Delete 'firmwares' folder

1 files changed, 0 insertions, 454 deletions

diff --git a/firmwares/wifishield/wifiHD/src/main.c b/firmwares/wifishield/wifiHD/src/main.c
deleted file mode 100644
index fffb34e..0000000
--- a/firmwares/wifishield/wifiHD/src/main.c
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * main.c
- *
- *  Created on: May 27, 2010
- *      Author: mlf by Metodo2 srl
- */
-
-//#define _TEST_SPI_
-
-#include <compiler.h>
-#include "board.h"
-#include "gpio.h"
-
-#include <stdint.h>
-#include "wl_api.h"
-#include "wl_cm.h"
-
-#include "lwip/init.h"
-#include "lwip/dhcp.h"
-#include "lwip/dns.h"
-#include "lwip/tcp.h"
-#include "netif/etharp.h"
-#include "netif/wlif.h"
-
-#include "board_init.h"
-#include "trace.h"
-
-#include "timer.h"
-#include "util.h"
-#include "cmd_wl.h"
-#include "ping.h"
-#include "ard_tcp.h"
-#include "spi.h"
-#include "ard_spi.h"
-#include "delay.h"
-#include "tc.h"
-#include "debug.h"
-#include "ard_utils.h"
-#include <lwip_setup.h>
-
-/* FIRMWARE version */
-const char* fwVersion = "1.1.0";
-
-#if BOARD == ARDUINO
-#if !defined(DATAFLASH)
-#include "wl_fw.h"
-
-int fw_download_init(void) { return 0;}
-void fw_download_cb(void* ctx, uint8_t** buf, uint32_t* len)
-{
-	//printk("Fw download not available!\n");
-	/* remember accross different calls */
-        static uint8_t* _fw_buf = (uint8_t*)&fw_buf[0];
-        static uint32_t offset = 0;
-
-        /* when firmware download is completed, this function will be invoked
-         * on additional time with the input value of len set to 0. we can free
-         * the firmware buffer at this time since it's no longer needed.
-         */
-        if (*len == 0) {
-                return;
-        }
-
-        /* decide how much to read. we know *len bytes remains, but we only have
-         * room for SECTOR_SIEZ bytes in our buffer (fw_buf)
-         */
-	uint32_t fw_len = *len;
-
-	*buf = (_fw_buf+offset);
-	*len = fw_len;
-
-        /* we need to know where to start reading upon next call */
-        offset += fw_len;
-
-}
-#else
-#include "fw_download.h"
-#endif
-#endif
-
-bool ifStatus = false;
-bool scanNetCompleted = false;
-
-static bool initSpiComplete = false;
-
-// variable used as enable flag for debug prints
-DEFINE_DEBUG_VARIABLES();
-
-/**
- *
- */
-static void
-wl_cm_scan_cb(void* ctx)
-{
-	INFO_INIT("Scan Completed!\n");
-    scanNetCompleted=true;
-}
-
-/**
- *
- */
-static void
-wl_cm_conn_cb(struct wl_network_t* net, void* ctx)
-{
-	struct ctx_server* hs = ctx;
-
-	LINK_LED_ON();
-
-	INFO_INIT("Connection cb...\n");
-
-	printk("link up, connected to \"%s\"\n", ssid2str(&net->ssid));
-    if ( hs->net_cfg.dhcp_enabled == DYNAMIC_IP_CONFIG ) {
-			INFO_INIT("Start DHCP...\n");
-		    printk("requesting dhcp ... ");
-            int8_t result = dhcp_start(hs->net_cfg.netif);
-            printk((result==ERR_OK)?"OK\n":"FAILED\n");
-            hs->net_cfg.dhcp_running = 1;
-    }
-    else {
-        netif_set_up(hs->net_cfg.netif);
-    }
-
-    INFO_INIT("Start DNS...\n");
-    dns_init();
-}
-
-
-/**
- *
- */
-static void
