Moved SD lib into root libraries folder

6 files changed, 0 insertions, 534 deletions

diff --git a/libraries/SD/examples/CardInfo/CardInfo.ino b/libraries/SD/examples/CardInfo/CardInfo.ino
deleted file mode 100644
index 0c2dfc5..0000000
--- a/libraries/SD/examples/CardInfo/CardInfo.ino
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
-  SD card test 
-   
- This example shows how use the utility libraries on which the'
- SD library is based in order to get info about your SD card.
- Very useful for testing a card when you're not sure whether its working or not.
- 	
- The circuit:
-  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila
- ** MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila
- ** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila
- ** CS - depends on your SD card shield or module. 
- 		Pin 4 used here for consistency with other Arduino examples
-
- 
- created  28 Mar 2011
- by Limor Fried 
- modified 9 Apr 2012
- by Tom Igoe
- */
- // include the SD library:
-#include <SD.h>
-
-// set up variables using the SD utility library functions:
-Sd2Card card;
-SdVolume volume;
-SdFile root;
-
-// change this to match your SD shield or module;
-// Arduino Ethernet shield: pin 4
-// Adafruit SD shields and modules: pin 10
-// Sparkfun SD shield: pin 8
-const int chipSelect = 4;    
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("\nInitializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);     // change this to 53 on a mega
-
-
-  // we'll use the initialization code from the utility libraries
-  // since we're just testing if the card is working!
-  if (!card.init(SPI_HALF_SPEED, chipSelect)) {
-    Serial.println("initialization failed. Things to check:");
-    Serial.println("* is a card is inserted?");
-    Serial.println("* Is your wiring correct?");
-    Serial.println("* did you change the chipSelect pin to match your shield or module?");
-    return;
-  } else {
-   Serial.println("Wiring is correct and a card is present."); 
-  }
-
-  // print the type of card
-  Serial.print("\nCard type: ");
-  switch(card.type()) {
-    case SD_CARD_TYPE_SD1:
-      Serial.println("SD1");
-      break;
-    case SD_CARD_TYPE_SD2:
-      Serial.println("SD2");
-      break;
-    case SD_CARD_TYPE_SDHC:
-      Serial.println("SDHC");
-      break;
-    default:
-      Serial.println("Unknown");
-  }
-
-  // Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32
-  if (!volume.init(card)) {
-    Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
-    return;
-  }
-
-
-  // print the type and size of the first FAT-type volume
-  uint32_t volumesize;
-  Serial.print("\nVolume type is FAT");
-  Serial.println(volume.fatType(), DEC);
-  Serial.println();
-  
-  volumesize = volume.blocksPerCluster();    // clusters are collections of blocks
-  volumesize *= volume.clusterCount();       // we'll have a lot of clusters
-  volumesize *= 512;                            // SD card blocks are always 512 bytes
-  Serial.print("Volume size (bytes): ");
-  Serial.println(volumesize);
-  Serial.print("Volume size (Kbytes): ");
-  volumesize /= 1024;
-  Serial.println(volumesize);
-  Serial.print("Volume size (Mbytes): ");
-  volumesize /= 1024;
-  Serial.println(volumesize);
-
-  
-  Serial.println("\nFiles found on the card (name, date and size in bytes): ");
-  root.openRoot(volume);
-  
-  // list all files in the card with date and size
-  root.ls(LS_R | LS_DATE | LS_SIZE);
-}
-
-
-void loop(void) {
-  
-}
diff --git a/libraries/SD/examples/Datalogger/Datalogger.ino b/libraries/SD/examples/Datalogger/Datalogger.ino
deleted file mode 100644
index a7f85ee..0000000
--- a/libraries/SD/examples/Datalogger/Datalogger.ino
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-  SD card datalogger
- 
- This example shows how to log data from three analog sensors 
- to an SD card using the SD library.
- 	
- The circuit:
- * analog sensors on analog ins 0, 1, and 2
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created  24 Nov 2010
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-
-#include <SD.h>
-
-// On the Ethernet Shield, CS is pin 4. Note that even if it's not
-// used as the CS pin, the hardware CS pin (10 on most Arduino boards,
-// 53 on the Mega) must be left as an output or the SD library
-// functions will not work.
-const int chipSelect = 4;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // make sure that the default chip select pin is set to
-  // output, even if you don't use it:
-  pinMode(10, OUTPUT);
-  
-  // see if the card is present and can be initialized:
-  if (!SD.begin(chipSelect)) {
-    Serial.println("Card failed, or not present");
-    // don't do anything more:
-    return;
-  }
-  Serial.println("card initialized.");
-}
-
-void loop()
-{
-  // make a string for assembling the data to log:
-  String dataString = "";
-
-  // read three sensors and append to the string:
-  for (int analogPin = 0; analogPin < 3; analogPin++) {
-    int sensor = analogRead(analogPin);
-    dataString += String(sensor);
-    if (analogPin < 2) {
-      dataString += ","; 
-    }
-  }
-
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  File dataFile = SD.open("datalog.txt", FILE_WRITE);
-
-  // if the file is available, write to it:
-  if (dataFile) {
-    dataFile.println(dataString);
-    dataFile.close();
-    // print to the serial port too:
-    Serial.println(dataString);
-  }  
-  // if the file isn't open, pop up an error:
-  else {
-    Serial.println("error opening datalog.txt");
-  } 
-}
-
-
-
-
-
-
-
-
-
diff --git a/libraries/SD/examples/DumpFile/DumpFile.ino b/libraries/SD/examples/DumpFile/DumpFile.ino
deleted file mode 100644
index d83089a..0000000
--- a/libraries/SD/examples/DumpFile/DumpFile.ino
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-  SD card file dump
- 
- This example shows how to read a file from the SD card using the
- SD library and send it over the serial port.
