Merged upstream arduino branch

4 files changed, 1339 insertions, 0 deletions

diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx.c b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx.c
new file mode 100644
index 0000000..d4b1b73
--- /dev/null
+++ b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx.c
@@ -0,0 +1,672 @@
+/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*This file is prepared for Doxygen automatic documentation generation.*/
+/*! \file *********************************************************************
+ *
+ * \brief Management of the AT45DBX data flash controller through SPI.
+ *
+ * This file manages the accesses to the AT45DBX data flash components.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 devices with an SPI module can be used.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ ******************************************************************************/
+
+/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an Atmel
+ * AVR product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+ *
+ */
+
+//_____  I N C L U D E S ___________________________________________________
+
+#include "conf_access.h"
+
+
+#if AT45DBX_MEM == ENABLE
+
+#include "compiler.h"
+#include "board.h"
+#include "gpio.h"
+#include "spi.h"
+#include "conf_at45dbx.h"
+#include "at45dbx.h"
+#include "printf-stdarg.h"
+
+#if AT45DBX_MEM_CNT > 4
+  #error AT45DBX_MEM_CNT must not exceed 4
+#endif
+
+
+//_____ D E F I N I T I O N S ______________________________________________
+
+/*! \name AT45DBX Group A Commands
+ */
+//! @{
+#define AT45DBX_CMDA_RD_PAGE              0xD2        //!< Main Memory Page Read (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_ARRAY_LEG         0xE8        //!< Continuous Array Read, Legacy Command (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_ARRAY_LF_SM       0x03        //!< Continuous Array Read, Low-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDA_RD_ARRAY_AF_SM       0x0B        //!< Continuous Array Read, Any-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDA_RD_SECTOR_PROT_REG   0x32        //!< Read Sector Protection Register (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_SECTOR_LKDN_REG   0x35        //!< Read Sector Lockdown Register (Serial/8-bit Mode).
+#define AT45DBX_CMDA_RD_SECURITY_REG      0x77        //!< Read Security Register (Serial/8-bit Mode).
+//! @}
+
+/*! \name AT45DBX Group B Commands
+ */
+//! @{
+#define AT45DBX_CMDB_ER_PAGE              0x81        //!< Page Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_ER_BLOCK             0x50        //!< Block Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_ER_SECTOR            0x7C        //!< Sector Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_ER_CHIP              0xC794809A  //!< Chip Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_XFR_PAGE_TO_BUF1     0x53        //!< Main Memory Page to Buffer 1 Transfer (Serial/8-bit Mode).
+#define AT45DBX_CMDB_XFR_PAGE_TO_BUF2     0x55        //!< Main Memory Page to Buffer 2 Transfer (Serial/8-bit Mode).
+#define AT45DBX_CMDB_CMP_PAGE_TO_BUF1     0x60        //!< Main Memory Page to Buffer 1 Compare (Serial/8-bit Mode).
+#define AT45DBX_CMDB_CMP_PAGE_TO_BUF2     0x61        //!< Main Memory Page to Buffer 2 Compare (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF1_TO_PAGE_ER   0x83        //!< Buffer 1 to Main Memory Page Program with Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF2_TO_PAGE_ER   0x86        //!< Buffer 2 to Main Memory Page Program with Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF1_TO_PAGE      0x88        //!< Buffer 1 to Main Memory Page Program without Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_BUF2_TO_PAGE      0x89        //!< Buffer 2 to Main Memory Page Program without Built-in Erase (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_PAGE_TH_BUF1      0x82        //!< Main Memory Page Program through Buffer 1 (Serial/8-bit Mode).
+#define AT45DBX_CMDB_PR_PAGE_TH_BUF2      0x85        //!< Main Memory Page Program through Buffer 2 (Serial/8-bit Mode).
+#define AT45DBX_CMDB_RWR_PAGE_TH_BUF1     0x58        //!< Auto Page Rewrite through Buffer 1 (Serial/8-bit Mode).
+#define AT45DBX_CMDB_RWR_PAGE_TH_BUF2     0x59        //!< Auto Page Rewrite through Buffer 2 (Serial/8-bit Mode).
+//! @}
+
+/*! \name AT45DBX Group C Commands
+ */
+//! @{
+#define AT45DBX_CMDC_RD_BUF1_LF_SM        0xD1        //!< Buffer 1 Read, Low-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF2_LF_SM        0xD3        //!< Buffer 2 Read, Low-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF1_AF_SM        0xD4        //!< Buffer 1 Read, Any-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF2_AF_SM        0xD6        //!< Buffer 2 Read, Any-Frequency Mode (Serial Mode).
+#define AT45DBX_CMDC_RD_BUF1_AF_8M        0x54        //!< Buffer 1 Read, Any-Frequency Mode (8-bit Mode).
+#define AT45DBX_CMDC_RD_BUF2_AF_8M        0x56        //!< Buffer 2 Read, Any-Frequency Mode (8-bit Mode).
+#define AT45DBX_CMDC_WR_BUF1              0x84        //!< Buffer 1 Write (Serial/8-bit Mode).
+#define AT45DBX_CMDC_WR_BUF2              0x87        //!< Buffer 2 Write (Serial/8-bit Mode).
