Delete 'firmwares' folder

2 files changed, 0 insertions, 2119 deletions

diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.c b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.c
deleted file mode 100644
index 2eee15c..0000000
--- a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.c
+++ /dev/null
@@ -1,1117 +0,0 @@
-/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief FLASHC driver for AVR32 UC3.
- *
- * AVR32 Flash Controller driver module.
- *
- * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
- * - Supported devices:  All AVR32 devices with a FLASHC module can be used.
- * - AppNote:
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#include <avr32/io.h>
-#include <stddef.h>
-#include "compiler.h"
-#include "flashc.h"
-
-
-/*! \name FLASHC Writable Bit-Field Registers
- */
-//! @{
-
-typedef union
-{
-  unsigned long                 fcr;
-  avr32_flashc_fcr_t            FCR;
-} u_avr32_flashc_fcr_t;
-
-typedef union
-{
-  unsigned long                 fcmd;
-  avr32_flashc_fcmd_t           FCMD;
-} u_avr32_flashc_fcmd_t;
-
-//! @}
-
-
-/*! \name Flash Properties
- */
-//! @{
-
-
-unsigned int flashc_get_flash_size(void)
-{
-#if (defined AVR32_FLASHC_300_H_INCLUDED)
-  static const unsigned int FLASH_SIZE[1 << AVR32_FLASHC_PR_FSZ_SIZE] =
-  {
-      32 << 10,
-      64 << 10,
-     128 << 10,
-     256 << 10,
-     384 << 10,
-     512 << 10,
-     768 << 10,
-    1024 << 10
-  };
-  return FLASH_SIZE[(AVR32_FLASHC.pr & AVR32_FLASHC_PR_FSZ_MASK) >> AVR32_FLASHC_PR_FSZ_OFFSET];
-#else 
-  static const unsigned int FLASH_SIZE[1 << AVR32_FLASHC_FSR_FSZ_SIZE] =
-  {
-      32 << 10,
-      64 << 10,
-     128 << 10,
-     256 << 10,
-     384 << 10,
-     512 << 10,
-     768 << 10,
-    1024 << 10
-  };
-  return FLASH_SIZE[(AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_FSZ_MASK) >> AVR32_FLASHC_FSR_FSZ_OFFSET];
-#endif  
-}
-
-
-unsigned int flashc_get_page_count(void)
-{
-  return flashc_get_flash_size() / AVR32_FLASHC_PAGE_SIZE;
-}
-
-
-unsigned int flashc_get_page_count_per_region(void)
-{
-  return flashc_get_page_count() / AVR32_FLASHC_REGIONS;
-}
-
-
-unsigned int flashc_get_page_region(int page_number)
-{
-  return ((page_number >= 0) ? page_number : flashc_get_page_number()) / flashc_get_page_count_per_region();
-}
-
-
-unsigned int flashc_get_region_first_page_number(unsigned int region)
-{
-  return region * flashc_get_page_count_per_region();
-}
-
-
-//! @}
-
-
-/*! \name FLASHC Control
- */
-//! @{
-
-
-unsigned int flashc_get_wait_state(void)
-{
-  return (AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_FWS_MASK) >> AVR32_FLASHC_FCR_FWS_OFFSET;
-}
-
-
-void flashc_set_wait_state(unsigned int wait_state)
-{
-  u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr};
-  u_avr32_flashc_fcr.FCR.fws = wait_state;
-  AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr;
-}
-
-
-Bool flashc_is_ready_int_enabled(void)
-{
-  return ((AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_FRDY_MASK) != 0);
-}
-
-
-void flashc_enable_ready_int(Bool enable)
-{
-  u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr};
-  u_avr32_flashc_fcr.FCR.frdy = (enable != FALSE);
-  AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr;
-}
-
-
-Bool flashc_is_lock_error_int_enabled(void)
-{
-  return ((AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_LOCKE_MASK) != 0);
-}
-
-
-void flashc_enable_lock_error_int(Bool enable)
-{
-  u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr};
-  u_avr32_flashc_fcr.FCR.locke = (enable != FALSE);
-  AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr;
-}
-
-
-Bool flashc_is_prog_error_int_enabled(void)
-{
-  return ((AVR32_FLASHC.fcr & AVR32_FLASHC_FCR_PROGE_MASK) != 0);
-}
-
-
-void flashc_enable_prog_error_int(Bool enable)
-{
-  u_avr32_flashc_fcr_t u_avr32_flashc_fcr = {AVR32_FLASHC.fcr};
-  u_avr32_flashc_fcr.FCR.proge = (enable != FALSE);
-  AVR32_FLASHC.fcr = u_avr32_flashc_fcr.fcr;
-}
-
-
-//! @}
-
-
-/*! \name FLASHC Status
- */
-//! @{
-
-
-Bool flashc_is_ready(void)
-{
-  return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_FRDY_MASK) != 0);
-}
-
-
-void flashc_default_wait_until_ready(void)
-{
-  while (!flashc_is_ready());
-}
-
-
-void (*volatile flashc_wait_until_ready)(void) = flashc_default_wait_until_ready;
-
-
-/*! \brief Gets the error status of the FLASHC.
- *
- * \return The error status of the FLASHC built up from
- *         \c AVR32_FLASHC_FSR_LOCKE_MASK and \c AVR32_FLASHC_FSR_PROGE_MASK.
- *
- * \warning This hardware error status is cleared by all functions reading the
- *          Flash Status Register (FSR). This function is therefore not part of
- *          the driver's API which instead presents \ref flashc_is_lock_error
- *          and \ref flashc_is_programming_error.
- */
-static unsigned int flashc_get_error_status(void)
-{
-  return AVR32_FLASHC.fsr & (AVR32_FLASHC_FSR_LOCKE_MASK |
-                             AVR32_FLASHC_FSR_PROGE_MASK);
-}
-
-
-//! Sticky error status of the FLASHC.
-//! This variable is updated by functions that issue FLASHC commands. It
-//! contains the cumulated FLASHC error status of all the FLASHC commands issued
-//! by a function.
-static unsigned int flashc_error_status = 0;
-
-
-Bool flashc_is_lock_error(void)
-{
-  return ((flashc_error_status & AVR32_FLASHC_FSR_LOCKE_MASK) != 0);
-}
-
-
-Bool flashc_is_programming_error(void)
-{
-  return ((flashc_error_status & AVR32_FLASHC_FSR_PROGE_MASK) != 0);
-}
-
-
-//! @}
-
-
-/*! \name FLASHC Command Control
- */
-//! @{
-
-
-unsigned int flashc_get_command(void)
-{
-  return (AVR32_FLASHC.fcmd & AVR32_FLASHC_FCMD_CMD_MASK) >> AVR32_FLASHC_FCMD_CMD_OFFSET;
-}
-
-
-unsigned int flashc_get_page_number(void)
-{
-  return (AVR32_FLASHC.fcmd & AVR32_FLASHC_FCMD_PAGEN_MASK) >> AVR32_FLASHC_FCMD_PAGEN_OFFSET;
-}
-
-
-void flashc_issue_command(unsigned int command, int page_number)
-{
-  u_avr32_flashc_fcmd_t u_avr32_flashc_fcmd;
-  flashc_wait_until_ready();
-  u_avr32_flashc_fcmd.fcmd = AVR32_FLASHC.fcmd;
-  u_avr32_flashc_fcmd.FCMD.cmd = command;
-  if (page_number >= 0) u_avr32_flashc_fcmd.FCMD.pagen = page_number;
-  u_avr32_flashc_fcmd.FCMD.key = AVR32_FLASHC_FCMD_KEY_KEY;
-  AVR32_FLASHC.fcmd = u_avr32_flashc_fcmd.fcmd;
-  flashc_error_status = flashc_get_error_status();
-  flashc_wait_until_ready();
-}
-
-
-//! @}
-
-
-/*! \name FLASHC Global Commands
- */
-//! @{
-
-
-void flashc_no_operation(void)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_NOP, -1);
-}
-
-
-void flashc_erase_all(void)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EA, -1);
-}
-
-
-//! @}
-
-
-/*! \name FLASHC Protection Mechanisms
- */
-//! @{
-
-
-Bool flashc_is_security_bit_active(void)
-{
-  return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_SECURITY_MASK) != 0);
-}
-
-
-void flashc_activate_security_bit(void)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_SSB, -1);
-}
-
-
-unsigned int flashc_get_bootloader_protected_size(void)
-{
-  unsigned int bootprot = (1 << AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE) - 1 -
-                          flashc_read_gp_fuse_bitfield(AVR32_FLASHC_FGPFRLO_BOOTPROT_OFFSET,
-                                                       AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE);
-  return (bootprot) ? AVR32_FLASHC_PAGE_SIZE << bootprot : 0;
-}
-
-
-unsigned int flashc_set_bootloader_protected_size(unsigned int bootprot_size)
-{
-  flashc_set_gp_fuse_bitfield(AVR32_FLASHC_FGPFRLO_BOOTPROT_OFFSET,
-                              AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE,
-                              (1 << AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE) - 1 -
-                              ((bootprot_size) ?
