GSM library to the new format and some strings adaptations

15 files changed, 0 insertions, 1920 deletions

diff --git a/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino b/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino
deleted file mode 100644
index 2885c9b..0000000
--- a/libraries/GSM/examples/GSMPachubeClient/GSMPachubeClient.ino
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- GSM Pachube client
- 
- This sketch connects an analog sensor to Pachube (http://www.pachube.com)
- using a Telefonica GSM/GPRS shield.
-
- This example has been updated to use version 2.0 of the Pachube.com API. 
- To make it work, create a feed with a datastream, and give it the ID
- sensor1. Or change the code below to match your feed.
- 
- Circuit:
- * Analog sensor attached to analog in 0
- * GSM shield attached to an Arduino
- * SIM card with a data plan
- 
- created 4 March 2012
- by Tom Igoe
- and adapted for GSM shield by David Del Peral
- 
- This code is in the public domain.
- 
- http://arduino.cc/en/Tutorial/GSMExamplesPachubeClient
- 
- */
-
-// libraries
-#include <GSM.h>
-
-// Pachube Client data
-#define APIKEY         "YOUR API KEY GOES HERE"  // replace your pachube api key here
-#define FEEDID         00000                     // replace your feed ID
-#define USERAGENT      "My Project"              // user agent is the project name
-
-// PIN Number
-#define PINNUMBER ""
-
-// APN data
-#define GPRS_APN       "GPRS_APN"  // replace your GPRS APN
-#define GPRS_LOGIN     "login"     // replace with your GPRS login
-#define GPRS_PASSWORD  "password"  // replace with your GPRS password
-
-// initialize the library instance:
-GSMClient client;
-GPRS gprs;
-GSM gsmAccess;
-
-// if you don't want to use DNS (and reduce your sketch size)
-// use the numeric IP instead of the name for the server:
-// IPAddress server(216,52,233,121);    // numeric IP for api.pachube.com
-char server[] = "api.pachube.com";      // name address for pachube API
-
-unsigned long lastConnectionTime = 0;         // last time you connected to the server, in milliseconds
-boolean lastConnected = false;                  // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  //delay between updates to Pachube.com
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // After starting the modem with GSM.begin()
-  // attach the shield to the GPRS network with the APN, login and password
-  while(notConnected)
-  {
-    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
-        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-}
-
-void loop()
-{  
-  // read the analog sensor:
-  int sensorReading = analogRead(A0);   
-
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only:
-  if (client.available())
-  {
-     char c = client.read();
-     Serial.print(c);
-  }
-
-  // if there's no net connection, but there was one last time
-  // through the loop, then stop the client:
-  if (!client.connected() && lastConnected)
-  {
-    client.stop();
-  }
-  
-  // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data:
-  if(!client.connected() && ((millis() - lastConnectionTime) > postingInterval))
-  {
-  sendData(sensorReading);
-  }
-  
-  // store the state of the connection for next time through
-  // the loop:
-  lastConnected = client.connected();
-}
-
-/*
-  This method makes a HTTP connection to the server.
-*/
-void sendData(int thisData)
-{
-  // if there's a successful connection:
-  if (client.connect(server, 80))
-  {
-    Serial.println("connecting...");
-    
-    // send the HTTP PUT request:
-    client.print("PUT /v2/feeds/");
-    client.print(FEEDID);
-    client.println(".csv HTTP/1.1");
-    client.println("Host: api.pachube.com");
-    client.print("X-ApiKey: ");
-    client.println(APIKEY);
-    client.print("User-Agent: ");
-    client.println(USERAGENT);
-    client.print("Content-Length: ");
-
-    // calculate the length of the sensor reading in bytes:
-    // 8 bytes for "sensor1," + number of digits of the data:
-    int thisLength = 8 + getLength(thisData);
-    client.println(thisLength);
-
-    // last pieces of the HTTP PUT request:
-    client.println("Content-Type: text/csv");
-    client.println("Connection: close");
-    client.println();
-    
-    // here's the actual content of the PUT request:
-    client.print("sensor1,");
-    client.println(thisData);
-  } 
-  else
-  {
-    // if you couldn't make a connection:
-    Serial.println("connection failed");
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-  // note the time that the connection was made or attempted
-  lastConnectionTime = millis();
-}
-
-/*
-  This method calculates the number of digits in the
-  sensor reading.  Since each digit of the ASCII decimal
-  representation is a byte, the number of digits equals
-  the number of bytes.
-*/
-int getLength(int someValue)
-{
-  // there's at least one byte:
-  int digits = 1;
-  
-  // continually divide the value by ten, 
-  // adding one to the digit count for each
-  // time you divide, until you're at 0:
-  int dividend = someValue /10;
-  while (dividend > 0)
-  {
-    dividend = dividend /10;
-    digits++;
-  }
-  
-  // return the number of digits:
-  return digits;
-}
-
diff --git a/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino b/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino
deleted file mode 100644
index 9f6ea53..0000000
--- a/libraries/GSM/examples/GSMPachubeClientString/GSMPachubeClientString.ino
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- Pachube client with Strings
- 
- This sketch connects two analog sensors to Pachube (http://www.pachube.com)
- through a Telefonica GSM/GPRS shield.
- 
- This example has been updated to use version 2.0 of the Pachube.com API. 
- To make it work, create a feed with two datastreams, and give them the IDs
- sensor1 and sensor2. Or change the code below to match your feed.
- 
- This example uses the String library, which is part of the Arduino core from
- version 0019.  
- 
- Circuit:
- * Analog sensors attached to A0 and A1
- * GSM shield attached to an Arduino
- * SIM card with a data plan
- 
- created 8 March 2012
- by Tom Igoe
- and adapted for GSM shield by David Del Peral
- 
- This code is in the public domain.
