Delete 'firmwares' folder

1 files changed, 0 insertions, 187 deletions

diff --git a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.h b/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.h
deleted file mode 100644
index 7766b6a..0000000
--- a/firmwares/wifishield/wifi_dnld/src/SOFTWARE_FRAMEWORK/BOARDS/EVK1105/led.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief AT32UC3A EVK1105 board LEDs support package.
- *
- * This file contains definitions and services related to the LED features of
- * the EVK1105 board.
- *
- * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
- * - Supported devices:  All AVR32 AT32UC3A devices can be used.
- * - AppNote:
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#ifndef _LED_H_
-#define _LED_H_
-
-#include "compiler.h"
-
-
-/*! \name Identifiers of LEDs to Use with LED Functions
- */
-//! @{
-#define LED0  0x01
-#define LED1  0x02
-#define LED2  0x04
-#define LED3  0x08
-//! @}
-
-
-/*! \brief Gets the last state of all LEDs set through the LED API.
- *
- * \return State of all LEDs (1 bit per LED).
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U32 LED_Read_Display(void);
-
-/*! \brief Sets the state of all LEDs.
- *
- * \param leds New state of all LEDs (1 bit per LED).
- *
- * \note The pins of all LEDs are set to GPIO output mode.
- */
-extern void LED_Display(U32 leds);
-
-/*! \brief Gets the last state of the specified LEDs set through the LED API.
- *
- * \param mask LEDs of which to get the state (1 bit per LED).
- *
- * \return State of the specified LEDs (1 bit per LED).
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U32 LED_Read_Display_Mask(U32 mask);
-
-/*! \brief Sets the state of the specified LEDs.
- *
- * \param mask LEDs of which to set the state (1 bit per LED).
- *
- * \param leds New state of the specified LEDs (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Display_Mask(U32 mask, U32 leds);
-
-/*! \brief Tests the last state of the specified LEDs set through the LED API.
- *
- * \param leds LEDs of which to test the state (1 bit per LED).
- *
- * \return \c TRUE if at least one of the specified LEDs has a state on, else
- *         \c FALSE.
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern Bool LED_Test(U32 leds);
-
-/*! \brief Turns off the specified LEDs.
- *
- * \param leds LEDs to turn off (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Off(U32 leds);
-
-/*! \brief Turns on the specified LEDs.
- *
- * \param leds LEDs to turn on (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_On(U32 leds);
-
-/*! \brief Toggles the specified LEDs.
- *
- * \param leds LEDs to toggle (1 bit per LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Toggle(U32 leds);
-
-/*! \brief Gets as a bit-field the last state of the specified LEDs set through
- *         the LED API.
- *
- * \param field LEDs of which to get the state (1 bit per LED).
- *
- * \return State of the specified LEDs (1 bit per LED, beginning with the first
- *         specified LED).
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U32 LED_Read_Display_Field(U32 field);
-
-/*! \brief Sets as a bit-field the state of the specified LEDs.
- *
- * \param field LEDs of which to set the state (1 bit per LED).
- * \param leds New state of the specified LEDs (1 bit per LED, beginning with
- *             the first specified LED).
- *
- * \note The pins of the specified LEDs are set to GPIO output mode.
- */
-extern void LED_Display_Field(U32 field, U32 leds);
-
-/*! \brief Gets the intensity of the specified LED.
- *
- * \param led LED of which to get the intensity (1 bit per LED; only the least
- *            significant set bit is used).
- *
- * \return Intensity of the specified LED (0x00 to 0xFF).
- *
- * \warning The PWM channel of the specified LED is supposed to be used only by
- *          this module.
- *
- * \note The GPIO pin configuration of all LEDs is left unchanged.
- */
-extern U8 LED_Get_Intensity(U32 led);
-
-/*! \brief Sets the intensity of the specified LEDs.
- *
- * \param leds LEDs of which to set the intensity (1 bit per LED).
- * \param intensity New intensity of the specified LEDs (0x00 to 0xFF).
- *
- * \warning The PWM channels of the specified LEDs are supposed to be used only
- *          by this module.
- *
- * \note The pins of the specified LEDs are set to PWM output mode.
- */
-extern void LED_Set_Intensity(U32 leds, U8 intensity);
-
-
-#endif  // _LED_H_