-                               32 - clz((((min(max(bootprot_size, AVR32_FLASHC_PAGE_SIZE << 1),
-                                               AVR32_FLASHC_PAGE_SIZE <<
-                                               ((1 << AVR32_FLASHC_FGPFRLO_BOOTPROT_SIZE) - 1)) +
-                                           AVR32_FLASHC_PAGE_SIZE - 1) /
-                                          AVR32_FLASHC_PAGE_SIZE) << 1) - 1) - 1 :
-                               0));
-  return flashc_get_bootloader_protected_size();
-}
-
-
-Bool flashc_is_external_privileged_fetch_locked(void)
-{
-  return (!flashc_read_gp_fuse_bit(AVR32_FLASHC_FGPFRLO_EPFL_OFFSET));
-}
-
-
-void flashc_lock_external_privileged_fetch(Bool lock)
-{
-  flashc_set_gp_fuse_bit(AVR32_FLASHC_FGPFRLO_EPFL_OFFSET, !lock);
-}
-
-
-Bool flashc_is_page_region_locked(int page_number)
-{
-  return flashc_is_region_locked(flashc_get_page_region(page_number));
-}
-
-
-Bool flashc_is_region_locked(unsigned int region)
-{
-  return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_LOCK0_MASK << (region & (AVR32_FLASHC_REGIONS - 1))) != 0);
-}
-
-
-void flashc_lock_page_region(int page_number, Bool lock)
-{
-  flashc_issue_command((lock) ? AVR32_FLASHC_FCMD_CMD_LP : AVR32_FLASHC_FCMD_CMD_UP, page_number);
-}
-
-
-void flashc_lock_region(unsigned int region, Bool lock)
-{
-  flashc_lock_page_region(flashc_get_region_first_page_number(region), lock);
-}
-
-
-void flashc_lock_all_regions(Bool lock)
-{
-  unsigned int error_status = 0;
-  unsigned int region = AVR32_FLASHC_REGIONS;
-  while (region)
-  {
-    flashc_lock_region(--region, lock);
-    error_status |= flashc_error_status;
-  }
-  flashc_error_status = error_status;
-}
-
-
-//! @}
-
-
-/*! \name Access to General-Purpose Fuses
- */
-//! @{
-
-
-Bool flashc_read_gp_fuse_bit(unsigned int gp_fuse_bit)
-{
-  return ((flashc_read_all_gp_fuses() & 1ULL << (gp_fuse_bit & 0x3F)) != 0);
-}
-
-
-U64 flashc_read_gp_fuse_bitfield(unsigned int pos, unsigned int width)
-{
-  return flashc_read_all_gp_fuses() >> (pos & 0x3F) & ((1ULL << min(width, 64)) - 1);
-}
-
-
-U8 flashc_read_gp_fuse_byte(unsigned int gp_fuse_byte)
-{
-  return flashc_read_all_gp_fuses() >> ((gp_fuse_byte & 0x07) << 3);
-}
-
-
-U64 flashc_read_all_gp_fuses(void)
-{
-  return AVR32_FLASHC.fgpfrlo | (U64)AVR32_FLASHC.fgpfrhi << 32;
-}
-
-
-Bool flashc_erase_gp_fuse_bit(unsigned int gp_fuse_bit, Bool check)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EGPB, gp_fuse_bit & 0x3F);
-  return (check) ? flashc_read_gp_fuse_bit(gp_fuse_bit) : TRUE;
-}
-
-
-Bool flashc_erase_gp_fuse_bitfield(unsigned int pos, unsigned int width, Bool check)
-{
-  unsigned int error_status = 0;
-  unsigned int gp_fuse_bit;
-  pos &= 0x3F;
-  width = min(width, 64);
-  for (gp_fuse_bit = pos; gp_fuse_bit < pos + width; gp_fuse_bit++)
-  {
-    flashc_erase_gp_fuse_bit(gp_fuse_bit, FALSE);
-    error_status |= flashc_error_status;
-  }
-  flashc_error_status = error_status;
-  return (check) ? (flashc_read_gp_fuse_bitfield(pos, width) == (1ULL << width) - 1) : TRUE;
-}
-
-
-Bool flashc_erase_gp_fuse_byte(unsigned int gp_fuse_byte, Bool check)
-{
-  unsigned int error_status;
-  unsigned int current_gp_fuse_byte;
-  U64 value = flashc_read_all_gp_fuses();
-  flashc_erase_all_gp_fuses(FALSE);
-  error_status = flashc_error_status;
-  for (current_gp_fuse_byte = 0; current_gp_fuse_byte < 8; current_gp_fuse_byte++, value >>= 8)
-  {
-    if (current_gp_fuse_byte != gp_fuse_byte)
-    {
-      flashc_write_gp_fuse_byte(current_gp_fuse_byte, value);
-      error_status |= flashc_error_status;
-    }
-  }
-  flashc_error_status = error_status;
-  return (check) ? (flashc_read_gp_fuse_byte(gp_fuse_byte) == 0xFF) : TRUE;
-}
-
-
-Bool flashc_erase_all_gp_fuses(Bool check)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EAGPF, -1);
-  return (check) ? (flashc_read_all_gp_fuses() == 0xFFFFFFFFFFFFFFFFULL) : TRUE;
-}
-
-
-void flashc_write_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value)
-{
-  if (!value)
-    flashc_issue_command(AVR32_FLASHC_FCMD_CMD_WGPB, gp_fuse_bit & 0x3F);
-}
-
-
-void flashc_write_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value)
-{
-  unsigned int error_status = 0;
-  unsigned int gp_fuse_bit;
-  pos &= 0x3F;
-  width = min(width, 64);
-  for (gp_fuse_bit = pos; gp_fuse_bit < pos + width; gp_fuse_bit++, value >>= 1)
-  {
-    flashc_write_gp_fuse_bit(gp_fuse_bit, value & 0x01);
-    error_status |= flashc_error_status;
-  }
-  flashc_error_status = error_status;
-}
-
-
-void flashc_write_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_PGPFB, (gp_fuse_byte & 0x07) | value << 3);
-}
-
-
-void flashc_write_all_gp_fuses(U64 value)
-{
-  unsigned int error_status = 0;
-  unsigned int gp_fuse_byte;
-  for (gp_fuse_byte = 0; gp_fuse_byte < 8; gp_fuse_byte++, value >>= 8)
-  {
-    flashc_write_gp_fuse_byte(gp_fuse_byte, value);
-    error_status |= flashc_error_status;
-  }
-  flashc_error_status = error_status;
-}
-
-
-void flashc_set_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value)
-{
-  if (value)
-    flashc_erase_gp_fuse_bit(gp_fuse_bit, FALSE);
-  else
-    flashc_write_gp_fuse_bit(gp_fuse_bit, FALSE);
-}
-
-
-void flashc_set_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value)
-{
-  unsigned int error_status = 0;
-  unsigned int gp_fuse_bit;
-  pos &= 0x3F;
-  width = min(width, 64);
-  for (gp_fuse_bit = pos; gp_fuse_bit < pos + width; gp_fuse_bit++, value >>= 1)
-  {
-    flashc_set_gp_fuse_bit(gp_fuse_bit, value & 0x01);
-    error_status |= flashc_error_status;
-  }
-  flashc_error_status = error_status;
-}
-
-
-void flashc_set_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value)
-{
-  unsigned int error_status;
-  switch (value)
-  {
-  case 0xFF:
-    flashc_erase_gp_fuse_byte(gp_fuse_byte, FALSE);
-    break;
-  case 0x00:
