Correct typos in comments and documentation

21 files changed, 45 insertions, 54 deletions

diff --git a/libraries/EEPROM/README.md b/libraries/EEPROM/README.md
index a624136..9ca761d 100644
--- a/libraries/EEPROM/README.md
+++ b/libraries/EEPROM/README.md
@@ -53,7 +53,7 @@ This function does not return any value.
 This function will retrieve any object from the EEPROM.
 Two parameters are needed to call this function. The first is an `int` containing the address that is to be written, and the second is the object you would like to read.
 
-This function returns a reference to the `object` passed in. It does not need to be used and is only returned for conveience.
+This function returns a reference to the `object` passed in. It does not need to be used and is only returned for convenience.
 
 #### **`EEPROM.put( address, object )`** [[_example_]](examples/eeprom_put/eeprom_put.ino)
 
@@ -62,7 +62,7 @@ Two parameters are needed to call this function. The first is an `int` containin
 
 This function uses the _update_ method to write its data, and therefore only rewrites changed cells.
 
-This function returns a reference to the `object` passed in. It does not need to be used and is only returned for conveience.
+This function returns a reference to the `object` passed in. It does not need to be used and is only returned for convenience.
 
 #### **Subscript operator: `EEPROM[address]`** [[_example_]](examples/eeprom_crc/eeprom_crc.ino)
 
@@ -136,4 +136,4 @@ This is useful for STL objects, custom iteration and C++11 style ranged for loop
 This function returns an `EEPtr` pointing at the location after the last EEPROM cell.  
 Used with `begin()` to provide custom iteration.
 
-**Note:** The `EEPtr` returned is invalid as it is out of range. Infact the hardware causes wrapping of the address (overflow) and `EEPROM.end()` actually references the first EEPROM cell.
+**Note:** The `EEPtr` returned is invalid as it is out of range. In fact the hardware causes wrapping of the address (overflow) and `EEPROM.end()` actually references the first EEPROM cell.
diff --git a/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino b/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino
index 8b5121c..3fed10f 100644
--- a/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino
+++ b/libraries/EEPROM/examples/eeprom_clear/eeprom_clear.ino
@@ -18,9 +18,9 @@ void setup() {
     Iterate through each byte of the EEPROM storage.
 
     Larger AVR processors have larger EEPROM sizes, E.g:
-    - Arduno Duemilanove: 512b EEPROM storage.
-    - Arduino Uno:        1kb EEPROM storage.
-    - Arduino Mega:       4kb EEPROM storage.
+    - Arduino Duemilanove: 512 B EEPROM storage.
+    - Arduino Uno:         1 kB EEPROM storage.
+    - Arduino Mega:        4 kB EEPROM storage.
 
     Rather than hard-coding the length, you should use the pre-provided length function.
     This will make your code portable to all AVR processors.
diff --git a/libraries/EEPROM/examples/eeprom_iteration/eeprom_iteration.ino b/libraries/EEPROM/examples/eeprom_iteration/eeprom_iteration.ino
index 3673b47..b5d68be 100644
--- a/libraries/EEPROM/examples/eeprom_iteration/eeprom_iteration.ino
+++ b/libraries/EEPROM/examples/eeprom_iteration/eeprom_iteration.ino
@@ -54,4 +54,4 @@ void setup() {
 
 } //End of setup function.
 
-void loop() {}
\ No newline at end of file
+void loop() {}
diff --git a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino
index a8a3510..d465035 100644
--- a/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino
+++ b/libraries/EEPROM/examples/eeprom_read/eeprom_read.ino
@@ -33,9 +33,9 @@ void loop() {
     Advance to the next address, when at the end restart at the beginning.
 
     Larger AVR processors have larger EEPROM sizes, E.g:
-    - Arduno Duemilanove: 512b EEPROM storage.
-    - Arduino Uno:        1kb EEPROM storage.
-    - Arduino Mega:       4kb EEPROM storage.
+    - Arduino Duemilanove: 512 B EEPROM storage.
+    - Arduino Uno:         1 kB EEPROM storage.
+    - Arduino Mega:        4 kB EEPROM storage.
 