+#define AT45DBX_CMDC_RD_STATUS_REG        0xD7        //!< Status Register Read (Serial/8-bit Mode).
+#define AT45DBX_CMDC_RD_MNFCT_DEV_ID_SM   0x9F        //!< Manufacturer and Device ID Read (Serial Mode).
+//! @}
+
+/*! \name AT45DBX Group D Commands
+ */
+//! @{
+#define AT45DBX_CMDD_EN_SECTOR_PROT       0x3D2A7FA9  //!< Enable Sector Protection (Serial/8-bit Mode).
+#define AT45DBX_CMDD_DIS_SECTOR_PROT      0x3D2A7F9A  //!< Disable Sector Protection (Serial/8-bit Mode).
+#define AT45DBX_CMDD_ER_SECTOR_PROT_REG   0x3D2A7FCF  //!< Erase Sector Protection Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_PR_SECTOR_PROT_REG   0x3D2A7FFC  //!< Program Sector Protection Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_LKDN_SECTOR          0x3D2A7F30  //!< Sector Lockdown (Serial/8-bit Mode).
+#define AT45DBX_CMDD_PR_SECURITY_REG      0x9B000000  //!< Program Security Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_PR_CONF_REG          0x3D2A80A6  //!< Program Configuration Register (Serial/8-bit Mode).
+#define AT45DBX_CMDD_DEEP_PWR_DN          0xB9        //!< Deep Power-down (Serial/8-bit Mode).
+#define AT45DBX_CMDD_RSM_DEEP_PWR_DN      0xAB        //!< Resume from Deep Power-down (Serial/8-bit Mode).
+//! @}
+
+
+/*! \name Bit-Masks and Values for the Status Register
+ */
+//! @{
+#define AT45DBX_MSK_BUSY                  0x80        //!< Busy status bit-mask.
+#define AT45DBX_BUSY                      0x00        //!< Busy status value (0x00 when busy, 0x80 when ready).
+#define AT45DBX_MSK_DENSITY               0x3C        //!< Device density bit-mask.
+//! @}
+#if AT45DBX_MEM_SIZE == AT45DBX_1MB
+
+/*! \name AT45DB081 Memories
+ */
+//! @{
+#define AT45DB021D_DENSITY                0x14        //!< Device density value.
+#define AT45DBX_DENSITY                   0x24        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS             9          //!< Address bits for byte position within buffer.
+
+//! @}
+#elif AT45DBX_MEM_SIZE == AT45DBX_2MB
+/*! \name AT45DB021D Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x21        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            	10        //!< Address bits for byte position within buffer.
+
+//! @}
+#if 0
+/*! \name AT45DB161 Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x2C        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            	10        //!< Address bits for byte position within buffer.
+
+//! @}
+#endif
+
+#elif AT45DBX_MEM_SIZE == AT45DBX_4MB
+
+/*! \name AT45DB321 Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x34        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            10          //!< Address bits for byte position within buffer.
+
+//! @}
+
+#elif AT45DBX_MEM_SIZE == AT45DBX_8MB
+
+/*! \name AT45DB642 Memories
+ */
+//! @{
+#define AT45DBX_DENSITY                   0x3C        //!< Device density value.
+#define AT45DBX_BYTE_ADDR_BITS            11          //!< Address bits for byte position within buffer.
+
+
+//! @}
+
+#else
+  #error AT45DBX_MEM_SIZE is not defined to a supported value
+#endif
+
+
+
+//! Address bits for page selection.
+#define AT45DBX_PAGE_ADDR_BITS            (AT45DBX_MEM_SIZE - AT45DBX_PAGE_BITS)
+
+//! Number of bits for addresses within pages.
+#define AT45DBX_PAGE_BITS                 (AT45DBX_BYTE_ADDR_BITS - 1)
+
+//! Page size in bytes.
+#define AT45DBX_PAGE_SIZE                 (1 << AT45DBX_PAGE_BITS)
+
+//! Bit-mask for byte position within buffer in \ref gl_ptr_mem.
+#define AT45DBX_MSK_PTR_BYTE              ((1 << AT45DBX_PAGE_BITS) - 1)
+
+//! Bit-mask for page selection in \ref gl_ptr_mem.
+#define AT45DBX_MSK_PTR_PAGE              (((1 << AT45DBX_PAGE_ADDR_BITS) - 1) << AT45DBX_PAGE_BITS)
+
+//! Bit-mask for byte position within sector in \ref gl_ptr_mem.
+#define AT45DBX_MSK_PTR_SECTOR            ((1 << AT45DBX_SECTOR_BITS) - 1)
+
+
+/*! \brief Sends a dummy byte through SPI.
+ */
+#define spi_write_dummy()                 spi_write(AT45DBX_SPI, 0xFF)
+
+
+//! Boolean indicating whether memory is in busy state.
+static Bool at45dbx_busy;
+
+//! Memory data pointer.
+static U32 gl_ptr_mem;
+
+//! Sector buffer.
+static U8 sector_buf[AT45DBX_SECTOR_SIZE];
+
+
+/*! \name Control Functions
+ */
+//! @{
+
+
+Bool at45dbx_init(spi_options_t spiOptions, unsigned int pba_hz)
+{
+  // Setup SPI registers according to spiOptions.