-    flashc_write_gp_fuse_byte(gp_fuse_byte, 0x00);
-    break;
-  default:
-    flashc_erase_gp_fuse_byte(gp_fuse_byte, FALSE);
-    error_status = flashc_error_status;
-    flashc_write_gp_fuse_byte(gp_fuse_byte, value);
-    flashc_error_status |= error_status;
-  }
-}
-
-
-void flashc_set_all_gp_fuses(U64 value)
-{
-  unsigned int error_status;
-  switch (value)
-  {
-  case 0xFFFFFFFFFFFFFFFFULL:
-    flashc_erase_all_gp_fuses(FALSE);
-    break;
-  case 0x0000000000000000ULL:
-    flashc_write_all_gp_fuses(0x0000000000000000ULL);
-    break;
-  default:
-    flashc_erase_all_gp_fuses(FALSE);
-    error_status = flashc_error_status;
-    flashc_write_all_gp_fuses(value);
-    flashc_error_status |= error_status;
-  }
-}
-
-
-//! @}
-
-
-/*! \name Access to Flash Pages
- */
-//! @{
-
-
-void flashc_clear_page_buffer(void)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_CPB, -1);
-}
-
-
-Bool flashc_is_page_erased(void)
-{
-  return ((AVR32_FLASHC.fsr & AVR32_FLASHC_FSR_QPRR_MASK) != 0);
-}
-
-
-Bool flashc_quick_page_read(int page_number)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_QPR, page_number);
-  return flashc_is_page_erased();
-}
-
-
-Bool flashc_erase_page(int page_number, Bool check)
-{
-  Bool page_erased = TRUE;
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EP, page_number);
-  if (check)
-  {
-    unsigned int error_status = flashc_error_status;
-    page_erased = flashc_quick_page_read(-1);
-    flashc_error_status |= error_status;
-  }
-  return page_erased;
-}
-
-
-Bool flashc_erase_all_pages(Bool check)
-{
-  Bool all_pages_erased = TRUE;
-  unsigned int error_status = 0;
-  unsigned int page_number = flashc_get_page_count();
-  while (page_number)
-  {
-    all_pages_erased &= flashc_erase_page(--page_number, check);
-    error_status |= flashc_error_status;
-  }
-  flashc_error_status = error_status;
-  return all_pages_erased;
-}
-
-
-void flashc_write_page(int page_number)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_WP, page_number);
-}
-
-
-Bool flashc_quick_user_page_read(void)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_QPRUP, -1);
-  return flashc_is_page_erased();
-}
-
-
-Bool flashc_erase_user_page(Bool check)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_EUP, -1);
-  return (check) ? flashc_quick_user_page_read() : TRUE;
-}
-
-
-void flashc_write_user_page(void)
-{
-  flashc_issue_command(AVR32_FLASHC_FCMD_CMD_WUP, -1);
-}
-
-
-volatile void *flashc_memset8(volatile void *dst, U8 src, size_t nbytes, Bool erase)
-{
-  return flashc_memset16(dst, src | (U16)src << 8, nbytes, erase);
-}
-
-
-volatile void *flashc_memset16(volatile void *dst, U16 src, size_t nbytes, Bool erase)
-{
-  return flashc_memset32(dst, src | (U32)src << 16, nbytes, erase);
-}
-
-
-volatile void *flashc_memset32(volatile void *dst, U32 src, size_t nbytes, Bool erase)
-{
-  return flashc_memset64(dst, src | (U64)src << 32, nbytes, erase);
-}
-
-
-volatile void *flashc_memset64(volatile void *dst, U64 src, size_t nbytes, Bool erase)
-{
-  // Use aggregated pointers to have several alignments available for a same address.
-  UnionCVPtr flash_array_end;
-  UnionVPtr dest;
-  Union64 source = {0};
-  StructCVPtr dest_end;
-  UnionCVPtr flash_page_source_end;
-  Bool incomplete_flash_page_end;
-  Union64 flash_dword;
-  UnionVPtr tmp;
-  unsigned int error_status = 0;
-  unsigned int i;
-
-  // Reformat arguments.
-  flash_array_end.u8ptr = AVR32_FLASH + flashc_get_flash_size();
-  dest.u8ptr = dst;
-  for (i = (Get_align((U32)dest.u8ptr, sizeof(U64)) - 1) & (sizeof(U64) - 1);
-       src; i = (i - 1) & (sizeof(U64) - 1))
-  {
-    source.u8[i] = src;
-    src >>= 8;
-  }
-  dest_end.u8ptr = dest.u8ptr + nbytes;
-
-  // If destination is outside flash, go to next flash page if any.
-  if (dest.u8ptr < AVR32_FLASH)
-  {
-    dest.u8ptr = AVR32_FLASH;
-  }
-  else if (flash_array_end.u8ptr <= dest.u8ptr && dest.u8ptr < AVR32_FLASHC_USER_PAGE)
-  {
-    dest.u8ptr = AVR32_FLASHC_USER_PAGE;
-  }
-
-  // If end of destination is outside flash, move it to the end of the previous flash page if any.
-  if (dest_end.u8ptr > AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE)
-  {
-    dest_end.u8ptr = AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE;
-  }
-  else if (AVR32_FLASHC_USER_PAGE >= dest_end.u8ptr && dest_end.u8ptr > flash_array_end.u8ptr)
-  {
-    dest_end.u8ptr = flash_array_end.u8ptr;
-  }
-
-  // Align each end of destination pointer with its natural boundary.
-  dest_end.u16ptr = (U16 *)Align_down((U32)dest_end.u8ptr, sizeof(U16));
-  dest_end.u32ptr = (U32 *)Align_down((U32)dest_end.u16ptr, sizeof(U32));
-  dest_end.u64ptr = (U64 *)Align_down((U32)dest_end.u32ptr, sizeof(U64));
-
-  // While end of destination is not reached...
-  while (dest.u8ptr < dest_end.u8ptr)
-  {
-    // Clear the page buffer in order to prepare data for a flash page write.
-    flashc_clear_page_buffer();
-    error_status |= flashc_error_status;
-
-    // Determine where the source data will end in the current flash page.
-    flash_page_source_end.u64ptr =
-      (U64 *)min((U32)dest_end.u64ptr,
-                 Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) + AVR32_FLASHC_PAGE_SIZE);
-
-    // Determine if the current destination page has an incomplete end.
-    incomplete_flash_page_end = (Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) >=
-                                 Align_down((U32)dest_end.u8ptr, AVR32_FLASHC_PAGE_SIZE));
-
-    // Use a flash double-word buffer to manage unaligned accesses.
-    flash_dword.u64 = source.u64;
-
-    // If destination does not point to the beginning of the current flash page...
-    if (!Test_align((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE))
-    {
-      // Fill the beginning of the page buffer with the current flash page data.
