From 5f8b79d4e2b1398cd5a39ba841fb5a0de0c2078c Mon Sep 17 00:00:00 2001 From: Cristian Maglie Date: Mon, 24 Sep 2012 12:42:23 +0200 Subject: Moved SD lib into root libraries folder --- libraries/SD/examples/CardInfo/CardInfo.ino | 117 ------------------------ libraries/SD/examples/Datalogger/Datalogger.ino | 92 ------------------- libraries/SD/examples/DumpFile/DumpFile.ino | 73 --------------- libraries/SD/examples/Files/Files.ino | 84 ----------------- libraries/SD/examples/ReadWrite/ReadWrite.ino | 85 ----------------- libraries/SD/examples/listfiles/listfiles.ino | 83 ----------------- 6 files changed, 534 deletions(-) delete mode 100644 libraries/SD/examples/CardInfo/CardInfo.ino delete mode 100644 libraries/SD/examples/Datalogger/Datalogger.ino delete mode 100644 libraries/SD/examples/DumpFile/DumpFile.ino delete mode 100644 libraries/SD/examples/Files/Files.ino delete mode 100644 libraries/SD/examples/ReadWrite/ReadWrite.ino delete mode 100644 libraries/SD/examples/listfiles/listfiles.ino (limited to 'libraries/SD/examples') diff --git a/libraries/SD/examples/CardInfo/CardInfo.ino b/libraries/SD/examples/CardInfo/CardInfo.ino deleted file mode 100644 index 0c2dfc5..0000000 --- a/libraries/SD/examples/CardInfo/CardInfo.ino +++ /dev/null @@ -1,117 +0,0 @@ -/* - SD card test - - This example shows how use the utility libraries on which the' - SD library is based in order to get info about your SD card. - Very useful for testing a card when you're not sure whether its working or not. - - The circuit: - * SD card attached to SPI bus as follows: - ** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila - ** MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila - ** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila - ** CS - depends on your SD card shield or module. - Pin 4 used here for consistency with other Arduino examples - - - created 28 Mar 2011 - by Limor Fried - modified 9 Apr 2012 - by Tom Igoe - */ - // include the SD library: -#include - -// set up variables using the SD utility library functions: -Sd2Card card; -SdVolume volume; -SdFile root; - -// change this to match your SD shield or module; -// Arduino Ethernet shield: pin 4 -// Adafruit SD shields and modules: pin 10 -// Sparkfun SD shield: pin 8 -const int chipSelect = 4; - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.print("\nInitializing SD card..."); - // On the Ethernet Shield, CS is pin 4. It's set as an output by default. - // Note that even if it's not used as the CS pin, the hardware SS pin - // (10 on most Arduino boards, 53 on the Mega) must be left as an output - // or the SD library functions will not work. - pinMode(10, OUTPUT); // change this to 53 on a mega - - - // we'll use the initialization code from the utility libraries - // since we're just testing if the card is working! - if (!card.init(SPI_HALF_SPEED, chipSelect)) { - Serial.println("initialization failed. Things to check:"); - Serial.println("* is a card is inserted?"); - Serial.println("* Is your wiring correct?"); - Serial.println("* did you change the chipSelect pin to match your shield or module?"); - return; - } else { - Serial.println("Wiring is correct and a card is present."); - } - - // print the type of card - Serial.print("\nCard type: "); - switch(card.type()) { - case SD_CARD_TYPE_SD1: - Serial.println("SD1"); - break; - case SD_CARD_TYPE_SD2: - Serial.println("SD2"); - break; - case SD_CARD_TYPE_SDHC: - Serial.println("SDHC"); - break; - default: - Serial.println("Unknown"); - } - - // Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32 - if (!volume.init(card)) { - Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card"); - return; - } - - - // print the type and size of the first FAT-type volume - uint32_t volumesize; - Serial.print("\nVolume type is FAT"); - Serial.println(volume.fatType(), DEC); - Serial.println(); - - volumesize = volume.blocksPerCluster(); // clusters are collections of blocks - volumesize *= volume.clusterCount(); // we'll have a lot of clusters - volumesize *= 512; // SD card blocks are always 512 bytes - Serial.print("Volume size (bytes): "); - Serial.println(volumesize); - Serial.print("Volume size (Kbytes): "); - volumesize /= 1024; - Serial.println(volumesize); - Serial.print("Volume size (Mbytes): "); - volumesize /= 1024; - Serial.println(volumesize); - - - Serial.println("\nFiles found on the card (name, date and size in bytes): "); - root.openRoot(volume); - - // list all files in the card with date and size - root.ls(LS_R | LS_DATE | LS_SIZE); -} - - -void loop(void) { - -} diff --git a/libraries/SD/examples/Datalogger/Datalogger.ino b/libraries/SD/examples/Datalogger/Datalogger.ino deleted file mode 100644 index