+  for (spiOptions.reg = AT45DBX_SPI_FIRST_NPCS;
+       spiOptions.reg < AT45DBX_SPI_FIRST_NPCS + AT45DBX_MEM_CNT;
+       spiOptions.reg++)
+  {
+    if (spi_setupChipReg(AT45DBX_SPI, &spiOptions, pba_hz) != SPI_OK) return KO;
+  }
+
+  // Memory ready.
+  at45dbx_busy = FALSE;
+
+  return OK;
+}
+
+
+/*! \brief Selects or unselects a DF memory.
+ *
+ * \param memidx  Memory ID of DF to select or unselect.
+ * \param bSelect Boolean indicating whether the DF memory has to be selected.
+ */
+static void at45dbx_chipselect_df(U8 memidx, Bool bSelect)
+{
+  if (bSelect)
+  {
+    // Select SPI chip.
+    spi_selectChip(AT45DBX_SPI, AT45DBX_SPI_FIRST_NPCS + memidx);
+  }
+  else
+  {
+    // Unselect SPI chip.
+    spi_unselectChip(AT45DBX_SPI, AT45DBX_SPI_FIRST_NPCS + memidx);
+  }
+}
+
+
+Bool at45dbx_mem_check(void)
+{
+  U8 df;
+  U16 status = 0;
+
+  // DF memory check.
+  for (df = 0; df < AT45DBX_MEM_CNT; df++)
+  {
+    // Select the DF memory to check.
+    at45dbx_chipselect_df(df, TRUE);
+
+    // Send the Status Register Read command.
+    spi_write(AT45DBX_SPI, AT45DBX_CMDC_RD_STATUS_REG);
+
+    // Send a dummy byte to read the status register.
+    spi_write_dummy();
+    spi_read(AT45DBX_SPI, &status);
+
+    // Unselect the checked DF memory.
+    at45dbx_chipselect_df(df, FALSE);
+
+    // Unexpected device density value.
+    if ((status & AT45DBX_MSK_DENSITY) < AT45DB021D_DENSITY)
+    {
+    	printk("Unexpected device density value: %d (0x%x)\n", (status & AT45DBX_MSK_DENSITY), status);
+    	return KO;
+    }
+  }
+
+  return OK;
+}
+
+
+/*! \brief Waits until the DF is ready.
+ */
+static void at45dbx_wait_ready(void)
+{
+  U16 status;
+
+  // Select the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, TRUE);
+
+  // Send the Status Register Read command.
+  spi_write(AT45DBX_SPI, AT45DBX_CMDC_RD_STATUS_REG);
+
+  // Read the status register until the DF is ready.
+  do
+  {
+    // Send a dummy byte to read the status register.
+    spi_write_dummy();
+    spi_read(AT45DBX_SPI, &status);
+  } while ((status & AT45DBX_MSK_BUSY) == AT45DBX_BUSY);
+
+  // Unselect the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+}
+
+
+Bool at45dbx_read_open(U32 sector)
+{
+  U32 addr;
+
+  // Set the global memory pointer to a byte address.
+  gl_ptr_mem = sector << AT45DBX_SECTOR_BITS; // gl_ptr_mem = sector * AT45DBX_SECTOR_SIZE.
+
+  // If the DF memory is busy, wait until it's ready.
+  if (at45dbx_busy) at45dbx_wait_ready();
+  at45dbx_busy = FALSE;
+
+  // Select the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, TRUE);
+
+  // Initiate a page read at a given sector.
+
+  // Send the Main Memory Page Read command.
+  spi_write(AT45DBX_SPI, AT45DBX_CMDA_RD_PAGE);
+
+  // Send the three address bytes, which comprise:
+  //  - (24 - (AT45DBX_PAGE_ADDR_BITS + AT45DBX_BYTE_ADDR_BITS)) reserved bits;
+  //  - then AT45DBX_PAGE_ADDR_BITS bits specifying the page in main memory to be read;
+  //  - then AT45DBX_BYTE_ADDR_BITS bits specifying the starting byte address within that page.
+  // NOTE: The bits of gl_ptr_mem above the AT45DBX_MEM_SIZE bits are useless for the local
+  // DF addressing. They are used for DF discrimination when there are several DFs.
+  addr = (Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_PAGE) << AT45DBX_BYTE_ADDR_BITS) |
+         Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_BYTE);
+  spi_write(AT45DBX_SPI, LSB2W(addr));
+  spi_write(AT45DBX_SPI, LSB1W(addr));
+  spi_write(AT45DBX_SPI, LSB0W(addr));
+
+  // Send 32 don't care clock cycles to initialize the read operation.
+  spi_write_dummy();
+  spi_write_dummy();
+  spi_write_dummy();
+  spi_write_dummy();
+
+  return OK;
+}
+
+
+void at45dbx_read_close(void)
+{
+  // Unselect the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+
+  // Memory ready.
+  at45dbx_busy = FALSE;
+}
+
+
+Bool at45dbx_write_open(U32 sector)
+{
+  U32 addr;
+
+  // Set the global memory pointer to a byte address.
+  gl_ptr_mem = sector << AT45DBX_SECTOR_BITS; // gl_ptr_mem = sector * AT45DBX_SECTOR_SIZE.
+
+  // If the DF memory is busy, wait until it's ready.