-wl_cm_disconn_cb(void* ctx)
-{
-	struct ctx_server* hs = ctx;
-
-	LINK_LED_OFF();
-	INFO_INIT("Disconnection cb...\n");
-
-    if (hs->net_cfg.dhcp_running) {
-    	printk("link down, release dhcp\n");
-        dhcp_release(hs->net_cfg.netif);
-        dhcp_stop(hs->net_cfg.netif);
-        hs->net_cfg.dhcp_running = 0;
-     } else {
-    	 printk("link down\n");
-    	 netif_set_down(hs->net_cfg.netif);
-     }
-
-     set_result_cmd(WL_FAILURE);
-}
-
-#if 0
-static void wl_cm_err_cb(void* ctx)
-{
-    int err = *(int*)ctx;
-    WARN("Error: %d\n", err);
-    set_result_cmd(err);
-}
-#endif
-
-/**
- *
- */
-static void
-ip_status_cb(struct netif* netif)
-{
-	INFO_INIT("IP status cb...\n");
-        if (netif_is_up(netif)) {
-            set_result_cmd(WL_SUCCESS);
-            printk("bound to %s\n", ip2str(netif->ip_addr));
-            ifStatus = true;
-        }else{
-        	ifStatus = false;
-        	closeConnections();
-        	WARN("Interface not up!\n");
-        }
-}
-
-
-/**
- *
- */
-void
-led_init(void)
-{
-	gpio_enable_gpio_pin(LED0_GPIO);
-	gpio_enable_gpio_pin(LED1_GPIO);
-	gpio_enable_gpio_pin(LED2_GPIO);
-	LINK_LED_OFF();
-	ERROR_LED_OFF();
-	DATA_LED_OFF();
-}
-
-
-void tc_init(void)
-{
-	  // The timer/counter instance and channel number are used in several functions.
-	  // It's defined as local variable for ease-of-use causes and readability.
-	  volatile avr32_tc_t *tc = WIFI_TC;
-
-	  // Options for waveform genration.
-	  tc_waveform_opt_t waveform_opt =
-	  {
-	    .channel  = WIFI_TC_CHANNEL_ID,        // Channel selection.
-
-	    .bswtrg   = TC_EVT_EFFECT_NOOP,           // Software trigger effect on TIOB.
-	    .beevt    = TC_EVT_EFFECT_NOOP,           // External event effect on TIOB.
-	    .bcpc     = TC_EVT_EFFECT_NOOP,           // RC compare effect on TIOB.
-	    .bcpb     = TC_EVT_EFFECT_NOOP,           // RB compare effect on TIOB.
-
-	    .aswtrg   = TC_EVT_EFFECT_NOOP,           // Software trigger effect on TIOA.
-	    .aeevt    = TC_EVT_EFFECT_NOOP,           // External event effect on TIOA.
-	    .acpc     = TC_EVT_EFFECT_TOGGLE,         // RC compare effect on TIOA: toggle.
-	    .acpa     = TC_EVT_EFFECT_TOGGLE,         // RA compare effect on TIOA: toggle (other possibilities are none, set and clear).
-
-	    .wavsel   = TC_WAVEFORM_SEL_UP_MODE_RC_TRIGGER,// Waveform selection: Up mode with automatic trigger(reset) on RC compare.
-	    .enetrg   = FALSE,                        // External event trigger enable.
-	    .eevt     = TC_EXT_EVENT_SEL_TIOB_INPUT,  // External event selection.
-	    .eevtedg  = TC_SEL_NO_EDGE,               // External event edge selection.
-	    .cpcdis   = FALSE,                        // Counter disable when RC compare.
-	    .cpcstop  = FALSE,                        // Counter clock stopped with RC compare.
-
-	    .burst    = TC_BURST_NOT_GATED,           // Burst signal selection.
-	    .clki     = TC_CLOCK_RISING_EDGE,         // Clock inversion.
-	    .tcclks   = TC_CLOCK_SOURCE_TC2           // Internal source clock 3, connected to fPBA / 2.