a7f85ee..0000000 --- a/libraries/SD/examples/Datalogger/Datalogger.ino +++ /dev/null @@ -1,92 +0,0 @@ -/* - SD card datalogger - - This example shows how to log data from three analog sensors - to an SD card using the SD library. - - The circuit: - * analog sensors on analog ins 0, 1, and 2 - * SD card attached to SPI bus as follows: - ** MOSI - pin 11 - ** MISO - pin 12 - ** CLK - pin 13 - ** CS - pin 4 - - created 24 Nov 2010 - modified 9 Apr 2012 - by Tom Igoe - - This example code is in the public domain. - - */ - -#include - -// On the Ethernet Shield, CS is pin 4. Note that even if it's not -// used as the CS pin, the hardware CS pin (10 on most Arduino boards, -// 53 on the Mega) must be left as an output or the SD library -// functions will not work. -const int chipSelect = 4; - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.print("Initializing SD card..."); - // make sure that the default chip select pin is set to - // output, even if you don't use it: - pinMode(10, OUTPUT); - - // see if the card is present and can be initialized: - if (!SD.begin(chipSelect)) { - Serial.println("Card failed, or not present"); - // don't do anything more: - return; - } - Serial.println("card initialized."); -} - -void loop() -{ - // make a string for assembling the data to log: - String dataString = ""; - - // read three sensors and append to the string: - for (int analogPin = 0; analogPin < 3; analogPin++) { - int sensor = analogRead(analogPin); - dataString += String(sensor); - if (analogPin < 2) { - dataString += ","; - } - } - - // open the file. note that only one file can be open at a time, - // so you have to close this one before opening another. - File dataFile = SD.open("datalog.txt", FILE_WRITE); - - // if the file is available, write to it: - if (dataFile) { - dataFile.println(dataString); - dataFile.close(); - // print to the serial port too: - Serial.println(dataString); - } - // if the file isn't open, pop up an error: - else { - Serial.println("error opening datalog.txt"); - } -} - - - - - - - - - diff --git a/libraries/SD/examples/DumpFile/DumpFile.ino b/libraries/SD/examples/DumpFile/DumpFile.ino deleted file mode 100644 index d83089a..0000000 --- a/libraries/SD/examples/DumpFile/DumpFile.ino +++ /dev/null @@ -1,73 +0,0 @@ -/* - SD card file dump - - This example shows how to read a file from the SD card using the - SD library and send it over the serial port. - - The circuit: - * SD card attached to SPI bus as follows: - ** MOSI - pin 11 - ** MISO - pin 12 - ** CLK - pin 13 - ** CS - pin 4 - - created 22 December 2010 - by Limor Fried - modified 9 Apr 2012 - by Tom Igoe - - This example code is in the public domain. - - */ - -#include - -// On the Ethernet Shield, CS is pin 4. Note that even if it's not -// used as the CS pin, the hardware CS pin (10 on most Arduino boards, -// 53 on the Mega) must be left as an output or the SD library -// functions will not work. -const int chipSelect = 4; - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.print("Initializing SD card..."); - // make sure that the default chip select pin is set to - // output, even if you don't use it: - pinMode(10, OUTPUT); - - // see if the card is present and can be initialized: - if (!SD.begin(chipSelect)) { - Serial.println("Card failed, or not present"); - // don't do anything more: - return; - } - Serial.println("card initialized."); - - // open the file. note that only one file can be open at a time, - // so you have to close this one before opening another. - File dataFile = SD.open("datalog.txt"); - - // if the file is available, write to it: - if (dataFile) { - while (dataFile.available()) { - Serial.write(dataFile.read()); - } - dataFile.close(); - } - // if the file isn't open, pop up an error: - else { - Serial.println("error opening datalog.txt"); - } -} - -void loop() -{ -} - diff --git a/libraries/SD/examples/Files/Files.ino b/libraries/SD/examples/Files/Files.ino deleted file mode 100644 index a15b862..0000000 --- a/libraries/SD/examples/Files/Files.ino +++ /dev/null @@ -1,84 +0,0 @@ -/* - SD card basic file example - - This example shows how to create and destroy an SD card file - The circuit: - * SD card attached to SPI bus as follows: - ** MOSI - pin 11 - ** MISO - pin 12 - ** CLK - pin 13 - ** CS - pin 4 - - created Nov 2010 - by David A. Mellis - modified 9 Apr 2012 - by Tom Igoe - - This example code is in the public domain. - - */ -#include - -File myFile; - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.print("Initializing SD card..."); - // On the Ethernet Shield, CS is pin 4. It's set as an output by default. - // Note that even if it's not used as the CS pin, the hardware SS pin - // (10 on most Arduino boards, 53 on the