+  if (at45dbx_busy) at45dbx_wait_ready();
+  at45dbx_busy = FALSE;
+
+#if AT45DBX_PAGE_SIZE > AT45DBX_SECTOR_SIZE
+  // Select the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, TRUE);
+
+  // Transfer the content of the current page to buffer 1.
+
+  // Send the Main Memory Page to Buffer 1 Transfer command.
+  spi_write(AT45DBX_SPI, AT45DBX_CMDB_XFR_PAGE_TO_BUF1);
+
+  // Send the three address bytes, which comprise:
+  //  - (24 - (AT45DBX_PAGE_ADDR_BITS + AT45DBX_BYTE_ADDR_BITS)) reserved bits;
+  //  - then AT45DBX_PAGE_ADDR_BITS bits specifying the page in main memory to be read;
+  //  - then AT45DBX_BYTE_ADDR_BITS don't care bits.
+  // NOTE: The bits of gl_ptr_mem above the AT45DBX_MEM_SIZE bits are useless for the local
+  // DF addressing. They are used for DF discrimination when there are several DFs.
+  addr = Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_PAGE) << AT45DBX_BYTE_ADDR_BITS;
+  spi_write(AT45DBX_SPI, LSB2W(addr));
+  spi_write(AT45DBX_SPI, LSB1W(addr));
+  spi_write(AT45DBX_SPI, LSB0W(addr));
+
+  // Unselect the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+
+  // Wait for end of page transfer.
+  at45dbx_wait_ready();
+#endif
+
+  // Select the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, TRUE);
+
+  // Initiate a page write at a given sector.
+
+  // Send the Main Memory Page Program through Buffer 1 command.
+  spi_write(AT45DBX_SPI, AT45DBX_CMDB_PR_PAGE_TH_BUF1);
+
+  // Send the three address bytes, which comprise:
+  //  - (24 - (AT45DBX_PAGE_ADDR_BITS + AT45DBX_BYTE_ADDR_BITS)) reserved bits;
+  //  - then AT45DBX_PAGE_ADDR_BITS bits specifying the page in main memory to be written;
+  //  - then AT45DBX_BYTE_ADDR_BITS bits specifying the starting byte address within that page.
+  // NOTE: The bits of gl_ptr_mem above the AT45DBX_MEM_SIZE bits are useless for the local
+  // DF addressing. They are used for DF discrimination when there are several DFs.
+  addr = (Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_PAGE) << AT45DBX_BYTE_ADDR_BITS) |
+         Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_BYTE);
+  spi_write(AT45DBX_SPI, LSB2W(addr));
+  spi_write(AT45DBX_SPI, LSB1W(addr));
+  spi_write(AT45DBX_SPI, LSB0W(addr));
+
+  return OK;
+}
+
+
+void at45dbx_write_close(void)
+{
+  // While end of logical sector not reached, zero-fill remaining memory bytes.
+  while (Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_SECTOR))
+  {
+    spi_write(AT45DBX_SPI, 0x00);
+    gl_ptr_mem++;
+  }
+
+  // Unselect the DF memory gl_ptr_mem points to.
+  at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+
+  // Memory busy.
+  at45dbx_busy = TRUE;
+}
+
+
+//! @}
+
+
+/*! \name Single-Byte Access Functions
+ */
+//! @{
+
+
+U8 at45dbx_read_byte(void)
+{
+  U16 data;
+
+  // Memory busy.
+  if (at45dbx_busy)
+  {
+    // Being here, we know that we previously finished a page read.
+    // => We have to access the next page.
+
+    // Memory ready.
+    at45dbx_busy = FALSE;
+
+    // Eventually select the next DF and open the next page.
+    // NOTE: at45dbx_read_open input parameter is a sector.
+    at45dbx_read_open(gl_ptr_mem >> AT45DBX_SECTOR_BITS); // gl_ptr_mem / AT45DBX_SECTOR_SIZE.
+  }
+
+  // Send a dummy byte to read the next data byte.
+  spi_write_dummy();
+  spi_read(AT45DBX_SPI, &data);
+  gl_ptr_mem++;
+
+  // If end of page reached,
+  if (!Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_BYTE))
+  {
+    // unselect the DF memory gl_ptr_mem points to.
+    at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+
+    // Memory busy.
+    at45dbx_busy = TRUE;
+  }
+
+  return data;
+}
+
+
+Bool at45dbx_write_byte(U8 b)
+{
+  // Memory busy.
+  if (at45dbx_busy)
+  {
+    // Being here, we know that we previously launched a page programming.
+    // => We have to access the next page.
+
+    // Eventually select the next DF and open the next page.
+    // NOTE: at45dbx_write_open input parameter is a sector.
+    at45dbx_write_open(gl_ptr_mem >> AT45DBX_SECTOR_BITS); // gl_ptr_mem / AT45DBX_SECTOR_SIZE.
+  }
+
+  // Write the next data byte.
+  spi_write(AT45DBX_SPI, b);
+  gl_ptr_mem++;
+
+  // If end of page reached,
+  if (!Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_BYTE))
+  {
+    // unselect the DF memory gl_ptr_mem points to in order to program the page.
+    at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+
+    // Memory busy.
