Moved SD lib into root libraries folder

1 files changed, 0 insertions, 117 deletions

diff --git a/libraries/SD/examples/CardInfo/CardInfo.ino b/libraries/SD/examples/CardInfo/CardInfo.ino
deleted file mode 100644
index 0c2dfc5..0000000
--- a/libraries/SD/examples/CardInfo/CardInfo.ino
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
-  SD card test 
-   
- This example shows how use the utility libraries on which the'
- SD library is based in order to get info about your SD card.
- Very useful for testing a card when you're not sure whether its working or not.
- 	
- The circuit:
-  * SD card attached to SPI bus as follows:
- ** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila
- ** MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila
- ** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila
- ** CS - depends on your SD card shield or module. 
- 		Pin 4 used here for consistency with other Arduino examples
-
- 
- created  28 Mar 2011
- by Limor Fried 
- modified 9 Apr 2012
- by Tom Igoe
- */
- // include the SD library:
-#include <SD.h>
-
-// set up variables using the SD utility library functions:
-Sd2Card card;
-SdVolume volume;
-SdFile root;
-
-// change this to match your SD shield or module;
-// Arduino Ethernet shield: pin 4
-// Adafruit SD shields and modules: pin 10
-// Sparkfun SD shield: pin 8
-const int chipSelect = 4;    
-
-void setup()
-{
- // Open serial communications and wait for port to open:
-  Serial.begin(9600);
-   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-
-  Serial.print("\nInitializing SD card...");
-  // On the Ethernet Shield, CS is pin 4. It's set as an output by default.
-  // Note that even if it's not used as the CS pin, the hardware SS pin 
-  // (10 on most Arduino boards, 53 on the Mega) must be left as an output 
-  // or the SD library functions will not work. 
-  pinMode(10, OUTPUT);     // change this to 53 on a mega
-
-
-  // we'll use the initialization code from the utility libraries
-  // since we're just testing if the card is working!
-  if (!card.init(SPI_HALF_SPEED, chipSelect)) {
-    Serial.println("initialization failed. Things to check:");
-    Serial.println("* is a card is inserted?");
-    Serial.println("* Is your wiring correct?");
-    Serial.println("* did you change the chipSelect pin to match your shield or module?");
-    return;
-  } else {
-   Serial.println("Wiring is correct and a card is present."); 
-  }
-
-  // print the type of card
-  Serial.print("\nCard type: ");
-  switch(card.type()) {
-    case SD_CARD_TYPE_SD1:
-      Serial.println("SD1");
-      break;
-    case SD_CARD_TYPE_SD2:
-      Serial.println("SD2");
-      break;
-    case SD_CARD_TYPE_SDHC:
-      Serial.println("SDHC");
-      break;
-    default:
-      Serial.println("Unknown");
-  }
-
-  // Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32
-  if (!volume.init(card)) {
-    Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
-    return;
-  }
-
-
-  // print the type and size of the first FAT-type volume
-  uint32_t volumesize;
-  Serial.print("\nVolume type is FAT");
-  Serial.println(volume.fatType(), DEC);
-  Serial.println();
-  
-  volumesize = volume.blocksPerCluster();    // clusters are collections of blocks
-  volumesize *= volume.clusterCount();       // we'll have a lot of clusters
-  volumesize *= 512;                            // SD card blocks are always 512 bytes
-  Serial.print("Volume size (bytes): ");
-  Serial.println(volumesize);
-  Serial.print("Volume size (Kbytes): ");
-  volumesize /= 1024;
-  Serial.println(volumesize);
-  Serial.print("Volume size (Mbytes): ");
-  volumesize /= 1024;
-  Serial.println(volumesize);
-
-  
-  Serial.println("\nFiles found on the card (name, date and size in bytes): ");
-  root.openRoot(volume);
-  
-  // list all files in the card with date and size
-  root.ls(LS_R | LS_DATE | LS_SIZE);
-}
-
-
-void loop(void) {
-  
-}