777;
+volatile uint16_t *const bootKeyPtr = (volatile uint16_t *)0x0800;
+
+void StartSketch(void)
+{
+ cli();
+
+ /* Undo TIMER1 setup and clear the count before running the sketch */
+ TIMSK1 = 0;
+ TCCR1B = 0;
+ TCNT1H = 0; // 16-bit write to TCNT1 requires high byte be written first
+ TCNT1L = 0;
+
+ /* Relocate the interrupt vector table to the application section */
+ MCUCR = (1 << IVCE);
+ MCUCR = 0;
+
+ L_LED_OFF();
+ TX_LED_OFF();
+ RX_LED_OFF();
+
+ /* jump to beginning of application space */
+ __asm__ volatile("jmp 0x0000");
+}
+
+/* Breathing animation on L LED indicates bootloader is running */
+uint16_t LLEDPulse;
+void LEDPulse(void)
+{
+ LLEDPulse++;
+ uint8_t p = LLEDPulse >> 8;
+ if (p > 127)
+ p = 254-p;
+ p += p;
+ if (((uint8_t)LLEDPulse) > p)
+ L_LED_OFF();
+ else
+ L_LED_ON();
+}
+
+/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously
+ * runs the bootloader processing routine until it times out or is instructed to exit.
+ */
+int main(void)
+{
+ /* Save the value of the boot key memory before it is overwritten */
+ uint16_t bootKeyPtrVal = *bootKeyPtr;
+ *bootKeyPtr = 0;
+
+ /* Check the reason for the reset so we can act accordingly */
+ uint8_t mcusr_state = MCUSR; // store the initial state of the Status register
+ MCUSR = 0; // clear all reset flags
+
+ /* Watchdog may be configured with a 15 ms period so must disable it before going any further */
+ wdt_disable();
+
+ if (mcusr_state & (1<<EXTRF)) {
+ // External reset - we should continue to self-programming mode.
+ } else if (mcusr_state == (1<<PORF) && pgm_read_word(0) != 0xFFFF) {
+ // After a power-on reset skip the bootloader and jump straight to sketch
+ // if one exists.
+ StartSketch();
+ } else if ((mcusr_state == (1<<WDRF)) && (bootKeyPtrVal != bootKey) && (pgm_read_word(0) != 0xFFFF)) {
+ // If it looks like an "accidental" watchdog reset then start the sketch.
+ StartSketch();
+ }
+
+ /* Setup hardware required for the bootloader */
+ SetupHardware();
+
+ /* Enable global interrupts so that the USB stack can function */
+ sei();
+
+ Timeout = 0;
+
+ while (RunBootloader)
+ {
+ CDC_Task();
+ USB_USBTask();
+ /* Time out and start the sketch if one is present */
+ if (Timeout > TIMEOUT_PERIOD)
+ RunBootloader = false;
+
+ LEDPulse();
+ }
+
+ /* Disconnect from the host - USB interface will be reset later along with the AVR */
+ USB_Detach();
+
+ /* Jump to beginning of application space to run the sketch - do not reset */
+ StartSketch();
+}
+
+/** Configures all hardware required for the bootloader. */
+void SetupHardware(void)
+{
+ /* Disable watchdog if enabled by bootloader/fuses */
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ /* Disable clock division */
+ clock_prescale_set(clock_div_1);
+
+ /* Relocate the interrupt vector table to the bootloader section */
+ MCUCR = (1 << IVCE);
+ MCUCR = (1 << IVSEL);
+
+ LED_SETUP();
+ CPU_PRESCALE(0);
+ L_LED_OFF();
+ TX_LED_OFF();
+ RX_LED_OFF();
+
+ /* Initialize TIMER1 to handle bootloader timeout and LED tasks.
+ * With 16 MHz clock and 1/64 prescaler, timer 1 is clocked at 250 kHz
+ * Our chosen compare match generates an interrupt every 1 ms.
+ * This interrupt is disabled selectively when doing memory reading, erasing,
+ * or writing since SPM has tight timing requirements.
+ */
+ OCR1AH = 0;
+ OCR1AL = 250;
+ TIMSK1 = (1 << OCIE1A); // enable timer 1 output compare A match interrupt
+ TCCR1B = ((1 << CS11) | (1 << CS10)); // 1/64 prescaler on timer 1 input
+
+ /* Initialize USB Subsystem */
+ USB_Init();
+}
+
+//uint16_t ctr = 0;
+ISR(TIMER1_COMPA_vect, ISR_BLOCK)
+{
+ /* Reset counter */
+ TCNT1H = 0;
+ TCNT1L = 0;
+
+ /* Check whether the TX or RX LED one-shot period has elapsed. if so, turn off the LED */
+ if (TxLEDPulse && !(--TxLEDPulse))
+ TX_LED_OFF();
+ if (RxLEDPulse && !(--RxLEDPulse))
+ RX_LED_OFF();
+
+ if (pgm_read_word(0) != 0xFFFF)
+ Timeout++;
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready
+ * to relay data to and from the attached USB host.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+ /* Setup CDC Notification, Rx and Tx Endpoints */
+ Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT,
+ ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE,
+ ENDPOINT_BANK_SINGLE);
+
+ Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK,
+ ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE,
+ ENDPOINT_BANK_SINGLE);
+
+ Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK,
+ ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE,
+ ENDPOINT_BANK_SINGLE);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ * the device from the USB host before passing along unhandled control requests to the library for processing
+ * internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+ /* Ignore any requests that aren't directed to the CDC interface */
+ if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
+ (REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ return;
+ }
+
+ /* Process CDC specific control requests */
+ switch (USB_ControlRequest.bRequest)
+ {
+ case CDC_REQ_GetLineEncoding:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+
+ /* Write the line coding data to the control endpoint */
+ Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
+ Endpoint_ClearOUT();
+ }
+
+ break;
+ case CDC_REQ_SetLineEncoding:
+ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+ {
+ Endpoint_ClearSETUP();
+
+ /* Read the line coding data in from the host into the global struct */
+ Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
+ Endpoint_ClearIN();
+ }
+
+ break;
+ }
+}
+
+#if !defined(NO_BLOCK_SUPPORT)
+/** Reads or writes a block of EEPROM or FLASH memory to or from the appropriate CDC data endpoint, depending
+ * on the AVR910 protocol command issued.
+ *
+ * \param[in] Command Single character AVR910 protocol command indicating what memory operation to perform
+ */
+static void ReadWriteMemoryBlock(const uint8_t Command)
+{
+ uint16_t BlockSize;
+ char MemoryType;
+
+ bool HighByte = false;
+ uint8_t LowByte = 0;
+
+ BlockSize = (FetchNextCommandByte() << 8);
+ BlockSize |= FetchNextCommandByte();
+
+ MemoryType = FetchNextCommandByte();
+
+ if ((MemoryType != 'E') && (MemoryType != 'F'))
+ {
+ /* Send error byte back to the host */
+ WriteNextResponseByte('?');
+
+ return;
+ }
+
+ /* Disable timer 1 interrupt - can't afford to process nonessential interrupts
+ * while doing SPM tasks */
+ TIMSK1 = 0;
+
+ /* Check if command is to read memory */
+ if (Command == 'g')
+ {
+ /* Re-enable RWW section */
+ boot_rww_enable();
+
+ while (BlockSize--)
+ {
+ if (MemoryType == 'F')
+ {
+ /* Read the next FLASH byte from the current FLASH page */
+ #if (FLASHEND > 0xFFFF)
+ WriteNextResponseByte(pgm_read_byte_far(CurrAddress | HighByte));
+ #else
+ WriteNextResponseByte(pgm_read_byte(CurrAddress | HighByte));
+ #endif
+
+ /* If both bytes in current word have been read, increment the address counter */
+ if (HighByte)
+ CurrAddress += 2;
+
+ HighByte = !HighByte;
+ }
+ else
+ {
+ /* Read the next EEPROM byte into the endpoint */
+ WriteNextResponseByte(eeprom_read_byte((uint8_t*)(intptr_t)(CurrAddress >> 1)));
+
+ /* Increment the address counter after use */
+ CurrAddress += 2;
+ }
+ }
+ }
+ else
+ {
+ uint32_t PageStartAddress = CurrAddress;
+
+ if (MemoryType == 'F')
+ {
+ boot_page_erase(PageStartAddress);
+ boot_spm_busy_wait();
+ }
+
+ while (BlockSize--)
+ {
+ if (MemoryType == 'F')
+ {
+ /* If both bytes in current word have been written, increment the address counter */
+ if (HighByte)
+ {
+ /* Write the next FLASH word to the current FLASH page */
+ boot_page_fill(CurrAddress, ((FetchNextCommandByte() << 8) | LowByte));
+
+ /* Increment the address counter after use */
+ CurrAddress += 2;
+ }
+ else
+ {
+ LowByte = FetchNextCommandByte();
+ }
+
+ HighByte = !HighByte;
+ }
+ else
+ {
+ /* Write the next EEPROM byte from the endpoint */
+ eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
+
+ /* Increment the address counter after use */
+ CurrAddress += 2;
+ }
+ }
+
+ /* If in FLASH programming mode, commit the page after writing */
+ if (MemoryType == 'F')
+ {
+ /* Commit the flash page to memory */
+ boot_page_write(PageStartAddress);
+
+ /* Wait until write operation has completed */
+ boot_spm_busy_wait();
+ }
+
+ /* Send response byte back to the host */
+ WriteNextResponseByte('\r');
+ }
+
+ /* Re-enable timer 1 interrupt disabled earlier in this routine */
+ TIMSK1 = (1 << OCIE1A);
+}
+#endif
+
+/** Retrieves the next byte from the host in the CDC data OUT endpoint, and clears the endpoint bank if needed
+ * to allow reception of the next data packet from the host.
+ *
+ * \return Next received byte from the host in the CDC data OUT endpoint
+ */
+static uint8_t FetchNextCommandByte(void)
+{
+ /* Select the OUT endpoint so that the next data byte can be read */
+ Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+
+ /* If OUT endpoint empty, clear it and wait for the next packet from the host */
+ while (!(Endpoint_IsReadWriteAllowed()))
+ {
+ Endpoint_ClearOUT();
+
+ while (!(Endpoint_IsOUTReceived()))
+ {
+ if (USB_DeviceState == DEVICE_STATE_Unattached)
+ return 0;
+ }
+ }
+
+ /* Fetch the next byte from the OUT endpoint */
+ return Endpoint_Read_8();
+}
+
+/** Writes the next response byte to the CDC data IN endpoint, and sends the endpoint back if needed to free up the
+ * bank when full ready for the next byte in the packet to the host.
+ *
+ * \param[in] Response Next response byte to send to the host
+ */
+static void WriteNextResponseByte(const uint8_t Response)
+{
+ /* Select the IN endpoint so that the next data byte can be written */
+ Endpoint_SelectEndpoint(CDC_TX_EPNUM);
+
+ /* If IN endpoint full, clear it and wait until ready for the next packet to the host */
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ Endpoint_ClearIN();
+
+ while (!(Endpoint_IsINReady()))
+ {
+ if (USB_DeviceState == DEVICE_STATE_Unattached)
+ return;
+ }
+ }
+
+ /* Write the next byte to the IN endpoint */
+ Endpoint_Write_8(Response);
+
+ TX_LED_ON();
+ TxLEDPulse = TX_RX_LED_PULSE_PERIOD;
+}
+
+#define STK_OK 0x10
+#define STK_INSYNC 0x14 // ' '
+#define CRC_EOP 0x20 // 'SPACE'
+#define STK_GET_SYNC 0x30 // '0'
+
+#define STK_GET_PARAMETER 0x41 // 'A'
+#define STK_SET_DEVICE 0x42 // 'B'
+#define STK_SET_DEVICE_EXT 0x45 // 'E'
+#define STK_LOAD_ADDRESS 0x55 // 'U'
+#define STK_UNIVERSAL 0x56 // 'V'
+#define STK_PROG_PAGE 0x64 // 'd'
+#define STK_READ_PAGE 0x74 // 't'
+#define STK_READ_SIGN 0x75 // 'u'
+
+/** Task to read in AVR910 commands from the CDC data OUT endpoint, process them, perform the required actions
+ * and send the appropriate response back to the host.
+ */
+void CDC_Task(void)
+{
+ /* Select the OUT endpoint */
+ Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+
+ /* Check if endpoint has a command in it sent from the host */
+ if (!(Endpoint_IsOUTReceived()))
+ return;
+
+ RX_LED_ON();
+ RxLEDPulse = TX_RX_LED_PULSE_PERIOD;
+
+ /* Read in the bootloader command (first byte sent from host) */
+ uint8_t Command = FetchNextCommandByte();
+
+ if (Command == 'E')
+ {
+ /* We nearly run out the bootloader timeout clock,
+ * leaving just a few hundred milliseconds so the
+ * bootloder has time to respond and service any
+ * subsequent requests */
+ Timeout = TIMEOUT_PERIOD - 500;
+
+ /* Re-enable RWW section - must be done here in case
+ * user has disabled verification on upload. */
+ boot_rww_enable_safe();
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if (Command == 'T')
+ {
+ FetchNextCommandByte();
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if ((Command == 'L') || (Command == 'P'))
+ {
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if (Command == 't')
+ {
+ // Return ATMEGA128 part code - this is only to allow AVRProg to use the bootloader
+ WriteNextResponseByte(0x44);
+ WriteNextResponseByte(0x00);
+ }
+ else if (Command == 'a')
+ {
+ // Indicate auto-address increment is supported
+ WriteNextResponseByte('Y');
+ }
+ else if (Command == 'A')
+ {
+ // Set the current address to that given by the host
+ CurrAddress = (FetchNextCommandByte() << 9);
+ CurrAddress |= (FetchNextCommandByte() << 1);
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if (Command == 'p')
+ {
+ // Indicate serial programmer back to the host
+ WriteNextResponseByte('S');
+ }
+ else if (Command == 'S')
+ {
+ // Write the 7-byte software identifier to the endpoint
+ for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++)
+ WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]);
+ }
+ else if (Command == 'V')
+ {
+ WriteNextResponseByte('0' + BOOTLOADER_VERSION_MAJOR);
+ WriteNextResponseByte('0' + BOOTLOADER_VERSION_MINOR);
+ }
+ else if (Command == 's')
+ {
+ WriteNextResponseByte(AVR_SIGNATURE_3);
+ WriteNextResponseByte(AVR_SIGNATURE_2);
+ WriteNextResponseByte(AVR_SIGNATURE_1);
+ }
+ else if (Command == 'e')
+ {
+ // Clear the application section of flash
+ for (uint32_t CurrFlashAddress = 0; CurrFlashAddress < BOOT_START_ADDR; CurrFlashAddress += SPM_PAGESIZE)
+ {
+ boot_page_erase(CurrFlashAddress);
+ boot_spm_busy_wait();
+ boot_page_write(CurrFlashAddress);
+ boot_spm_busy_wait();
+ }
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ #if !defined(NO_LOCK_BYTE_WRITE_SUPPORT)
+ else if (Command == 'l')
+ {
+ // Set the lock bits to those given by the host
+ boot_lock_bits_set(FetchNextCommandByte());
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ #endif
+ else if (Command == 'r')
+ {
+ WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS));
+ }
+ else if (Command == 'F')
+ {
+ WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS));
+ }
+ else if (Command == 'N')
+ {
+ WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS));
+ }
+ else if (Command == 'Q')
+ {
+ WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS));
+ }
+ #if !defined(NO_BLOCK_SUPPORT)
+ else if (Command == 'b')
+ {
+ WriteNextResponseByte('Y');
+
+ // Send block size to the host
+ WriteNextResponseByte(SPM_PAGESIZE >> 8);
+ WriteNextResponseByte(SPM_PAGESIZE & 0xFF);
+ }
+ else if ((Command == 'B') || (Command == 'g'))
+ {
+ // Keep resetting the timeout counter if we're receiving self-programming instructions
+ Timeout = 0;
+ // Delegate the block write/read to a separate function for clarity
+ ReadWriteMemoryBlock(Command);
+ }
+ #endif
+ #if !defined(NO_FLASH_BYTE_SUPPORT)
+ else if (Command == 'C')
+ {
+ // Write the high byte to the current flash page
+ boot_page_fill(CurrAddress, FetchNextCommandByte());
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if (Command == 'c')
+ {
+ // Write the low byte to the current flash page
+ boot_page_fill(CurrAddress | 0x01, FetchNextCommandByte());
+
+ // Increment the address
+ CurrAddress += 2;
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if (Command == 'm')
+ {
+ // Commit the flash page to memory
+ boot_page_write(CurrAddress);
+
+ // Wait until write operation has completed
+ boot_spm_busy_wait();
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if (Command == 'R')
+ {
+ #if (FLASHEND > 0xFFFF)
+ uint16_t ProgramWord = pgm_read_word_far(CurrAddress);
+ #else
+ uint16_t ProgramWord = pgm_read_word(CurrAddress);
+ #endif
+
+ WriteNextResponseByte(ProgramWord >> 8);
+ WriteNextResponseByte(ProgramWord & 0xFF);
+ }
+ #endif
+ #if !defined(NO_EEPROM_BYTE_SUPPORT)
+ else if (Command == 'D')
+ {
+ // Read the byte from the endpoint and write it to the EEPROM
+ eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
+
+ // Increment the address after use
+ CurrAddress += 2;
+
+ // Send confirmation byte back to the host
+ WriteNextResponseByte('\r');
+ }
+ else if (Command == 'd')
+ {
+ // Read the EEPROM byte and write it to the endpoint
+ WriteNextResponseByte(eeprom_read_byte((uint8_t*)((intptr_t)(CurrAddress >> 1))));
+
+ // Increment the address after use
+ CurrAddress += 2;
+ }
+ #endif
+ else if (Command != 27)
+ {
+ // Unknown (non-sync) command, return fail code
+ WriteNextResponseByte('?');
+ }
+
+
+ /* Select the IN endpoint */
+ Endpoint_SelectEndpoint(CDC_TX_EPNUM);
+
+ /* Remember if the endpoint is completely full before clearing it */
+ bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
+
+ /* Send the endpoint data to the host */
+ Endpoint_ClearIN();
+
+ /* If a full endpoint's worth of data was sent, we need to send an empty packet afterwards to signal end of transfer */
+ if (IsEndpointFull)
+ {
+ while (!(Endpoint_IsINReady()))
+ {
+ if (USB_DeviceState == DEVICE_STATE_Unattached)
+ return;
+ }
+
+ Endpoint_ClearIN();
+ }
+
+ /* Wait until the data has been sent to the host */
+ while (!(Endpoint_IsINReady()))
+ {
+ if (USB_DeviceState == DEVICE_STATE_Unattached)
+ return;
+ }
+
+ /* Select the OUT endpoint */
+ Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+
+ /* Acknowledge the command from the host */
+ Endpoint_ClearOUT();
+}
+
diff --git a/bootloaders/caterina/Caterina.h b/bootloaders/caterina/Caterina.h new file mode 100755 index 0000000..f8251d4 --- /dev/null +++ b/bootloaders/caterina/Caterina.h @@ -0,0 +1,99 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Header file for BootloaderCDC.c.