     Rather than hard-coding the length, you should use the pre-provided length function.
     This will make your code portable to all AVR processors.
diff --git a/libraries/EEPROM/examples/eeprom_update/eeprom_update.ino b/libraries/EEPROM/examples/eeprom_update/eeprom_update.ino
index 5e3db5b..f5b0c0c 100644
--- a/libraries/EEPROM/examples/eeprom_update/eeprom_update.ino
+++ b/libraries/EEPROM/examples/eeprom_update/eeprom_update.ino
@@ -17,7 +17,7 @@
 int address = 0;
 
 void setup() {
-  /** EMpty setup **/
+  /** Empty setup **/
 }
 
 void loop() {
@@ -48,9 +48,9 @@ void loop() {
     Advance to the next address, when at the end restart at the beginning.
 
     Larger AVR processors have larger EEPROM sizes, E.g:
-    - Arduno Duemilanove: 512b EEPROM storage.
-    - Arduino Uno:        1kb EEPROM storage.
-    - Arduino Mega:       4kb EEPROM storage.
+    - Arduino Duemilanove: 512 B EEPROM storage.
+    - Arduino Uno:         1 kB EEPROM storage.
+    - Arduino Mega:        4 kB EEPROM storage.
 
     Rather than hard-coding the length, you should use the pre-provided length function.
     This will make your code portable to all AVR processors.
diff --git a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
index f9bea64..64e835c 100644
--- a/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
+++ b/libraries/EEPROM/examples/eeprom_write/eeprom_write.ino
@@ -36,9 +36,9 @@ void loop() {
     Advance to the next address, when at the end restart at the beginning.
 
     Larger AVR processors have larger EEPROM sizes, E.g:
-    - Arduno Duemilanove: 512b EEPROM storage.
-    - Arduino Uno:        1kb EEPROM storage.
-    - Arduino Mega:       4kb EEPROM storage.
+    - Arduino Duemilanove: 512 B EEPROM storage.
+    - Arduino Uno:         1 kB EEPROM storage.
+    - Arduino Mega:        4 kB EEPROM storage.
 
     Rather than hard-coding the length, you should use the pre-provided length function.
     This will make your code portable to all AVR processors.
diff --git a/libraries/HID/src/HID.cpp b/libraries/HID/src/HID.cpp
index 21ede26..3dd85fc 100644
--- a/libraries/HID/src/HID.cpp
+++ b/libraries/HID/src/HID.cpp
@@ -43,7 +43,7 @@ int HID_::getDescriptor(USBSetup& setup)
 	if (setup.bmRequestType != REQUEST_DEVICETOHOST_STANDARD_INTERFACE) { return 0; }
 	if (setup.wValueH != HID_REPORT_DESCRIPTOR_TYPE) { return 0; }
 
-	// In a HID Class Descriptor wIndex cointains the interface number
+	// In a HID Class Descriptor wIndex contains the interface number
 	if (setup.wIndex != pluggedInterface) { return 0; }
 
 	int total = 0;
diff --git a/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino
index df73ade..1b8ad70 100644
--- a/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino
+++ b/libraries/SPI/examples/BarometricPressureSensor/BarometricPressureSensor.ino
@@ -43,7 +43,7 @@ void setup() {
   // start the SPI library:
   SPI.begin();
 
-  // initalize the  data ready and chip select pins:
+  // initialize the  data ready and chip select pins:
   pinMode(dataReadyPin, INPUT);
   pinMode(chipSelectPin, OUTPUT);
 