- 
- */
-
-// Include the GSM library
-#include <GSM.h>
-
-// Pachube login information
-#define APIKEY         "YOUR API KEY GOES HERE"  // replace your pachube api key here
-#define FEEDID         00000                     // replace your feed ID
-#define USERAGENT      "My Project"              // user agent is the project name
-
-// PIN Number
-#define PINNUMBER ""
-
-// APN data
-#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
-#define GPRS_LOGIN     "login"    // replace with your GPRS login
-#define GPRS_PASSWORD  "password" // replace with your GPRS password
-
-// initialize the library instance
-GSMClient client;
-GPRS gprs;
-GSM gsmAccess;
-
-// if you don't want to use DNS (and reduce your sketch size)
-// use the numeric IP instead of the name for the server:
-// IPAddress server(216,52,233,121);     // numeric IP for api.pachube.com
-char server[] = "api.pachube.com";       // name address for Pachube API
-
-unsigned long lastConnectionTime = 0;           // last time you connected to the server, in milliseconds
-boolean lastConnected = false;                  // state of the connection last time through the main loop
-const unsigned long postingInterval = 10*1000;  // delay between updates to Pachube.com
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // After starting the modem with GSM.begin()
-  // attach the shield to the GPRS network with the APN, login and password 
-  while(notConnected)
-  {
-    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
-        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-
-  Serial.println("Connected to GPRS network");
-}
-
-void loop()
-{
-  // read the sensor on A0
-  int sensorReading = analogRead(A0); 
-  
-  // convert the data to a String
-  String dataString = "sensor1,";
-  dataString += sensorReading;
-
-  // you can append multiple readings to this String to 
-  // send the pachube feed multiple values
-  int otherSensorReading = analogRead(A1);
-  dataString += "\nsensor2,";
-  dataString += otherSensorReading;
-
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only
-  if (client.available())
-  {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // if there's no net connection, but there was one last time
-  // through the loop, then stop the client
-  if (!client.connected() && lastConnected)
-  {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-
-  // if you're not connected, and ten seconds have passed since
-  // your last connection, then connect again and send data
-  if(!client.connected() && (millis() - lastConnectionTime > postingInterval))
-  {
-    sendData(dataString);
-  }
-  // store the state of the connection for next time through
-  // the loop
-  lastConnected = client.connected();
-}
-
-// this method makes a HTTP connection to the server
-void sendData(String thisData)
-{
-  // if there's a successful connection:
-  if (client.connect(server, 80))
-  {
-    Serial.println("connecting...");
-    
-    // send the HTTP PUT request:
-    client.print("PUT /v2/feeds/");
-    client.print(FEEDID);
-    client.println(".csv HTTP/1.1");
-    client.println("Host: api.pachube.com");
-    client.print("X-ApiKey: ");
-    client.println(APIKEY);
-    client.print("User-Agent: ");
-    client.println(USERAGENT);
-    client.print("Content-Length: ");
-    client.println(thisData.length());
-
-    // last pieces of the HTTP PUT request
-    client.println("Content-Type: text/csv");
-    client.println("Connection: close");
-    client.println();
-    
-    // here's the actual content of the PUT request
-    client.println(thisData);
-  } 
-  else
-  {
-    // if you couldn't make a connection
-    Serial.println("connection failed");
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-  }
-  // note the time that the connection was made or attempted:
-  lastConnectionTime = millis();
-}
diff --git a/libraries/GSM/examples/GsmTwitterClient/GsmTwitterClient.ino b/libraries/GSM/examples/GsmTwitterClient/GsmTwitterClient.ino
deleted file mode 100644
index 3032141..0000000
--- a/libraries/GSM/examples/GsmTwitterClient/GsmTwitterClient.ino
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
-  GSM Twitter Client with Strings
- 
- This sketch connects to Twitter using an Arduino GSM shield. 
- It parses the XML returned, and looks for the string <text>this is a tweet</text>
- 
- This example uses the String library, which is part of the Arduino core from
- version 0019.  
- 
- Circuit:
- * GSM shield attached to an Arduino
- * SIM card with a data plan
- 
- created 8 Mar 2012
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/GSMExamplesTwitterClient
- 
- This code is in the public domain.