+ */
+
+#ifndef _CDC_H_
+#define _CDC_H_
+
+ /* Includes: */
+ #include <avr/io.h>
+ #include <avr/wdt.h>
+ #include <avr/boot.h>
+ #include <avr/eeprom.h>
+ #include <avr/power.h>
+ #include <avr/interrupt.h>
+ #include <stdbool.h>
+
+ #include "Descriptors.h"
+
+ #include <LUFA/Drivers/USB/USB.h>
+ /* Macros: */
+ /** Version major of the CDC bootloader. */
+ #define BOOTLOADER_VERSION_MAJOR 0x01
+
+ /** Version minor of the CDC bootloader. */
+ #define BOOTLOADER_VERSION_MINOR 0x00
+
+ /** Hardware version major of the CDC bootloader. */
+ #define BOOTLOADER_HWVERSION_MAJOR 0x01
+
+ /** Hardware version minor of the CDC bootloader. */
+ #define BOOTLOADER_HWVERSION_MINOR 0x00
+
+ /** Eight character bootloader firmware identifier reported to the host when requested */
+ #define SOFTWARE_IDENTIFIER "CATERINA"
+
+ #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+ #define LED_SETUP() DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5);
+ #define L_LED_OFF() PORTC &= ~(1<<7)
+ #define L_LED_ON() PORTC |= (1<<7)
+ #define L_LED_TOGGLE() PORTC ^= (1<<7)
+ #define TX_LED_OFF() PORTD |= (1<<5)
+ #define TX_LED_ON() PORTD &= ~(1<<5)
+ #define RX_LED_OFF() PORTB |= (1<<0)
+ #define RX_LED_ON() PORTB &= ~(1<<0)
+
+ /* Type Defines: */
+ /** Type define for a non-returning pointer to the start of the loaded application in flash memory. */
+ typedef void (*AppPtr_t)(void) ATTR_NO_RETURN;
+
+ /* Function Prototypes: */
+ void StartSketch(void);
+ void LEDPulse(void);
+
+ void CDC_Task(void);
+ void SetupHardware(void);
+
+ void EVENT_USB_Device_ConfigurationChanged(void);
+
+ #if defined(INCLUDE_FROM_CATERINA_C) || defined(__DOXYGEN__)
+ #if !defined(NO_BLOCK_SUPPORT)
+ static void ReadWriteMemoryBlock(const uint8_t Command);
+ #endif
+ static uint8_t FetchNextCommandByte(void);
+ static void WriteNextResponseByte(const uint8_t Response);
+ #endif
+
+#endif
+
diff --git a/bootloaders/caterina/Descriptors.c b/bootloaders/caterina/Descriptors.c new file mode 100755 index 0000000..c5feaf5 --- /dev/null +++ b/bootloaders/caterina/Descriptors.c @@ -0,0 +1,262 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ * computer-readable structures which the host requests upon device enumeration, to determine
+ * the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/** Device descriptor structure. This descriptor, located in SRAM memory, describes the overall
+ * device characteristics, including the supported USB version, control endpoint size and the
+ * number of device configurations. The descriptor is read out by the USB host when the enumeration
+ * process begins.
+ */
+const USB_Descriptor_Device_t DeviceDescriptor =
+{
+ .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+ .USBSpecification = VERSION_BCD(01.10),
+ .Class = CDC_CSCP_CDCClass,
+ .SubClass = CDC_CSCP_NoSpecificSubclass,
+ .Protocol = CDC_CSCP_NoSpecificProtocol,
+
+ .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
+
+ .VendorID = DEVICE_VID,
+ .ProductID = DEVICE_PID,
+ .ReleaseNumber = VERSION_BCD(00.01),
+
+ .ManufacturerStrIndex = 0x02,
+ .ProductStrIndex = 0x01,
+ .SerialNumStrIndex = NO_DESCRIPTOR,
+
+ .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in SRAM memory, describes the usage
+ * of the device in one of its supported configurations, including information about any device interfaces
+ * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ * a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t ConfigurationDescriptor =
+{
+ .Config =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+ .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+ .TotalInterfaces = 2,
+
+ .ConfigurationNumber = 1,
+ .ConfigurationStrIndex = NO_DESCRIPTOR,
+
+ .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED,
+
+ .MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
+ },
+
+ .CDC_CCI_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = 0,
+ .AlternateSetting = 0,
+
+ .TotalEndpoints = 1,
+
+ .Class = CDC_CSCP_CDCClass,
+ .SubClass = CDC_CSCP_ACMSubclass,
+ .Protocol = CDC_CSCP_ATCommandProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .CDC_Functional_Header =
+ {
+ .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+ .Subtype = 0x00,
+
+ .CDCSpecification = VERSION_BCD(01.10),
+ },
+
+ .CDC_Functional_ACM =
+ {
+ .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+ .Subtype = 0x02,
+
+ .Capabilities = 0x04,
+ },
+
+ .CDC_Functional_Union =
+ {
+ .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+ .Subtype = 0x06,
+
+ .MasterInterfaceNumber = 0,
+ .SlaveInterfaceNumber = 1,
+ },
+
+ .CDC_NotificationEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_NOTIFICATION_EPSIZE,
+ .PollingIntervalMS = 0xFF
+ },
+
+ .CDC_DCI_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = 1,
+ .AlternateSetting = 0,
+
+ .TotalEndpoints = 2,
+
+ .Class = CDC_CSCP_CDCDataClass,
+ .SubClass = CDC_CSCP_NoDataSubclass,
+ .Protocol = CDC_CSCP_NoDataProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .CDC_DataOutEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM),
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_TXRX_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+
+ .CDC_DataInEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM),
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_TXRX_EPSIZE,
+ .PollingIntervalMS = 0x01
+ }
+};
+
+/** Language descriptor structure. This descriptor, located in SRAM memory, is returned when the host requests
+ * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ * via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t LanguageString =
+{
+ .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
+
+ .UnicodeString = {LANGUAGE_ID_ENG}
+};
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ * Descriptor.
+ */
+const USB_Descriptor_String_t ProductString =
+{
+ .Header = {.Size = USB_STRING_LEN(16), .Type = DTYPE_String},
+
+ #if DEVICE_PID == 0x0036
+ .UnicodeString = L"Arduino Leonardo"
+ #else
+ .UnicodeString = L"USB IO board "
+ #endif
+};
+
+const USB_Descriptor_String_t ManufNameString =
+{
+ .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+ #if DEVICE_VID == 0x2341
+ .UnicodeString = L"Arduino LLC"
+ #else
+ .UnicodeString = L"Unknown "
+ #endif
+};
+
+/** This function is called by the library when in device mode, and must be overridden (see LUFA library "USB Descriptors"
+ * documentation) by the application code so that the address and size of a requested descriptor can be given
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ * USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+ const uint8_t wIndex,
+ const void** const DescriptorAddress)
+{
+ const uint8_t DescriptorType = (wValue >> 8);
+ const uint8_t DescriptorNumber = (wValue & 0xFF);
+
+ const void* Address = NULL;
+ uint16_t Size = NO_DESCRIPTOR;
+
+ switch (DescriptorType)
+ {
+ case DTYPE_Device:
+ Address = &DeviceDescriptor;
+ Size = sizeof(USB_Descriptor_Device_t);
+ break;
+ case DTYPE_Configuration:
+ Address = &ConfigurationDescriptor;
+ Size = sizeof(USB_Descriptor_Configuration_t);
+ break;
+ case DTYPE_String:
+ if (!(DescriptorNumber))
+ {
+ Address = &LanguageString;
+ Size = LanguageString.Header.Size;
+ }
+ else if (DescriptorNumber == DeviceDescriptor.ProductStrIndex)
+ {
+ Address = &ProductString;
+ Size = ProductString.Header.Size;
+ } else if (DescriptorNumber == DeviceDescriptor.ManufacturerStrIndex)
+ {
+ Address = &ManufNameString;
+ Size = ManufNameString.Header.Size;
+ }
+
+ break;
+ }
+
+ *DescriptorAddress = Address;
+ return Size;
+}
+
diff --git a/bootloaders/caterina/Descriptors.h b/bootloaders/caterina/Descriptors.h new file mode 100755 index 0000000..94091ae --- /dev/null +++ b/bootloaders/caterina/Descriptors.h @@ -0,0 +1,139 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+ /* Includes: */
+ #include <LUFA/Drivers/USB/USB.h>
+
+ /* Macros: */
+ #if defined(__AVR_AT90USB1287__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x97
+ #define AVR_SIGNATURE_3 0x82
+ #elif defined(__AVR_AT90USB647__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x96
+ #define AVR_SIGNATURE_3 0x82
+ #elif defined(__AVR_AT90USB1286__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x97
+ #define AVR_SIGNATURE_3 0x82
+ #elif defined(__AVR_AT90USB646__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x96
+ #define AVR_SIGNATURE_3 0x82
+ #elif defined(__AVR_ATmega32U6__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x95
+ #define AVR_SIGNATURE_3 0x88
+ #elif defined(__AVR_ATmega32U4__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x95
+ #define AVR_SIGNATURE_3 0x87
+ #elif defined(__AVR_ATmega16U4__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x94
+ #define AVR_SIGNATURE_3 0x88
+ #elif defined(__AVR_ATmega32U2__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x95
+ #define AVR_SIGNATURE_3 0x8A
+ #elif defined(__AVR_ATmega16U2__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x94
+ #define AVR_SIGNATURE_3 0x89
+ #elif defined(__AVR_AT90USB162__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x94
+ #define AVR_SIGNATURE_3 0x82
+ #elif defined(__AVR_ATmega8U2__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x93
+ #define AVR_SIGNATURE_3 0x89
+ #elif defined(__AVR_AT90USB82__)
+ #define AVR_SIGNATURE_1 0x1E
+ #define AVR_SIGNATURE_2 0x94
+ #define AVR_SIGNATURE_3 0x82
+ #else
+ #error The selected AVR part is not currently supported by this bootloader.
+ #endif
+
+ /** Endpoint number for the CDC control interface event notification endpoint. */
+ #define CDC_NOTIFICATION_EPNUM 2
+
+ /** Endpoint number for the CDC data interface TX (data IN) endpoint. */
+ #define CDC_TX_EPNUM 3
+
+ /** Endpoint number for the CDC data interface RX (data OUT) endpoint. */
+ #define CDC_RX_EPNUM 4
+
+ /** Size of the CDC data interface TX and RX data endpoint banks, in bytes. */
+ #define CDC_TXRX_EPSIZE 16
+
+ /** Size of the CDC control interface notification endpoint bank, in bytes. */
+ #define CDC_NOTIFICATION_EPSIZE 8
+
+ /* Type Defines: */
+ /** Type define for the device configuration descriptor structure. This must be defined in the
+ * application code, as the configuration descriptor contains several sub-descriptors which
+ * vary between devices, and which describe the device's usage to the host.
+ */
+ typedef struct
+ {
+ USB_Descriptor_Configuration_Header_t Config;
+
+ // CDC Control Interface
+ USB_Descriptor_Interface_t CDC_CCI_Interface;
+ USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header;
+ USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM;
+ USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union;
+ USB_Descriptor_Endpoint_t CDC_NotificationEndpoint;
+
+ // CDC Data Interface
+ USB_Descriptor_Interface_t CDC_DCI_Interface;
+ USB_Descriptor_Endpoint_t CDC_DataOutEndpoint;
+ USB_Descriptor_Endpoint_t CDC_DataInEndpoint;
+ } USB_Descriptor_Configuration_t;
+
+ /* Function Prototypes: */
+ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+ const uint8_t wIndex,
+ const void** const DescriptorAddress)
+ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/bootloaders/caterina/Makefile b/bootloaders/caterina/Makefile new file mode 100755 index 0000000..873f8bd --- /dev/null +++ b/bootloaders/caterina/Makefile @@ -0,0 +1,728 @@ +# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
+# >> Modified for use with the LUFA project. <<
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+# Dean Camera
+# Opendous Inc.
+# Denver Gingerich
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+# Please customize the avrdude settings below first!
+#
+# make doxygen = Generate DoxyGen documentation for the project (must have
+# DoxyGen installed)
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# USB vendor ID (VID)
+# official Arduino LLC VID
+# VID = 0x2341
+
+
+# USB product ID (PID)
+# official Leonardo PID
+# PID = 0x0036
+
+
+# MCU name
+MCU = atmega32u4
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# "Board" inside the application directory.
+BOARD = USER
+
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Starting byte address of the bootloader, as a byte address - computed via the formula
+# BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024)
+#
+# Note that the bootloader size and start address given in AVRStudio is in words and not
+# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
+FLASH_SIZE_KB = 32
+BOOT_SECTION_SIZE_KB = 4
+BOOT_START = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
+
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+
+# Target file name (without extension).
+TARGET = Caterina
+
+
+# Object files directory
+# To put object files in current directory, use a dot (.), do NOT make
+# this an empty or blank macro!
+OBJDIR = .