-      // This is required by the hardware, even if page erase is not requested,
-      // in order to be able to write successfully to erased parts of flash
-      // pages that have already been written to.
-      for (tmp.u8ptr = (U8 *)Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE);
-           tmp.u64ptr < (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64));
-           tmp.u64ptr++)
-        *tmp.u64ptr = *tmp.u64ptr;
-
-      // If destination is not 64-bit aligned...
-      if (!Test_align((U32)dest.u8ptr, sizeof(U64)))
-      {
-        // Fill the beginning of the flash double-word buffer with the current
-        // flash page data.
-        // This is required by the hardware, even if page erase is not
-        // requested, in order to be able to write successfully to erased parts
-        // of flash pages that have already been written to.
-        for (i = 0; i < Get_align((U32)dest.u8ptr, sizeof(U64)); i++)
-          flash_dword.u8[i] = *tmp.u8ptr++;
-
-        // Align the destination pointer with its 64-bit boundary.
-        dest.u64ptr = (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64));
-
-        // If the current destination double-word is not the last one...
-        if (dest.u64ptr < dest_end.u64ptr)
-        {
-          // Write the flash double-word buffer to the page buffer and reinitialize it.
-          *dest.u64ptr++ = flash_dword.u64;
-          flash_dword.u64 = source.u64;
-        }
-      }
-    }
-
-    // Write the source data to the page buffer with 64-bit alignment.
-    for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--)
-      *dest.u64ptr++ = source.u64;
-
-    // If the current destination page has an incomplete end...
-    if (incomplete_flash_page_end)
-    {
-      // This is required by the hardware, even if page erase is not requested,
-      // in order to be able to write successfully to erased parts of flash
-      // pages that have already been written to.
-      {
-        tmp.u8ptr = (volatile U8 *)dest_end.u8ptr;
-
-        // If end of destination is not 64-bit aligned...
-        if (!Test_align((U32)dest_end.u8ptr, sizeof(U64)))
-        {
-          // Fill the end of the flash double-word buffer with the current flash page data.
-          for (i = Get_align((U32)dest_end.u8ptr, sizeof(U64)); i < sizeof(U64); i++)
-            flash_dword.u8[i] = *tmp.u8ptr++;
-
-          // Write the flash double-word buffer to the page buffer.
-          *dest.u64ptr++ = flash_dword.u64;
-        }
-
-        // Fill the end of the page buffer with the current flash page data.
-        for (; !Test_align((U32)tmp.u64ptr, AVR32_FLASHC_PAGE_SIZE); tmp.u64ptr++)
-          *tmp.u64ptr = *tmp.u64ptr;
-      }
-    }
-
-    // If the current flash page is in the flash array...
-    if (dest.u8ptr <= AVR32_FLASHC_USER_PAGE)
-    {
-      // Erase the current page if requested and write it from the page buffer.
-      if (erase)
-      {
-        flashc_erase_page(-1, FALSE);
-        error_status |= flashc_error_status;
-      }
-      flashc_write_page(-1);
-      error_status |= flashc_error_status;
-
-      // If the end of the flash array is reached, go to the User page.
-      if (dest.u8ptr >= flash_array_end.u8ptr)
-        dest.u8ptr = AVR32_FLASHC_USER_PAGE;
-    }
-    // If the current flash page is the User page...
-    else
-    {
-      // Erase the User page if requested and write it from the page buffer.
-      if (erase)
-      {
-        flashc_erase_user_page(FALSE);
-        error_status |= flashc_error_status;
-      }
-      flashc_write_user_page();
-      error_status |= flashc_error_status;
-    }
-  }
-
-  // Update the FLASHC error status.
-  flashc_error_status = error_status;
-
-  // Return the initial destination pointer as the standard memset function does.
-  return dst;
-}
-
-
-volatile void *flashc_memcpy(volatile void *dst, const void *src, size_t nbytes, Bool erase)
-{
-  // Use aggregated pointers to have several alignments available for a same address.
-  UnionCVPtr flash_array_end;
-  UnionVPtr dest;
-  UnionCPtr source;
-  StructCVPtr dest_end;
-  UnionCVPtr flash_page_source_end;
-  Bool incomplete_flash_page_end;
-  Union64 flash_dword;
-  Bool flash_dword_pending = FALSE;
-  UnionVPtr tmp;
-  unsigned int error_status = 0;
-  unsigned int i, j;
-
-  // Reformat arguments.
-  flash_array_end.u8ptr = AVR32_FLASH + flashc_get_flash_size();
-  dest.u8ptr = dst;
-  source.u8ptr = src;
-  dest_end.u8ptr = dest.u8ptr + nbytes;
-
-  // If destination is outside flash, go to next flash page if any.
-  if (dest.u8ptr < AVR32_FLASH)
-  {
-    source.u8ptr += AVR32_FLASH - dest.u8ptr;
-    dest.u8ptr = AVR32_FLASH;
-  }
-  else if (flash_array_end.u8ptr <= dest.u8ptr && dest.u8ptr < AVR32_FLASHC_USER_PAGE)
-  {
-    source.u8ptr += AVR32_FLASHC_USER_PAGE - dest.u8ptr;
-    dest.u8ptr = AVR32_FLASHC_USER_PAGE;
-  }
-
-  // If end of destination is outside flash, move it to the end of the previous flash page if any.
-  if (dest_end.u8ptr > AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE)
-  {
-    dest_end.u8ptr = AVR32_FLASHC_USER_PAGE + AVR32_FLASHC_USER_PAGE_SIZE;
-  }
-  else if (AVR32_FLASHC_USER_PAGE >= dest_end.u8ptr && dest_end.u8ptr > flash_array_end.u8ptr)
-  {
-    dest_end.u8ptr = flash_array_end.u8ptr;
-  }
-
-  // Align each end of destination pointer with its natural boundary.
-  dest_end.u16ptr = (U16 *)Align_down((U32)dest_end.u8ptr, sizeof(U16));
-  dest_end.u32ptr = (U32 *)Align_down((U32)dest_end.u16ptr, sizeof(U32));
-  dest_end.u64ptr = (U64 *)Align_down((U32)dest_end.u32ptr, sizeof(U64));
-
-  // While end of destination is not reached...
-  while (dest.u8ptr < dest_end.u8ptr)
-  {
-    // Clear the page buffer in order to prepare data for a flash page write.
-    flashc_clear_page_buffer();
-    error_status |= flashc_error_status;
-
-    // Determine where the source data will end in the current flash page.
-    flash_page_source_end.u64ptr =
-      (U64 *)min((U32)dest_end.u64ptr,
-                 Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) + AVR32_FLASHC_PAGE_SIZE);
-
-    // Determine if the current destination page has an incomplete end.
-    incomplete_flash_page_end = (Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE) >=
-                                 Align_down((U32)dest_end.u8ptr, AVR32_FLASHC_PAGE_SIZE));
-
-    // If destination does not point to the beginning of the current flash page...
-    if (!Test_align((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE))
-    {
-      // Fill the beginning of the page buffer with the current flash page data.
-      // This is required by the hardware, even if page erase is not requested,
-      // in order to be able to write successfully to erased parts of flash
-      // pages that have already been written to.
-      for (tmp.u8ptr = (U8 *)Align_down((U32)dest.u8ptr, AVR32_FLASHC_PAGE_SIZE);
-           tmp.u64ptr < (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64));
-           tmp.u64ptr++)
-        *tmp.u64ptr = *tmp.u64ptr;
-
-      // If destination is not 64-bit aligned...
-      if (!Test_align((U32)dest.u8ptr, sizeof(U64)))
-      {
-        // Fill the beginning of the flash double-word buffer with the current
-        // flash page data.
-        // This is required by the hardware, even if page erase is not
-        // requested, in order to be able to write successfully to erased parts
-        // of flash pages that have already been written to.