Mega) must be left as an output - // or the SD library functions will not work. - pinMode(10, OUTPUT); - - if (!SD.begin(4)) { - Serial.println("initialization failed!"); - return; - } - Serial.println("initialization done."); - - if (SD.exists("example.txt")) { - Serial.println("example.txt exists."); - } - else { - Serial.println("example.txt doesn't exist."); - } - - // open a new file and immediately close it: - Serial.println("Creating example.txt..."); - myFile = SD.open("example.txt", FILE_WRITE); - myFile.close(); - - // Check to see if the file exists: - if (SD.exists("example.txt")) { - Serial.println("example.txt exists."); - } - else { - Serial.println("example.txt doesn't exist."); - } - - // delete the file: - Serial.println("Removing example.txt..."); - SD.remove("example.txt"); - - if (SD.exists("example.txt")){ - Serial.println("example.txt exists."); - } - else { - Serial.println("example.txt doesn't exist."); - } -} - -void loop() -{ - // nothing happens after setup finishes. -} - - - diff --git a/libraries/SD/examples/ReadWrite/ReadWrite.ino b/libraries/SD/examples/ReadWrite/ReadWrite.ino deleted file mode 100644 index 5805fc8..0000000 --- a/libraries/SD/examples/ReadWrite/ReadWrite.ino +++ /dev/null @@ -1,85 +0,0 @@ -/* - SD card read/write - - This example shows how to read and write data to and from an SD card file - The circuit: - * SD card attached to SPI bus as follows: - ** MOSI - pin 11 - ** MISO - pin 12 - ** CLK - pin 13 - ** CS - pin 4 - - created Nov 2010 - by David A. Mellis - modified 9 Apr 2012 - by Tom Igoe - - This example code is in the public domain. - - */ - -#include - -File myFile; - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.print("Initializing SD card..."); - // On the Ethernet Shield, CS is pin 4. It's set as an output by default. - // Note that even if it's not used as the CS pin, the hardware SS pin - // (10 on most Arduino boards, 53 on the Mega) must be left as an output - // or the SD library functions will not work. - pinMode(10, OUTPUT); - - if (!SD.begin(4)) { - Serial.println("initialization failed!"); - return; - } - Serial.println("initialization done."); - - // open the file. note that only one file can be open at a time, - // so you have to close this one before opening another. - myFile = SD.open("test.txt", FILE_WRITE); - - // if the file opened okay, write to it: - if (myFile) { - Serial.print("Writing to test.txt..."); - myFile.println("testing 1, 2, 3."); - // close the file: - myFile.close(); - Serial.println("done."); - } else { - // if the file didn't open, print an error: - Serial.println("error opening test.txt"); - } - - // re-open the file for reading: - myFile = SD.open("test.txt"); - if (myFile) { - Serial.println("test.txt:"); - - // read from the file until there's nothing else in it: - while (myFile.available()) { - Serial.write(myFile.read()); - } - // close the file: - myFile.close(); - } else { - // if the file didn't open, print an error: - Serial.println("error opening test.txt"); - } -} - -void loop() -{ - // nothing happens after setup -} - - diff --git a/libraries/SD/examples/listfiles/listfiles.ino b/libraries/SD/examples/listfiles/listfiles.ino deleted file mode 100644 index 876c3f8..0000000 --- a/libraries/SD/examples/listfiles/listfiles.ino +++ /dev/null @@ -1,83 +0,0 @@ -/* - SD card basic file example - - This example shows how to create and destroy an SD card file - The circuit: - * SD card attached to SPI bus as follows: - ** MOSI - pin 11 - ** MISO - pin 12 - ** CLK - pin 13 - ** CS - pin 4 - - created Nov 2010 - by David A. Mellis - modified 9 Apr 2012 - by Tom Igoe - - This example code is in the public domain. - - */ -#include - -File root; - -void setup() -{ - // Open serial communications and wait for port to open: - Serial.begin(9600); - while (!Serial) { - ; // wait for serial port to connect. Needed for Leonardo only - } - - - Serial.print("Initializing SD card..."); - // On the Ethernet Shield, CS is pin 4. It's set as an output by default. - // Note that even if it's not used as the CS pin, the hardware SS pin - // (10 on most Arduino boards, 53 on the Mega) must be left as an output - // or the SD library functions will not work. - pinMode(10, OUTPUT); - - if (!SD.begin(10)) { - Serial.println("initialization failed!"); - return; - } - Serial.println("initialization done."); - - root = SD.open("/"); - - printDirectory(root, 0); - - Serial.println("done!"); -} - -void loop() -{ - // nothing happens after setup finishes. -} - -void printDirectory(File dir, int numTabs) { - while(true) { - - File entry = dir.openNextFile(); - if (! entry) { - // no more files - //Serial.println("**nomorefiles**"); - break; - } - for (uint8_t i=0; i