-	  };
-
-	  // Assign I/O to timer/counter channel pin & function.
-	  gpio_enable_module_pin(WIFI_TC_CHANNEL_PIN, WIFI_TC_CHANNEL_FUNCTION);
-
-	  // Initialize the timer/counter.
-	  tc_init_waveform(tc, &waveform_opt);  // Initialize the timer/counter waveform.
-
-	  // Set the compare triggers.
-	  tc_write_ra(tc, WIFI_TC_CHANNEL_ID, 0x01A4);     // Set RA value.
-	  tc_write_rc(tc, WIFI_TC_CHANNEL_ID, 0x0348);     // Set RC value.
-
-	  // Start the timer/counter.
-	  tc_start(tc, WIFI_TC_CHANNEL_ID);
-
-}
-
-/**
- *
- */
-void 
-poll(struct ctx_server* hs)
-{
-        /* this will trigger any scheduled timer callbacks */
-        timer_poll();
-
-        /* handle console input */
-        console_poll();
-
-        /* wl api 'tick' */
-        wl_tick(timer_get_ms());
-
-        /* lwip driver poll */
-        wlif_poll(hs->net_cfg.netif);
-
-        if (initSpiComplete) spi_poll(hs->net_cfg.netif);
-
-#ifdef WITH_GUI
-        gui_exec(timer_get_ms());
-#endif
-}
-
-void initShell(void* ctx)
-{
-	/* initialize shell */
-	INFO_INIT("Shell init...\n");
-        console_init();
-        console_add_cmd("scan", cmd_scan, NULL);
-        console_add_cmd("connect", cmd_connect, NULL);
-        console_add_cmd("setkey", cmd_setkey, NULL);
-        console_add_cmd("status", cmd_status, ctx);
-        console_add_cmd("debug", cmd_debug, NULL);
-        console_add_cmd("dumpBuf", cmd_dumpBuf, NULL);
-		console_add_cmd("ipconfig", cmd_set_ip, ctx);
-#ifdef ADD_CMDS
-        console_add_cmd("powersave", cmd_power, NULL);
-        console_add_cmd("psconf", cmd_psconf, NULL);
-#endif
-#ifdef PING_CMD
-        console_add_cmd("ping", cmd_ping, NULL);
-#endif
-        console_add_cmd("ttcp", cmd_ttcp, NULL);
-#ifdef WITH_WPA
-        console_add_cmd("wpass", cmd_setpass, NULL);
-        console_add_cmd("dpass", cmd_delpass, NULL);
-#endif
-#ifdef _SPI_STATS_
-        console_add_cmd("spiStat", cmd_statSpi, NULL);
-        console_add_cmd("resetSpiStat", cmd_resetStatSpi, NULL);
-#endif
-#ifdef _DNS_CMD_
-        console_add_cmd("getHost", cmd_gethostbyname, NULL);
-        console_add_cmd("setDNS", cmd_setDnsServer, NULL);
-#endif
-        console_add_cmd("startSrv", cmd_startSrv, NULL);
-        console_add_cmd("startCli", cmd_startCli, NULL);
-        console_add_cmd("sendUdp", cmd_sendUdpData, NULL);
-
-}
-
-/**
- *
- */
-void 
-wl_init_complete_cb(void* ctx) 
-{
-	struct ctx_server *hs = ctx;
-    struct ip_addr ipaddr, netmask, gw;
-	wl_err_t wl_status;
-	
-	if (hs->net_cfg.dhcp_enabled == INIT_IP_CONFIG)
-	{
-		IP4_ADDR(&gw, 0,0,0,0);
-		IP4_ADDR(&ipaddr, 0,0,0,0);
-		IP4_ADDR(&netmask, 0,0,0,0);
-			
-		/* default is dhcp enabled */
-		hs->net_cfg.dhcp_enabled = DYNAMIC_IP_CONFIG;
-	}
-
-    start_ip_stack(&hs->net_cfg,
-                   ipaddr,
-                   netmask,