@@ -140,4 +140,3 @@ void writeRegister(byte thisRegister, byte thisValue) {
   // take the chip select high to de-select:
   digitalWrite(chipSelectPin, HIGH);
 }
-
diff --git a/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino
index 8719058..39e5bf9 100644
--- a/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino
+++ b/libraries/SPI/examples/DigitalPotControl/DigitalPotControl.ino
@@ -14,7 +14,7 @@
  The circuit:
   * All A pins  of AD5206 connected to +5V
   * All B pins of AD5206 connected to ground
-  * An LED and a 220-ohm resisor in series connected from each W pin to ground
+  * An LED and a 220-ohm resistor in series connected from each W pin to ground
   * CS - to digital pin 10  (SS pin)
   * SDI - to digital pin 11 (MOSI pin)
   * CLK - to digital pin 13 (SCK pin)
@@ -27,7 +27,7 @@
 */
 
 
-// inslude the SPI library:
+// include the SPI library:
 #include <SPI.h>
 
 
@@ -64,7 +64,7 @@ void digitalPotWrite(int address, int value) {
   // take the SS pin low to select the chip:
   digitalWrite(slaveSelectPin, LOW);
   delay(100);
-  //  send in the address and value via SPI:
+  // send in the address and value via SPI:
   SPI.transfer(address);
   SPI.transfer(value);
   delay(100);
diff --git a/libraries/SPI/src/SPI.h b/libraries/SPI/src/SPI.h
index 5206a09..1e37079 100644
--- a/libraries/SPI/src/SPI.h
+++ b/libraries/SPI/src/SPI.h
@@ -106,7 +106,7 @@ private:
     // slowest (128 == 2 ^^ 7, so clock_div = 6).
     uint8_t clockDiv;
 
-    // When the clock is known at compiletime, use this if-then-else
+    // When the clock is known at compile time, use this if-then-else
     // cascade, which the compiler knows how to completely optimize
     // away. When clock is not known, use a loop instead, which generates
     // shorter code.
diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
index 61ce88c..061bb70 100644
--- a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
+++ b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
@@ -1,5 +1,5 @@
 /*
-  Software serial multple serial test
+  Software serial multiple serial test
 
  Receives from the hardware serial, sends to software serial.
  Receives from software serial, sends to hardware serial.
@@ -52,4 +52,3 @@ void loop() { // run over and over
     mySerial.write(Serial.read());
   }
 }
-
diff --git a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino
index 8d7f93e..d8c064b 100644
--- a/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino
+++ b/libraries/SoftwareSerial/examples/TwoPortReceive/TwoPortReceive.ino
@@ -1,5 +1,5 @@
 /*
-  Software serial multple serial test
+  Software serial multiple serial test
 
  Receives from the two software serial ports,
  sends to the hardware serial port.
@@ -56,7 +56,7 @@ void setup() {
 }
 
 void loop() {
-  // By default, the last intialized port is listening.
+  // By default, the last initialized port is listening.
   // when you want to listen on a port, explicitly select it:
   portOne.listen();
   Serial.println("Data from port one:");
@@ -83,9 +83,3 @@ void loop() {
   // blank line to separate data from the two ports:
   Serial.println();
 }
-
-
-
-
-
-
diff --git a/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
index 4d0a68f..aeb1a9c 100644
--- a/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
+++ b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino
@@ -3,7 +3,7 @@
 // and James Tichenor <http://www.jamestichenor.net>
 
 // Demonstrates use of the Wire library reading data from the
-// Devantech Utrasonic Rangers SFR08 and SFR10
+// Devantech Ultrasonic Rangers SFR08 and SFR10
 
 // Created 29 April 2006
 
@@ -13,8 +13,8 @@
 #include <Wire.h>
 
 void setup() {
-  Wire.begin();                // join i2c bus (address optional for master)
-  Serial.begin(9600);          // start serial communication at 9600bps
+  Wire.begin();                // join I2C bus (address optional for master)
+  Serial.begin(9600);          // start serial communication at 9600 bps
 }
 
 int reading = 0;
@@ -23,7 +23,7 @@ void loop() {
   // step 1: instruct sensor to read echoes
   Wire.beginTransmission(112); // transmit to device #112 (0x70)
   // the address specified in the datasheet is 224 (0xE0)
-  // but i2c adressing uses the high 7 bits so it's 112
+  // but I2C addressing uses the high 7 bits so it's 112
   Wire.write(byte(0x00));      // sets register pointer to the command register (0x00)
   Wire.write(byte(0x50));      // command sensor to measure in "inches" (0x50)
   // use 0x51 for centimeters
diff --git a/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino b/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
index dd40a25..b5da366 100644
--- a/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
+++ b/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino
@@ -13,7 +13,7 @@
 #include <Wire.h>
 