- 
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// APN data
-#define GPRS_APN       "APN" // replace your GPRS APN
-#define GPRS_LOGIN     "LOGIN" // replace with your GPRS login
-#define GPRS_PASSWORD  "PASSWORD" // replace with your GPRS password
-
-// initialize the library instance
-GSMClient client;
-GPRS gprs;
-GSM gsmAccess;
-
-const unsigned long requestInterval = 30*1000;    // delay between requests: 30 seconds
-
-// API Twitter URL
-char server[] = "api.twitter.com";
-
-boolean requested;                     // whether you've made a request since connecting
-unsigned long lastAttemptTime = 0;   // last time you connected to the server, in milliseconds
-
-String currentLine = "";               // string to hold the text from server
-String tweet = "";                     // string to hold the tweet
-boolean readingTweet = false;          // if you're currently reading the tweet
-
-void setup()
-{
-  // reserve space for the strings:
-  currentLine.reserve(256);
-  tweet.reserve(150);
-  
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-    
-  // connection state
-  boolean notConnected = true;
-  
-  // After starting the modem with GSM.begin()
-  // attach the shield to the GPRS network with the APN, login and password
-  while(notConnected)
-  {
-    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
-        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  Serial.println("Connected to GPRS network");
-  
-  Serial.println("connecting...");
-  connectToServer();
-}
-
-
-
-void loop()
-{
-  char c;
-  if (client.connected())
-  {
-    if (client.available())
-    {
-      // read incoming bytes:
-      char inChar = client.read();
-
-      // add incoming byte to end of line:
-      currentLine += inChar; 
-
-      // if you get a newline, clear the line:
-      if (inChar == '\n')
-      {
-        currentLine = "";
-      } 
-      
-      // if the current line ends with <text>, it will
-      // be followed by the tweet:
-      if (currentLine.endsWith("<text>"))
-      {
-        // tweet is beginning. Clear the tweet string:
-        readingTweet = true; 
-        tweet = "";
-      }
-      
-      // if you're currently reading the bytes of a tweet,
-      // add them to the tweet String:
-      if (readingTweet)
-      {
-        if (inChar != '<')
-        {
-          tweet += inChar;
-        } 
-        else
-        {
-          // if you got a "<" character,
-          // you've reached the end of the tweet:
-          readingTweet = false;
-          Serial.println(tweet);   
-        
-          // close the connection to the server:
-          client.stop(); 
-        }
-      }
-    }   
-  }
-  else if (millis() - lastAttemptTime > requestInterval)
-  {
-    // if you're not connected, and two minutes have passed since
-    // your last connection, then attempt to connect again:
-    connectToServer();
-  }
-}
-
-/*
-  Connect to API Twitter server and do a request for timeline
-*/
-void connectToServer()
-{
-  // attempt to connect, and wait a millisecond:
-  Serial.println("connecting to server...");
-  if (client.connect(server, 80))
-  {
-    Serial.println("making HTTP request...");
-    // make HTTP GET request to twitter:
-    client.println("GET /1/statuses/user_timeline.xml?screen_name=arduino&count=1 HTTP/1.1");
-    client.println("HOST: api.twitter.com");
-    client.println();
-  }
-  // note the time of this connect attempt:
-  lastAttemptTime = millis();
-}
diff --git a/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino b/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino
deleted file mode 100644
index e7eb275..0000000
--- a/libraries/GSM/examples/GsmWebClient/GsmWebClient.ino
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
-  Web client
- 
- This sketch connects to a website through a GSM shield. Specifically,
- this example downloads the URL "http://arduino.cc/asciilogo.txt" and 
- prints it to the Serial monitor.
- 
- Circuit:
- * GSM shield attached to an Arduino
- * SIM card with a data plan
- 
- created 8 Mar 2012
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/GSMExamplesWebClient
- 
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// APN data
-#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
-#define GPRS_LOGIN     "login"    // replace with your GPRS login
-#define GPRS_PASSWORD  "password" // replace with your GPRS password
-
-// initialize the library instance
-GSMClient client;
-GPRS gprs;
-GSM gsmAccess; 
-
-// URL, path & port (for example: arduino.cc)
-char server[] = "arduino.cc";
-char path[] = "/asciilogo.txt";
-int port = 80; // port 80 is the default for HTTP
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("Starting Arduino web client.");
-  // connection state
-  boolean notConnected = true;
-
-  // After starting the modem with GSM.begin()
-  // attach the shield to the GPRS network with the APN, login and password
-  while(notConnected)
-  {
-    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
-      (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-
-  Serial.println("connecting...");
-
-  // if you get a connection, report back via serial:
-  if (client.connect(server, port))
-  {
-    Serial.println("connected");
-    // Make a HTTP request:
-    client.print("GET ");
-    client.print(path);
-    client.println(" HTTP/1.1");
-    client.print("Host: ");
-    client.println(server);
-    client.println("Connection: close");
-    client.println();
-  } 
-  else
-  {
-    // if you didn't get a connection to the server:
-    Serial.println("connection failed");
-  }
-}
-
-void loop()
-{
-  // if there are incoming bytes available 
-  // from the server, read them and print them:
-  if (client.available())
-  {
-    char c = client.read();
-    Serial.print(c);
-  }
-
-  // if the server's disconnected, stop the client:
-  if (!client.available() && !client.connected())
-  {
-    Serial.println();
-    Serial.println("disconnecting.");
-    client.stop();
-
-    // do nothing forevermore:
-    for(;;)
-      ;
-  }
-}
diff --git a/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino b/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino
deleted file mode 100644
index e957b4c..0000000
--- a/libraries/GSM/examples/GsmWebServer/GsmWebServer.ino
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- GSM Web Server
- 
- A simple web server that shows the value of the analog input pins.
- using a GSM shield.
-
- Circuit:
- * GSM shield attached
- * Analog inputs attached to pins A0 through A5 (optional)
- 
- created 8 Mar 2012
- by Tom Igoe
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// APN data
-#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
-#define GPRS_LOGIN     "login"    // replace with your GPRS login
-#define GPRS_PASSWORD  "password" // replace with your GPRS password
-
-
-// initialize the library instance
-GPRS gprs;
-GSM gsmAccess;     // include a 'true' parameter for debug enabled
-GSMServer server(80); // port 80 (http default)
-
-// timeout
-const unsigned long __TIMEOUT__ = 10*1000;
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
-        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  Serial.println("Connected to GPRS network");
-  
-  // start server
-  server.begin();
-  
-  //Get IP.