+
+
+# Path to the LUFA library
+LUFA_PATH = ../../../../../LUFA-111009
+
+
+# LUFA library compile-time options and predefined tokens
+LUFA_OPTS = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D ORDERED_EP_CONFIG
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_RAM_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+LUFA_OPTS += -D NO_INTERNAL_SERIAL
+LUFA_OPTS += -D NO_DEVICE_SELF_POWER
+LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
+LUFA_OPTS += -D NO_SOF_EVENTS
+
+#LUFA_OPTS += -D NO_BLOCK_SUPPORT
+#LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT
+#LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT
+LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(TARGET).c \
+ Descriptors.c \
+ $(LUFA_SRC_USB) \
+
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+
+# List Assembler source files here.
+# Make them always end in a capital .S. Files ending in a lowercase .s
+# will not be considered source files but generated files (assembler
+# output from the compiler), and will be deleted upon "make clean"!
+# Even though the DOS/Win* filesystem matches both .s and .S the same,
+# it will preserve the spelling of the filenames, and gcc itself does
+# care about how the name is spelled on its command-line.
+ASRC =
+
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = s
+
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+# AVR Studio 4.10 requires dwarf-2.
+# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+
+# List any extra directories to look for include files here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(LUFA_PATH)/
+
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=c99
+
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
+CDEFS += -DDEVICE_VID=$(VID)UL
+CDEFS += -DDEVICE_PID=$(PID)UL
+CDEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
+ADEFS += $(LUFA_OPTS)
+
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
+CPPDEFS += $(LUFA_OPTS)
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+
+
+#---------------- Compiler Options C ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+
+
+#---------------- Compiler Options C++ ----------------
+# -g*: generate debugging information
+# -O*: optimization level
+# -f...: tuning, see GCC manual and avr-libc documentation
+# -Wall...: warning level
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CPPFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+
+
+#---------------- Assembler Options ----------------
+# -Wa,...: tell GCC to pass this to the assembler.
+# -adhlns: create listing
+# -gstabs: have the assembler create line number information; note that
+# for use in COFF files, additional information about filenames
+# and function names needs to be present in the assembler source
+# files -- see avr-libc docs [FIXME: not yet described there]
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex
+# dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB =
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB =
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+
+MATH_LIB = -lm
+
+
+# List any extra directories to look for libraries here.
+# Each directory must be seperated by a space.
+# Use forward slashes for directory separators.
+# For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
+#---------------- Linker Options ----------------
+# -Wl,...: tell GCC to pass this to linker.
+# -Map: create map file
+# --cref: add cross reference to map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)
+LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = avrispmkII
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = usb
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+# just set to localhost unless doing some sort of crazy debugging when
+# avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = /Applications/avrdude -C /Applications/avrdude.conf -B 1
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = -------- end --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+
+
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+
+
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex eep lss sym
+#build: lib
+
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+ @echo
+ @echo $(MSG_BEGIN)
+
+end:
+ @echo $(MSG_END)
+ @echo
+
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
+MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
+FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+
+
+sizebefore:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+sizeafter:
+ @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+ 2>/dev/null; echo; fi
+
+
+
+# Display compiler version information.
+gccversion :
+ @$(CC) --version
+
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+ $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+# Generate avr-gdb config/init file which does the following:
+# define the reset signal, load the target file, connect to target, and set
+# a breakpoint at main().
+gdb-config:
+ @$(REMOVE) $(GDBINIT_FILE)
+ @echo define reset >> $(GDBINIT_FILE)
+ @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+ @echo end >> $(GDBINIT_FILE)
+ @echo file $(TARGET).elf >> $(GDBINIT_FILE)
+ @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+ @echo load >> $(GDBINIT_FILE)
+endif
+ @echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+ @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+ @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+ $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+ @$(WINSHELL) /c pause
+
+else
+ @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+ $(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+ @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(TARGET).elf
+ @echo
+ @echo $(MSG_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+ @echo
+ @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+ $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+ @echo
+ @echo $(MSG_FLASH) $@
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
+
+%.eep: %.elf
+ @echo
+ @echo $(MSG_EEPROM) $@
+ -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+ --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+ @echo
+ @echo $(MSG_EXTENDED_LISTING) $@
+ $(OBJDUMP) -h -S -z $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+ @echo
+ @echo $(MSG_SYMBOL_TABLE) $@
+ $(NM) -n $< > $@
+
+
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+ @echo
+ @echo $(MSG_CREATING_LIBRARY) $@
+ $(AR) $@ $(OBJ)
+
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+ @echo
+ @echo $(MSG_LINKING) $@
+ $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+ @echo
+ @echo $(MSG_COMPILING) $<
+ $(CC) -c $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+ @echo
+ @echo $(MSG_COMPILING_CPP) $<
+ $(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+ $(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+ $(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+ @echo
+ @echo $(MSG_ASSEMBLING) $<
+ $(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+ @echo
+ @echo $(MSG_CLEANING)
+ $(REMOVE) $(TARGET).hex
+ $(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET).cof
+ $(REMOVE) $(TARGET).elf
+ $(REMOVE) $(TARGET).map
+ $(REMOVE) $(TARGET).sym
+ $(REMOVE) $(TARGET).lss
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+ $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+ $(REMOVE) $(SRC:.c=.s)
+ $(REMOVE) $(SRC:.c=.d)
+ $(REMOVE) $(SRC:.c=.i)
+ $(REMOVEDIR) .dep
+
+doxygen:
+ @echo Generating Project Documentation \($(TARGET)\)...
+ @doxygen Doxygen.conf
+ @echo Documentation Generation Complete.
+
+clean_doxygen:
+ rm -rf Documentation
+
+checksource:
+ @for f in $(SRC) $(CPPSRC) $(ASRC); do \
+ if [ -f $$f ]; then \
+ echo "Found Source File: $$f" ; \
+ else \
+ echo "Source File Not Found: $$f" ; \
+ fi; done
+
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean \
+clean_list clean_doxygen program debug gdb-config checksource
+
diff --git a/bootloaders/diskloader/DiskLoader-Leonardo.hex b/bootloaders/diskloader/DiskLoader-Leonardo.hex deleted file mode 100644 index 0d0c167..0000000 --- a/bootloaders/diskloader/DiskLoader-Leonardo.hex +++ /dev/null @@ -1,115 +0,0 @@ -:1078000011241FBECFEFDAE0DEBFCDBFFFC04101C4
-:1078100042144505560455026403740300001E9586
-:1078200087020110030000C18081C106C0FF0A0069
-:107830000CA10185037508150026FF00954009017C
-:107840008102954009029102C0040309041A033021
-:1078500000300030003000300030003000300031A7
-:1078600000370030003100380341007200640075B9
-:107870000069006E006F0020004C0065006F006E14
-:10788000006100720064006F00200062006F006FF2
-:107890000074006C006F00610064006500720018E5
-:1078A00003410072006400750069006E006F0020E3
-:1078B000004C004C00430012010002020000404155
-:1078C0002334000001000203011201000200000045
-:1078D0004041233400000100020301090264000357
-:1078E00001008032080B00020202010009040000BE
-:1078F0000102020000052400100105240101010419
-:107900002402020524060001070581031000400936
-:10791000040100020A0000000705020240000007FF
-:107920000583024000000904020001030000000971
-:107930002101010001221E000705840340004000D0
-:1079400020918A0130918B012C5F3F4F30938B0146
-:1079500020938A01C901892F99278695982F803411
-:1079600018F08FE7891B982F990F921710F44798FA
-:107970000895479A08955D9A289A81E08093E000DF
-:107980001092E200EE27FF27099408950F931F93AA
-:10799000CF93DF93982FEB01042F10E088E760303E
-:1079A000780730F411E083E0FB0180935700E895FD
-:1079B000892F68E071E0402FF8D0112311F107B64C
-:1079C00000FCFDCF402F4695FE01A8E0B1E020E08D
-:1079D00031E009C08D919D910C0130935700E895DD
-:1079E000112432962F5F2417A8F385E0FE018093BF
-:1079F0005700E89507B600FCFDCF81E18093570062
-:107A0000E895DF91CF911F910F91089588E10FB60E
-:107A1000F89480936000109260000FBE5D9A289ADF
-:107A200047983F9A209A559A90E890936100109257
-:107A3000610081E885BF95BF9FD084E18093880174
-:107A400080E180938901E0E0F0E0859194918F5F7F
-:107A50009F4F19F081E080938F01EE24FF24BB2417
-:107A6000B39454EFC52E51E0D52E13D2082F8EE0DB
-:107A700098E7FC012491319602964491201711F069
-:107A80002223B9F7109291011092900182E068E0F0
-:107A900071E08BD0013479F4609108016058633053
-:107AA00028F0683111F064E001C063E0C62FD0E037
-:107AB000CF5DD7480EC0063571F480910801803340
-:107AC00011F011E022C080910A01C82FD0E0C25EFF
-:107AD000D74811E022C0053721F413E0CEE1D8E702
-:107AE0001CC0053539F4E0900801F0900901EE0C56
-:107AF000FF1C0AC0043631F482E0B701409109014D
-:107B000045DF02C0043721F010E0C5E2D8E705C028
-:107B100010910901E701E10EF11CBBD18097B1F48E
-:107B200083E068E871E041E050E059D0112329F08A
-:107B3000412F50E083E8BE0152D083E469E871E050
-:107B400041E050E04CD0013509F08FCFD092910147
-:107B5000C0929001B0928F01EE24FF2486CFFC01E9
-:107B6000289884E680938D0104C08091F100819370
-:107B700061506623D1F708951092910110929001FF
-:107B800010928E0110928F0181E08093D70080EADD
-:107B90008093D80082E189BD09B400FEFDCF80E961
-:107BA0008093D8001092E0000895FB018093E900D3
-:107BB00024E69BE611C08091E80085FFFCCF289861
-:107BC00020938D018091F10081938091E80085FDE3
-:107BD00002C09093E8004150442369F70895982F1C
-:107BE000FB01282F207287708093E90064E63AE356
-:107BF00017C08091E80085FFFCCF97FF02C08491F9
-:107C000001C080813196211180E05D9860938C01E4
-:107C10008093F1008091E80085FD02C03093E80078
-:107C2000415050408FEF4F3F580719F796FF03C060
-:107C30008AE38093E800089580919301813299F45A
-:107C40005D9884E680938C0120E030E003C0808161
-:107C50008093F100F901E050FF4F2F5F3F4F283034
-:107C60003105A9F714C0803261F48091E80082FFE9
-:107C7000FCCF80E091E067E072DF8BEF8093E8005B
-:107C800006C0823221F4809194018093070181E043
-:107C9000089520919501223289F1213081F480915B
-:107CA000980190919901089711F420939A0180917D
-:107CB0009A01882309F04FC0E9ECF8E74EC0223062
-:107CC00021F484E6EBEDF8E71CC0233009F041C055
-:107CD00080919401882319F4E9E4F8E73EC08230EA
-:107CE00019F4E7E6F8E739C0833019F4EDE4F8E772
-:107CF00034C0813071F5EFE9F8E72FC081E0EBE2A5
-:107D0000F8E790919801382F981708F4392F90913F
-:107D10008C0120E04EEF8091E8008570E1F38091C6
-:107D2000E80082FD12C02F5F84915D988093F1007E
-:107D3000822F8F7311F44093E800319694E6231755
-:107D400050F390938C0181E0089590938C0180E032
-:107D5000089580E00895E7EBF8E78491D2CF109280
-:107D6000E9008091E80083FF61C082E991E068E06A
-:107D7000F6DE82EF8093E8008091920187FF05C0D4
-:107D80008091E80080FFFCCF03C08EEF8093E80075
-:107D900080919301853051F48091E80080FFFCCF01
-:107DA0008091940180688093E30039C08930E1F4C8
-:107DB0008091940180938E01E7E2F8E791E031E051
-:107DC00026E39093E9003093EB0084918093EC00DC
-:107DD0002093ED009F5F3196953099F78EE7809361
-:107DE000EA001092EA001BC0883049F490918E019D
-:107DF0005D9884E680938C019093F10010C08823F5
-:107E000039F45D9884E680938C011092F10007C0EC
-:107E1000863011F43EDF01C00FDF882321F08EEFA2
-:107E20008093E800089581E28093EB0008958091AB
-:107E3000E1001092E100282F83FF0CC01092E900AE
-:107E400081E08093EB001092EC0082E38093ED00E0
-:107E500010928E0122FF1CC080918C01882331F08A
-:107E6000815080938C01882309F45D9A80918D0163
-:107E7000882331F0815080938D01882309F4289A5A
-:107E800080918F01882321F410929101109290012A
-:107E900008951F93CF93DF9312E0C0E9D1E05FDF35
-:107EA000C6DF1093E9008091E80085FF13C0289891
-:107EB00084E680938D019091F1008091E80085FD2A
-:107EC00003C08BE68093E800892F90E0DF91CF918B
-:107ED0001F91089580919001909191010197909345
-:107EE0009101809390018091900190919101892B53
-:0E7EF00009F441DDCE010197F1F722DDD0CF7C
-:087EFE0000E10000000000009B
-:040000030000780081
-:00000001FF
diff --git a/bootloaders/diskloader/Makefile b/bootloaders/diskloader/Makefile deleted file mode 100644 index 6ac3db3..0000000 --- a/bootloaders/diskloader/Makefile +++ /dev/null @@ -1,105 +0,0 @@ -############################################################################### -# Makefile for DiskLoader -############################################################################### - -## General Flags -PROJECT = DiskLoader -TARGET = DiskLoader.elf -CC = avr-gcc - -# BOARD2 -MCU = atmega32u4 -AVR_FREQ = 16000000L - -# Specify the Arduino model using the assigned PID. This is used by Descriptors.c
-# to set PID and product descriptor string
-# Arduino Leonardo PID
-ARDUINO_MODEL_PID = 0x0034
-# Arduino Micro PID