-        for (i = 0; i < Get_align((U32)dest.u8ptr, sizeof(U64)); i++)
-          flash_dword.u8[i] = *tmp.u8ptr++;
-
-        // Fill the end of the flash double-word buffer with the source data.
-        for (; i < sizeof(U64); i++)
-          flash_dword.u8[i] = *source.u8ptr++;
-
-        // Align the destination pointer with its 64-bit boundary.
-        dest.u64ptr = (U64 *)Align_down((U32)dest.u8ptr, sizeof(U64));
-
-        // If the current destination double-word is not the last one...
-        if (dest.u64ptr < dest_end.u64ptr)
-        {
-          // Write the flash double-word buffer to the page buffer.
-          *dest.u64ptr++ = flash_dword.u64;
-        }
-        // If the current destination double-word is the last one, the flash
-        // double-word buffer must be kept for later.
-        else flash_dword_pending = TRUE;
-      }
-    }
-
-    // Read the source data with the maximal possible alignment and write it to
-    // the page buffer with 64-bit alignment.
-    switch (Get_align((U32)source.u8ptr, sizeof(U32)))
-    {
-    case 0:
-      for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--)
-        *dest.u64ptr++ = *source.u64ptr++;
-      break;
-
-    case sizeof(U16):
-      for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--)
-      {
-        for (j = 0; j < sizeof(U64) / sizeof(U16); j++) flash_dword.u16[j] = *source.u16ptr++;
-        *dest.u64ptr++ = flash_dword.u64;
-      }
-      break;
-
-    default:
-      for (i = flash_page_source_end.u64ptr - dest.u64ptr; i; i--)
-      {
-        for (j = 0; j < sizeof(U64); j++) flash_dword.u8[j] = *source.u8ptr++;
-        *dest.u64ptr++ = flash_dword.u64;
-      }
-    }
-
-    // If the current destination page has an incomplete end...
-    if (incomplete_flash_page_end)
-    {
-      // If the flash double-word buffer is in use, do not initialize it.
-      if (flash_dword_pending) i = Get_align((U32)dest_end.u8ptr, sizeof(U64));
-      // If the flash double-word buffer is free...
-      else
-      {
-        // Fill the beginning of the flash double-word buffer with the source data.
-        for (i = 0; i < Get_align((U32)dest_end.u8ptr, sizeof(U64)); i++)
-          flash_dword.u8[i] = *source.u8ptr++;
-      }
-
-      // This is required by the hardware, even if page erase is not requested,
-      // in order to be able to write successfully to erased parts of flash
-      // pages that have already been written to.
-      {
-        tmp.u8ptr = (volatile U8 *)dest_end.u8ptr;
-
-        // If end of destination is not 64-bit aligned...
-        if (!Test_align((U32)dest_end.u8ptr, sizeof(U64)))
-        {
-          // Fill the end of the flash double-word buffer with the current flash page data.
-          for (; i < sizeof(U64); i++)
-            flash_dword.u8[i] = *tmp.u8ptr++;
-
-          // Write the flash double-word buffer to the page buffer.
-          *dest.u64ptr++ = flash_dword.u64;
-        }
-
-        // Fill the end of the page buffer with the current flash page data.
-        for (; !Test_align((U32)tmp.u64ptr, AVR32_FLASHC_PAGE_SIZE); tmp.u64ptr++)
-          *tmp.u64ptr = *tmp.u64ptr;
-      }
-    }
-
-    // If the current flash page is in the flash array...
-    if (dest.u8ptr <= AVR32_FLASHC_USER_PAGE)
-    {
-      // Erase the current page if requested and write it from the page buffer.
-      if (erase)
-      {
-        flashc_erase_page(-1, FALSE);
-        error_status |= flashc_error_status;
-      }
-      flashc_write_page(-1);
-      error_status |= flashc_error_status;
-
-      // If the end of the flash array is reached, go to the User page.
-      if (dest.u8ptr >= flash_array_end.u8ptr)
-      {
-        source.u8ptr += AVR32_FLASHC_USER_PAGE - dest.u8ptr;
-        dest.u8ptr = AVR32_FLASHC_USER_PAGE;
-      }
-    }
-    // If the current flash page is the User page...
-    else
-    {
-      // Erase the User page if requested and write it from the page buffer.
-      if (erase)
-      {
-        flashc_erase_user_page(FALSE);
-        error_status |= flashc_error_status;
-      }
-      flashc_write_user_page();
-      error_status |= flashc_error_status;
-    }
-  }
-
-  // Update the FLASHC error status.
-  flashc_error_status = error_status;
-
-  // Return the initial destination pointer as the standard memcpy function does.
-  return dst;
-}
-
-
-#if UC3C
-void flashc_set_flash_waitstate_and_readmode(unsigned long cpu_f_hz)
-{
-  //! Device-specific data
-  #undef AVR32_FLASHC_FWS_0_MAX_FREQ
-  #undef AVR32_FLASHC_FWS_1_MAX_FREQ
-  #undef AVR32_FLASHC_HSEN_FWS_0_MAX_FREQ
-  #undef AVR32_FLASHC_HSEN_FWS_1_MAX_FREQ
-  #define AVR32_FLASHC_FWS_0_MAX_FREQ           33000000
-  #define AVR32_FLASHC_FWS_1_MAX_FREQ           66000000
-  #define AVR32_FLASHC_HSEN_FWS_0_MAX_FREQ      33000000
-  #define AVR32_FLASHC_HSEN_FWS_1_MAX_FREQ      72000000
-  // These defines are missing from or wrong in the toolchain header files uc3cxxx.h
-  // Put a Bugzilla 
-
-  if(cpu_f_hz > AVR32_FLASHC_HSEN_FWS_0_MAX_FREQ)    // > 33MHz
-  {
-    // Set a wait-state
-    flashc_set_wait_state(1);
-    if(cpu_f_hz <= AVR32_FLASHC_FWS_1_MAX_FREQ) // <= 66MHz and >33Mhz
-    {
-      // Disable the high-speed read mode.      
-      flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSDIS, -1);
-    }
-    else // > 66Mhz
-    {
-      // Enable the high-speed read mode.
-      flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSEN, -1);                     
-    }
-  }
-  else  // <= 33 MHz    
-  {
-    // Disable wait-state
-    flashc_set_wait_state(0);
-
-    // Disable the high-speed read mode.
-    flashc_issue_command(AVR32_FLASHC_FCMD_CMD_HSDIS, -1);
-    
-  }
-}
-#endif // UC3C device-specific implementation
-
-//! @}
diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h
deleted file mode 100644
index 9f2547a..0000000
--- a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/DRIVERS/FLASHC/flashc.h
+++ /dev/null
@@ -1,1002 +0,0 @@
-/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief FLASHC driver for AVR32 UC3.
- *
- * AVR32 Flash Controller driver module.
- *
- * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
- * - Supported devices:  All AVR32 devices with a FLASHC module can be used.
- * - AppNote:
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#ifndef _FLASHC_H_
-#define _FLASHC_H_
-
-#include <avr32/io.h>
-#include <stddef.h>
-#include "compiler.h"
-
-//! Number of flash regions defined by the FLASHC.
-#define AVR32_FLASHC_REGIONS  (AVR32_FLASHC_FLASH_SIZE /\
-                               (AVR32_FLASHC_PAGES_PR_REGION * AVR32_FLASHC_PAGE_SIZE))
-
-
-/*! \name Flash Properties
- */
-//! @{
-
-/*! \brief Gets the size of the whole flash array.
- *
- * \return The size of the whole flash array in bytes.
- */
-extern unsigned int flashc_get_flash_size(void);
-
-/*! \brief Gets the total number of pages in the flash array.
- *
- * \return The total number of pages in the flash array.