-  IPAddress LocalIP = gprs.getIPAddress();
-  Serial.println("Server IP address=");
-  Serial.println(LocalIP);
-}
-
-void loop() {
-
-
-  // listen for incoming clients
-  GSMClient client = server.available();
-
-
-
-  if (client)
-  {  
-    while (client.connected())
-    {
-      if (client.available())
-      {
-        Serial.println("Receiving request!");
-        bool sendResponse = false;
-        while(char c=client.read()) {
-          if (c == '\n') sendResponse = true;
-        }
-
-     // if you've gotten to the end of the line (received a newline
-     // character) 
-       if (sendResponse)
-       {
-          // send a standard http response header
-          client.println("HTTP/1.1 200 OK");
-          client.println("Content-Type: text/html");
-          client.println();
-          client.println("<html>");
-          // output the value of each analog input pin
-          for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
-            client.print("analog input ");
-            client.print(analogChannel);
-            client.print(" is ");
-            client.print(analogRead(analogChannel));
-            client.println("<br />");       
-          }
-          client.println("</html>");
-          //necessary delay
-          delay(1000);
-          client.stop();
-        }
-      }
-    }
-  }
-}
-
-
diff --git a/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino b/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino
deleted file mode 100644
index 64df44a..0000000
--- a/libraries/GSM/examples/MakeVoiceCall/MakeVoiceCall.ino
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- Make Voice Call
- 
- This sketch, for the Arduino GSM shield, puts a voice call to
- a remote phone number that you enter through the serial monitor.
- To make it work, open the serial monitor, and when you see the 
- READY message, type a phone number. Make sure the serial monitor 
- is set to send a just newline when you press return.
- 
- Circuit:
- * GSM shield 
- * Voice circuit. 
- With no voice circuit the call will send nor receive any sound
- 
- 
- created Mar 2012
- by Javier Zorzano
- 
- This example is in the public domain.
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess; // include a 'true' parameter for debug enabled
-GSMVoiceCall vcs;
-
-String remoteNumber = "";  // the number you will call
-char charbuffer[20];
-
-void setup()
-{
-
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("Make Voice Call");
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  Serial.println("GSM initialized.");
-  Serial.println("Enter phone number to call.");
-
-}
-
-void loop()
-{
-
-  // add any incoming characters to the String:
-  while (Serial.available() > 0)
-  {
-    char inChar = Serial.read();
-    // if it's a newline, that means you should make the call:
-    if (inChar == '\n')
-    {
-      // make sure the phone number is not too long:
-      if (remoteNumber.length() < 20)
-      {
-        // let the user know you're calling:
-        Serial.print("Calling to : ");
-        Serial.println(remoteNumber);
-        Serial.println();
-
-        // Call the remote number
-        remoteNumber.toCharArray(charbuffer, 20);
-        
-        
-        // Check if the receiving end has picked up the call
-        if(vcs.voiceCall(charbuffer))
-        {
-          Serial.println("Call Established. Enter line to end");
-          // Wait for some input from the line
-          while(Serial.read()!='\n' && (vcs.getvoiceCallStatus()==TALKING));          
-          // And hang up
-          vcs.hangCall();
-        }
-        Serial.println("Call Finished");
-        remoteNumber="";
-        Serial.println("Enter phone number to call.");
-      } 
-      else
-      {
-        Serial.println("That's too long for a phone number. I'm forgetting it"); 
-        remoteNumber = "";
-      }
-    } 
-    else
-    {
-      // add the latest character to the message to send:
-      if(inChar!='\r')
-        remoteNumber += inChar;
-    }
-  } 
-}
-
diff --git a/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino b/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino
deleted file mode 100644
index af800f4..0000000
--- a/libraries/GSM/examples/ReceiveSMS/ReceiveSMS.ino
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- SMS receiver
- 
- This sketch, for the Arduino GSM shield, waits for a SMS message 
- and displays it through the Serial port. 
- 
- Circuit:
- * GSM shield attached to and Arduino
- * SIM card that can receive SMS messages
- 
- created 25 Feb 2012
- by Javier Zorzano / TD
- 
- This example is in the public domain.
- 
- http://arduino.cc/en/Tutorial/GSMExamplesReceiveSMS
- 
-*/
-
-// include the GSM library
-#include <GSM.h>
-
-// PIN Number for the SIM
-#define PINNUMBER ""
-
-// initialize the library instances
-GSM gsmAccess;
-GSM_SMS sms;
-
-// Array to hold the number a SMS is retreived from
-char senderNumber[20];  
-
-void setup() 
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  } 
-
-  Serial.println("SMS Messages Receiver");
-    
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM connection
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  Serial.println("GSM initialized");
-  Serial.println("Waiting for messages");
-}
-
-void loop() 
-{
-  char c;
-  
-  // If there are any SMSs available()  
-  if (sms.available())
-  {
-    Serial.println("Message received from:");
-    
-    // Get remote number
-    sms.remoteNumber(senderNumber, 20);
-    Serial.println(senderNumber);
-
-    // An example of message disposal    
-    // Any messages starting with # should be discarded
-    if(sms.peek()=='#')
-    {
-      Serial.println("Discarded SMS");
-      sms.flush();
-    }
-    
-    // Read message bytes and print them
-    while(c=sms.read())
-      Serial.print(c);
-      
-    Serial.println("\nEND OF MESSAGE");
-    
-    // Delete message from modem memory
-    sms.flush();
-    Serial.println("MESSAGE DELETED");
-  }
-
-  delay(1000);
-
-}
-
-
diff --git a/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino b/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino
deleted file mode 100644
index 14dbc5e..0000000
--- a/libraries/GSM/examples/ReceiveVoiceCall/ReceiveVoiceCall.ino
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- Receive Voice Call
- 
- This sketch, for the Arduino GSM shield, receives voice calls, 
- displays the calling number, waits a few seconds then hangs up.
- 
- Circuit:
- * GSM shield 
- * Voice circuit. Refer to to the GSM shield getting started guide
-   at http://arduino.cc/en/Guide/ArduinoGSMShield#toc11
- * SIM card that can accept voice calls
- 
- With no voice circuit the call will connect, but will not send or receive sound
-  
- created Mar 2012
- by Javier Zorzano
- 
- This example is in the public domain.