-#ARDUINO_MODEL_PID = 0x0035 - -# Change if your programmer is different -AVRDUDE_PROGRAMMER = avrispmkII -AVRDUDE_PORT = usb - -# program name should not be changed... -PROGRAM = DiskLoader - -AVRDUDE = avrdude -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -p $(MCU) - -## Options common to compile, link and assembly rules -COMMON = -mmcu=$(MCU) - -override CFLAGS = -g -Wall -Os -mmcu=$(MCU) -DF_CPU=$(AVR_FREQ) -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID) $(DEFS) -ffunction-sections -gdwarf-2 -fdata-sections -fno-split-wide-types - -## Assembly specific flags -ASMFLAGS = $(COMMON) -ASMFLAGS += $(CFLAGS) -ASMFLAGS += -x assembler-with-cpp -Wa,-gdwarf2 - -## Linker flags -LDFLAGS = $(COMMON) -LDFLAGS += -Wl,-gc-sections,-Map=DiskLoader.map,--section-start=.text=0x7800,--relax -LDFLAGS += -nodefaultlibs -nostartfiles - - -## Intel Hex file production flags -HEX_EEPROM_FLAGS = -j .eeprom -HEX_EEPROM_FLAGS += --set-section-flags=.eeprom="alloc,load" -HEX_EEPROM_FLAGS += --change-section-lma .eeprom=0 --no-change-warnings - -## Objects explicitly added by the user -LINKONLYOBJECTS = - -MODULES := . -SRC_DIR := $(addprefix src/,$(MODULES)) -BUILD_DIR := $(addprefix build/,$(MODULES)) - -SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.cpp)) -OBJ := $(patsubst src/%.cpp,build/%.o,$(SRC)) -DEP := $(OBJ:%.o=%.d) -INCLUDES := $(addprefix -I,$(SRC_DIR)) - -vpath %.cpp $(SRC_DIR) - -.PHONY: all checkdirs clean - -all: checkdirs $(TARGET) DiskLoader.hex DiskLoader.lss size - --include $(DEP) - -checkdirs: $(BUILD_DIR) - -$(BUILD_DIR): - @mkdir -p $@ - -clean: - @rm -rf build/ - @rm -f *.hex - @rm -f *.elf - @rm -f *.lss - @rm -f *.map - -define make-goal -$1/%.o: %.cpp - $(CC) $(INCLUDES) $(CFLAGS) -c $$< -MD -o $$@ -endef - -$(foreach bdir,$(BUILD_DIR),$(eval $(call make-goal,$(bdir)))) - -$(TARGET): $(OBJ) - $(CC) $(LDFLAGS) $(LINKONLYOBJECTS) $(LIBDIRS) $(LIBS) $^ -o $@ - -%.hex: $(TARGET) - avr-objcopy -O ihex $(HEX_FLASH_FLAGS) $< $@ - -%.lss: $(TARGET) - avr-objdump -h -S $< > $@ - -size: $(TARGET) - @echo -# @avr-size -C --mcu=${MCU} ${TARGET}.elf - -program: $(TARGET).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) -B 5 -u -U flash:w:$(TARGET).hex
\ No newline at end of file diff --git a/bootloaders/diskloader/src/DiskLoader.cpp b/bootloaders/diskloader/src/DiskLoader.cpp deleted file mode 100644 index 6580618..0000000 --- a/bootloaders/diskloader/src/DiskLoader.cpp +++ /dev/null @@ -1,239 +0,0 @@ - - -#include "Platform.h" - -// This bootloader creates a composite Serial device -// -// The serial interface supports a STK500v1 protocol that is very similar to optiboot -// -// The bootloader will timeout and start the firmware after a few hundred milliseconds -// if a usb connection is not detected. -// -// The tweakier code is to keep the bootloader below 2k (no interrupt table, for example) - -extern "C" -void entrypoint(void) __attribute__ ((naked)) __attribute__ ((section (".vectors"))); -void entrypoint(void) -{ - asm volatile ( - "eor r1, r1\n" // Zero register - "out 0x3F, r1\n" // SREG - "ldi r28, 0xFF\n" - "ldi r29, 0x0A\n" - "out 0x3E, r29\n" // SPH - "out 0x3D, r28\n" // SPL - "rjmp main" // Stack is all set up, start the main code - ::); -} - -u8 _flashbuf[128]; -u8 _inSync; -u8 _ok; -extern volatile u8 _ejected; -extern volatile u16 _timeout; - -void Program(u8 ep, u16 page, u8 count) -{ - u8 write = page < 30*1024; // Don't write over firmware please - if (write) - boot_page_erase(page); - - Recv(ep,_flashbuf,count); // Read while page is erasing - - if (!write) - return; - - boot_spm_busy_wait(); // Wait until the memory is erased. - - count >>= 1; - u16* p = (u16*)page; - u16* b = (u16*)_flashbuf; - for (u8 i = 0; i < count; i++) - boot_page_fill(p++, b[i]); - - boot_page_write(page); - boot_spm_busy_wait(); - boot_rww_enable (); -} - - -int USBGetChar(); -#define getch USBGetChar - -#define HW_VER 0x02 -#define SW_MAJOR 0x01 -#define SW_MINOR 0x10 - -#define STK_OK 0x10 -#define STK_INSYNC 0x14 // ' ' -#define CRC_EOP 0x20 // 'SPACE' -#define STK_GET_SYNC 0x30 // '0' - -#define STK_GET_PARAMETER 0x41 // 'A' -#define STK_SET_DEVICE 0x42 // 'B' -#define STK_SET_DEVICE_EXT 0x45 // 'E' -#define STK_LOAD_ADDRESS 0x55 // 'U' -#define STK_UNIVERSAL 0x56 // 'V' -#define STK_PROG_PAGE 0x64 // 'd' -#define STK_READ_PAGE 0x74 // 't' -#define STK_READ_SIGN 0x75 // 'u' - -extern const u8 _readSize[] PROGMEM; -const u8 _readSize[] = -{ - STK_GET_PARAMETER, 1, - STK_SET_DEVICE, 20, - STK_SET_DEVICE_EXT, 5, - STK_UNIVERSAL, 4, - STK_LOAD_ADDRESS, 2, - STK_PROG_PAGE, 3, - STK_READ_PAGE, 3, - 0,0 -}; - -extern const u8 _consts[] PROGMEM; -const u8 _consts[] = -{ - SIGNATURE_0, - SIGNATURE_1, - SIGNATURE_2, - HW_VER, // Hardware version - SW_MAJOR, // Software major version - SW_MINOR, // Software minor version - 0x03, // Unknown but seems to be required by avr studio 3.56 - 0x00, // -}; - - -void USBInit(void); -int main(void) __attribute__ ((naked)); - -// STK500v1 main loop, very similar to optiboot in protocol and implementation -int main() -{ - wdt_disable(); - TXLED0; - RXLED0; - LED0; - BOARD_INIT(); - USBInit(); - - _inSync = STK_INSYNC; - _ok = STK_OK; - - if (pgm_read_word(0) != -1) - _ejected = 1; - - for(;;) - { - u8* packet = _flashbuf; - u16 address = 0; - for (;;) - { - u8 cmd = getch(); - - // Read packet contents - u8 len; - const u8* rs = _readSize; - for(;;) - { - u8 c = pgm_read_byte(rs++); - len = pgm_read_byte(rs++); - if (c == cmd || c == 0) - break; - } - _timeout = 0; - // Read params - Recv(CDC_RX,packet,len); - - // Send a response - u8 send = 0; - const u8* pgm = _consts+7; // 0 - if (STK_GET_PARAMETER == cmd) - { - u8 i = packet[0] - 0x80; - if (i > 2) - i = (i == 0x18) ? 3 : 4; // 0x80:HW_VER,0x81:SW_MAJOR,0x82:SW_MINOR,0x18:3 or 0 - pgm = _consts + i + 3; - send = 1; - } - - else if (STK_UNIVERSAL == cmd) - { - if (packet[0] == 0x30) - pgm = _consts + packet[2]; // read signature - send = 1; - } - - // Read signature bytes - else if (STK_READ_SIGN == cmd) - { - pgm = _consts; - send = 3; - } - - else if (STK_LOAD_ADDRESS == cmd) - { - address = *((u16*)packet); // word addresses - address += address; - } - - else if (STK_PROG_PAGE == cmd) - { - Program(CDC_RX,address,packet[1]); - } - - else if (STK_READ_PAGE == cmd) - { - send = packet[1]; - pgm = (const u8*)address; - address += send; // not sure of this is required - } - - // Check sync - if (getch() != ' ') - break; - Transfer(CDC_TX,&_inSync,1); - - // Send result - if (send) - Transfer(CDC_TX|TRANSFER_PGM,pgm,send); // All from pgm memory - - // Send ok - Transfer(CDC_TX|TRANSFER_RELEASE,&_ok,1); - - if (cmd == 'Q') - break; - } - _timeout = 500; // wait a moment before exiting the bootloader - may need to finish responding to 'Q' for example - _ejected = 1; - } -} - -// Nice breathing LED indicates we are in the firmware -u16 _pulse; -void LEDPulse() -{ - _pulse += 4; - u8 p = _pulse >> 9; - if (p > 63) - p = 127-p; - p += p; - if (((u8)_pulse) > p) - LED0; - else - LED1; -} - -void Reboot() -{ - TXLED0; // switch off the RX and TX LEDs before starting the user sketch - RXLED0; - UDCON = 1; // Detatch USB - UDIEN = 0; - asm volatile ( // Reset vector to run firmware - "clr r30\n" - "clr r31\n" - "ijmp\n" - ::); -} diff --git a/bootloaders/diskloader/src/Platform.h b/bootloaders/diskloader/src/Platform.h deleted file mode 100644 index 04c5b79..0000000 --- a/bootloaders/diskloader/src/Platform.h +++ /dev/null @@ -1,51 +0,0 @@ - -#include <inttypes.h> -#include <avr/io.h> -#include <avr/pgmspace.h> -#include <avr/boot.h> -#include <util/delay.h> -#include <avr/interrupt.h> -#include <avr/wdt.h> - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -typedef unsigned char u8; -typedef unsigned short u16; -typedef unsigned long u32; - - -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) -#define DISABLE_JTAG() MCUCR = (1 << JTD) | (1 << IVCE) | (0 << PUD); MCUCR = (1 << JTD) | (0 << IVSEL) | (0 << IVCE) | (0 << PUD); - -#define USB_PID_LEONARDO 0x0034 -#define USB_PID_MICRO 0x0035 -#define USB_VID 0x2341 // arduino LLC vid -#define USB_PID ARDUINO_MODEL_PID // passed in by Makefile - 0x0034 for Leonardo, 0x0035 for MIcro - -#define USB_SERIAL_STRING '0','0','0','0','0','0','0','0','1','7','0','1' - -#define OEM_NAME 'l','e','o','n','a','r','d','o' // 8 chars -#define BOARD_INIT() DDRC |= (1<<7); DDRB |= (1<<0); DDRD |= (1<<5); CPU_PRESCALE(0); DISABLE_JTAG(); -#define LED0 PORTC &= ~(1<<7) -#define LED1 PORTC |= (1<<7) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -#define TRANSFER_PGM 0x80 -#define TRANSFER_RELEASE 0x40 -#define TRANSFER_ZERO 0x20 - -void Transfer(u8 ep, const u8* data, int len); -void Recv(u8 ep, u8* dst, u8 len); -void Program(u8 ep, u16 page, u8 count); - -#define CDC_ENABLED - -#include "USBCore.h" -#include "USBDesc.h" - - diff --git a/bootloaders/diskloader/src/USBCore.cpp b/bootloaders/diskloader/src/USBCore.cpp deleted file mode 100644 index 208121e..0000000 --- a/bootloaders/diskloader/src/USBCore.cpp +++ /dev/null @@ -1,510 +0,0 @@ - - -/* Copyright (c) 2010, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" - -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT - -#define EP_TYPE_CONTROL 0x00 -#define EP_TYPE_BULK_IN 0x81 -#define EP_TYPE_BULK_OUT 0x80 -#define EP_TYPE_INTERRUPT_IN 0xC1 -#define EP_TYPE_INTERRUPT_OUT 0xC0 -#define EP_TYPE_ISOCHRONOUS_IN 0x41 -#define EP_TYPE_ISOCHRONOUS_OUT 0x40 - -/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ -#define TX_RX_LED_PULSE_MS 100 -u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ -u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ - -void Reboot(); - -//================================================================== -//================================================================== - -typedef struct -{ - u32 dwDTERate; - u8 bCharFormat; - u8 bParityType; - u8 bDataBits; - u8 lineState; -} LineInfo; - -static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; - -//================================================================== -//================================================================== - -// 4 bytes of RAM -volatile u8 _usbConfiguration; -volatile u8 _ejected; -volatile u16 _timeout; - -static inline void WaitIN(void) -{ - while (!(UEINTX & (1<<TXINI))); -} - -static inline void ClearIN(void) -{ - UEINTX = ~(1<<TXINI); -} - -static inline void WaitOUT(void) -{ - while (!(UEINTX & (1<<RXOUTI))) - ; -} - -static inline u8 WaitForINOrOUT() -{ - while (!(UEINTX & ((1<<TXINI)|(1<<RXOUTI)))) - ; - return (UEINTX & (1<<RXOUTI)) == 0; -} - -static inline void ClearOUT(void) -{ - UEINTX = ~(1<<RXOUTI); -} - -static -void Send(volatile const u8* data, u8 count) -{ - TXLED1; // light the TX LED - TxLEDPulse = TX_RX_LED_PULSE_MS; - while (count--) - UEDATX = *data++; -} - -void Recv(volatile u8* data, u8 count) -{ - RXLED1; // light the RX LED - RxLEDPulse = TX_RX_LED_PULSE_MS; - while (count--) - *data++ = UEDATX; -} - -static inline u8 Recv8() -{ - RXLED1; // light the RX LED - RxLEDPulse = TX_RX_LED_PULSE_MS; - return UEDATX; -} - -static inline void Send8(u8 d) -{ - TXLED1; // light the TX LED - TxLEDPulse = TX_RX_LED_PULSE_MS; - UEDATX = d; -} - -static inline void SetEP(u8 ep) -{ - UENUM = ep; -} - -static inline u8 FifoByteCount() -{ - return UEBCLX; -} - -static inline u8 ReceivedSetupInt() -{ - return UEINTX & (1<<RXSTPI); -} - -static inline void ClearSetupInt() -{ - UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI)); -} - -static inline void Stall() -{ - UECONX = (1<<STALLRQ) | (1<<EPEN); -} - -static inline u8 ReadWriteAllowed() -{ - return UEINTX & (1<<RWAL); -} - -static inline u8 Stalled() -{ - return UEINTX & (1<<STALLEDI); -} - -static inline u8 FifoFree() -{ - return UEINTX & (1<<FIFOCON); -} - -static inline void ReleaseRX() -{ - UEINTX = 0x6B; // FIFOCON=0 NAKINI=1 RWAL=1 NAKOUTI=0 RXSTPI=1 RXOUTI=0 STALLEDI=1 TXINI=1 -} - -static inline void ReleaseTX() -{ - UEINTX = 0x3A; // FIFOCON=0 NAKINI=0 RWAL=1 NAKOUTI=1 RXSTPI=1 RXOUTI=0 STALLEDI=1 TXINI=0 -} - -static inline u8 FrameNumber() -{ - return UDFNUML; -} - -//================================================================== -//================================================================== - -#define EP_SINGLE_64 0x32 // EP0 -#define EP_DOUBLE_64 0x36 // Other endpoints - -static void InitEP(u8 index, u8 type, u8 size) -{ - UENUM = index; - UECONX = 1; - UECFG0X = type; - UECFG1X = size; -} - -// API -void USBInit(void) -{ - _timeout = 0; - _usbConfiguration = 0; - _ejected = 0; - - UHWCON = 0x01; // power internal reg (don't need this?) - USBCON = (1<<USBE)|(1<<FRZCLK); // clock frozen, usb enabled - PLLCSR = 0x12; // Need 16 MHz xtal - while (!(PLLCSR & (1<<PLOCK))) // wait for lock pll - ; - USBCON = ((1<<USBE)|(1<<OTGPADE)); // start USB clock - UDCON = 0; // enable attach resistor -} - -u8 USBGetConfiguration(void) -{ - return _usbConfiguration; -} - -u8 HasData(u8 ep) -{ - SetEP(ep); - return ReadWriteAllowed(); // count in fifo -} - -int USBGetChar(); -void Recv(u8 ep, u8* dst, u8 len) -{ - SetEP(ep); - while (len--) - { - while (!ReadWriteAllowed()) - ; - *dst++ = Recv8(); - if (!ReadWriteAllowed()) // release empty buffer - ReleaseRX(); - } -} - -// Transmit a packet to endpoint -void Transfer(u8 ep, const u8* data, int len) -{ - u8 zero = ep & TRANSFER_ZERO; - SetEP(ep & 7); - while (len--) - { - while (!ReadWriteAllowed()) - ; // TODO Check for STALL etc - - u8 d = (ep & TRANSFER_PGM) ? pgm_read_byte(data) : data[0]; - data++; - if (zero) - d = 0; - Send8(d); - - if (!ReadWriteAllowed()) - ReleaseTX(); - } - if (ep & TRANSFER_RELEASE) - ReleaseTX(); -} - -extern const u8 _initEndpoints[] PROGMEM; -const u8 _initEndpoints[] = -{ - 0, - -#ifdef CDC_ENABLED - EP_TYPE_INTERRUPT_IN, // CDC_ENDPOINT_ACM - EP_TYPE_BULK_OUT, // CDC_ENDPOINT_OUT - EP_TYPE_BULK_IN, // CDC_ENDPOINT_IN -#endif - - EP_TYPE_INTERRUPT_IN, // HID_ENDPOINT_INT -}; - -static void InitEndpoints() -{ - for (u8 i = 1; i < sizeof(_initEndpoints); i++) - { - UENUM = i; - UECONX = 1; - UECFG0X = pgm_read_byte(_initEndpoints+i); - UECFG1X = EP_DOUBLE_64; - } - UERST = 0x7E; // And reset them - UERST = 0; -} - -typedef struct -{ - u8 bmRequestType; - u8 bRequest; - u8 wValueL; - u8 wValueH; - u16 wIndex; - u16 wLength; -} Setup; -Setup _setup; - -//bool USBHook(Setup& setup) -bool USBHook() -{ - Setup& setup = _setup; - u8 r = setup.bRequest; - - // CDC Requests - if (CDC_GET_LINE_CODING == r) - { - Send((const volatile u8*)&_usbLineInfo,7); - } - - else if (CDC_SET_LINE_CODING == r) - { - WaitOUT(); - Recv((volatile u8*)&_usbLineInfo,7); - ClearOUT(); - } - - else if (CDC_SET_CONTROL_LINE_STATE == r) - { - _usbLineInfo.lineState = setup.wValueL; - } - - return true; -} - -extern const u8 _rawHID[] PROGMEM; -#define LSB(_x) ((_x) & 0xFF) -#define MSB(_x) ((_x) >> 8) - -#define RAWHID_USAGE_PAGE 0xFFC0 -#define RAWHID_USAGE 0x0C00 -#define RAWHID_TX_SIZE 64 -#define RAWHID_RX_SIZE 64 - -const u8 _rawHID[] = -{ - // RAW HID - 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 - 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), - - 0xA1, 0x01, // Collection 0x01 - 0x85, 0x03, // REPORT_ID (3) - 0x75, 0x08, // report size = 8 bits - 0x15, 0x00, // logical minimum = 0 - 0x26, 0xFF, 0x00, // logical maximum = 255 - - 0x95, 64, // report count TX - 0x09, 0x01, // usage - 0x81, 0x02, // Input (array) - - 0x95, 64, // report count RX - 0x09, 0x02, // usage - 0x91, 0x02, // Output (array) - 0xC0 // end collection -}; - -u8 _cdcComposite = 0; - -bool SendDescriptor() -{ - Setup& setup = _setup; - u8 desc_length = 0; - const u8* desc_addr = 0; - - u8 t = setup.wValueH; - if (0x22 == t) - { - desc_addr = _rawHID; - desc_length = sizeof(desc_length); - } else if (USB_DEVICE_DESCRIPTOR_TYPE == t) - { - if (setup.wLength == 8) - _cdcComposite = 1; - desc_addr = _cdcComposite ? (const u8*)&USB_DeviceDescriptorA : (const u8*)&USB_DeviceDescriptor; - } - else if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t) - { - desc_addr = (const u8*)&USB_ConfigDescriptor; - desc_length = sizeof(USB_ConfigDescriptor); - } - else if (USB_STRING_DESCRIPTOR_TYPE == t) - { - if (setup.wValueL == 0) - desc_addr = (const u8*)&STRING_LANGUAGE; - else if (setup.wValueL == IPRODUCT) - desc_addr = (const u8*)&STRING_IPRODUCT; - else if (setup.wValueL == ISERIAL) - desc_addr = (const u8*)&STRING_SERIAL; - else if (setup.wValueL == IMANUFACTURER) - desc_addr = (const u8*)&STRING_IMANUFACTURER; - else - return false; - } else - return false; - - if (desc_length == 0) - desc_length = pgm_read_byte(desc_addr); - if ((u8)setup.wLength < desc_length) // bit of a cheat limiting to 255 bytes TODO (saved 8 bytes) - desc_length = (u8)setup.wLength; - - // Send descriptor - // EP0 is 64 bytes long - // RWAL and FIFOCON don't work on EP0 - u8 n = 0; - do - { - if (!WaitForINOrOUT()) - return false; - Send8(pgm_read_byte(&desc_addr[n++])); - u8 clr = n & 0x3F; - if (!clr) - ClearIN(); // Fifo is full, release this packet - } while (n < desc_length); - return true; -} - -void USBSetupInterrupt() -{ - SetEP(0); - if (!ReceivedSetupInt()) - return; - - Setup& setup = _setup; // global saves ~30 bytes - Recv((u8*)&setup,8); - ClearSetupInt(); - - if (setup.bmRequestType & DEVICETOHOST) - WaitIN(); - else - ClearIN(); - - bool ok = true; - u8 r = setup.bRequest; - if (SET_ADDRESS == r) - { - WaitIN(); - UDADDR = setup.wValueL | (1<<ADDEN); - } - else if (SET_CONFIGURATION == r) - { - _usbConfiguration = setup.wValueL; - InitEndpoints(); - } - else if (GET_CONFIGURATION == r) - { - Send8(_usbConfiguration); - } - else if (GET_STATUS == r) - { - Send8(0); // All good as far as I know - } - else if (GET_DESCRIPTOR == r) - { - ok = SendDescriptor(); - } - else - { - ok = USBHook(); - } - - if (ok) - ClearIN(); - else - Stall(); -} - -void USBGeneralInterrupt() -{ - u8 udint = UDINT; - UDINT = 0; - - // End of Reset - if (udint & (1<<EORSTI)) - { - InitEP(0,EP_TYPE_CONTROL,EP_SINGLE_64); // init ep0 - _usbConfiguration = 0; // not configured yet - } - - // Start of Frame - happens every millisecond so we use it for TX and RX LED one-shot timing, too - if (udint & (1<<SOFI)) - { - // check whether the one-shot period has elapsed. if so, turn off the LED - if (TxLEDPulse && !(--TxLEDPulse)) - TXLED0; - if (RxLEDPulse && !(--RxLEDPulse)) - RXLED0; - - if (!_ejected) - _timeout = 0; - } -} - -void LEDPulse(); -int USBGetChar() -{ - for(;;) - { - USBSetupInterrupt(); - USBGeneralInterrupt(); - - // Read a char - if (HasData(CDC_RX)) - { - u8 c = Recv8(); - if (!ReadWriteAllowed()) - ReleaseRX(); - return c; - } - - if (!--_timeout) { - Reboot(); // USB not connected, run firmware - } - - _delay_us(100); // stretch out the bootloader period to about 5 seconds after enumeration - LEDPulse(); - } - return -1; -} diff --git a/bootloaders/diskloader/src/USBCore.h b/bootloaders/diskloader/src/USBCore.h deleted file mode 100644 index 537c0ec..0000000 --- a/bootloaders/diskloader/src/USBCore.h +++ /dev/null @@ -1,246 +0,0 @@ - -// Copyright (c) 2010, Peter Barrett -/* -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#ifndef __USBCORE_H__ -#define __USBCORE_H__ - -#define GET_STATUS 0 -#define CLEAR_FEATURE 1 -#define SET_FEATURE 3 -#define SET_ADDRESS 5 -#define GET_DESCRIPTOR 6 -#define GET_CONFIGURATION 8 -#define SET_CONFIGURATION 9 -#define GET_INTERFACE 10 -#define SET_INTERFACE 11 - -// bmRequestType -#define HOSTTODEVICE 0x00 -#define DEVICETOHOST 0x80 -#define STANDARD 0x00 -#define CLASS 0x20 -#define VENDOR 0x40 -#define DEVICE 0x00 -#define INTERFACE 0x01 -#define ENDPOINT 0x02 -#define OTHER 0x03 - -#define CDC_SET_LINE_CODING 0x20 -#define CDC_GET_LINE_CODING 0x21 -#define CDC_SET_CONTROL_LINE_STATE 0x22 - -// Descriptors - -#define USB_DEVICE_DESC_SIZE 18 -#define USB_CONFIGUARTION_DESC_SIZE 9 -#define USB_INTERFACE_DESC_SIZE 9 -#define USB_ENDPOINT_DESC_SIZE 7 - -#define USB_DEVICE_DESCRIPTOR_TYPE 1 -#define USB_CONFIGURATION_DESCRIPTOR_TYPE 2 -#define USB_STRING_DESCRIPTOR_TYPE 3 -#define USB_INTERFACE_DESCRIPTOR_TYPE 4 -#define USB_ENDPOINT_DESCRIPTOR_TYPE 5 - -#define USB_DEVICE_CLASS_COMMUNICATIONS 0x02 -#define USB_DEVICE_CLASS_HUMAN_INTERFACE 0x03 -#define USB_DEVICE_CLASS_STORAGE 0x08 -#define USB_DEVICE_CLASS_VENDOR_SPECIFIC 0xFF - -#define USB_CONFIG_POWERED_MASK 0x40 -#define USB_CONFIG_BUS_POWERED 0x80 -#define USB_CONFIG_SELF_POWERED 0xC0 -#define USB_CONFIG_REMOTE_WAKEUP 0x20 - -// bMaxPower in Configuration Descriptor -#define USB_CONFIG_POWER_MA(mA) ((mA)/2) - -// bEndpointAddress in Endpoint Descriptor -#define USB_ENDPOINT_DIRECTION_MASK 0x80 -#define USB_ENDPOINT_OUT(addr) ((addr) | 0x00) -#define USB_ENDPOINT_IN(addr) ((addr) | 0x80) - -#define USB_ENDPOINT_TYPE_MASK 0x03 -#define USB_ENDPOINT_TYPE_CONTROL 0x00 -#define USB_ENDPOINT_TYPE_ISOCHRONOUS 0x01 -#define USB_ENDPOINT_TYPE_BULK 0x02 -#define USB_ENDPOINT_TYPE_INTERRUPT 0x03 - -#define TOBYTES(x) ((x) & 0xFF),(((x) >> 8) & 0xFF) - -#define CDC_V1_10 0x0110 -#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02 - -#define CDC_CALL_MANAGEMENT 0x01 -#define CDC_ABSTRACT_CONTROL_MODEL 0x02 -#define CDC_HEADER 0x00 -#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02 -#define CDC_UNION 0x06 -#define CDC_CS_INTERFACE 0x24 -#define CDC_CS_ENDPOINT 0x25 -#define CDC_DATA_INTERFACE_CLASS 0x0A - - -// Device -typedef struct { - u8 len; // 18 - u8 dtype; // 1 USB_DEVICE_DESCRIPTOR_TYPE - u16 usbVersion; // 0x200 - u8 deviceClass; - u8 deviceSubClass; - u8 deviceProtocol; - u8 packetSize0; // Packet 0 - u16 idVendor; - u16 idProduct; - u16 deviceVersion; // 0x100 - u8 iManufacturer; - u8 iProduct; - u8 iSerialNumber; - u8 bNumConfigurations; -} DeviceDescriptor; - -// Config -typedef struct { - u8 len; // 9 - u8 dtype; // 2 - u16 clen; // total length - u8 numInterfaces; - u8 config; - u8 iconfig; - u8 attributes; - u8 maxPower; -} ConfigDescriptor; - -// String - -// Interface -typedef struct -{ - u8 len; // 9 - u8 dtype; // 4 - u8 number; - u8 alternate; - u8 numEndpoints; - u8 interfaceClass; - u8 interfaceSubClass; - u8 protocol; - u8 iInterface; -} InterfaceDescriptor; - -// Endpoint -typedef struct -{ - u8 len; // 7 - u8 dtype; // 5 - u8 addr; - u8 attr; - u16 packetSize; - u8 interval; -} EndpointDescriptor; - -// Interface Association Descriptor -// Used to bind 2 interfaces together in CDC compostite device -typedef struct -{ - u8 len; // 8 - u8 dtype; // 11 - u8 firstInterface; - u8 interfaceCount; - u8 functionClass; - u8 funtionSubClass; - u8 functionProtocol; - u8 iInterface; -} IADDescriptor; - -// CDC CS interface descriptor -typedef struct -{ - u8 len; // 5 - u8 dtype; // 0x24 - u8 subtype; - u8 d0; - u8 d1; -} CDCCSInterfaceDescriptor; - -typedef struct -{ - u8 len; // 4 - u8 dtype; // 0x24 - u8 subtype; - u8 d0; -} CDCCSInterfaceDescriptor4; - -typedef struct -{ - IADDescriptor iad; // Only needed on compound device - - // Control - InterfaceDescriptor cif; // - CDCCSInterfaceDescriptor header; - CDCCSInterfaceDescriptor callManagement; - CDCCSInterfaceDescriptor4 controlManagement; - CDCCSInterfaceDescriptor functionalDescriptor; - EndpointDescriptor cifin; - - // Data - InterfaceDescriptor dif; - EndpointDescriptor in; - EndpointDescriptor out; -} CDCDescriptor; - -typedef struct -{ - u8 len; // 9 - u8 dtype; // 0x21 - u8 addr; - u8 versionL; // 0x101 - u8 versionH; // 0x101 - u8 country; - u8 desctype; // 0x22 report - u8 descLenL; - u8 descLenH; -} HIDDescDescriptor; - -typedef struct -{ - InterfaceDescriptor hid; - HIDDescDescriptor desc; - EndpointDescriptor in; -} HIDDescriptor; - -#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \ - { 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs } - -#define D_CONFIG(_totalLength,_interfaces) \ - { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(100) } - -#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \ - { 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 } - -#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \ - { 7, 5, _addr,_attr,_packetSize, _interval } - -#define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \ - { 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 } - -#define D_HIDREPORT(_descriptorLength) \ - { 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 } - -#define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 } -#define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 } - -#endif
\ No newline at end of file diff --git a/bootloaders/diskloader/src/USBDesc.cpp b/bootloaders/diskloader/src/USBDesc.cpp deleted file mode 100644 index ade072a..0000000 --- a/bootloaders/diskloader/src/USBDesc.cpp +++ /dev/null @@ -1,87 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - -#include "Platform.h" - -//==================================================================================================== -//==================================================================================================== -// Actual device descriptors - -const u16 STRING_LANGUAGE[2] = { - (3<<8) | (2+2), - 0x0409 // English -}; - -const u16 STRING_SERIAL[13] = { - (3<<8) | (2+2*12), - USB_SERIAL_STRING -}; - -const u16 STRING_IPRODUCT[28] = { - (3<<8) | (2+2*27), -#if USB_PID == USB_PID_LEONARDO - 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o',' ','b','o','o','t','l','o','a','d','e','r' -#elif USB_PID == USB_PID_MICRO - 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ','b','o','o','t','l','o','a','d','e','r',' ',' ',' ' -#endif -}; - -const u16 STRING_IMANUFACTURER[12] = { - (3<<8) | (2+2*11), - 'A','r','d','u','i','n','o',' ','L','L','C' -}; - - -//#ifdef CDC_ENABLED -DeviceDescriptor USB_DeviceDescriptorA = D_DEVICE(0X02,0X00,0X00,64,USB_VID,USB_PID,0x100,0,IPRODUCT,ISERIAL,1); -//#else -DeviceDescriptor USB_DeviceDescriptor = D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,0,IPRODUCT,ISERIAL,1); -//#endif - - -Config USB_ConfigDescriptor = -{ - D_CONFIG(sizeof(Config),INTERFACE_COUNT), - -#ifdef CDC_ENABLED - // CDC - { - D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), - - // CDC communication interface - D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), - D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) - D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management - D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,2), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported - D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), - - // CDC data interface - D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), - D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), - D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) - }, -#endif - // HID - { - D_INTERFACE(HID_INTERFACE,1,3,0,0), - D_HIDREPORT(30), - D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x40) - } -}; - diff --git a/bootloaders/diskloader/src/USBDesc.h b/bootloaders/diskloader/src/USBDesc.h deleted file mode 100644 index a970fa4..0000000 --- a/bootloaders/diskloader/src/USBDesc.h +++ /dev/null @@ -1,65 +0,0 @@ - - -/* Copyright (c) 2011, Peter Barrett -** -** Permission to use, copy, modify, and/or distribute this software for -** any purpose with or without fee is hereby granted, provided that the -** above copyright notice and this permission notice appear in all copies. -** -** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL -** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED -** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR -** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES -** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -** SOFTWARE. -*/ - - -#ifdef CDC_ENABLED - -#define CDC_ACM_INTERFACE 0 // CDC ACM -#define CDC_DATA_INTERFACE 1 // CDC Data -#define CDC_ENDPOINT_ACM 1 -#define CDC_ENDPOINT_OUT 2 -#define CDC_ENDPOINT_IN 3 - -#define HID_INTERFACE 2 // HID Interface -#define HID_ENDPOINT_INT 4 - -#define INTERFACE_COUNT 3 // 2 for cdc + 1 for hid - -#else - -#define HID_INTERFACE 2 // HID Interface -#define HID_ENDPOINT_INT 4 - -#define INTERFACE_COUNT 1 // 1 for hid - -#endif - -typedef struct -{ - ConfigDescriptor config; -#ifdef CDC_ENABLED - CDCDescriptor cdc; -#endif - HIDDescriptor hid; -} Config; - -extern Config USB_ConfigDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptor PROGMEM; -extern DeviceDescriptor USB_DeviceDescriptorA PROGMEM; - -extern const u16 STRING_LANGUAGE[2] PROGMEM; -extern const u16 STRING_IPRODUCT[28] PROGMEM; -extern const u16 STRING_IMANUFACTURER[12] PROGMEM; -extern const u16 STRING_SERIAL[13] PROGMEM; - -#define IMANUFACTURER 1 -#define IPRODUCT 2 -#define ISERIAL 3 - -#define CDC_TX CDC_ENDPOINT_IN -#define CDC_RX CDC_ENDPOINT_OUT