- */
-extern unsigned int flashc_get_page_count(void);
-
-/*! \brief Gets the number of pages in each flash region.
- *
- * \return The number of pages in each flash region.
- */
-extern unsigned int flashc_get_page_count_per_region(void);
-
-/*! \brief Gets the region number of a page.
- *
- * \param page_number The page number:
- *   \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within
- *        the flash array;
- *   \arg <tt>< 0</tt>: the current page number.
- *
- * \return The region number of the specified page.
- */
-extern unsigned int flashc_get_page_region(int page_number);
-
-/*! \brief Gets the number of the first page of a region.
- *
- * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>.
- *
- * \return The number of the first page of the specified region.
- */
-extern unsigned int flashc_get_region_first_page_number(unsigned int region);
-
-//! @}
-
-
-/*! \name FLASHC Control
- */
-//! @{
-
-/*! \brief Gets the number of wait states of flash read accesses.
- *
- * \return The number of wait states of flash read accesses.
- */
-extern unsigned int flashc_get_wait_state(void);
-
-/*! \brief Sets the number of wait states of flash read accesses.
- *
- * \param wait_state The number of wait states of flash read accesses: \c 0 to
- *                   \c 1.
- */
-extern void flashc_set_wait_state(unsigned int wait_state);
-
-/*! \brief Tells whether the Flash Ready interrupt is enabled.
- *
- * \return Whether the Flash Ready interrupt is enabled.
- */
-extern Bool flashc_is_ready_int_enabled(void);
-
-/*! \brief Enables or disables the Flash Ready interrupt.
- *
- * \param enable Whether to enable the Flash Ready interrupt: \c TRUE or
- *               \c FALSE.
- */
-extern void flashc_enable_ready_int(Bool enable);
-
-/*! \brief Tells whether the Lock Error interrupt is enabled.
- *
- * \return Whether the Lock Error interrupt is enabled.
- */
-extern Bool flashc_is_lock_error_int_enabled(void);
-
-/*! \brief Enables or disables the Lock Error interrupt.
- *
- * \param enable Whether to enable the Lock Error interrupt: \c TRUE or
- *               \c FALSE.
- */
-extern void flashc_enable_lock_error_int(Bool enable);
-
-/*! \brief Tells whether the Programming Error interrupt is enabled.
- *
- * \return Whether the Programming Error interrupt is enabled.
- */
-extern Bool flashc_is_prog_error_int_enabled(void);
-
-/*! \brief Enables or disables the Programming Error interrupt.
- *
- * \param enable Whether to enable the Programming Error interrupt: \c TRUE or
- *               \c FALSE.
- */
-extern void flashc_enable_prog_error_int(Bool enable);
-
-//! @}
-
-
-/*! \name FLASHC Status
- */
-//! @{
-
-/*! \brief Tells whether the FLASHC is ready to run a new command.
- *
- * \return Whether the FLASHC is ready to run a new command.
- */
-extern Bool flashc_is_ready(void);
-
-/*! \brief Waits actively until the FLASHC is ready to run a new command.
- *
- * This is the default function assigned to \ref flashc_wait_until_ready.
- */
-extern void flashc_default_wait_until_ready(void);
-
-//! Pointer to the function used by the driver when it needs to wait until the
-//! FLASHC is ready to run a new command.
-//! The default function is \ref flashc_default_wait_until_ready.
-//! The user may change this pointer to use another implementation.
-extern void (*volatile flashc_wait_until_ready)(void);
-
-/*! \brief Tells whether a Lock Error has occurred during the last function
- *         called that issued one or more FLASHC commands.
- *
- * \return Whether a Lock Error has occurred during the last function called
- *         that issued one or more FLASHC commands.
- */
-extern Bool flashc_is_lock_error(void);
-
-/*! \brief Tells whether a Programming Error has occurred during the last
- *         function called that issued one or more FLASHC commands.
- *
- * \return Whether a Programming Error has occurred during the last function
- *         called that issued one or more FLASHC commands.
- */
-extern Bool flashc_is_programming_error(void);
-
-//! @}
-
-
-/*! \name FLASHC Command Control
- */
-//! @{
-
-/*! \brief Gets the last issued FLASHC command.
- *
- * \return The last issued FLASHC command.
- */
-extern unsigned int flashc_get_command(void);
-
-/*! \brief Gets the current FLASHC page number.
- *
- * \return The current FLASHC page number.
- */
-extern unsigned int flashc_get_page_number(void);
-
-/*! \brief Issues a FLASHC command.
- *
- * \param command The command: \c AVR32_FLASHC_FCMD_CMD_x.
- * \param page_number The page number to apply the command to:
- *   \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within
- *        the flash array;
- *   \arg <tt>< 0</tt>: use this to apply the command to the current page number
- *        or if the command does not apply to any page number;
- *   \arg this argument may have other meanings according to the command. See
- *        the FLASHC chapter of the MCU datasheet.
- *
- * \warning A Lock Error is issued if the command violates the protection
- *          mechanism.
- *
- * \warning A Programming Error is issued if the command is invalid.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_issue_command(unsigned int command, int page_number);
-
-//! @}
-
-
-/*! \name FLASHC Global Commands
- */
-//! @{
-
-/*! \brief Issues a No Operation command to the FLASHC.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_no_operation(void);
-
-/*! \brief Issues an Erase All command to the FLASHC.
- *
- * This command erases all bits in the flash array, the general-purpose fuse
- * bits and the Security bit. The User page is not erased.
- *
- * This command also ensures that all volatile memories, such as register file
- * and RAMs, are erased before the Security bit is erased, i.e. deactivated.
- *
- * \warning A Lock Error is issued if at least one region is locked or the
- *          bootloader protection is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- */
-extern void flashc_erase_all(void);
-
-//! @}
-
-
-/*! \name FLASHC Protection Mechanisms
- */
-//! @{
-
-/*! \brief Tells whether the Security bit is active.
- *
- * \return Whether the Security bit is active.
- */
-extern Bool flashc_is_security_bit_active(void);
-
-/*! \brief Activates the Security bit.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_activate_security_bit(void);
-
-/*! \brief Gets the bootloader protected size.
- *
- * \return The bootloader protected size in bytes.
- */
-extern unsigned int flashc_get_bootloader_protected_size(void);
-
-/*! \brief Sets the bootloader protected size.
- *
- * \param bootprot_size The wanted bootloader protected size in bytes. If this
- *                      size is not supported, the actual size will be the
- *                      nearest greater available size or the maximal possible
- *                      size if the requested size is too large.
- *
- * \return The actual bootloader protected size in bytes.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern unsigned int flashc_set_bootloader_protected_size(unsigned int bootprot_size);
-
-/*! \brief Tells whether external privileged fetch is locked.
- *
- * \return Whether external privileged fetch is locked.
- */
-extern Bool flashc_is_external_privileged_fetch_locked(void);
-
-/*! \brief Locks or unlocks external privileged fetch.
- *
- * \param lock Whether to lock external privileged fetch: \c TRUE or \c FALSE.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_lock_external_privileged_fetch(Bool lock);
-
-/*! \brief Tells whether the region of a page is locked.
- *
- * \param page_number The page number:
- *   \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within
- *        the flash array;
- *   \arg <tt>< 0</tt>: the current page number.
- *
- * \return Whether the region of the specified page is locked.
- */
-extern Bool flashc_is_page_region_locked(int page_number);
-
-/*! \brief Tells whether a region is locked.
- *
- * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>.
- *
- * \return Whether the specified region is locked.
- */
-extern Bool flashc_is_region_locked(unsigned int region);
-
-/*! \brief Locks or unlocks the region of a page.
- *
- * \param page_number The page number:
- *   \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within
- *        the flash array;
- *   \arg <tt>< 0</tt>: the current page number.