 void setup() {
-  Wire.begin(); // join i2c bus (address optional for master)
+  Wire.begin(); // join I2C bus (address optional for master)
 }
 
 byte val = 0;
@@ -31,4 +31,3 @@ void loop() {
   }
   delay(500);
 }
-
diff --git a/libraries/Wire/examples/i2c_scanner/i2c_scanner.ino b/libraries/Wire/examples/i2c_scanner/i2c_scanner.ino
index 3febbf4..295edf7 100644
--- a/libraries/Wire/examples/i2c_scanner/i2c_scanner.ino
+++ b/libraries/Wire/examples/i2c_scanner/i2c_scanner.ino
@@ -5,7 +5,7 @@
 //    This program (or code that looks like it)
 //    can be found in many places.
 //    For example on the Arduino.cc forum.
-//    The original author is not know.
+//    The original author is not known.
 // Version 2, Juni 2012, Using Arduino 1.0.1
 //     Adapted to be as simple as possible by Arduino.cc user Krodal
 // Version 3, Feb 26  2013
@@ -33,7 +33,7 @@ void setup() {
   Wire.begin();
 
   Serial.begin(9600);
-  while (!Serial); // Leonardo: wait for serial monitor
+  while (!Serial); // Leonardo: wait for Serial Monitor
   Serial.println("\nI2C Scanner");
 }
 
@@ -44,7 +44,7 @@ void loop() {
 
   for (byte address = 1; address < 127; ++address) {
     // The i2c_scanner uses the return value of
-    // the Write.endTransmisstion to see if
+    // the Wire.endTransmission to see if
     // a device did acknowledge to the address.
     Wire.beginTransmission(address);
     byte error = Wire.endTransmission();
diff --git a/libraries/Wire/examples/master_reader/master_reader.ino b/libraries/Wire/examples/master_reader/master_reader.ino
index ecab72a..e27cac3 100644
--- a/libraries/Wire/examples/master_reader/master_reader.ino
+++ b/libraries/Wire/examples/master_reader/master_reader.ino
@@ -13,7 +13,7 @@
 #include <Wire.h>
 
 void setup() {
-  Wire.begin();        // join i2c bus (address optional for master)
+  Wire.begin();        // join I2C bus (address optional for master)
   Serial.begin(9600);  // start serial for output
 }
 
diff --git a/libraries/Wire/examples/master_writer/master_writer.ino b/libraries/Wire/examples/master_writer/master_writer.ino
index 5cbea11..7a17668 100644
--- a/libraries/Wire/examples/master_writer/master_writer.ino
+++ b/libraries/Wire/examples/master_writer/master_writer.ino
@@ -13,7 +13,7 @@
 #include <Wire.h>
 
 void setup() {
-  Wire.begin(); // join i2c bus (address optional for master)
+  Wire.begin(); // join I2C bus (address optional for master)
 }
 
 byte x = 0;
diff --git a/libraries/Wire/examples/slave_receiver/slave_receiver.ino b/libraries/Wire/examples/slave_receiver/slave_receiver.ino
index 8051d53..9b3f814 100644
--- a/libraries/Wire/examples/slave_receiver/slave_receiver.ino
+++ b/libraries/Wire/examples/slave_receiver/slave_receiver.ino
@@ -13,7 +13,7 @@
 #include <Wire.h>
 
 void setup() {
-  Wire.begin(8);                // join i2c bus with address #8
+  Wire.begin(8);                // join I2C bus with address #8
   Wire.onReceive(receiveEvent); // register event
   Serial.begin(9600);           // start serial for output
 }
diff --git a/libraries/Wire/examples/slave_sender/slave_sender.ino b/libraries/Wire/examples/slave_sender/slave_sender.ino
index d2e72bb..6e2ed49 100644
--- a/libraries/Wire/examples/slave_sender/slave_sender.ino
+++ b/libraries/Wire/examples/slave_sender/slave_sender.ino
@@ -13,7 +13,7 @@
 #include <Wire.h>
 
