Remove non-USB boards

Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around.

1 files changed, 0 insertions, 140 deletions

diff --git a/variants/gemma/pins_arduino.h b/variants/gemma/pins_arduino.h
deleted file mode 100644
index e0ec217..0000000
--- a/variants/gemma/pins_arduino.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
-  pins_arduino.c - pin definitions for the Arduino board
-  Part of Arduino / Wiring Lite
-
-  Copyright (c) 2005 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-  Modified 09-10-2009 for attiny45 A.Saporetti
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Defines to make D4 support PWM
-// See for more info: http://forums.adafruit.com/viewtopic.php?f=52&t=43951
-//#define TCCR1A GTCCR
-//#define WGM10  PWM1B
-
-// ATMEL ATTINY45 / ARDUINO
-//
-//                  +-\/-+
-// Ain0 (D 5) PB5  1|    |8  Vcc
-// Ain3 (D 3) PB3  2|    |7  PB2 (D 2)  Ain1
-// Ain2 (D 4) PB4  3|    |6  PB1 (D 1) pwm1
-//            GND  4|    |5  PB0 (D 0) pwm0
-//                  +----+
-
-#define NUM_DIGITAL_PINS            3
-#define NUM_ANALOG_INPUTS           1
-#define LED_BUILTIN 								1
-
-#define PIN_A0               (6)
-#define PIN_A1               (7)
-#define PIN_A2               (8)
-#define PIN_A3               (9)
-
-static const uint8_t A0 = PIN_A0;
-static const uint8_t A1 = PIN_A1;
-static const uint8_t A2 = PIN_A2;
-static const uint8_t A3 = PIN_A3;
-
-#define digitalPinToPCICR(p)    ( ((p) >= 0 && (p) <= 4) ? (&GIMSK) : ((uint8_t *)0) )
-#define digitalPinToPCICRbit(p) ( PCIE )
-#define digitalPinToPCMSK(p)    ( ((p) <= 4) ? (&PCMSK) : ((uint8_t *)0) )
-#define digitalPinToPCMSKbit(p) ( (p) )
-
-#define digitalPinToInterrupt(p)  ((p) == 2 ? 0 : NOT_AN_INTERRUPT)
-
-#define analogPinToChannel(p)   ( (p) < 6 ? (p) : (p) - 6 )
-
-#define TCCR1A GTCCR
-
-#ifdef ARDUINO_MAIN
-
-void initVariant()
-{
-	GTCCR |= (1 << PWM1B);
-}
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing) tiny45 only port B 
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	(uint16_t) &DDRB,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-	NOT_A_PORT,
-	NOT_A_PORT,
-	(uint16_t) &PORTB,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-	NOT_A_PIN,
-	NOT_A_PIN,
-	(uint16_t) &PINB,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-	PB, /* 0 */
-	PB,
-	PB,
-	PB,
-	PB, 
-	PB, // 5
-	PB, // A0
-	PB,
-	PB,
-	PB, // A4
-
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-	_BV(0), /* 0, port B */
-	_BV(1),
-	_BV(2),
-	_BV(3), /* 3 port B */
-	_BV(4),
-	_BV(5),
-	_BV(5),
-	_BV(2),
-	_BV(4),
-	_BV(3),
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-	TIMER0A, /* OC0A */
-	TIMER0B,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	TIMER1B,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-	NOT_ON_TIMER,
-};
-
-#endif
-
-#endif