- * \param lock Whether to lock the region of the specified page: \c TRUE or
- *             \c FALSE.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_lock_page_region(int page_number, Bool lock);
-
-/*! \brief Locks or unlocks a region.
- *
- * \param region The region number: \c 0 to <tt>(AVR32_FLASHC_REGIONS - 1)</tt>.
- * \param lock Whether to lock the specified region: \c TRUE or \c FALSE.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_lock_region(unsigned int region, Bool lock);
-
-/*! \brief Locks or unlocks all regions.
- *
- * \param lock Whether to lock the regions: \c TRUE or \c FALSE.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_lock_all_regions(Bool lock);
-
-//! @}
-
-
-/*! \name Access to General-Purpose Fuses
- */
-//! @{
-
-/*! \brief Reads a general-purpose fuse bit.
- *
- * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63.
- *
- * \return The value of the specified general-purpose fuse bit.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern Bool flashc_read_gp_fuse_bit(unsigned int gp_fuse_bit);
-
-/*! \brief Reads a general-purpose fuse bit-field.
- *
- * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to
- *            \c 63.
- * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to
- *              \c 64.
- *
- * \return The value of the specified general-purpose fuse bit-field.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern U64 flashc_read_gp_fuse_bitfield(unsigned int pos, unsigned int width);
-
-/*! \brief Reads a general-purpose fuse byte.
- *
- * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7.
- *
- * \return The value of the specified general-purpose fuse byte.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern U8 flashc_read_gp_fuse_byte(unsigned int gp_fuse_byte);
-
-/*! \brief Reads all general-purpose fuses.
- *
- * \return The value of all general-purpose fuses as a word.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern U64 flashc_read_all_gp_fuses(void);
-
-/*! \brief Erases a general-purpose fuse bit.
- *
- * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63.
- * \param check Whether to check erase: \c TRUE or \c FALSE.
- *
- * \return Whether the erase succeeded or always \c TRUE if erase check was not
- *         requested.
- *
- * \warning A Lock Error is issued if the Security bit is active and the command
- *          is applied to BOOTPROT or EPFL fuses.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern Bool flashc_erase_gp_fuse_bit(unsigned int gp_fuse_bit, Bool check);
-
-/*! \brief Erases a general-purpose fuse bit-field.
- *
- * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to
- *            \c 63.
- * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to
- *              \c 64.
- * \param check Whether to check erase: \c TRUE or \c FALSE.
- *
- * \return Whether the erase succeeded or always \c TRUE if erase check was not
- *         requested.
- *
- * \warning A Lock Error is issued if the Security bit is active and the command
- *          is applied to BOOTPROT or EPFL fuses.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern Bool flashc_erase_gp_fuse_bitfield(unsigned int pos, unsigned int width, Bool check);
-
-/*! \brief Erases a general-purpose fuse byte.
- *
- * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7.
- * \param check Whether to check erase: \c TRUE or \c FALSE.
- *
- * \return Whether the erase succeeded or always \c TRUE if erase check was not
- *         requested.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern Bool flashc_erase_gp_fuse_byte(unsigned int gp_fuse_byte, Bool check);
-
-/*! \brief Erases all general-purpose fuses.
- *
- * \param check Whether to check erase: \c TRUE or \c FALSE.
- *
- * \return Whether the erase succeeded or always \c TRUE if erase check was not
- *         requested.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern Bool flashc_erase_all_gp_fuses(Bool check);
-
-/*! \brief Writes a general-purpose fuse bit.
- *
- * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63.
- * \param value The value of the specified general-purpose fuse bit.
- *
- * \warning A Lock Error is issued if the Security bit is active and the command
- *          is applied to BOOTPROT or EPFL fuses.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note A write operation can only clear bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_write_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value);
-
-/*! \brief Writes a general-purpose fuse bit-field.
- *
- * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to
- *            \c 63.
- * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to
- *              \c 64.
- * \param value The value of the specified general-purpose fuse bit-field.
- *
- * \warning A Lock Error is issued if the Security bit is active and the command
- *          is applied to BOOTPROT or EPFL fuses.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note A write operation can only clear bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_write_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value);
-
-/*! \brief Writes a general-purpose fuse byte.
- *
- * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7.
- * \param value The value of the specified general-purpose fuse byte.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note A write operation can only clear bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_write_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value);
-
-/*! \brief Writes all general-purpose fuses.
- *
- * \param value The value of all general-purpose fuses as a word.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note A write operation can only clear bits.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_write_all_gp_fuses(U64 value);
-
-/*! \brief Sets a general-purpose fuse bit with the appropriate erase and write
- *         operations.
- *
- * \param gp_fuse_bit The general-purpose fuse bit: \c 0 to \c 63.
- * \param value The value of the specified general-purpose fuse bit.
- *
- * \warning A Lock Error is issued if the Security bit is active and the command
- *          is applied to BOOTPROT or EPFL fuses.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_set_gp_fuse_bit(unsigned int gp_fuse_bit, Bool value);
-
-/*! \brief Sets a general-purpose fuse bit-field with the appropriate erase and
- *         write operations.
- *
- * \param pos The bit-position of the general-purpose fuse bit-field: \c 0 to
- *            \c 63.
- * \param width The bit-width of the general-purpose fuse bit-field: \c 0 to
- *              \c 64.
- * \param value The value of the specified general-purpose fuse bit-field.
- *
- * \warning A Lock Error is issued if the Security bit is active and the command
- *          is applied to BOOTPROT or EPFL fuses.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_set_gp_fuse_bitfield(unsigned int pos, unsigned int width, U64 value);
-
-/*! \brief Sets a general-purpose fuse byte with the appropriate erase and write
- *         operations.
- *
- * \param gp_fuse_byte The general-purpose fuse byte: \c 0 to \c 7.
- * \param value The value of the specified general-purpose fuse byte.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_set_gp_fuse_byte(unsigned int gp_fuse_byte, U8 value);
-
-/*! \brief Sets all general-purpose fuses with the appropriate erase and write
- *         operations.
- *
- * \param value The value of all general-purpose fuses as a word.
- *
- * \warning A Lock Error is issued if the Security bit is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note The actual number of general-purpose fuse bits implemented by hardware
- *       is given by \c AVR32_FLASHC_GPF_NUM. The other bits among the 64 are
- *       fixed at 1 by hardware.
- */
-extern void flashc_set_all_gp_fuses(U64 value);
-
-//! @}
-
-
-/*! \name Access to Flash Pages
- */
-//! @{
-
-/*! \brief Clears the page buffer.
- *
- * This command resets all bits in the page buffer to one. Write accesses to the
- * page buffer can only change page buffer bits from one to zero.
- *
- * \warning The page buffer is not automatically reset after a page write.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern void flashc_clear_page_buffer(void);
-
-/*! \brief Tells whether the page to which the last Quick Page Read or Quick
- *         Page Read User Page command was applied was erased.
- *
- * \return Whether the page to which the last Quick Page Read or Quick Page Read
- *         User Page command was applied was erased.
- */
-extern Bool flashc_is_page_erased(void);
-
-/*! \brief Applies the Quick Page Read command to a page.
- *
- * \param page_number The page number:
- *   \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within
- *        the flash array;
- *   \arg <tt>< 0</tt>: the current page number.
- *
- * \return Whether the specified page is erased.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern Bool flashc_quick_page_read(int page_number);
-
-/*! \brief Erases a page.
- *
- * \param page_number The page number:
- *   \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within
- *        the flash array;
- *   \arg <tt>< 0</tt>: the current page number.
- * \param check Whether to check erase: \c TRUE or \c FALSE.
- *
- * \return Whether the erase succeeded or always \c TRUE if erase check was not
- *         requested.
- *
- * \warning A Lock Error is issued if the command is applied to a page belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- */
-extern Bool flashc_erase_page(int page_number, Bool check);
-
-/*! \brief Erases all pages within the flash array.