+    at45dbx_busy = TRUE;
+  }
+
+  return OK;
+}
+
+
+//! @}
+
+
+/*! \name Multiple-Sector Access Functions
+ */
+//! @{
+
+
+Bool at45dbx_read_multiple_sector(U16 nb_sector)
+{
+  while (nb_sector--)
+  {
+    // Read the next sector.
+    at45dbx_read_sector_2_ram(sector_buf);
+    at45dbx_read_multiple_sector_callback(sector_buf);
+  }
+
+  return OK;
+}
+
+
+Bool at45dbx_write_multiple_sector(U16 nb_sector)
+{
+  while (nb_sector--)
+  {
+    // Write the next sector.
+    at45dbx_write_multiple_sector_callback(sector_buf);
+    at45dbx_write_sector_from_ram(sector_buf);
+  }
+
+  return OK;
+}
+
+
+//! @}
+
+
+/*! \name Single-Sector Access Functions
+ */
+//! @{
+
+
+Bool at45dbx_read_sector_2_ram(void *ram)
+{
+  U8 *_ram = ram;
+  U16 i;
+  U16 data;
+
+  // Memory busy.
+  if (at45dbx_busy)
+  {
+    // Being here, we know that we previously finished a page read.
+    // => We have to access the next page.
+
+    // Memory ready.
+    at45dbx_busy = FALSE;
+
+    // Eventually select the next DF and open the next page.
+    // NOTE: at45dbx_read_open input parameter is a sector.
+    at45dbx_read_open(gl_ptr_mem >> AT45DBX_SECTOR_BITS); // gl_ptr_mem / AT45DBX_SECTOR_SIZE.
+  }
+
+  // Read the next sector.
+  for (i = AT45DBX_SECTOR_SIZE; i; i--)
+  {
+    // Send a dummy byte to read the next data byte.
+    spi_write_dummy();
+    spi_read(AT45DBX_SPI, &data);
+    *_ram++ = data;
+  }
+
+  // Update the memory pointer.
+  gl_ptr_mem += AT45DBX_SECTOR_SIZE;
+
+#if AT45DBX_PAGE_SIZE > AT45DBX_SECTOR_SIZE
+  // If end of page reached,
+  if (!Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_BYTE))
+#endif
+  {
+    // unselect the DF memory gl_ptr_mem points to.
+    at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+
+    // Memory busy.
+    at45dbx_busy = TRUE;
+  }
+
+  return OK;
+}
+
+
+Bool at45dbx_write_sector_from_ram(const void *ram)
+{
+  const U8 *_ram = ram;
+  U16 i;
+
+  // Memory busy.
+  if (at45dbx_busy)
+  {
+    // Being here, we know that we previously launched a page programming.
+    // => We have to access the next page.
+
+    // Eventually select the next DF and open the next page.
+    // NOTE: at45dbx_write_open input parameter is a sector.
+    at45dbx_write_open(gl_ptr_mem >> AT45DBX_SECTOR_BITS); // gl_ptr_mem / AT45DBX_SECTOR_SIZE.
+  }
+
+  // Write the next sector.
+  for (i = AT45DBX_SECTOR_SIZE; i; i--)
+  {
+    // Write the next data byte.
+    spi_write(AT45DBX_SPI, *_ram++);
+  }
+
+  // Update the memory pointer.
+  gl_ptr_mem += AT45DBX_SECTOR_SIZE;
+
+#if AT45DBX_PAGE_SIZE > AT45DBX_SECTOR_SIZE
+  // If end of page reached,
+  if (!Rd_bitfield(gl_ptr_mem, AT45DBX_MSK_PTR_BYTE))
+#endif
+  {
+    // unselect the DF memory gl_ptr_mem points to in order to program the page.
+    at45dbx_chipselect_df(gl_ptr_mem >> AT45DBX_MEM_SIZE, FALSE);
+
+    // Memory busy.
+    at45dbx_busy = TRUE;
+  }
+
+  return OK;
+}
+
+
+//! @}
+
+
+#endif  // AT45DBX_MEM == ENABLE
diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx.h b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx.h
new file mode 100644
index 0000000..5816b61
--- /dev/null
+++ b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx.h
@@ -0,0 +1,269 @@
+/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*This file is prepared for Doxygen automatic documentation generation.*/
+/*! \file *********************************************************************
+ *
+ * \brief Management of the AT45DBX data flash controller through SPI.
+ *
+ * This file manages the accesses to the AT45DBX data flash components.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 devices with an SPI module can be used.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ ******************************************************************************/
+
+/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an Atmel
+ * AVR product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+ *
+ */
+
+#ifndef _AT45DBX_H_
+#define _AT45DBX_H_
+
+
+#include "conf_access.h"
+
+#if AT45DBX_MEM == DISABLE
+  #error at45dbx.h is #included although AT45DBX_MEM is disabled
+#endif
+
+
+#include "spi.h"
+
+
+//_____ D E F I N I T I O N S ______________________________________________
+
+/*! \name Available AT45DBX Sizes
+ *
+ * Number of address bits of available AT45DBX data flash memories.
+ *
+ * \note Only memories with page sizes of at least 512 bytes (sector size) are
+ *       supported.