\ No newline at end of file diff --git a/cores/arduino/CDC.cpp b/cores/arduino/CDC.cpp index 14a0eae..1ee3a48 100644 --- a/cores/arduino/CDC.cpp +++ b/cores/arduino/CDC.cpp @@ -23,12 +23,20 @@ #if defined(USBCON) #ifdef CDC_ENABLED -void Reboot() +#if (RAMEND < 1000) +#define SERIAL_BUFFER_SIZE 16 +#else +#define SERIAL_BUFFER_SIZE 64 +#endif + +struct ring_buffer { - USB.detach(); - cli(); - asm volatile("jmp 0x7800"); // jump to bootloader - DiskLoader takes up last 2 kB -} + unsigned char buffer[SERIAL_BUFFER_SIZE]; + volatile int head; + volatile int tail; +}; + +ring_buffer cdc_rx_buffer = { { 0 }, 0, 0}; typedef struct { @@ -92,9 +100,28 @@ bool WEAK CDC_Setup(Setup& setup) if (CDC_SET_CONTROL_LINE_STATE == r) { - if (0 != _usbLineInfo.lineState && 1200 == _usbLineInfo.dwDTERate) // auto-reset is triggered when the port, already open at 1200 bps, is closed - Reboot(); _usbLineInfo.lineState = setup.wValueL; + + // auto-reset into the bootloader is triggered when the port, already + // open at 1200 bps, is closed. this is the signal to start the watchdog + // with a relatively long period so it can finish housekeeping tasks + // like servicing endpoints before the sketch ends + if (1200 == _usbLineInfo.dwDTERate) { + // We check DTR state to determine if host port is open (bit 0 of lineState). + if ((_usbLineInfo.lineState & 0x01) == 0) { + *(uint16_t *)0x0800 = 0x7777; + wdt_enable(WDTO_120MS); + } else { + // Most OSs do some intermediate steps when configuring ports and DTR can + // twiggle more than once before stabilizing. + // To avoid spurious resets we set the watchdog to 250ms and eventually + // cancel if DTR goes back high. + + wdt_disable(); + wdt_reset(); + *(uint16_t *)0x0800 = 0x0; + } + } return true; } } @@ -111,33 +138,49 @@ void Serial_::end(void) { } +void Serial_::accept(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + int c = USB_Recv(CDC_RX); + int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != buffer->tail) { + buffer->buffer[buffer->head] = c; + buffer->head = i; + } +} + int Serial_::available(void) { - u8 avail = USB_Available(CDC_RX); - if (_serialPeek != -1) - avail++; - return avail; + ring_buffer *buffer = &cdc_rx_buffer; + return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE; } -// peek is nasty int Serial_::peek(void) { - if (_serialPeek == -1) - _serialPeek = read(); - return _serialPeek; + ring_buffer *buffer = &cdc_rx_buffer; + if (buffer->head == buffer->tail) { + return -1; + } else { + return buffer->buffer[buffer->tail]; + } } int Serial_::read(void) { - int c; - if (_serialPeek != -1) - { - c = _serialPeek; - _serialPeek = -1; + ring_buffer *buffer = &cdc_rx_buffer; + // if the head isn't ahead of the tail, we don't have any characters + if (buffer->head == buffer->tail) { + return -1; } else { - c = USB_Recv(CDC_RX); - } - return c; + unsigned char c = buffer->buffer[buffer->tail]; + buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE; + return c; + } } void Serial_::flush(void) @@ -169,7 +212,22 @@ size_t Serial_::write(uint8_t c) return 0; } +// This operator is a convenient way for a sketch to check whether the +// port has actually been configured and opened by the host (as opposed +// to just being connected to the host). It can be used, for example, in +// setup() before printing to ensure that an application on the host is +// actually ready to receive and display the data. +// We add a short delay before returning to fix a bug observed by Federico +// where the port is configured (lineState != 0) but not quite opened. +Serial_::operator bool() { + bool result = false; + if (_usbLineInfo.lineState > 0) + result = true; + delay(10); + return result; +} + Serial_ Serial; #endif -#endif /* if defined(USBCON) */
\ No newline at end of file +#endif /* if defined(USBCON) */ diff --git a/cores/arduino/HID.cpp b/cores/arduino/HID.cpp index 8ed1566..ac63608 100644 --- a/cores/arduino/HID.cpp +++ b/cores/arduino/HID.cpp @@ -144,7 +144,6 @@ u8 _hid_protocol = 1; u8 _hid_idle = 1; #define WEAK __attribute__ ((weak)) -#define WEAK int WEAK HID_GetInterface(u8* interfaceNum) { @@ -202,7 +201,15 @@ bool WEAK HID_Setup(Setup& setup) //================================================================================ // Mouse -Mouse_::Mouse_() : _buttons(0) +Mouse_::Mouse_(void) : _buttons(0) +{ +} + +void Mouse_::begin(void) +{ +} + +void Mouse_::end(void) { } @@ -245,7 +252,7 @@ void Mouse_::release(uint8_t b) bool Mouse_::isPressed(uint8_t b) { - if (b & _buttons > 0) + if ((b & _buttons) > 0) return true; return false; } @@ -254,18 +261,21 @@ bool Mouse_::isPressed(uint8_t b) //================================================================================ // Keyboard -Keyboard_::Keyboard_() : _keyMap(0) +Keyboard_::Keyboard_(void) { } -void Keyboard_::sendReport(KeyReport* keys) +void Keyboard_::begin(void) +{ +} + +void Keyboard_::end(void) { - HID_SendReport(2,keys,sizeof(KeyReport)); } -void Keyboard_::setKeyMap(KeyMap* keyMap) +void Keyboard_::sendReport(KeyReport* keys) { - _keyMap = keyMap; + HID_SendReport(2,keys,sizeof(KeyReport)); } extern @@ -406,41 +416,105 @@ const uint8_t _asciimap[128] = }; uint8_t USBPutChar(uint8_t c); -size_t Keyboard_::write(uint8_t c) + +// press() adds the specified key (printing, non-printing, or modifier) +// to the persistent key report and sends the report. Because of the way +// USB HID works, the host acts like the key remains pressed until we +// call release(), releaseAll(), or otherwise clear the report and resend. +size_t Keyboard_::press(uint8_t k) { - // Keydown - { - KeyReport keys = {0}; - if (_keyMap) - _keyMap->charToKey(c,&keys); - else - { - if (c >= 128) { - setWriteError(); - return 0; - } - c = pgm_read_byte(_asciimap + c); - if (!c) { - setWriteError(); - return 0; - } - if (c & 0x80) - { - keys.modifiers |= KEY_MODIFIER_LEFT_SHIFT; - c &= 0x7F; + uint8_t i; + if (k >= 136) { // it's a non-printing key (not a modifier) + k = k - 136; + } else if (k >= 128) { // it's a modifier key + _keyReport.modifiers |= (1<<(k-128)); + k = 0; + } else { // it's a printing key + k = pgm_read_byte(_asciimap + k); + if (!k) { + setWriteError(); + return 0; + } + if (k & 0x80) { // it's a capital letter or other character reached with shift + _keyReport.modifiers |= 0x02; // the left shift modifier + k &= 0x7F; + } + } + + // Add k to the key report only if it's not already present + // and if there is an empty slot. + if (_keyReport.keys[0] != k && _keyReport.keys[1] != k && + _keyReport.keys[2] != k && _keyReport.keys[3] != k && + _keyReport.keys[4] != k && _keyReport.keys[5] != k) { + + for (i=0; i<6; i++) { + if (_keyReport.keys[i] == 0x00) { + _keyReport.keys[i] = k; + break; } - keys.keys[0] = c; } - sendReport(&keys); + if (i == 6) { + setWriteError(); + return 0; + } } - // Keyup - { - KeyReport keys = {0}; - sendReport(&keys); + sendReport(&_keyReport); + return 1; +} + +// release() takes the specified key out of the persistent key report and +// sends the report. This tells the OS the key is no longer pressed and that +// it shouldn't be repeated any more. +size_t Keyboard_::release(uint8_t k) +{ + uint8_t i; + if (k >= 136) { // it's a non-printing key (not a modifier) + k = k - 136; + } else if (k >= 128) { // it's a modifier key + _keyReport.modifiers &= ~(1<<(k-128)); + k = 0; + } else { // it's a printing key + k = pgm_read_byte(_asciimap + k); + if (!k) { + return 0; + } + if (k & 0x80) { // it's a capital letter or other character reached with shift + _keyReport.modifiers &= ~(0x02); // the left shift modifier + k &= 0x7F; + } } + + // Test the key report to see if k is present. Clear it if it exists. + // Check all positions in case the key is present more than once (which it shouldn't be) + for (i=0; i<6; i++) { + if (0 != k && _keyReport.keys[i] == k) { + _keyReport.keys[i] = 0x00; + } + } + + sendReport(&_keyReport); return 1; } +void Keyboard_::releaseAll(void) +{ + _keyReport.keys[0] = 0; + _keyReport.keys[1] = 0; + _keyReport.keys[2] = 0; + _keyReport.keys[3] = 0; + _keyReport.keys[4] = 0; + _keyReport.keys[5] = 0; + _keyReport.modifiers = 0; + sendReport(&_keyReport); +} + +size_t Keyboard_::write(uint8_t c) +{ + uint8_t p = press(c); // Keydown + uint8_t r = release(c); // Keyup + return (p); // just return the result of press() since release() almost always returns 1 +} + #endif #endif /* if defined(USBCON) */
\ No newline at end of file diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp index 9985b78..f40ddee 100644 --- a/cores/arduino/HardwareSerial.cpp +++ b/cores/arduino/HardwareSerial.cpp @@ -398,6 +398,10 @@ size_t HardwareSerial::write(uint8_t c) return 1; } +HardwareSerial::operator bool() { + return true; +} + // Preinstantiate Objects ////////////////////////////////////////////////////// #if defined(UBRRH) && defined(UBRRL) diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h index 176abe1..bf4924c 100644 --- a/cores/arduino/HardwareSerial.h +++ b/cores/arduino/HardwareSerial.h @@ -57,6 +57,7 @@ class HardwareSerial : public Stream virtual void flush(void); virtual size_t write(uint8_t); using Print::write; // pull in write(str) and write(buf, size) from Print + operator bool(); }; #if defined(UBRRH) || defined(UBRR0H) diff --git a/cores/arduino/Stream.cpp b/cores/arduino/Stream.cpp index 3d5b905..aafb7fc 100644 --- a/cores/arduino/Stream.cpp +++ b/cores/arduino/Stream.cpp @@ -244,3 +244,27 @@ size_t Stream::readBytesUntil(char terminator, char *buffer, size_t length) return index; // return number of characters, not including null terminator } +String Stream::readString() +{ + String ret; + int c = timedRead(); + while (c >= 0) + { + ret += (char)c; + c = timedRead(); + } + return ret; +} + +String Stream::readStringUntil(char terminator) +{ + String ret; + int c = timedRead(); + while (c >= 0 && c != terminator) + { + ret += (char)c; + c = timedRead(); + } + return ret; +} + diff --git a/cores/arduino/Stream.h b/cores/arduino/Stream.h index 13f11be..58bbf75 100644 --- a/cores/arduino/Stream.h +++ b/cores/arduino/Stream.h @@ -82,6 +82,8 @@ class Stream : public Print // returns the number of characters placed in the buffer (0 means no valid data found) // Arduino String functions to be added here + String readString(); + String readStringUntil(char terminator); protected: long parseInt(char skipChar); // as above but the given skipChar is ignored diff --git a/cores/arduino/USBAPI.h b/cores/arduino/USBAPI.h index 26a2032..d5abdb6 100644 --- a/cores/arduino/USBAPI.h +++ b/cores/arduino/USBAPI.h @@ -9,17 +9,17 @@ //================================================================================ // USB -class USB_ +class USBDevice_ { public: - USB_(); + USBDevice_(); bool configured(); void attach(); void detach(); // Serial port goes down too... void poll(); }; -extern USB_ USB; +extern USBDevice_ USBDevice; //================================================================================ //================================================================================ @@ -27,15 +27,19 @@ extern USB_ USB; class Serial_ : public Stream { +private: + ring_buffer *_cdc_rx_buffer; public: void begin(uint16_t baud_count); void end(void); virtual int available(void); + virtual void accept(void); virtual int peek(void); virtual int read(void); virtual void flush(void); virtual size_t write(uint8_t); + operator bool(); }; extern Serial_ Serial; @@ -54,12 +58,14 @@ private: uint8_t _buttons; void buttons(uint8_t b); public: - Mouse_(); + Mouse_(void); + void begin(void); + void end(void); void click(uint8_t b = MOUSE_LEFT); void move(signed char x, signed char y, signed char wheel = 0); void press(uint8_t b = MOUSE_LEFT); // press LEFT by default void release(uint8_t b = MOUSE_LEFT); // release LEFT by default - bool isPressed(uint8_t b = MOUSE_ALL); // check all buttons by default + bool isPressed(uint8_t b = MOUSE_LEFT); // check LEFT by default }; extern Mouse_ Mouse; @@ -67,14 +73,42 @@ extern Mouse_ Mouse; //================================================================================ // Keyboard -#define KEY_MODIFIER_LEFT_CTRL 0x01 -#define KEY_MODIFIER_LEFT_SHIFT 0x02 -#define KEY_MODIFIER_LEFT_ALT 0x04 -#define KEY_MODIFIER_LEFT_GUI 0x08 -#define KEY_MODIFIER_RIGHT_CTRL 0x010 -#define KEY_MODIFIER_RIGHT_SHIFT 0x020 -#define KEY_MODIFIER_RIGHT_ALT 0x040 -#define KEY_MODIFIER_RIGHT_GUI 0x080 +#define KEY_LEFT_CTRL 0x80 +#define KEY_LEFT_SHIFT 0x81 +#define KEY_LEFT_ALT 0x82 +#define KEY_LEFT_GUI 0x83 +#define KEY_RIGHT_CTRL 0x84 +#define KEY_RIGHT_SHIFT 0x85 +#define KEY_RIGHT_ALT 0x86 +#define KEY_RIGHT_GUI 0x87 + +#define KEY_UP_ARROW 0xDA +#define KEY_DOWN_ARROW 0xD9 +#define KEY_LEFT_ARROW 0xD8 +#define KEY_RIGHT_ARROW 0xD7 +#define KEY_BACKSPACE 0xB2 +#define KEY_TAB 0xB3 +#define KEY_RETURN 0xB0 +#define KEY_ESC 0xB1 +#define KEY_INSERT 0xD1 +#define KEY_DELETE 0xD4 +#define KEY_PAGE_UP 0xD3 +#define KEY_PAGE_DOWN 0xD6 +#define KEY_HOME 0xD2 +#define KEY_END 0xD5 +#define KEY_CAPS_LOCK 0xC1 +#define KEY_F1 0xC2 +#define KEY_F2 0xC3 +#define KEY_F3 0xC4 +#define KEY_F4 0xC5 +#define KEY_F5 0xC6 +#define KEY_F6 0xC7 +#define KEY_F7 0xC8 +#define KEY_F8 0xC9 +#define KEY_F9 0xCA +#define KEY_F10 0xCB +#define KEY_F11 0xCC +#define KEY_F12 0xCD // Low level key report: up to 6 keys and shift, ctrl etc at once typedef struct @@ -84,24 +118,19 @@ typedef struct uint8_t keys[6]; } KeyReport; -// Map a character into a key report -// Called from Print to map text to keycodes -class KeyMap -{ -public: - virtual void charToKey(int c, KeyReport* keyReport) = 0; -}; - -// class Keyboard_ : public Print { private: - KeyMap* _keyMap; + KeyReport _keyReport; void sendReport(KeyReport* keys); - void setKeyMap(KeyMap* keyMap); public: - Keyboard_(); - virtual size_t write(uint8_t); + Keyboard_(void); + void begin(void); + void end(void); + virtual size_t write(uint8_t k); + virtual size_t press(uint8_t k); + virtual size_t release(uint8_t k); + virtual void releaseAll(void); }; extern Keyboard_ Keyboard; diff --git a/cores/arduino/USBCore.cpp b/cores/arduino/USBCore.cpp index 4c71b34..6766be6 100644 --- a/cores/arduino/USBCore.cpp +++ b/cores/arduino/USBCore.cpp @@ -51,16 +51,20 @@ const u16 STRING_LANGUAGE[2] = { const u16 STRING_IPRODUCT[17] = { (3<<8) | (2+2*16), -#if USB_PID == USB_PID_LEONARDO +#if USB_PID == 0x8036 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o' -#elif USB_PID == USB_PID_MICRO - 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ',' ',' ' +#else + 'U','S','B',' ','I','O',' ','B','o','a','r','d',' ',' ',' ',' ' #endif }; const u16 STRING_IMANUFACTURER[12] = { (3<<8) | (2+2*11), +#if USB_VID == 0x2341 'A','r','d','u','i','n','o',' ','L','L','C' +#else + 'U','n','k','n','o','w','n',' ',' ',' ',' ' +#endif }; #ifdef CDC_ENABLED @@ -230,7 +234,7 @@ int USB_Recv(u8 ep, void* d, int len) n = len; u8* dst = (u8*)d; while (n--) - *dst++ = USBD_Recv8(); + *dst++ = Recv8(); if (len && !FifoByteCount()) // release empty buffer ReleaseRX(); @@ -599,6 +603,8 @@ ISR(USB_GEN_vect) { #ifdef CDC_ENABLED USB_Flush(CDC_TX); // Send a tx frame if found + while (USB_Available(CDC_RX)) // Handle received bytes (if any) + Serial.accept(); #endif // check whether the one-shot period has elapsed. if so, turn off the LED @@ -621,13 +627,13 @@ u8 USBConnected() //======================================================================= //======================================================================= -USB_ USB; +USBDevice_ USBDevice; -USB_::USB_() +USBDevice_::USBDevice_() { } -void USB_::attach() +void USBDevice_::attach() { _usbConfiguration = 0; UHWCON = 0x01; // power internal reg @@ -635,6 +641,12 @@ void USB_::attach() PLLCSR = 0x12; // Need 16 MHz xtal while (!(PLLCSR & (1<<PLOCK))) // wait for lock pll ; + + // Some tests on specific versions of macosx (10.7.3), reported some + // strange behaviuors when the board is reset using the serial + // port touch at 1200 bps. This delay fixes this behaviour. + delay(1); + USBCON = ((1<<USBE)|(1<<OTGPADE)); // start USB clock UDIEN = (1<<EORSTE)|(1<<SOFE); // Enable interrupts for EOR (End of Reset) and SOF (start of frame) UDCON = 0; // enable attach resistor @@ -642,19 +654,19 @@ void USB_::attach() TX_RX_LED_INIT; } -void USB_::detach() +void USBDevice_::detach() { } // Check for interrupts // TODO: VBUS detection -bool USB_::configured() +bool USBDevice_::configured() { return _usbConfiguration; } -void USB_::poll() +void USBDevice_::poll() { } -#endif /* if defined(USBCON) */