- 
- http://arduino.cc/en/Tutorial/GSMExamplesReceiveVoiceCall
- 
- */
-
-// Include the GSM library
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess;
-GSMVoiceCall vcs;
-
-// Array to hold the number for the incoming call
-char numtel[20];           
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("Receive Voice Call");
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  // This makes sure the modem correctly reports incoming events
-  vcs.hangCall();
-  
-  Serial.println("Waiting for a call");
-}
-
-void loop()
-{
-  // Check the status of the voice call
-  switch (vcs.getvoiceCallStatus()) 
-  {
-    case IDLE_CALL: // Nothing is happening
-      
-      break;
-      
-    case RECEIVINGCALL: // Yes! Someone is calling us
-      
-      Serial.println("RECEIVING CALL");
-      
-      // Retrieve the calling number
-      vcs.retrieveCallingNumber(numtel, 20);
-      
-      // Print the calling number
-      Serial.print("Number:");
-      Serial.println(numtel);
-      
-      // Answer the call, establish the call
-      vcs.answerCall();         
-      break;
-      
-    case TALKING:  // In this case the call would be established
-      
-      Serial.println("TALKING. Press enter to hang up.");
-      while(Serial.read()!='\n')
-        delay(100);
-      vcs.hangCall();
-      Serial.println("Hanging up and waiting for the next call.");      
-      break;
-  }
-  delay(1000);
-}
-
-
diff --git a/libraries/GSM/examples/SendSMS/SendSMS.ino b/libraries/GSM/examples/SendSMS/SendSMS.ino
deleted file mode 100644
index 677442a..0000000
--- a/libraries/GSM/examples/SendSMS/SendSMS.ino
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- SMS sender
- 
- This sketch, for the Arduino GSM shield,sends an SMS message 
- you enter in the serial monitor. Connect your Arduino with the 
- GSM shield and SIM card, open the serial monitor, and wait for 
- the "READY" message to appear in the monitor. Next, type a 
- message to send and press "return". Make sure the serial 
- monitor is set to send a newline when you press return.
- 
- Circuit:
- * GSM shield 
- * SIM card that can send SMS
- 
- created 25 Feb 2012
- by Tom Igoe
- 
- This example is in the public domain.
- 
- http://arduino.cc/en/Tutorial/GSMExamplesSendSMS
- 
- */
-
-// Include the GSM library
-#include <GSM.h>
-
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess;
-GSM_SMS sms;
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  Serial.println("SMS Messages Sender");
-
-  // connection state
-  boolean notConnected = true;
-
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  Serial.println("GSM initialized");
-}
-
-void loop()
-{
-
-  Serial.print("Enter a mobile number: ");
-  char remoteNum[20];  // telephone number to send sms
-  readSerial(remoteNum);
-  Serial.println(remoteNum);
-    
-  // sms text
-  Serial.print("Now, enter SMS content: ");
-  char txtMsg[200];
-  readSerial(txtMsg);
-  Serial.println("SENDING");
-  Serial.println();
-  Serial.println("Message:");
-  Serial.println(txtMsg);
-  
-  // send the message
-  sms.beginSMS(remoteNum);
-  sms.print(txtMsg);
-  sms.endSMS(); 
-  Serial.println("\nCOMPLETE!\n");
-}
-
-/*
-  Read input serial
- */
-int readSerial(char result[])
-{
-  int i = 0;
-  while(1)
-  {
-    while (Serial.available() > 0)
-    {
-      char inChar = Serial.read();
-      if (inChar == '\n')
-      {
-        result[i] = '\0';
-        Serial.flush();
-        return 0;
-      }
-      if(inChar!='\r')
-      {
-        result[i] = inChar;
-        i++;
-      }
-    }
-  }
-}
diff --git a/libraries/GSM/examples/Tools/BandManagement/BandManagement.ino b/libraries/GSM/examples/Tools/BandManagement/BandManagement.ino
deleted file mode 100644
index 84d8c71..0000000
--- a/libraries/GSM/examples/Tools/BandManagement/BandManagement.ino
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- Band Management
- 
- This sketch, for the Arduino GSM shield, checks the band
- currently configured in the modem and allows you to change 
- it.
- 
- Please check http://www.worldtimezone.com/gsm.html
- Usual configurations:
- Europe, Africa, Middle East: E-GSM(900)+DCS(1800)
- USA, Canada, South America: GSM(850)+PCS(1900)
- Mexico: PCS(1900)
- Brazil: GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900)
- 
- 
- Circuit:
- * GSM shield 
- 
- created 12 June 2012
- by Javier Zorzano, Scott Fitzgerald
- 
- This example is in the public domain.