+ */
+//! @{
+#define AT45DBX_1MB             20
+#define AT45DBX_2MB             21
+#define AT45DBX_4MB             22
+#define AT45DBX_8MB             23
+//! @}
+
+// AT45DBX_1MB
+#define AT45DBX_SECTOR_BITS     			8		  //! Number of bits for addresses within sectors.
+// AT45DBX_2MB AT45DBX_4MB AT45DBX_8MB
+//#define AT45DBX_SECTOR_BITS     			9		  //! Number of bits for addresses within sectors.
+
+//! Sector size in bytes.
+#define AT45DBX_SECTOR_SIZE     (1 << AT45DBX_SECTOR_BITS)
+
+//_____ D E C L A R A T I O N S ____________________________________________
+
+/*! \name Control Functions
+ */
+//! @{
+
+/*! \brief Initializes the data flash controller and the SPI channel by which
+ *         the DF is controlled.
+ *
+ * \param spiOptions  Initialization options of the DF SPI channel.
+ * \param pba_hz      SPI module input clock frequency (PBA clock, Hz).
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ */
+extern Bool at45dbx_init(spi_options_t spiOptions, unsigned int pba_hz);
+
+/*! \brief Performs a memory check on all DFs.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ */
+extern Bool at45dbx_mem_check(void);
+
+/*! \brief Opens a DF memory in read mode at a given sector.
+ *
+ * \param sector  Start sector.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ *
+ * \note Sector may be page-unaligned (depending on the DF page size).
+ */
+extern Bool at45dbx_read_open(U32 sector);
+
+/*! \brief Unselects the current DF memory.
+ */
+extern void at45dbx_read_close(void);
+
+/*! \brief This function opens a DF memory in write mode at a given sector.
+ *
+ * \param sector  Start sector.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ *
+ * \note Sector may be page-unaligned (depending on the DF page size).
+ *
+ * \note If \ref AT45DBX_PAGE_SIZE > \ref AT45DBX_SECTOR_SIZE, page content is
+ *       first loaded in buffer to then be partially updated by write byte or
+ *       write sector functions.
+ */
+extern Bool at45dbx_write_open(U32 sector);
+
+/*! \brief Fills the end of the current logical sector and launches page programming.
+ */
+extern void at45dbx_write_close(void);
+
+//! @}
+
+
+/*! \name Single-Byte Access Functions
+ */
+//! @{
+
+/*! \brief Performs a single byte read from DF memory.
+ *
+ * \return The read byte.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_read_open
+ *       function.
+ */
+extern U8 at45dbx_read_byte(void);
+
+/*! \brief Performs a single byte write to DF memory.
+ *
+ * \param b The byte to write.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_write_open
+ *       function.
+ */
+extern Bool at45dbx_write_byte(U8 b);
+
+//! @}
+
+
+/*! \name Multiple-Sector Access Functions
+ */
+//! @{
+
+/*! \brief Reads \a nb_sector sectors from DF memory.
+ *
+ * Data flow is: DF -> callback.
+ *
+ * \param nb_sector Number of contiguous sectors to read.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_read_open
+ *       function.
+ *
+ * \note As \ref AT45DBX_PAGE_SIZE is always a multiple of
+ *       \ref AT45DBX_SECTOR_SIZE, there is no need to check page end for each
+ *       byte.
+ */
+extern Bool at45dbx_read_multiple_sector(U16 nb_sector);
+
+/*! \brief Callback function invoked after each sector read during
+ *         \ref at45dbx_read_multiple_sector.
+ *
+ * \param psector Pointer to read sector.
+ */
+extern void at45dbx_read_multiple_sector_callback(const void *psector);
+
+/*! \brief Writes \a nb_sector sectors to DF memory.
+ *
+ * Data flow is: callback -> DF.
+ *
+ * \param nb_sector Number of contiguous sectors to write.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_write_open
+ *       function.
+ *
+ * \note As \ref AT45DBX_PAGE_SIZE is always a multiple of
+ *       \ref AT45DBX_SECTOR_SIZE, there is no need to check page end for each
+ *       byte.
+ */
+extern Bool at45dbx_write_multiple_sector(U16 nb_sector);
+
+/*! \brief Callback function invoked before each sector write during
+ *         \ref at45dbx_write_multiple_sector.
+ *
+ * \param psector Pointer to sector to write.
+ */
+extern void at45dbx_write_multiple_sector_callback(void *psector);
+
+//! @}
+
+
+/*! \name Single-Sector Access Functions
+ */
+//! @{
+
+/*! \brief Reads 1 DF sector to a RAM buffer.
+ *
+ * Data flow is: DF -> RAM.
+ *
+ * \param ram Pointer to RAM buffer.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_read_open
+ *       function.
+ */
+extern Bool at45dbx_read_sector_2_ram(void *ram);
+
+/*! \brief Writes 1 DF sector from a RAM buffer.
+ *
+ * Data flow is: RAM -> DF.
+ *
+ * \param ram Pointer to RAM buffer.
+ *
+ * \retval OK Success.
+ * \retval KO Failure.
+ *
+ * \note First call must be preceded by a call to the \ref at45dbx_write_open
+ *       function.
