Moving all AVR specific libraries to hardware/avr

1 files changed, 436 insertions, 0 deletions

diff --git a/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde b/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde
new file mode 100644
index 0000000..4cfa658
--- /dev/null
+++ b/libraries/Firmata/examples/StandardFirmata_2_2_forUNO_0_3/StandardFirmata_2_2_forUNO_0_3.pde
@@ -0,0 +1,436 @@
+/*
+  This introduces modifications on the normal Firmata made for Arduino so that the LED 
+  blinks until receiving the first command over serial.
+
+  Copyright (C) 2010 David Cuartielles.  All rights reserved.
+  
+  based at 99.9% on Firmata by HC Steiner according to the following license terms:
+  
+  Copyright (C) 2006-2008 Hans-Christoph Steiner.  All rights reserved.
+  
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+ 
+  See file LICENSE.txt for further informations on licensing terms.
+
+  formatted using the GNU C formatting and indenting
+*/
+
+/* 
+ * TODO: use Program Control to load stored profiles from EEPROM
+ */
+
+#include <Servo.h>
+#include <Firmata.h>
+
+/*==============================================================================
+ * GLOBAL VARIABLES
+ *============================================================================*/
+
+/* has the command arrived? */
+boolean firstCommand = false;
+int dataOnSerial = 0;
+boolean statusLed = false;
+
+/* analog inputs */
+int analogInputsToReport = 0; // bitwise array to store pin reporting
+
+/* digital input ports */
+byte reportPINs[TOTAL_PORTS];       // 1 = report this port, 0 = silence
+byte previousPINs[TOTAL_PORTS];     // previous 8 bits sent
+
+/* pins configuration */
+byte pinConfig[TOTAL_PINS];         // configuration of every pin
+byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else
+int pinState[TOTAL_PINS];           // any value that has been written
+
+/* timer variables */
+unsigned long currentMillis;        // store the current value from millis()
+unsigned long previousMillis;       // for comparison with currentMillis
+int samplingInterval = 19;          // how often to run the main loop (in ms)
+unsigned long toggleMillis;
+
+Servo servos[MAX_SERVOS];
+
+/*==============================================================================
+ * FUNCTIONS
+ *============================================================================*/
+
+void toggleLed() 
+{
+  if (millis() - toggleMillis > 500) {
+    statusLed = !statusLed;
+    digitalWrite(13, statusLed);
+    toggleMillis = millis();
+  }
+}
+
+void outputPort(byte portNumber, byte portValue, byte forceSend)
+{
+  // pins not configured as INPUT are cleared to zeros
+  portValue = portValue & portConfigInputs[portNumber];
+  // only send if the value is different than previously sent
+  if(forceSend || previousPINs[portNumber] != portValue) {
+    Firmata.sendDigitalPort(portNumber, portValue);
+    previousPINs[portNumber] = portValue;
+  }
+}
+
+/* -----------------------------------------------------------------------------
+ * check all the active digital inputs for change of state, then add any events
+ * to the Serial output queue using Serial.print() */
+void checkDigitalInputs(void)
+{
+  /* Using non-looping code allows constants to be given to readPort().