\ No newline at end of file +#endif /* if defined(USBCON) */ diff --git a/cores/arduino/USBDesc.h b/cores/arduino/USBDesc.h index 549ed9e..900713e 100644 --- a/cores/arduino/USBDesc.h +++ b/cores/arduino/USBDesc.h @@ -60,8 +60,4 @@ #define IMANUFACTURER 1 #define IPRODUCT 2 -#define USB_PID_LEONARDO 0x0034 -#define USB_PID_MICRO 0x0035 -#define USB_VID 0x2341 // arduino LLC vid -#define USB_PID ARDUINO_MODEL_USB_PID diff --git a/cores/arduino/WInterrupts.c b/cores/arduino/WInterrupts.c index 3b9fe08..8f3ec84 100755..100644 --- a/cores/arduino/WInterrupts.c +++ b/cores/arduino/WInterrupts.c @@ -47,7 +47,19 @@ void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { // Enable the interrupt. switch (interruptNum) { -#if defined(EICRA) && defined(EICRB) && defined(EIMSK) +#if defined(__AVR_ATmega32U4__) + // I hate doing this, but the register assignment differs between the 1280/2560 + // and the 32U4. Since avrlib defines registers PCMSK1 and PCMSK2 that aren't + // even present on the 32U4 this is the only way to distinguish between them. + case 0: + EICRA = (EICRA & ~((1<<ISC00) | (1<<ISC01))) | (mode << ISC00); + EIMSK |= (1<<INT0); + break; + case 1: + EICRA = (EICRA & ~((1<<ISC10) | (1<<ISC11))) | (mode << ISC10); + EIMSK |= (1<<INT1); + break; +#elif defined(EICRA) && defined(EICRB) && defined(EIMSK) case 2: EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); EIMSK |= (1 << INT0); @@ -80,7 +92,7 @@ void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70); EIMSK |= (1 << INT7); break; -#else +#else case 0: #if defined(EICRA) && defined(ISC00) && defined(EIMSK) EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); @@ -134,7 +146,14 @@ void detachInterrupt(uint8_t interruptNum) { // to the number of the EIMSK bit to clear, as this isn't true on the // ATmega8. There, INT0 is 6 and INT1 is 7.) switch (interruptNum) { -#if defined(EICRA) && defined(EICRB) && defined(EIMSK) +#if defined(__AVR_ATmega32U4__) + case 0: + EIMSK &= ~(1<<INT0); + break; + case 1: + EIMSK &= ~(1<<INT1); + break; +#elif defined(EICRA) && defined(EICRB) && defined(EIMSK) case 2: EIMSK &= ~(1 << INT0); break; @@ -196,7 +215,18 @@ void attachInterruptTwi(void (*userFunc)(void) ) { } */ -#if defined(EICRA) && defined(EICRB) +#if defined(__AVR_ATmega32U4__) +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +#elif defined(EICRA) && defined(EICRB) SIGNAL(INT0_vect) { if(intFunc[EXTERNAL_INT_2]) diff --git a/cores/arduino/main.cpp b/cores/arduino/main.cpp index 34450f4..3d4e079 100755..100644 --- a/cores/arduino/main.cpp +++ b/cores/arduino/main.cpp @@ -5,7 +5,7 @@ int main(void) init(); #if defined(USBCON) - USB.attach(); + USBDevice.attach(); #endif setup(); diff --git a/cores/arduino/wiring.c b/cores/arduino/wiring.c index e7f7cde..ac8bb6f 100755..100644 --- a/cores/arduino/wiring.c +++ b/cores/arduino/wiring.c @@ -278,12 +278,21 @@ void init() sbi(TCCR3B, CS30); sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode #endif - + +#if defined(TCCR4A) && defined(TCCR4B) && defined(TCCR4D) /* beginning of timer4 block for 32U4 and similar */ + sbi(TCCR4B, CS42); // set timer4 prescale factor to 64 + sbi(TCCR4B, CS41); + sbi(TCCR4B, CS40); + sbi(TCCR4D, WGM40); // put timer 4 in phase- and frequency-correct PWM mode + sbi(TCCR4A, PWM4A); // enable PWM mode for comparator OCR4A + sbi(TCCR4C, PWM4D); // enable PWM mode for comparator OCR4D +#else /* beginning of timer4 block for ATMEGA1280 and ATMEGA2560 */ #if defined(TCCR4B) && defined(CS41) && defined(WGM40) sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64 sbi(TCCR4B, CS40); sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode #endif +#endif /* end timer4 block for ATMEGA1280/2560 and similar */ #if defined(TCCR5B) && defined(CS51) && defined(WGM50) sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64 diff --git a/cores/arduino/wiring_analog.c b/cores/arduino/wiring_analog.c index a8bc817..0e9881f 100644 --- a/cores/arduino/wiring_analog.c +++ b/cores/arduino/wiring_analog.c @@ -206,14 +206,17 @@ void analogWrite(uint8_t pin, int val) break; #endif - #if defined(TCCR4A) && defined(COM4A1) + #if defined(TCCR4A) case TIMER4A: - // connect pwm to pin on timer 4, channel A + //connect pwm to pin on timer 4, channel A sbi(TCCR4A, COM4A1); - OCR4A = val; // set pwm duty + #if defined(COM4A0) // only used on 32U4 + cbi(TCCR4A, COM4A0); + #endif + OCR4A = val; // set pwm duty break; #endif - + #if defined(TCCR4A) && defined(COM4B1) case TIMER4B: // connect pwm to pin on timer 4, channel B @@ -230,14 +233,18 @@ void analogWrite(uint8_t pin, int val) break; #endif - #if defined(TCCR4A) && defined(COM4D1) - case TIMER4D: + #if defined(TCCR4C) && defined(COM4D1) + case TIMER4D: // connect pwm to pin on timer 4, channel D - sbi(TCCR4A, COM4D1); - OCR4D = val; // set pwm duty + sbi(TCCR4C, COM4D1); + #if defined(COM4D0) // only used on 32U4 + cbi(TCCR4C, COM4D0); + #endif + OCR4D = val; // set pwm duty break; #endif + #if defined(TCCR5A) && defined(COM5A1) case TIMER5A: // connect pwm to pin on timer 5, channel A @@ -272,3 +279,4 @@ void analogWrite(uint8_t pin, int val) } } } + diff --git a/cores/arduino/wiring_digital.c b/cores/arduino/wiring_digital.c index 584a28a..be323b1 100755..100644 --- a/cores/arduino/wiring_digital.c +++ b/cores/arduino/wiring_digital.c @@ -115,13 +115,17 @@ static void turnOffPWM(uint8_t timer) #if defined(TCCR4A) && defined(COM4A1) case TIMER4A: cbi(TCCR4A, COM4A1); break; - #endif + #endif #if defined(TCCR4A) && defined(COM4B1) case TIMER4B: cbi(TCCR4A, COM4B1); break; #endif #if defined(TCCR4A) && defined(COM4C1) case TIMER4C: cbi(TCCR4A, COM4C1); break; - #endif + #endif + #if defined(TCCR4C) && defined(COM4D1) + case TIMER4D: cbi(TCCR4C, COM4D1); break; + #endif + #if defined(TCCR5A) case TIMER5A: cbi(TCCR5A, COM5A1); break; case TIMER5B: cbi(TCCR5A, COM5B1); break; diff --git a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino index 88e3488..0709b2d 100644 --- a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino +++ b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino @@ -14,7 +14,11 @@ byte value; void setup() { + // initialize serial and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } } void loop() diff --git a/libraries/Ethernet/examples/ChatServer/ChatServer.ino b/libraries/Ethernet/examples/ChatServer/ChatServer.ino index de75257..d50e5a6 100644 --- a/libraries/Ethernet/examples/ChatServer/ChatServer.ino +++ b/libraries/Ethernet/examples/ChatServer/ChatServer.ino @@ -12,7 +12,7 @@ created 18 Dec 2009 by David A. Mellis - modified 12 March 2012 + modified 9 Apr 2012 by Tom Igoe */ @@ -39,8 +39,13 @@ void setup() { Ethernet.begin(mac, ip, gateway, subnet); // start listening for clients server.begin(); - // open the serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Chat server address:"); Serial.println(Ethernet.localIP()); } diff --git a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino index 630dd17..5eaaf24 100644 --- a/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino +++ b/libraries/Ethernet/examples/DhcpAddressPrinter/DhcpAddressPrinter.ino @@ -9,6 +9,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 12 April 2011 + modified 9 Apr 2012 by Tom Igoe */ @@ -27,8 +28,13 @@ byte mac[] = { EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino index 5082054..09cbd43 100644 --- a/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino +++ b/libraries/Ethernet/examples/DhcpChatServer/DhcpChatServer.ino @@ -12,6 +12,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 21 May 2011 + modified 9 Apr 2012 by Tom Igoe Based on ChatServer example by David A. Mellis @@ -34,8 +35,14 @@ EthernetServer server(23); boolean gotAMessage = false; // whether or not you got a message from the client yet void setup() { - // open the serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + // this check is only needed on the Leonardo: + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: Serial.println("Trying to get an IP address using DHCP"); if (Ethernet.begin(mac) == 0) { diff --git a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino index 5c7a53a..c14abf4 100644 --- a/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino +++ b/libraries/Ethernet/examples/DnsWebClient/DnsWebClient.ino @@ -9,7 +9,7 @@ created 18 Dec 2009 by David A. Mellis - modified 12 April 2011 + modified 9 Apr 2012 by Tom Igoe, based on work by Adrian McEwen */ @@ -28,8 +28,13 @@ char serverName[] = "www.google.com"; EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino index 4d4290d..dfd2d40 100644 --- a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino +++ b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino @@ -16,7 +16,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 15 March 2010 - updated 16 Mar 2012 + modified 9 Apr 2012 by Tom Igoe with input from Usman Haque and Joe Saavedra http://arduino.cc/en/Tutorial/PachubeClient @@ -53,8 +53,13 @@ boolean lastConnected = false; // state of the connection last t const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com void setup() { - // start serial port: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino index 3535287..2a96e9f 100644 --- a/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino +++ b/libraries/Ethernet/examples/PachubeClientString/PachubeClientString.ino @@ -1,12 +1,12 @@ /* - Pachube sensor client with Strings + Cosm sensor client with Strings - This sketch connects an analog sensor to Pachube (http://www.pachube.com) + This sketch connects an analog sensor to Cosm (http://www.cosm.com) using a Wiznet Ethernet shield. You can use the Arduino Ethernet shield, or the Adafruit Ethernet shield, either one will work, as long as it's got a Wiznet Ethernet module on board. - This example has been updated to use version 2.0 of the Pachube.com API. + This example has been updated to use version 2.0 of the Cosm.com API. To make it work, create a feed with two datastreams, and give them the IDs sensor1 and sensor2. Or change the code below to match your feed. @@ -18,10 +18,10 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 15 March 2010 - updated 16 Mar 2012 + modified 9 Apr 2012 by Tom Igoe with input from Usman Haque and Joe Saavedra - http://arduino.cc/en/Tutorial/PachubeClientString + http://arduino.cc/en/Tutorial/CosmClientString This code is in the public domain. */ @@ -30,14 +30,16 @@ #include <Ethernet.h> -#define APIKEY "YOUR API KEY GOES HERE" // replace your pachube api key here +/#define APIKEY "YOUR API KEY GOES HERE" // replace your Cosm api key here #define FEEDID 00000 // replace your feed ID #define USERAGENT "My Project" // user agent is the project name + // assign a MAC address for the ethernet controller. // fill in your address here: byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED}; + // fill in an available IP address on your network here, // for manual configuration: IPAddress ip(10,0,1,20); @@ -47,16 +49,21 @@ EthernetClient client; // if you don't want to use DNS (and reduce your sketch size) // use the numeric IP instead of the name for the server: -//IPAddress server(216,52,233,122); // numeric IP for api.pachube.com -char server[] = "api.pachube.com"; // name address for pachube API +IPAddress server(216,52,233,121); // numeric IP for api.cosm.com +//char server[] = "api.cosm.com"; // name address for Cosm API unsigned long lastConnectionTime = 0; // last time you connected to the server, in milliseconds boolean lastConnected = false; // state of the connection last time through the main loop -const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com +const unsigned long postingInterval = 10*1000; //delay between updates to Cosm.com void setup() { - // start serial port: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // give the ethernet module time to boot up: delay(1000); // start the Ethernet connection: @@ -76,7 +83,7 @@ void loop() { dataString += sensorReading; // you can append multiple readings to this String if your - // pachube feed is set up to handle multiple values: + // Cosm feed is set up to handle multiple values: int otherSensorReading = analogRead(A1); dataString += "\nsensor2,"; dataString += otherSensorReading; @@ -116,8 +123,8 @@ void sendData(String thisData) { client.print("PUT /v2/feeds/"); client.print(FEEDID); client.println(".csv HTTP/1.1"); - client.println("Host: api.pachube.com"); - client.print("X-PachubeApiKey: "); + client.println("Host: api.cosm.com"); + client.print("X-CosmApiKey: "); client.println(APIKEY); client.print("User-Agent: "); client.println(USERAGENT); diff --git a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino index 5cf1ad8..3457125 100644 --- a/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino +++ b/libraries/Ethernet/examples/TelnetClient/TelnetClient.ino @@ -13,6 +13,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 14 Sep 2010 + modified 9 Apr 2012 by Tom Igoe */ @@ -38,8 +39,13 @@ EthernetClient client; void setup() { // start the Ethernet connection: Ethernet.begin(mac, ip); - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // give the Ethernet shield a second to initialize: delay(1000); Serial.println("connecting..."); diff --git a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino index a3b397d..3587d72 100644 --- a/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino +++ b/libraries/Ethernet/examples/TwitterClient/TwitterClient.ino @@ -17,6 +17,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 21 May 2011 + modified 9 Apr 2012 by Tom Igoe This code is in the public domain. @@ -51,8 +52,13 @@ void setup() { currentLine.reserve(256); tweet.reserve(150); - // initialize serial: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // attempt a DHCP connection: Serial.println("Attempting to get an IP address using DHCP:"); if (!Ethernet.begin(mac)) { diff --git a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino index b4e24b8..93ffe39 100644 --- a/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino +++ b/libraries/Ethernet/examples/UdpNtpClient/UdpNtpClient.ino @@ -9,7 +9,7 @@ created 4 Sep 2010 by Michael Margolis - modified 17 Sep 2010 + modified 9 Apr 2012 by Tom Igoe This code is in the public domain. @@ -38,7 +38,12 @@ EthernetUDP Udp; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start Ethernet and UDP if (Ethernet.begin(mac) == 0) { diff --git a/libraries/Ethernet/examples/WebClient/WebClient.ino b/libraries/Ethernet/examples/WebClient/WebClient.ino index 1806854..5d5d7f2 100644 --- a/libraries/Ethernet/examples/WebClient/WebClient.ino +++ b/libraries/Ethernet/examples/WebClient/WebClient.ino @@ -8,6 +8,7 @@ * Ethernet shield attached to pins 10, 11, 12, 13 created 18 Dec 2009 + modified 9 Apr 2012 by David A. Mellis */ @@ -26,8 +27,12 @@ IPAddress server(173,194,33,104); // Google EthernetClient client; void setup() { - // start the serial library: + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // start the Ethernet connection: if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); diff --git a/libraries/Ethernet/examples/WebServer/WebServer.ino b/libraries/Ethernet/examples/WebServer/WebServer.ino index 7cf2c53..ce8dbb1 100644 --- a/libraries/Ethernet/examples/WebServer/WebServer.ino +++ b/libraries/Ethernet/examples/WebServer/WebServer.ino @@ -10,7 +10,7 @@ created 18 Dec 2009 by David A. Mellis - modified 20 Mar 2012 + modified 9 Apr 2012 by Tom Igoe */ @@ -30,7 +30,13 @@ IPAddress ip(192,168,1, 177); EthernetServer server(80); void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + // start the Ethernet connection and the server: Ethernet.begin(mac, ip); server.begin(); diff --git a/libraries/Ethernet/utility/w5100.h b/libraries/Ethernet/utility/w5100.h index 153aedb..8dccd9f 100755 --- a/libraries/Ethernet/utility/w5100.h +++ b/libraries/Ethernet/utility/w5100.h @@ -327,7 +327,11 @@ private: inline static void initSS() { DDRB |= _BV(4); }; inline static void setSS() { PORTB &= ~_BV(4); }; inline static void resetSS() { PORTB |= _BV(4); }; -#elif defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB162__) +#elif defined(__AVR_ATmega32U4__) + inline static void initSS() { DDRB |= _BV(6); }; + inline static void setSS() { PORTB &= ~_BV(6); }; + inline static void resetSS() { PORTB |= _BV(6); }; +#elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB162__) inline static void initSS() { DDRB |= _BV(0); }; inline static void setSS() { PORTB &= ~_BV(0); }; inline static void resetSS() { PORTB |= _BV(0); }; diff --git a/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino b/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino index 27123ad..1127d8f 100644 --- a/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino +++ b/libraries/LiquidCrystal/examples/Autoscroll/Autoscroll.ino @@ -32,7 +32,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalAutoscroll + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/Blink/Blink.ino b/libraries/LiquidCrystal/examples/Blink/Blink.ino index e410424..9667b5d 100644 --- a/libraries/LiquidCrystal/examples/Blink/Blink.ino +++ b/libraries/LiquidCrystal/examples/Blink/Blink.ino @@ -32,7 +32,7 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalBlink */ diff --git a/libraries/LiquidCrystal/examples/Cursor/Cursor.ino b/libraries/LiquidCrystal/examples/Cursor/Cursor.ino index 28e2a6a..05862a4 100644 --- a/libraries/LiquidCrystal/examples/Cursor/Cursor.ino +++ b/libraries/LiquidCrystal/examples/Cursor/Cursor.ino @@ -33,7 +33,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalCursor + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/Display/Display.ino b/libraries/LiquidCrystal/examples/Display/Display.ino index b000731..a85effb 100644 --- a/libraries/LiquidCrystal/examples/Display/Display.ino +++ b/libraries/LiquidCrystal/examples/Display/Display.ino @@ -33,7 +33,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalDisplay + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/Scroll/Scroll.ino b/libraries/LiquidCrystal/examples/Scroll/Scroll.ino index 71e5e8c..0d6d8dc 100644 --- a/libraries/LiquidCrystal/examples/Scroll/Scroll.ino +++ b/libraries/LiquidCrystal/examples/Scroll/Scroll.ino @@ -33,7 +33,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalScroll + */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino index 9727cee..a6f8f40 100644 --- a/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino +++ b/libraries/LiquidCrystal/examples/SerialDisplay/SerialDisplay.ino @@ -32,7 +32,7 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalSerial */ // include the library code: diff --git a/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino b/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino index 51bab1f..cabd8ea 100644 --- a/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino +++ b/libraries/LiquidCrystal/examples/TextDirection/TextDirection.ino @@ -32,7 +32,7 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalTextDirection */ @@ -49,7 +49,6 @@ void setup() { lcd.begin(16, 2); // turn on the cursor: lcd.cursor(); - Serial.begin(9600); } void loop() { diff --git a/libraries/LiquidCrystal/examples/setCursor/setCursor.ino b/libraries/LiquidCrystal/examples/setCursor/setCursor.ino index 3c4edf3..e45c491 100644 --- a/libraries/LiquidCrystal/examples/setCursor/setCursor.ino +++ b/libraries/LiquidCrystal/examples/setCursor/setCursor.ino @@ -32,7 +32,8 @@ This example code is in the public domain. - http://www.arduino.cc/en/Tutorial/LiquidCrystal + http://arduino.cc/en/Tutorial/LiquidCrystalSetCursor + */ // include the library code: diff --git a/libraries/SD/examples/CardInfo/CardInfo.ino b/libraries/SD/examples/CardInfo/CardInfo.ino index fb2f6c3..0c2dfc5 100644 --- a/libraries/SD/examples/CardInfo/CardInfo.ino +++ b/libraries/SD/examples/CardInfo/CardInfo.ino @@ -16,7 +16,7 @@ created 28 Mar 2011 by Limor Fried - modified 16 Mar 2011 + modified 9 Apr 2012 by Tom Igoe */ // include the SD library: @@ -35,7 +35,13 @@ const int chipSelect = 4; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("\nInitializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SD/examples/Datalogger/Datalogger.ino b/libraries/SD/examples/Datalogger/Datalogger.ino index 73d81af..a7f85ee 100644 --- a/libraries/SD/examples/Datalogger/Datalogger.ino +++ b/libraries/SD/examples/Datalogger/Datalogger.ino @@ -13,7 +13,7 @@ ** CS - pin 4 created 24 Nov 2010 - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -30,7 +30,13 @@ const int chipSelect = 4; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // make sure that the default chip select pin is set to // output, even if you don't use it: diff --git a/libraries/SD/examples/DumpFile/DumpFile.ino b/libraries/SD/examples/DumpFile/DumpFile.ino index 961717f..d83089a 100644 --- a/libraries/SD/examples/DumpFile/DumpFile.ino +++ b/libraries/SD/examples/DumpFile/DumpFile.ino @@ -12,6 +12,9 @@ ** CS - pin 4 created 22 December 2010 + by Limor Fried + modified 9 Apr 2012 + by Tom Igoe This example code is in the public domain. @@ -27,7 +30,13 @@ const int chipSelect = 4; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // make sure that the default chip select pin is set to // output, even if you don't use it: diff --git a/libraries/SD/examples/Files/Files.ino b/libraries/SD/examples/Files/Files.ino index 5ed9fea..a15b862 100644 --- a/libraries/SD/examples/Files/Files.ino +++ b/libraries/SD/examples/Files/Files.ino @@ -11,7 +11,7 @@ created Nov 2010 by David A. Mellis - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -23,7 +23,13 @@ File myFile; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SD/examples/ReadWrite/ReadWrite.ino b/libraries/SD/examples/ReadWrite/ReadWrite.ino index 9957218..5805fc8 100644 --- a/libraries/SD/examples/ReadWrite/ReadWrite.ino +++ b/libraries/SD/examples/ReadWrite/ReadWrite.ino @@ -11,7 +11,7 @@ created Nov 2010 by David A. Mellis - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -24,7 +24,13 @@ File myFile; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SD/examples/listfiles/listfiles.ino b/libraries/SD/examples/listfiles/listfiles.ino index b2435a2..876c3f8 100644 --- a/libraries/SD/examples/listfiles/listfiles.ino +++ b/libraries/SD/examples/listfiles/listfiles.ino @@ -11,7 +11,7 @@ created Nov 2010 by David A. Mellis - updated 2 Dec 2010 + modified 9 Apr 2012 by Tom Igoe This example code is in the public domain. @@ -23,7 +23,13 @@ File root; void setup() { + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.print("Initializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino index 615d2b3..69bcc01 100644 --- a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino +++ b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino @@ -9,6 +9,7 @@ * TX is digital pin 3 (connect to RX of other device) created back in the mists of time + modified 9 Apr 2012 by Tom Igoe based on Mikal Hart's example @@ -21,7 +22,13 @@ SoftwareSerial mySerial(2, 3); // RX, TX void setup() { + // Open serial communications and wait for port to open: Serial.begin(57600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + + Serial.println("Goodnight moon!"); // set the data rate for the SoftwareSerial port diff --git a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino index e870c6f..d9f8f45 100644 --- a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino +++ b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino @@ -17,6 +17,7 @@ * Second serial device's TX attached to digital pin 4, RX to pin 5 created 18 Apr. 2011 + modified 9 Apr 2012 by Tom Igoe based on Mikal Hart's twoPortRXExample @@ -33,8 +34,12 @@ SoftwareSerial portTwo(4, 5); void setup() { - // Start the hardware serial port + // Open serial communications and wait for port to open: Serial.begin(9600); + while (!Serial) { + ; // wait for serial port to connect. Needed for Leonardo only + } + // Start each software serial port portOne.begin(9600); diff --git a/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino b/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino index dbd0f7f..1a67a55 100644 --- a/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino +++ b/libraries/Stepper/examples/stepper_speedControl/stepper_speedControl.ino @@ -26,11 +26,10 @@ const int stepsPerRevolution = 200; // change this to fit the number of steps p // initialize the stepper library on pins 8 through 11: Stepper myStepper(stepsPerRevolution, 8,9,10,11); -int stepCount = 0; // number of steps the motor has taken +int stepCount = 0; // number of steps the motor has taken void setup() { - // initialize the serial port: - Serial.begin(9600); + // nothing to do inside the setup } void loop() { diff --git a/platform.txt b/platform.txt index c47cd8b..c665c20 100644 --- a/platform.txt +++ b/platform.txt @@ -6,12 +6,12 @@ name=Arduino # Default "compiler.path" is correct, change only if you want to overidde the initial value #compiler.path={ide.path}/tools/avr/bin/.. compiler.c.cmd=avr-gcc -compiler.c.flags=-c -g -Os -w -ffunction-sections -fdata-sections +compiler.c.flags=-c -g -Os -w -ffunction-sections -fdata-sections -MMD compiler.c.elf.flags=-Os -Wl,--gc-sections compiler.c.elf.cmd=avr-gcc compiler.S.flags=-c -g -assembler-with-cpp compiler.cpp.cmd=avr-g++ -compiler.cpp.flags=-c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections +compiler.cpp.flags=-c -g -Os -w -fno-exceptions -ffunction-sections -fdata-sections -MMD compiler.ar.cmd=avr-ar compiler.ar.flags=rcs compiler.objcopy.cmd=avr-objcopy @@ -25,10 +25,10 @@ compiler.size.cmd=avr-size # -------------------- ## Compile c files -recipe.c.o.pattern={compiler.path}{compiler.c.cmd} {compiler.c.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -D{software}={runtime.ide.version} {includes} {source_file} -o {object_file} +recipe.c.o.pattern={compiler.path}{compiler.c.cmd} {compiler.c.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -D{software}={runtime.ide.version} {build.extra_flags} {includes} {source_file} -o {object_file} ## Compile c++ files -recipe.cpp.o.pattern={compiler.path}{compiler.cpp.cmd} {compiler.cpp.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -D{software}={runtime.ide.version} {includes} {source_file} -o {object_file} +recipe.cpp.o.pattern={compiler.path}{compiler.cpp.cmd} {compiler.cpp.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -D{software}={runtime.ide.version} {build.extra_flags} {includes} {source_file} -o {object_file} ## Create archives recipe.ar.pattern={compiler.path}{compiler.ar.cmd} {compiler.ar.flags} {build.path}/{archive_file} {object_file} diff --git a/variants/leonardo/pins_arduino.h b/variants/leonardo/pins_arduino.h index 5a15146..9f770d6 100644 --- a/variants/leonardo/pins_arduino.h +++ b/variants/leonardo/pins_arduino.h @@ -27,8 +27,6 @@ #include <avr/pgmspace.h> -#define ARDUINO_MODEL_USB_PID 0x0034 - #define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) #define TXLED0 PORTD |= (1<<5) #define TXLED1 PORTD &= ~(1<<5) @@ -59,6 +57,11 @@ static const uint8_t A9 = 27; // D9 static const uint8_t A10 = 28; // D10 static const uint8_t A11 = 29; // D12 +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + // __AVR_ATmega32U4__ has an unusual mapping of pins to channels extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; #define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) @@ -212,7 +215,7 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { _BV(6), // D29 / D12 - A11 - PD6 }; -const uint8_t PROGMEM digital_pin_to_timer_PGM[18] = { +const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, diff --git a/variants/micro/pins_arduino.h b/variants/micro/pins_arduino.h deleted file mode 100644 index c9f25eb..0000000 --- a/variants/micro/pins_arduino.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#include "../leonardo/pins_arduino.h" -#undef ARDUINO_MODEL_USB_PID -#define ARDUINO_MODEL_USB_PID 0x0035
\ No newline at end of file |