+ */
+extern Bool at45dbx_write_sector_from_ram(const void *ram);
+
+//! @}
+
+
+#endif  // _AT45DBX_H_
diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx_mem.c b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx_mem.c
new file mode 100644
index 0000000..4c0ace2
--- /dev/null
+++ b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx_mem.c
@@ -0,0 +1,234 @@
+/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*This file is prepared for Doxygen automatic documentation generation.*/
+/*! \file *********************************************************************
+ *
+ * \brief CTRL_ACCESS interface for the AT45DBX data flash controller.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 devices with an SPI module can be used.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ ******************************************************************************/
+
+/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an Atmel
+ * AVR product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+ *
+ */
+
+//_____  I N C L U D E S ___________________________________________________
+
+#include "conf_access.h"
+
+
+#if AT45DBX_MEM == ENABLE
+
+#include "conf_at45dbx.h"
+#include "at45dbx.h"
+#include "at45dbx_mem.h"
+
+
+//_____ D E F I N I T I O N S ______________________________________________
+
+//! Whether to detect write accesses to the memory.
+#define AT45DBX_MEM_TEST_CHANGE_STATE     ENABLED
+
+
+#if (ACCESS_USB == ENABLED || ACCESS_MEM_TO_RAM == ENABLED) && AT45DBX_MEM_TEST_CHANGE_STATE == ENABLED
+
+//! Memory data modified flag.
+static volatile Bool s_b_data_modify = FALSE;
+
+#endif
+
+
+/*! \name Control Interface
+ */
+//! @{
+
+
+Ctrl_status at45dbx_test_unit_ready(void)
+{
+  return (at45dbx_mem_check() == OK) ? CTRL_GOOD : CTRL_NO_PRESENT;
+}
+
+
+Ctrl_status at45dbx_read_capacity(U32 *u32_nb_sector)
+{
+  *u32_nb_sector = (AT45DBX_MEM_CNT << (AT45DBX_MEM_SIZE - AT45DBX_SECTOR_BITS)) - 1;
+
+  return CTRL_GOOD;
+}
+
+
+Bool at45dbx_wr_protect(void)
+{
+  return FALSE;
+}
+
+
+Bool at45dbx_removal(void)
+{
+  return FALSE;
+}
+
+
+//! @}
+
+
+#if ACCESS_USB == ENABLED
+
+#include "usb_drv.h"
+#include "scsi_decoder.h"
+
+
+/*! \name MEM <-> USB Interface
+ */
+//! @{
+
+
+Ctrl_status at45dbx_usb_read_10(U32 addr, U16 nb_sector)
+{
+  if (addr + nb_sector > AT45DBX_MEM_CNT << (AT45DBX_MEM_SIZE - AT45DBX_SECTOR_BITS)) return CTRL_FAIL;
+
+  at45dbx_read_open(addr);
+  at45dbx_read_multiple_sector(nb_sector);
+  at45dbx_read_close();
+
+  return CTRL_GOOD;
+}
+
+
+void at45dbx_read_multiple_sector_callback(const void *psector)
+{
+  U16 data_to_transfer = AT45DBX_SECTOR_SIZE;
+
+  // Transfer read sector to the USB interface.
+  while (data_to_transfer)
+  {
+    while (!Is_usb_in_ready(g_scsi_ep_ms_in))
+    {
+      if(!Is_usb_endpoint_enabled(g_scsi_ep_ms_in))
+         return; // USB Reset
+    }         
+
+    Usb_reset_endpoint_fifo_access(g_scsi_ep_ms_in);
+    data_to_transfer = usb_write_ep_txpacket(g_scsi_ep_ms_in, psector,
+                                             data_to_transfer, &psector);
+    Usb_ack_in_ready_send(g_scsi_ep_ms_in);
+  }
+}
+
+
+Ctrl_status at45dbx_usb_write_10(U32 addr, U16 nb_sector)
+{
+  if (addr + nb_sector > AT45DBX_MEM_CNT << (AT45DBX_MEM_SIZE - AT45DBX_SECTOR_BITS)) return CTRL_FAIL;
+
+#if AT45DBX_MEM_TEST_CHANGE_STATE == ENABLED
+  if (nb_sector) s_b_data_modify = TRUE;
+#endif
+
+  at45dbx_write_open(addr);
+  at45dbx_write_multiple_sector(nb_sector);
+  at45dbx_write_close();
+
+  return CTRL_GOOD;
+}
+
+
+void at45dbx_write_multiple_sector_callback(void *psector)
+{
+  U16 data_to_transfer = AT45DBX_SECTOR_SIZE;
+
+  // Transfer sector to write from the USB interface.
