Examples: mass code format. See example_formatter.conf

1 files changed, 29 insertions, 27 deletions

diff --git a/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino b/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino
index 6620999..bbebc48 100644
--- a/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino
+++ b/libraries/EEPROM/examples/eeprom_get/eeprom_get.ino
@@ -1,66 +1,68 @@
 /***
     eeprom_get example.
- 
+
     This shows how to use the EEPROM.get() method.
-    
+
     To pre-set the EEPROM data, run the example sketch eeprom_put.
-    This sketch will run without it, however, the values shown 
+    This sketch will run without it, however, the values shown
     will be shown from what ever is already on the EEPROM.
-    
+
     This may cause the serial object to print out a large string
     of garbage if there is no null character inside one of the strings
     loaded.
-    
+
     Written by Christopher Andrews 2015
-    Released under MIT licence.      
+    Released under MIT licence.
 ***/
 
 #include <EEPROM.h>
 
-void setup(){
-  
+void setup() {
+
   float f = 0.00f;   //Variable to store data read from EEPROM.
   int eeAddress = 0; //EEPROM address to start reading from
-  
-  Serial.begin( 9600 );
+
+  Serial.begin(9600);
   while (!Serial) {
     ; // wait for serial port to connect. Needed for Leonardo only
   }
-  Serial.print( "Read float from EEPROM: " );
+  Serial.print("Read float from EEPROM: ");
 
   //Get the float data from the EEPROM at position 'eeAddress'
-  EEPROM.get( eeAddress, f );
-  Serial.println( f, 3 );  //This may print 'ovf, nan' if the data inside the EEPROM is not a valid float.
-  
+  EEPROM.get(eeAddress, f);
+  Serial.println(f, 3);    //This may print 'ovf, nan' if the data inside the EEPROM is not a valid float.
+
   /***
     As get also returns a reference to 'f', you can use it inline.
     E.g: Serial.print( EEPROM.get( eeAddress, f ) );
   ***/
-  
-  /*** 
-    Get can be used with custom structures too. 
+
+  /***
+    Get can be used with custom structures too.
     I have separated this into an extra function.
   ***/
-  
+
   secondTest(); //Run the next test.
 }
 
-struct MyObject{
+struct MyObject {
   float field1;
   byte field2;
   char name[10];
 };
 
-void secondTest(){
+void secondTest() {
   int eeAddress = sizeof(float); //Move address to the next byte after float 'f'.
 
   MyObject customVar; //Variable to store custom object read from EEPROM.
-  EEPROM.get( eeAddress, customVar );
-  
-  Serial.println( "Read custom object from EEPROM: " );
-  Serial.println( customVar.field1 );
-  Serial.println( customVar.field2 );
-  Serial.println( customVar.name );
+  EEPROM.get(eeAddress, customVar);
+
+  Serial.println("Read custom object from EEPROM: ");
+  Serial.println(customVar.field1);
+  Serial.println(customVar.field2);
+  Serial.println(customVar.name);
 }
 
-void loop(){ /* Empty loop */ }
\ No newline at end of file
+void loop() {
+  /* Empty loop */
+}
\ No newline at end of file