 void setup() {
-  Wire.begin(8);                // join i2c bus with address #8
+  Wire.begin(8);                // join I2C bus with address #8
   Wire.onRequest(requestEvent); // register event
 }
 
diff --git a/libraries/Wire/src/Wire.cpp b/libraries/Wire/src/Wire.cpp
index c407776..001d924 100644
--- a/libraries/Wire/src/Wire.cpp
+++ b/libraries/Wire/src/Wire.cpp
@@ -100,7 +100,7 @@ void TwoWire::setClock(uint32_t clock)
  * when `clearWireTimeoutFlag()` or `setWireTimeoutUs()` is called.
  *
  * Note that this timeout can also trigger while waiting for clock stretching or waiting for a second master
- * to complete its transaction. So make sure to adapt the timeout to accomodate for those cases if needed.
+ * to complete its transaction. So make sure to adapt the timeout to accommodate for those cases if needed.
  * A typical timeout would be 25ms (which is the maximum clock stretching allowed by the SMBus protocol),
  * but (much) shorter values will usually also work.
  *
@@ -120,7 +120,7 @@ void TwoWire::setWireTimeout(uint32_t timeout, bool reset_with_timeout){
 /***
  * Returns the TWI timeout flag.
  *
- * @return true if timeout has occured since the flag was last cleared.
+ * @return true if timeout has occurred since the flag was last cleared.
  */
 bool TwoWire::getWireTimeoutFlag(void){
   return(twi_manageTimeoutFlag(false));
diff --git a/libraries/Wire/src/utility/twi.c b/libraries/Wire/src/utility/twi.c
index d223760..e09a33c 100644
--- a/libraries/Wire/src/utility/twi.c
+++ b/libraries/Wire/src/utility/twi.c
@@ -175,7 +175,7 @@ uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length, uint8_t sen
   }
   twi_state = TWI_MRX;
   twi_sendStop = sendStop;
-  // reset error state (0xFF.. no error occured)
+  // reset error state (0xFF.. no error occurred)
   twi_error = 0xFF;
 
   // initialize buffer iteration vars
@@ -183,7 +183,7 @@ uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length, uint8_t sen
   twi_masterBufferLength = length-1;  // This is not intuitive, read on...
   // On receive, the previously configured ACK/NACK setting is transmitted in
   // response to the received byte before the interrupt is signalled. 
-  // Therefor we must actually set NACK when the _next_ to last byte is
+  // Therefore we must actually set NACK when the _next_ to last byte is
   // received, causing that NACK to be sent in response to receiving the last
   // expected byte of data.
 
@@ -269,7 +269,7 @@ uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait
   }
   twi_state = TWI_MTX;
   twi_sendStop = sendStop;
-  // reset error state (0xFF.. no error occured)
+  // reset error state (0xFF.. no error occurred)
   twi_error = 0xFF;
 
   // initialize buffer iteration vars
@@ -294,7 +294,7 @@ uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait
     // We need to remove ourselves from the repeated start state before we enable interrupts,
     // since the ISR is ASYNC, and we could get confused if we hit the ISR before cleaning
     // up. Also, don't enable the START interrupt. There may be one pending from the 
-    // repeated start that we sent outselves, and that would really confuse things.
+    // repeated start that we sent ourselves, and that would really confuse things.
     twi_inRepStart = false;			// remember, we're dealing with an ASYNC ISR
     startMicros = micros();
     do {
@@ -411,7 +411,7 @@ void twi_stop(void)
   // send stop condition
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
 
-  // wait for stop condition to be exectued on bus
+  // wait for stop condition to be executed on bus
   // TWINT is not set after a stop condition!
   // We cannot use micros() from an ISR, so approximate the timeout with cycle-counted delays
   const uint8_t us_per_loop = 8;