+   * The compiler will apply substantial optimizations if the inputs
+   * to readPort() are compile-time constants. */
+  if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false);
+  if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false);
+  if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false);
+  if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false);
+  if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false);
+  if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false);
+  if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false);
+  if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false);
+  if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false);
+  if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false);
+  if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false);
+  if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false);
+  if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false);
+  if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false);
+  if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false);
+  if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false);
+}
+
+// -----------------------------------------------------------------------------
+/* sets the pin mode to the correct state and sets the relevant bits in the
+ * two bit-arrays that track Digital I/O and PWM status
+ */
+void setPinModeCallback(byte pin, int mode)
+{
+  if (IS_PIN_SERVO(pin) && mode != SERVO && servos[PIN_TO_SERVO(pin)].attached()) {
+    servos[PIN_TO_SERVO(pin)].detach();
+  }
+  if (IS_PIN_ANALOG(pin)) {
+    reportAnalogCallback(PIN_TO_ANALOG(pin), mode == ANALOG ? 1 : 0); // turn on/off reporting
+  }
+  if (IS_PIN_DIGITAL(pin)) {
+    if (mode == INPUT) {
+      portConfigInputs[pin/8] |= (1 << (pin & 7));
+    } else {
+      portConfigInputs[pin/8] &= ~(1 << (pin & 7));
+    }
+  }
+  pinState[pin] = 0;
+  switch(mode) {
+  case ANALOG:
+    if (IS_PIN_ANALOG(pin)) {
+      if (IS_PIN_DIGITAL(pin)) {
+        pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver
+        digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups
+      }
+      pinConfig[pin] = ANALOG;
+    }
+    break;
+  case INPUT:
+    if (IS_PIN_DIGITAL(pin)) {
+      pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver
+      digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups
+      pinConfig[pin] = INPUT;
+    }
+    break;
+  case OUTPUT:
+    if (IS_PIN_DIGITAL(pin)) {
+      digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable PWM
+      pinMode(PIN_TO_DIGITAL(pin), OUTPUT);
+      pinConfig[pin] = OUTPUT;
+    }
+    break;
+  case PWM:
+    if (IS_PIN_PWM(pin)) {
+      pinMode(PIN_TO_PWM(pin), OUTPUT);
+      analogWrite(PIN_TO_PWM(pin), 0);
+      pinConfig[pin] = PWM;
+    }
+    break;
+  case SERVO:
+    if (IS_PIN_SERVO(pin)) {
+      pinConfig[pin] = SERVO;
+      if (!servos[PIN_TO_SERVO(pin)].attached()) {
+          servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin));
+      } else {
+        Firmata.sendString("Servo only on pins from 2 to 13");
+      }
+    }
+    break;
+  case I2C:
+    pinConfig[pin] = mode;
+    Firmata.sendString("I2C mode not yet supported");
+    break;
+  default:
+    Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM
+  }
+  // TODO: save status to EEPROM here, if changed
+}
+
+void analogWriteCallback(byte pin, int value)
+{
+  if (pin < TOTAL_PINS) {
+    switch(pinConfig[pin]) {
+    case SERVO:
+      if (IS_PIN_SERVO(pin))
+        servos[PIN_TO_SERVO(pin)].write(value);
+        pinState[pin] = value;
+      break;
+    case PWM:
+      if (IS_PIN_PWM(pin))
+        analogWrite(PIN_TO_PWM(pin), value);
+        pinState[pin] = value;
+      break;
+    }
+  }
+}
+
+void digitalWriteCallback(byte port, int value)
+{
+  byte pin, lastPin, mask=1, pinWriteMask=0;
+
+  if (port < TOTAL_PORTS) {
+    // create a mask of the pins on this port that are writable.