- 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created  22 December 2010
- by Limor Fried
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-
-#include <SD.h>
-
-// On the Ethernet Shield, CS is pin 4. Note that even if it's not
-// used as the CS pin, the hardware CS pin (10 on most Arduino boards,
-// 53 on the Mega) must be left as an output or the SD library
-// functions will not work.
-const int chipSelect = 4;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // make sure that the default chip select pin is set to
-  // output, even if you don't use it:
-  pinMode(10, OUTPUT);
-  
-  // see if the card is present and can be initialized:
-  if (!SD.begin(chipSelect)) {
-    Serial.println("Card failed, or not present");
-    // don't do anything more:
-    return;
-  }
-  Serial.println("card initialized.");
-  
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  File dataFile = SD.open("datalog.txt");
-
-  // if the file is available, write to it:
-  if (dataFile) {
-    while (dataFile.available()) {
-      Serial.write(dataFile.read());
-    }
-    dataFile.close();
-  }  
-  // if the file isn't open, pop up an error:
-  else {
-    Serial.println("error opening datalog.txt");
-  } 
-}
-
-void loop()
-{
-}
-
diff --git a/libraries/SD/examples/Files/Files.ino b/libraries/SD/examples/Files/Files.ino
deleted file mode 100644
index a15b862..0000000
--- a/libraries/SD/examples/Files/Files.ino
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-  SD card basic file example
- 
- This example shows how to create and destroy an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-#include <SD.h>
-
-File myFile;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);
-
-  if (!SD.begin(4)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-
-  if (SD.exists("example.txt")) {
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");
-  }
-
-  // open a new file and immediately close it:
-  Serial.println("Creating example.txt...");
-  myFile = SD.open("example.txt", FILE_WRITE);
-  myFile.close();
-
-  // Check to see if the file exists: 
-  if (SD.exists("example.txt")) {
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");  
-  }
-
-  // delete the file:
-  Serial.println("Removing example.txt...");
-  SD.remove("example.txt");
-
-  if (SD.exists("example.txt")){ 
-    Serial.println("example.txt exists.");
-  }
-  else {
-    Serial.println("example.txt doesn't exist.");  
-  }
-}
-
-void loop()
-{
-  // nothing happens after setup finishes.
-}
-
-
-
diff --git a/libraries/SD/examples/ReadWrite/ReadWrite.ino b/libraries/SD/examples/ReadWrite/ReadWrite.ino
deleted file mode 100644
index 5805fc8..0000000
--- a/libraries/SD/examples/ReadWrite/ReadWrite.ino
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-  SD card read/write
- 
- This example shows how to read and write data to and from an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
- 
-#include <SD.h>
-
-File myFile;
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-   pinMode(10, OUTPUT);
-   
-  if (!SD.begin(4)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-  
-  // open the file. note that only one file can be open at a time,
-  // so you have to close this one before opening another.
-  myFile = SD.open("test.txt", FILE_WRITE);
-  
-  // if the file opened okay, write to it:
-  if (myFile) {
-    Serial.print("Writing to test.txt...");
-    myFile.println("testing 1, 2, 3.");
-	// close the file:
-    myFile.close();
-    Serial.println("done.");
-  } else {
-    // if the file didn't open, print an error:
-    Serial.println("error opening test.txt");
-  }
-  
-  // re-open the file for reading:
-  myFile = SD.open("test.txt");
-  if (myFile) {
-    Serial.println("test.txt:");
-    
-    // read from the file until there's nothing else in it:
-    while (myFile.available()) {
-    	Serial.write(myFile.read());
-    }
-    // close the file:
-    myFile.close();
-  } else {
-  	// if the file didn't open, print an error:
-    Serial.println("error opening test.txt");
-  }
-}
-
-void loop()
-{
-	// nothing happens after setup
-}
-
-
diff --git a/libraries/SD/examples/listfiles/listfiles.ino b/libraries/SD/examples/listfiles/listfiles.ino
deleted file mode 100644
index 876c3f8..0000000
--- a/libraries/SD/examples/listfiles/listfiles.ino
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-  SD card basic file example
- 
- This example shows how to create and destroy an SD card file 	
- The circuit:
- * SD card attached to SPI bus as follows:
- ** MOSI - pin 11
- ** MISO - pin 12
- ** CLK - pin 13
- ** CS - pin 4
- 
- created   Nov 2010
- by David A. Mellis
- modified 9 Apr 2012
- by Tom Igoe
- 
- This example code is in the public domain.
- 	 
- */
-#include <SD.h>
-
-File root;
-
-void setup()
-{
-  // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("Initializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);
-
-  if (!SD.begin(10)) {
-    Serial.println("initialization failed!");
-    return;
-  }
-  Serial.println("initialization done.");
-
-  root = SD.open("/");
-  
-  printDirectory(root, 0);
-  
-  Serial.println("done!");
-}
-
-void loop()
-{
-  // nothing happens after setup finishes.
-}
-
-void printDirectory(File dir, int numTabs) {
-   while(true) {
-     
-     File entry =  dir.openNextFile();
-     if (! entry) {
-       // no more files
-       //Serial.println("**nomorefiles**");
-       break;
-     }
-     for (uint8_t i=0; i<numTabs; i++) {
-       Serial.print('\t');
-     }
-     Serial.print(entry.name());
-     if (entry.isDirectory()) {
-       Serial.println("/");
-       printDirectory(entry, numTabs+1);
-     } else {
-       // files have sizes, directories do not
-       Serial.print("\t\t");
-       Serial.println(entry.size(), DEC);
-     }
-   }
-}
-
-
-