- */
-
-// libraries
-#include <GSM.h>
-
-// initialize the library instance
-GSMBand band;
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // Beginning the band manager restarts the modem
-  Serial.println("Restarting modem...");
-  band.begin();
-  Serial.println("Modem restarted.");
-  
-};
-
-
-void loop()
-{
-  // Get current band 
-  String bandName = band.getBand(); // Get and print band name
-  Serial.print("Current band:");
-  Serial.println(bandName);
-  Serial.println("Want to change the band you’re on?");
-  String newBandName;
-  newBandName = askUser();
-  // Tell the user what we are about to do…
-  Serial.print("\nConfiguring band "); 
-  Serial.println(newBandName); 
-  // Change the band 
-  boolean operationSuccess; 
-  operationSuccess = band.setBand(newBandName); 
-  // Tell the user if the operation was OK 
-  if(operationSuccess)
-  { 
-    Serial.println("Success");
-  } 
-  else
-  { 
-    Serial.println("Error while changing band");
-  } 
-   
-  if(operationSuccess)
-  { 
-    while(true); 
-  } 
-}
-
-// This function offers the user different options
-// through the Serial interface
-// The user selects one
-String askUser()
-{
-  String newBand; 
-  Serial.println("Select band:"); 
-  // Print the different options 
-  Serial.println("1 : E-GSM(900)"); 
-  Serial.println("2 : DCS(1800)"); 
-  Serial.println("3 : PCS(1900)"); 
-  Serial.println("4 : E-GSM(900)+DCS(1800) ex: Europe"); 
-  Serial.println("5 : GSM(850)+PCS(1900) Ex: USA, South Am."); 
-  Serial.println("6 : GSM(850)+E-GSM(900)+DCS(1800)+PCS(1900)"); 
-  
-  // Empty the incoming buffer 
-  while(Serial.available()) 
-  Serial.read(); 
-  
-  // Wait for an answer, just look at the first character 
-  while(!Serial.available()); 
-  char c= Serial.read(); 
-  if(c=='1')
-    newBand=GSM_MODE_EGSM; 
-  else if(c=='2')
-    newBand=GSM_MODE_DCS; 
-  else if(c=='3')
-    newBand=GSM_MODE_PCS; 
-  else if(c=='4')
-    newBand=GSM_MODE_EGSM_DCS; 
-  else if(c=='5')
-    newBand=GSM_MODE_GSM850_PCS; 
-  else if(c=='6')
-    newBand=GSM_MODE_GSM850_EGSM_DCS_PCS; 
-  else
-    newBand="GSM_MODE_UNDEFINED";
-  return newBand;
-}
-
- 
-
-
-
diff --git a/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino b/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino
deleted file mode 100644
index 0e442eb..0000000
--- a/libraries/GSM/examples/Tools/GsmScanNetworks/GsmScanNetworks.ino
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- 
- GSM Scan Networks
- 
- This example prints out the IMEI number of the modem,
- then checks to see if it's connected to a carrier. If so, 
- it prints the phone number associated with the card.
- Then it scans for nearby networks and prints out their signal strengths.
- 
- Circuit:
- * GSM shield 
- * SIM card
- 
- Created 8 Mar 2012
- by Tom Igoe, implemented by Javier Carazo
- Modified 4 Feb 2013
- by Scott Fitzgerald
- 
- http://arduino.cc/en/Tutorial/GSMToolsGsmScanNetworks
- 
- This example code is part of the public domain
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess;     // include a 'true' parameter to enable debugging
-GSMScanner scannerNetworks;
-GSMModem modemTest;
-
-// Save data variables
-String IMEI = "";
-
-// serial monitor result messages
-String errortext = "ERROR";
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("GSM networks scanner");
-  scannerNetworks.begin();
-  
-  // connection state
-  boolean notConnected = true;
-  
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(notConnected)
-  {
-    if(gsmAccess.begin(PINNUMBER)==GSM_READY)
-      notConnected = false;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-  
-  // get modem parameters
-  // IMEI, modem unique identifier
-  Serial.print("Modem IMEI: ");
-  IMEI = modemTest.getIMEI();
-  IMEI.replace("\n","");
-  if(IMEI != NULL)
-    Serial.println(IMEI);
-}
-
-void loop()
-{
-  // scan for existing networks, displays a list of networks
-  Serial.println("Scanning available networks. May take some seconds.");
-  Serial.println(scannerNetworks.readNetworks());
-  
-    // currently connected carrier
-  Serial.print("Current carrier: ");
-  Serial.println(scannerNetworks.getCurrentCarrier());
-    
-  // returns strength and ber
-  // signal strength in 0-31 scale. 31 means power > 51dBm
-  // BER is the Bit Error Rate. 0-7 scale. 99=not detectable
-  Serial.print("Signal Strength: ");
-  Serial.print(scannerNetworks.getSignalStrength());
-  Serial.println(" [0-31]");
-
-}
-
diff --git a/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino b/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino
deleted file mode 100644
index 654d1b8..0000000
--- a/libraries/GSM/examples/Tools/PinManagement/PinManagement.ino
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- 
- This example enables you to change or remove the PIN number of 
- a SIM card inserted into a GSM shield.
- 
- Circuit:
- * GSM shield
- * SIM card
- 
- Created 12 Jun 2012
- by David del Peral
- 
- This example code is part of the public domain 
- 
- http://arduino.cc/en/Tutorial/GSMToolsPinManagement
- 
- */
-
-// libraries
-#include <GSM.h>
-
-// pin manager object
-GSMPIN PINManager;
-
-// save input in serial by user
-String user_input = "";
-
-// authenticated with PIN code
-boolean auth = false;
-
-// serial monitor result messages
-String oktext = "OK";
-String errortext = "ERROR";
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  Serial.println("Change PIN example\n");
-  PINManager.begin();
-  
-  // check if the SIM have pin lock
-  while(!auth){
-    int pin_query = PINManager.isPIN();
-    if(pin_query == 1)
-    {
-      // if SIM is locked, enter PIN code
-      Serial.print("Enter PIN code: ");
-      user_input = readSerial();
-      // check PIN code
-      if(PINManager.checkPIN(user_input) == 0)
-      {
-        auth = true;
-        PINManager.setPINUsed(true);