+    lastPin = port*8+8;
+    if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS;
+    for (pin=port*8; pin < lastPin; pin++) {
+      // do not disturb non-digital pins (eg, Rx & Tx)
+      if (IS_PIN_DIGITAL(pin)) {
+        // only write to OUTPUT and INPUT (enables pullup)
+        // do not touch pins in PWM, ANALOG, SERVO or other modes
+        if (pinConfig[pin] == OUTPUT || pinConfig[pin] == INPUT) {
+          pinWriteMask |= mask;
+          pinState[pin] = ((byte)value & mask) ? 1 : 0;
+        }
+      }
+      mask = mask << 1;
+    }
+    writePort(port, (byte)value, pinWriteMask);
+  }
+}
+
+
+// -----------------------------------------------------------------------------
+/* sets bits in a bit array (int) to toggle the reporting of the analogIns
+ */
+//void FirmataClass::setAnalogPinReporting(byte pin, byte state) {
+//}
+void reportAnalogCallback(byte analogPin, int value)
+{
+  if (analogPin < TOTAL_ANALOG_PINS) {
+    if(value == 0) {
+      analogInputsToReport = analogInputsToReport &~ (1 << analogPin);
+    } else {
+      analogInputsToReport = analogInputsToReport | (1 << analogPin);
+    }
+  }
+  // TODO: save status to EEPROM here, if changed
+}
+
+void reportDigitalCallback(byte port, int value)
+{
+  if (port < TOTAL_PORTS) {
+    reportPINs[port] = (byte)value;
+  }
+  // do not disable analog reporting on these 8 pins, to allow some
+  // pins used for digital, others analog.  Instead, allow both types
+  // of reporting to be enabled, but check if the pin is configured
+  // as analog when sampling the analog inputs.  Likewise, while
+  // scanning digital pins, portConfigInputs will mask off values from any
+  // pins configured as analog
+}
+
+/*==============================================================================
+ * SYSEX-BASED commands
+ *============================================================================*/
+
+void sysexCallback(byte command, byte argc, byte *argv)
+{
+  switch(command) {
+  case SERVO_CONFIG:
+    if(argc > 4) {
+      // these vars are here for clarity, they'll optimized away by the compiler
+      byte pin = argv[0];
+      int minPulse = argv[1] + (argv[2] << 7);
+      int maxPulse = argv[3] + (argv[4] << 7);
+
+      if (IS_PIN_SERVO(pin)) {
+        // servos are pins from 2 to 13, so offset for array
+        if (servos[PIN_TO_SERVO(pin)].attached())
+          servos[PIN_TO_SERVO(pin)].detach();
+        servos[PIN_TO_SERVO(pin)].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse);
+        setPinModeCallback(pin, SERVO);
+      }
+    }
+    break;
+  case SAMPLING_INTERVAL:
+    if (argc > 1)
+      samplingInterval = argv[0] + (argv[1] << 7);
+    else
+      Firmata.sendString("Not enough data");
+    break;
+  case EXTENDED_ANALOG:
+    if (argc > 1) {
+      int val = argv[1];
+      if (argc > 2) val |= (argv[2] << 7);
+      if (argc > 3) val |= (argv[3] << 14);
+      analogWriteCallback(argv[0], val);
+    }
+    break;
+  case CAPABILITY_QUERY:
+    Serial.write(START_SYSEX);
+    Serial.write(CAPABILITY_RESPONSE);
+    for (byte pin=0; pin < TOTAL_PINS; pin++) {
+      if (IS_PIN_DIGITAL(pin)) {
+        Serial.write((byte)INPUT);
+        Serial.write(1);
+        Serial.write((byte)OUTPUT);
+        Serial.write(1);
+      }
+      if (IS_PIN_ANALOG(pin)) {
+        Serial.write(ANALOG);
+        Serial.write(10);
+      }
+      if (IS_PIN_PWM(pin)) {
+        Serial.write(PWM);
+        Serial.write(8);
+      }
+      if (IS_PIN_SERVO(pin)) {
+        Serial.write(SERVO);
+        Serial.write(14);
+      }
+      Serial.write(127);
+    }
+    Serial.write(END_SYSEX);
+    break;
+  case PIN_STATE_QUERY:
+    if (argc > 0) {
+      byte pin=argv[0];
+      Serial.write(START_SYSEX);
+      Serial.write(PIN_STATE_RESPONSE);
+      Serial.write(pin);
