Merged master

1 files changed, 51 insertions, 32 deletions

diff --git a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
index a169443..dfd2d40 100644
--- a/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
+++ b/libraries/Ethernet/examples/PachubeClient/PachubeClient.ino
@@ -6,15 +6,20 @@
  the Adafruit Ethernet shield, either one will work, as long as it's got
  a Wiznet Ethernet module on board.
  
+ This example has been updated to use version 2.0 of the Pachube.com API. 
+ To make it work, create a feed with a datastream, and give it the ID
+ sensor1. Or change the code below to match your feed.
+ 
+ 
  Circuit:
  * Analog sensor attached to analog in 0
  * Ethernet shield attached to pins 10, 11, 12, 13
  
  created 15 March 2010
- updated 26 Oct 2011
- by Tom Igoe
+ modified 9 Apr 2012
+ by Tom Igoe with input from Usman Haque and Joe Saavedra
  
- http://www.tigoe.net/pcomp/code/category/arduinowiring/873
+http://arduino.cc/en/Tutorial/PachubeClient
  This code is in the public domain.
  
  */
@@ -22,6 +27,10 @@
 #include <SPI.h>
 #include <Ethernet.h>
 
+#define APIKEY         "YOUR API KEY GOES HERE" // replace your pachube api key here
+#define FEEDID         00000 // replace your feed ID
+#define USERAGENT      "My Project" // user agent is the project name
+
 // assign a MAC address for the ethernet controller.
 // Newer Ethernet shields have a MAC address printed on a sticker on the shield
 // fill in your address here:
@@ -34,26 +43,27 @@ IPAddress ip(10,0,1,20);
 // initialize the library instance:
 EthernetClient client;
 
-long lastConnectionTime = 0;        // last time you connected to the server, in milliseconds
-boolean lastConnected = false;      // state of the connection last time through the main loop
-const int postingInterval = 10000;  //delay between updates to Pachube.com
+// if you don't want to use DNS (and reduce your sketch size)
+// use the numeric IP instead of the name for the server:
+IPAddress server(216,52,233,122);      // numeric IP for api.pachube.com
+//char server[] = "api.pachube.com";   // name address for pachube API
+
+unsigned long lastConnectionTime = 0;          // last time you connected to the server, in milliseconds
+boolean lastConnected = false;                 // state of the connection last time through the main loop
+const unsigned long postingInterval = 10*1000; //delay between updates to Pachube.com
 
 void setup() {
-  // start serial port:
+ // Open serial communications and wait for port to open:
   Serial.begin(9600);
-  // start the Ethernet connection:
-  if (Ethernet.begin(mac) == 0) {
-    Serial.println("Failed to configure Ethernet using DHCP");
-    // no point in carrying on, so do nothing forevermore:
-    for(;;)
-      ;
+   while (!Serial) {
+    ; // wait for serial port to connect. Needed for Leonardo only
   }
-  // give the ethernet module time to boot up:
-  delay(1000);
-  // start the Ethernet connection:
+
+
+ // start the Ethernet connection:
   if (Ethernet.begin(mac) == 0) {
     Serial.println("Failed to configure Ethernet using DHCP");
-    // Configure manually:
+    // DHCP failed, so use a fixed IP address:
     Ethernet.begin(mac, ip);
   }
 }
@@ -91,34 +101,43 @@ void loop() {
 // this method makes a HTTP connection to the server:
 void sendData(int thisData) {
   // if there's a successful connection:
-  if (client.connect("www.pachube.com", 80)) {
+  if (client.connect(server, 80)) {
     Serial.println("connecting...");
-    // send the HTTP PUT request. 
-    // fill in your feed address here:
-    client.print("PUT /api/YOUR_FEED_HERE.csv HTTP/1.1\n");
-    client.print("Host: www.pachube.com\n");
-    // fill in your Pachube API key here:
-    client.print("X-PachubeApiKey: YOUR_KEY_HERE\n");
+    // send the HTTP PUT request:
+    client.print("PUT /v2/feeds/");
+    client.print(FEEDID);
+    client.println(".csv HTTP/1.1");
+    client.println("Host: api.pachube.com");
+    client.print("X-PachubeApiKey: ");
+    client.println(APIKEY);
+    client.print("User-Agent: ");
+    client.println(USERAGENT);
     client.print("Content-Length: ");
 
     // calculate the length of the sensor reading in bytes:
-    int thisLength = getLength(thisData);
-    client.println(thisLength, DEC);
+    // 8 bytes for "sensor1," + number of digits of the data:
+    int thisLength = 8 + getLength(thisData);
+    client.println(thisLength);
 
     // last pieces of the HTTP PUT request:
-    client.print("Content-Type: text/csv\n");
-    client.println("Connection: close\n");
+    client.println("Content-Type: text/csv");
+    client.println("Connection: close");
+    client.println();
 
     // here's the actual content of the PUT request:
-    client.println(thisData, DEC);
-
-    // note the time that the connection was made:
-    lastConnectionTime = millis();
+    client.print("sensor1,");
+    client.println(thisData);
+  
   } 
   else {
     // if you couldn't make a connection:
     Serial.println("connection failed");
+    Serial.println();
+    Serial.println("disconnecting.");
+    client.stop();
   }
+   // note the time that the connection was made or attempted:
+  lastConnectionTime = millis();
 }