-        Serial.println(oktext);
-      }
-      else
-      {  
-        // if PIN code was incorrected
-        Serial.println("Incorrect PIN. Remember that you have 3 opportunities.");
-      }
-    }
-    else if(pin_query == -1)
-    {
-      // PIN code is locked, user must enter PUK code
-      Serial.println("PIN locked. Enter PUK code: ");
-      String puk = readSerial();
-      Serial.print("Now, enter a new PIN code: ");
-      user_input = readSerial();
-      // check PUK code
-      if(PINManager.checkPUK(puk, user_input) == 0)
-      {
-        auth = true;
-        PINManager.setPINUsed(true);
-        Serial.println(oktext);
-      }
-      else
-      {
-        // if PUK o the new PIN are incorrect
-        Serial.println("Incorrect PUK or invalid new PIN. Try again!.");
-      }
-    }
-    else if(pin_query == -2)
-    {
-      // the worst case, PIN and PUK are locked
-      Serial.println("PIN & PUK locked. Use PIN2/PUK2 in a mobile phone.");
-      while(true);
-    }
-    else
-    {
-      // SIM does not requires authetication 
-      Serial.println("No pin necessary.");
-      auth = true;
-    }
-  }
-  
-  // start GSM shield
-  Serial.print("Checking register in GSM network...");
-  if(PINManager.checkReg() == 0)
-    Serial.println(oktext);
-  // if you are connect by roaming
-  else if(PINManager.checkReg() == 1)
-    Serial.println("ROAMING " + oktext);  
-  else
-  {
-    // error connection
-    Serial.println(errortext);
-    while(true);
-  }
-}
-
-void loop()
-{
-  // Function loop implements pin management user menu
-  // Only if you SIM use pin lock, you can change PIN code
-  // user_op variables save user option
-  
-  Serial.println("Choose an option:\n1 - On/Off PIN.");
-  if(PINManager.getPINUsed())
-    Serial.println("2 - Change PIN.");
-  String user_op = readSerial();
-  if(user_op == "1")
-  {
-    Serial.println("Enter your PIN code:");
-    user_input = readSerial();
-    // activate/deactivate PIN lock
-    PINManager.switchPIN(user_input);
-  }
-  else if(user_op == "2" & PINManager.getPINUsed())
-  {
-    Serial.println("Enter your actual PIN code:");
-    String oldPIN = readSerial();
-    Serial.println("Now, enter your new PIN code:");
-    String newPIN = readSerial();
-    // change PIN
-    PINManager.changePIN(oldPIN, newPIN);
-  }
-  else
-  {
-    Serial.println("Incorrect option. Try again!.");
-  }
-  delay(1000);
-}
-
-/*
-  Read input serial
- */
-String readSerial()
-{
-  String text = "";
-  while(1)
-  {
-    while (Serial.available() > 0)
-    {
-      char inChar = Serial.read();
-      if (inChar == '\n')
-      {
-        return text;
-      }
-      if(inChar!='\r')
-        text += inChar;
-    }
-  }
-}
diff --git a/libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino b/libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino
deleted file mode 100644
index ab4a2be..0000000
--- a/libraries/GSM/examples/Tools/TestGPRS/TestGPRS.ino
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- 
- This sketch test the GSM shield's ability to connect to a
- GPERS network. It asks for APN information through the 
- serial monitor and tries to connect to arduino.cc.
- 
- Circuit:
- * GSM shield attached
- * SIM card with data plan
- 
- Created 18 Jun 2012
- by David del Peral
- 
- This example code is part of the public domain
- 
- http://arduino.cc/en/Tutorial/GSMToolsTestGPRS
- 
- */
-
-// libraries
-#include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// initialize the library instance
-GSM gsmAccess;        // GSM access: include a 'true' parameter for debug enabled
-GPRS gprsAccess;  // GPRS access
-GSMClient client;  // Client service for TCP connection
-
-// messages for serial monitor response
-String oktext = "OK";
-String errortext = "ERROR";
-
-// URL and path (for example: arduino.cc)
-char url[] = "arduino.cc";
-char urlproxy[] = "http://arduino.cc";
-char path[] = "/";
-
-// variable for save response obtained
-String response = "";
-
-// use a proxy
-boolean use_proxy = false;
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-}
-
-void loop()
-{
-  use_proxy = false;
-  
-  // start GSM shield
-  // if your SIM has PIN, pass it as a parameter of begin() in quotes
-  Serial.print("Connecting GSM network...");
-  if(gsmAccess.begin(PINNUMBER)!=GSM_READY)
-  {
-    Serial.println(errortext);
-    while(true);
-  }
-  Serial.println(oktext);
-  
-  // read APN introduced by user
-  char apn[50];
-  Serial.print("Enter your APN: ");
-  readSerial(apn);
-  Serial.println(apn);
-  
-  // Read APN login introduced by user
-  char login[50];
-  Serial.print("Now, enter your login: ");
-  readSerial(login);
-  Serial.println(login);
-  
-  // read APN password introduced by user
-  char password[20];
-  Serial.print("Finally, enter your password: ");
-  readSerial(password);
-  
-  // attach GPRS
-  Serial.println("Attaching to GPRS with your APN...");
-  if(gprsAccess.attachGPRS(apn, login, password)!=GPRS_READY)
-  {
-    Serial.println(errortext);
-  }
-  else{
-      
-    Serial.println(oktext);
-    
-    // read proxy introduced by user
-    char proxy[100];
-    Serial.print("If your carrier uses a proxy, enter it, if not press enter: ");
-    readSerial(proxy);
-    Serial.println(proxy);
-    
-    // if user introduced a proxy, asks him for proxy port
-    int pport;
-    if(proxy[0] != '\0'){
-      // read proxy port introduced by user
-      char proxyport[10];
-      Serial.print("Enter the proxy port: ");
-      readSerial(proxyport);
-      // cast proxy port introduced to integer
-      pport = (int) proxyport;
-      use_proxy = true;
-      Serial.println(proxyport);
-    }
-    
-    // connection with arduino.cc and realize HTTP request
-    Serial.print("Connecting and sending GET request to arduino.cc...");
-    int res_connect;