+  while (data_to_transfer)
+  {
+    while (!Is_usb_out_received(g_scsi_ep_ms_out))
+    {
+      if(!Is_usb_endpoint_enabled(g_scsi_ep_ms_out))
+         return; // USB Reset
+    }         
+
+    Usb_reset_endpoint_fifo_access(g_scsi_ep_ms_out);
+    data_to_transfer = usb_read_ep_rxpacket(g_scsi_ep_ms_out, psector,
+                                            data_to_transfer, &psector);
+    Usb_ack_out_received_free(g_scsi_ep_ms_out);
+  }
+}
+
+
+//! @}
+
+#endif  // ACCESS_USB == ENABLED
+
+
+#if ACCESS_MEM_TO_RAM == ENABLED
+
+/*! \name MEM <-> RAM Interface
+ */
+//! @{
+
+
+Ctrl_status at45dbx_df_2_ram(U32 addr, void *ram)
+{
+  if (addr + 1 > AT45DBX_MEM_CNT << (AT45DBX_MEM_SIZE - AT45DBX_SECTOR_BITS)) return CTRL_FAIL;
+
+  at45dbx_read_open(addr);
+  at45dbx_read_sector_2_ram(ram);
+  at45dbx_read_close();
+
+  return CTRL_GOOD;
+}
+
+
+Ctrl_status at45dbx_ram_2_df(U32 addr, const void *ram)
+{
+  if (addr + 1 > AT45DBX_MEM_CNT << (AT45DBX_MEM_SIZE - AT45DBX_SECTOR_BITS)) return CTRL_FAIL;
+
+#if AT45DBX_MEM_TEST_CHANGE_STATE == ENABLED
+  s_b_data_modify = TRUE;
+#endif
+
+  at45dbx_write_open(addr);
+  at45dbx_write_sector_from_ram(ram);
+  at45dbx_write_close();
+
+  return CTRL_GOOD;
+}
+
+
+//! @}
+
+#endif  // ACCESS_MEM_TO_RAM == ENABLED
+
+
+#endif  // AT45DBX_MEM == ENABLE
diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx_mem.h b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx_mem.h
new file mode 100644
index 0000000..de24fa3
--- /dev/null
+++ b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/COMPONENTS/MEMORY/DATA_FLASH/AT45DBX/at45dbx_mem.h
@@ -0,0 +1,164 @@
+/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*This file is prepared for Doxygen automatic documentation generation.*/
+/*! \file *********************************************************************
+ *
+ * \brief CTRL_ACCESS interface for the AT45DBX data flash controller.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 devices with an SPI module can be used.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ ******************************************************************************/
+
+/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an Atmel
+ * AVR product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+ *
+ */
+
+#ifndef _AT45DBX_MEM_H_
+#define _AT45DBX_MEM_H_
+
+
+#include "conf_access.h"
+
+#if AT45DBX_MEM == DISABLE
+  #error at45dbx_mem.h is #included although AT45DBX_MEM is disabled
+#endif
+
+
+#include "ctrl_access.h"
+
+
+//_____ D E C L A R A T I O N S ____________________________________________
+
+/*! \name Control Interface
+ */
+//! @{
+
+/*! \brief Tests the memory state and initializes the memory if required.
+ *
+ * The TEST UNIT READY SCSI primary command allows an application client to poll
+ * a LUN until it is ready without having to allocate memory for returned data.
+ *
+ * This command may be used to check the media status of LUNs with removable
+ * media.
+ *
+ * \return Status.
+ */
+extern Ctrl_status at45dbx_test_unit_ready(void);
+
+/*! \brief Returns the address of the last valid sector in the memory.
+ *
+ * \param u32_nb_sector Pointer to the address of the last valid sector.
+ *
+ * \return Status.
+ */
+extern Ctrl_status at45dbx_read_capacity(U32 *u32_nb_sector);
+
+/*! \brief Returns the write-protection state of the memory.
+ *
+ * \return \c TRUE if the memory is write-protected, else \c FALSE.
+ *
+ * \note Only used by removable memories with hardware-specific write
+ *       protection.
+ */
+extern Bool at45dbx_wr_protect(void);
+
+/*! \brief Tells whether the memory is removable.
+ *
+ * \return \c TRUE if the memory is removable, else \c FALSE.
+ */
+extern Bool at45dbx_removal(void);
+
+//! @}
+
+
+#if ACCESS_USB == ENABLED
+
+/*! \name MEM <-> USB Interface
+ */
+//! @{
+
+/*! \brief Tranfers data from the memory to USB.
+ *
+ * \param addr      Address of first memory sector to read.
+ * \param nb_sector Number of sectors to transfer.
+ *
+ * \return Status.
+ */
+extern Ctrl_status at45dbx_usb_read_10(U32 addr, U16 nb_sector);
+
+/*! \brief Tranfers data from USB to the memory.
+ *
+ * \param addr      Address of first memory sector to write.
+ * \param nb_sector Number of sectors to transfer.
+ *
+ * \return Status.
+ */
+extern Ctrl_status at45dbx_usb_write_10(U32 addr, U16 nb_sector);
+
+//! @}
+
+#endif
+
+
+#if ACCESS_MEM_TO_RAM == ENABLED
+
+/*! \name MEM <-> RAM Interface
+ */
+//! @{
+
+/*! \brief Copies 1 data sector from the memory to RAM.
+ *
+ * \param addr  Address of first memory sector to read.
+ * \param ram   Pointer to RAM buffer to write.
+ *
+ * \return Status.
+ */
+extern Ctrl_status at45dbx_df_2_ram(U32 addr, void *ram);
+
+/*! \brief Copies 1 data sector from RAM to the memory.
+ *
+ * \param addr  Address of first memory sector to write.
+ * \param ram   Pointer to RAM buffer to read.
+ *
+ * \return Status.
+ */
+extern Ctrl_status at45dbx_ram_2_df(U32 addr, const void *ram);
+
+//! @}
+
+#endif
+
+
+#endif  // _AT45DBX_MEM_H_