-                   gw);
-    netif_set_status_callback(hs->net_cfg.netif, ip_status_cb);
-
-    INFO_INIT("Starting CM...\n");
-    /* start connection manager */
-    wl_status = wl_cm_init(wl_cm_scan_cb, wl_cm_conn_cb, wl_cm_disconn_cb, hs);
-    ASSERT(wl_status == WL_SUCCESS, "failed to init wl conn mgr");
-    wl_cm_start();
-
-    wl_scan();
-
-    if (initSpi(hs)){
-    	WARN("Spi not initialized\n");
-    }else
-    {
-    	initSpiComplete = true;
-        AVAIL_FOR_SPI();
-    }
-
-    hs->wl_init_complete = 1;
-}
-
-void startup_init(void)
-{
-	INIT_SIGNAL_FOR_SPI();
-	BUSY_FOR_SPI();
-
-	// if DEBUG enabled use DEB_PIN_GPIO for debug purposes
-    DEB_PIN_ENA();
-	DEB_PIN_ENA(2);
-    DEB_PIN_UP();
-	DEB_PIN_UP(2);
-}
-
-const char timestamp[] = __TIMESTAMP__;
-
-/**
- *
- */
-int
-main(void)
-{
-	wl_err_t wl_status;
-	int status;
-	struct ctx_server *hs;
-    enum wl_host_attention_mode mode;
-
-    startup_init();
-
-    board_init();
-
-    led_init();
-
-    tc_init();
-
-    delay_init(FOSC0);
-
-#ifdef _TEST_SPI_
-    for (;;)
-    {
-    	 /* handle console input */
-
-    	console_poll();
-
-    	spi_poll(NULL);
-
-     }
-#else
-    printk("Arduino Wifi Startup... [%s]\n", timestamp);
-
-    size_t size_ctx_server = sizeof(struct ctx_server);
-	hs = calloc(1, size_ctx_server);
-	ASSERT(hs, "out of memory");
-
-	size_t size_netif = sizeof(struct netif);
-	hs->net_cfg.netif = calloc(1, size_netif);
-	ASSERT(hs->net_cfg.netif, "out of memory");
-	hs->net_cfg.dhcp_enabled = INIT_IP_CONFIG;
-
-	INFO_INIT("hs:%p size:0x%x netif:%p size:0x%x\n", hs, size_ctx_server,
-			hs->net_cfg.netif, size_netif);
-    initShell(hs);
-	timer_init(NULL, NULL);
-    lwip_init();
-        
-	status = fw_download_init();
-	ASSERT(status == 0, "failed to prepare for firmware download\n");
-
-    wl_status = wl_transport_init(fw_read_cb, hs, &mode);
-    if (wl_status != WL_SUCCESS)
-            goto err;
-    INFO_INIT("Mode: 0x%x\n", mode);
-    wl_status = wl_init(hs, wl_init_complete_cb, mode);
-    if (wl_status != WL_SUCCESS)
-            goto err;
-
-    /* start main loop */
-    for (;;)
-            poll(hs);
-
-
-err:
-    /* show error message on console and display if wlan initialization fails */
-
-#define WL_CARD_FAILURE_STR     "Could not detect wl device, aborting\n"
-#define WL_FIRMWARE_INVALID_STR "Invalid firmware data, aborting\n"
-#define WL_OTHER_FAILURE_STR    "Failed to start wl initialization\n"
-
-    switch (wl_status) {
-    case WL_CARD_FAILURE:
-            printk(WL_CARD_FAILURE_STR);
-            break;
-
-    case WL_FIRMWARE_INVALID:
-            printk(WL_FIRMWARE_INVALID_STR);
-            break;
-
-    default:
-            printk(WL_OTHER_FAILURE_STR);
-            break;
-    }
-    for (;;) {
-            timer_poll();
-    }
-#endif
-}