-    
-    // if use a proxy, connect with it
-    if(use_proxy)
-      res_connect = client.connect(proxy, pport);
-    else
-      res_connect = client.connect(url, 80);
-    
-    if (res_connect)
-    {
-      // make a HTTP 1.0 GET request (client sends the request)
-      client.print("GET ");
-      
-      // if use a proxy, the path is arduino.cc URL
-      if(use_proxy)
-        client.print(urlproxy);
-      else
-        client.print(path);
-        
-      client.println(" HTTP/1.0");
-      client.println();
-      Serial.println(oktext);
-    } 
-    else
-    {
-      // if you didn't get a connection to the server
-      Serial.println(errortext);
-    }
-    Serial.print("Receiving response...");
-    
-    boolean test = true;
-    while(test)
-    {
-      // if there are incoming bytes available 
-      // from the server, read and check them
-      if (client.available())
-      {
-        char c = client.read();
-        response += c;
-        
-        // cast response obtained from string to char array
-        char responsechar[response.length()+1];
-        response.toCharArray(responsechar, response.length()+1);
-        
-        // if response includes a "200 OK" substring
-        if(strstr(responsechar, "200 OK") != NULL){
-          Serial.println(oktext);
-          Serial.println("TEST COMPLETE!");
-          test = false;
-        }
-      }
-      
-      // if the server's disconnected, stop the client:
-      if (!client.connected())
-      {
-        Serial.println();
-        Serial.println("disconnecting.");
-        client.stop();
-        test = false;
-      }
-    }
-  }
-}
-
-/*
-  Read input serial
- */
-int readSerial(char result[])
-{
-  int i = 0;
-  while(1)
-  {
-    while (Serial.available() > 0)
-    {
-      char inChar = Serial.read();
-      if (inChar == '\n')
-      {
-        result[i] = '\0';
-        return 0;
-      }
-      if(inChar!='\r')
-      {
-        result[i] = inChar;
-        i++;
-      }
-    }
-  }
-}
diff --git a/libraries/GSM/examples/Tools/TestModem/TestModem.ino b/libraries/GSM/examples/Tools/TestModem/TestModem.ino
deleted file mode 100644
index de61fff..0000000
--- a/libraries/GSM/examples/Tools/TestModem/TestModem.ino
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- 
- This example tests to see if the modem of the 
- GSM shield is working correctly. You do not need 
- a SIM card for this example.
- 
- Circuit:
- * GSM shield attached 
- 
- Created 12 Jun 2012
- by David del Peral
- modified 21 Nov 2012
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/GSMToolsTestModem
- 
- This sample code is part of the public domain
- 
- */
-
-// libraries
-#include <GSM.h>
-
-// modem verification object
-GSMModem modem;
-
-// IMEI variable
-String IMEI = "";
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-  
-  // start modem test (reset and check response)
-  Serial.print("Starting modem test...");
-  if(modem.begin()) 
-    Serial.println("modem.begin() succeeded");
-  else
-    Serial.println("ERROR, no modem answer.");
-}
-
-void loop()
-{
-  // get modem IMEI
-  Serial.print("Checking IMEI...");
-  IMEI = modem.getIMEI();
-  
-  // check IMEI response
-  if(IMEI != NULL)
-  {
-    // show IMEI in serial monitor
-    Serial.println("Modem's IMEI: " + IMEI);
-    // reset modem to check booting:
-    Serial.print("Resetting modem...");
-    modem.begin();
-    // get and check IMEI one more time
-    if(modem.getIMEI() != NULL)
-    {
-      Serial.println("Modem is functoning properly");
-    }
-    else
-    {
-      Serial.println("Error: getIMEI() failed after modem.begin()");
-    }
-  }
-  else
-  {
-    Serial.println("Error: Could not get IMEI");
-  }
-  // do nothing:
-  while(true);
-}
-
diff --git a/libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino b/libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino
deleted file mode 100644
index 5cc3f8a..0000000
--- a/libraries/GSM/examples/Tools/TestWebServer/TestWebServer.ino
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-  Basic Web Server
- 
- A simple web server that replies with nothing, but prints the client's request
- and the server IP address.
-
- Circuit:
- * GSM shield attached
- 
- created 
- by David Cuartielles
- modified 21 Nov 2012
- by Tom Igoe
- 
- http://arduino.cc/en/Tutorial/GSMToolsTestWebServer
- 
- This example code is part of the public domain
- */
- #include <GSM.h>
-
-// PIN Number
-#define PINNUMBER ""
-
-// APN data
-#define GPRS_APN       "GPRS_APN" // replace your GPRS APN
-#define GPRS_LOGIN     "login"    // replace with your GPRS login
-#define GPRS_PASSWORD  "password" // replace with your GPRS password
-
-
-// initialize the library instance
-GPRS gprs;
-GSM gsmAccess;     // include a 'true' parameter for debug enabled
-GSMServer server(80); // port 80 (http default)
-
-// timeout
-const unsigned long __TIMEOUT__ = 10*1000;
-
-void setup()
-{
-  // initialize serial communications and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
-  }
-
-  Serial.println("starting,..");
-  // connection state
-  boolean connected = true;
-
-  // Start GSM shield
-  // If your SIM has PIN, pass it as a parameter of begin() in quotes
-  while(!connected)
-  {
-    if((gsmAccess.begin(PINNUMBER)==GSM_READY) &
-        (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD)==GPRS_READY))
-      connected = true;
-    else
-    {
-      Serial.println("Not connected");
-      delay(1000);
-    }
-  }
-
-  Serial.println("Connected to GPRS network");
-
-  // start server
-  server.begin();
-
-  //Get IP.
-  IPAddress LocalIP = gprs.getIPAddress();
-  Serial.println("Server IP address=");
-  Serial.println(LocalIP);
-}
-
-void loop(){
-  GSMClient client = server.available();
-  
- if (client) {
-   if (client.available()) {
-    Serial.write(client.read()); 
-   }
-}
-
-}
-