+      if (pin < TOTAL_PINS) {
+        Serial.write((byte)pinConfig[pin]);
+	Serial.write((byte)pinState[pin] & 0x7F);
+	if (pinState[pin] & 0xFF80) Serial.write((byte)(pinState[pin] >> 7) & 0x7F);
+	if (pinState[pin] & 0xC000) Serial.write((byte)(pinState[pin] >> 14) & 0x7F);
+      }
+      Serial.write(END_SYSEX);
+    }
+    break;
+  case ANALOG_MAPPING_QUERY:
+    Serial.write(START_SYSEX);
+    Serial.write(ANALOG_MAPPING_RESPONSE);
+    for (byte pin=0; pin < TOTAL_PINS; pin++) {
+      Serial.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127);
+    }
+    Serial.write(END_SYSEX);
+    break;
+  }
+}
+
+/*==============================================================================
+ * SETUP()
+ *============================================================================*/
+void setup() 
+{
+  byte i;
+
+  Firmata.setFirmwareVersion(2, 2);
+
+  Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
+  Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback);
+  Firmata.attach(REPORT_ANALOG, reportAnalogCallback);
+  Firmata.attach(REPORT_DIGITAL, reportDigitalCallback);
+  Firmata.attach(SET_PIN_MODE, setPinModeCallback);
+  Firmata.attach(START_SYSEX, sysexCallback);
+
+  // TODO: load state from EEPROM here
+
+  /* these are initialized to zero by the compiler startup code
+  for (i=0; i < TOTAL_PORTS; i++) {
+    reportPINs[i] = false;
+    portConfigInputs[i] = 0;
+    previousPINs[i] = 0;
+  }
+  */
+  for (i=0; i < TOTAL_PINS; i++) {
+    if (IS_PIN_ANALOG(i)) {
+      // turns off pullup, configures everything
+      setPinModeCallback(i, ANALOG);
+    } else {
+      // sets the output to 0, configures portConfigInputs
+      setPinModeCallback(i, OUTPUT);
+    }
+  }
+  // by defult, do not report any analog inputs
+  analogInputsToReport = 0;
+
+  Firmata.begin(57600);
+
+  /* send digital inputs to set the initial state on the host computer,
+   * since once in the loop(), this firmware will only send on change */
+  for (i=0; i < TOTAL_PORTS; i++) {
+    outputPort(i, readPort(i, portConfigInputs[i]), true);
+  }
+  
+  /* init the toggleLed counter */
+  toggleMillis = millis();
+  pinMode(13, OUTPUT);
+}
+
+/*==============================================================================
+ * LOOP()
+ *============================================================================*/
+void loop() 
+{
+  byte pin, analogPin;
+
+  /* DIGITALREAD - as fast as possible, check for changes and output them to the
+   * FTDI buffer using Serial.print()  */
+  checkDigitalInputs();  
+
+  //XXX: hack Firmata to blink until serial command arrives 
+  dataOnSerial = Firmata.available();
+  if (dataOnSerial > 0 && !firstCommand) {
+    firstCommand = true;
+  }
+  //XXX: do the blink if the first command hasn't arrived yet
+  //     configures pin 13 as output and then back as input
+  if (!firstCommand) {
+    toggleLed();
+  }
+  
+  /* SERIALREAD - processing incoming messagse as soon as possible, while still
+   * checking digital inputs.  */
+  while(dataOnSerial) {
+    Firmata.processInput();
+    dataOnSerial = Firmata.available();
+  }
+  
+  /* SEND FTDI WRITE BUFFER - make sure that the FTDI buffer doesn't go over
+   * 60 bytes. use a timer to sending an event character every 4 ms to
+   * trigger the buffer to dump. */
+
+  currentMillis = millis();
+  if (currentMillis - previousMillis > samplingInterval) {
+    previousMillis += samplingInterval;
+    /* ANALOGREAD - do all analogReads() at the configured sampling interval */
+    for(pin=0; pin<TOTAL_PINS; pin++) {
+      if (IS_PIN_ANALOG(pin) && pinConfig[pin] == ANALOG) {
+        analogPin = PIN_TO_ANALOG(pin);
+        if (analogInputsToReport & (1 << analogPin)) {
+          Firmata.sendAnalog(analogPin, analogRead(analogPin));
+        }
+      }
+    }
+  }
+}