- *
- * \param check Whether to check erase: \c TRUE or \c FALSE.
- *
- * \return Whether the erase succeeded or always \c TRUE if erase check was not
- *         requested.
- *
- * \warning A Lock Error is issued if at least one region is locked or the
- *          bootloader protection is active.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- */
-extern Bool flashc_erase_all_pages(Bool check);
-
-/*! \brief Writes a page from the page buffer.
- *
- * \param page_number The page number:
- *   \arg \c 0 to <tt>(flashc_get_page_count() - 1)</tt>: a page number within
- *        the flash array;
- *   \arg <tt>< 0</tt>: the current page number.
- *
- * \warning A Lock Error is issued if the command is applied to a page belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \warning The page buffer is not automatically reset after a page write.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note A write operation can only clear bits.
- */
-extern void flashc_write_page(int page_number);
-
-/*! \brief Issues a Quick Page Read User Page command to the FLASHC.
- *
- * \return Whether the User page is erased.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern Bool flashc_quick_user_page_read(void);
-
-/*! \brief Erases the User page.
- *
- * \param check Whether to check erase: \c TRUE or \c FALSE.
- *
- * \return Whether the erase succeeded or always \c TRUE if erase check was not
- *         requested.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note An erase operation can only set bits.
- */
-extern Bool flashc_erase_user_page(Bool check);
-
-/*! \brief Writes the User page from the page buffer.
- *
- * \warning The page buffer is not automatically reset after a page write.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- *
- * \note A write operation can only clear bits.
- */
-extern void flashc_write_user_page(void);
-
-/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst
- *         from the repeated \a src source byte.
- *
- * The destination areas that are not within the flash array or the User page
- * are ignored.
- *
- * All pointer and size alignments are supported.
- *
- * \param dst Pointer to flash destination.
- * \param src Source byte.
- * \param nbytes Number of bytes to set.
- * \param erase Whether to erase before writing: \c TRUE or \c FALSE.
- *
- * \return The value of \a dst.
- *
- * \warning This function may be called with \a erase set to \c FALSE only if
- *          the destination consists only of erased words, i.e. this function
- *          can not be used to write only one bit of a previously written word.
- *          E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the
- *          resulting value in flash may be different from \c 0x00000000.
- *
- * \warning A Lock Error is issued if the command is applied to pages belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern volatile void *flashc_memset8(volatile void *dst, U8 src, size_t nbytes, Bool erase);
-
-/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst
- *         from the repeated \a src big-endian source half-word.
- *
- * The destination areas that are not within the flash array or the User page
- * are ignored.
- *
- * All pointer and size alignments are supported.
- *
- * \param dst Pointer to flash destination.
- * \param src Source half-word.
- * \param nbytes Number of bytes to set.
- * \param erase Whether to erase before writing: \c TRUE or \c FALSE.
- *
- * \return The value of \a dst.
- *
- * \warning This function may be called with \a erase set to \c FALSE only if
- *          the destination consists only of erased words, i.e. this function
- *          can not be used to write only one bit of a previously written word.
- *          E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the
- *          resulting value in flash may be different from \c 0x00000000.
- *
- * \warning A Lock Error is issued if the command is applied to pages belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern volatile void *flashc_memset16(volatile void *dst, U16 src, size_t nbytes, Bool erase);
-
-/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst
- *         from the repeated \a src big-endian source word.
- *
- * The destination areas that are not within the flash array or the User page
- * are ignored.
- *
- * All pointer and size alignments are supported.
- *
- * \param dst Pointer to flash destination.
- * \param src Source word.
- * \param nbytes Number of bytes to set.
- * \param erase Whether to erase before writing: \c TRUE or \c FALSE.
- *
- * \return The value of \a dst.
- *
- * \warning This function may be called with \a erase set to \c FALSE only if
- *          the destination consists only of erased words, i.e. this function
- *          can not be used to write only one bit of a previously written word.
- *          E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the
- *          resulting value in flash may be different from \c 0x00000000.
- *
- * \warning A Lock Error is issued if the command is applied to pages belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern volatile void *flashc_memset32(volatile void *dst, U32 src, size_t nbytes, Bool erase);
-
-/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst
- *         from the repeated \a src big-endian source double-word.
- *
- * The destination areas that are not within the flash array or the User page
- * are ignored.
- *
- * All pointer and size alignments are supported.
- *
- * \param dst Pointer to flash destination.
- * \param src Source double-word.
- * \param nbytes Number of bytes to set.
- * \param erase Whether to erase before writing: \c TRUE or \c FALSE.
- *
- * \return The value of \a dst.
- *
- * \warning This function may be called with \a erase set to \c FALSE only if
- *          the destination consists only of erased words, i.e. this function
- *          can not be used to write only one bit of a previously written word.
- *          E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the
- *          resulting value in flash may be different from \c 0x00000000.
- *
- * \warning A Lock Error is issued if the command is applied to pages belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern volatile void *flashc_memset64(volatile void *dst, U64 src, size_t nbytes, Bool erase);
-
-/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst
- *         from the repeated \a src big-endian source pattern.
- *
- * The destination areas that are not within the flash array or the User page
- * are ignored.
- *
- * All pointer and size alignments are supported.
- *
- * \param dst Pointer to flash destination.
- * \param src Source double-word.
- * \param src_width \a src width in bits: 8, 16, 32 or 64.
- * \param nbytes Number of bytes to set.
- * \param erase Whether to erase before writing: \c TRUE or \c FALSE.
- *
- * \return The value of \a dst.
- *
- * \warning This function may be called with \a erase set to \c FALSE only if
- *          the destination consists only of erased words, i.e. this function
- *          can not be used to write only one bit of a previously written word.
- *          E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the
- *          resulting value in flash may be different from \c 0x00000000.
- *
- * \warning A Lock Error is issued if the command is applied to pages belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-#define flashc_memset(dst, src, src_width, nbytes, erase) \
-          TPASTE2(flashc_memset, src_width)((dst), (src), (nbytes), (erase))
-
-/*! \brief Copies \a nbytes bytes to the flash destination pointed to by \a dst
- *         from the source pointed to by \a src.
- *
- * The destination areas that are not within the flash array or the User page
- * are ignored.
- *
- * All pointer and size alignments are supported.
- *
- * \param dst Pointer to flash destination.
- * \param src Pointer to source data.
- * \param nbytes Number of bytes to copy.
- * \param erase Whether to erase before writing: \c TRUE or \c FALSE.
- *
- * \return The value of \a dst.
- *
- * \warning If copying takes place between areas that overlap, the behavior is
- *          undefined.
- *
- * \warning This function may be called with \a erase set to \c FALSE only if
- *          the destination consists only of erased words, i.e. this function
- *          can not be used to write only one bit of a previously written word.
- *          E.g., if \c 0x00000001 then \c 0xFFFFFFFE are written to a word, the
- *          resulting value in flash may be different from \c 0x00000000.
- *
- * \warning A Lock Error is issued if the command is applied to pages belonging
- *          to a locked region or to the bootloader protected area.
- *
- * \note The FLASHC error status returned by \ref flashc_is_lock_error and
- *       \ref flashc_is_programming_error is updated.
- */
-extern volatile void *flashc_memcpy(volatile void *dst, const void *src, size_t nbytes, Bool erase);
-
-#if UC3C
-
-/*! \brief Depednding to the CPU frequency, set the wait states of flash read
- *         accesses and enable or disable the High speed read mode.
- *
- * \param cpu_f_hz The CPU frequency
- */
-void flashc_set_flash_waitstate_and_readmode(unsigned long cpu_f_hz);
-#endif // UC3C device-specific implementation
-
-//! @}
-
-
-#endif  // _FLASHC_H_