Moving into firmwares directory.

1 files changed, 450 insertions, 0 deletions

diff --git a/firmwares/wifishield/wifiHD/src/lwipopts.h b/firmwares/wifishield/wifiHD/src/lwipopts.h
new file mode 100644
index 0000000..64965bf
--- /dev/null
+++ b/firmwares/wifishield/wifiHD/src/lwipopts.h
@@ -0,0 +1,450 @@
+/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/**
+ * @file
+ *
+ * lwIP Options Configuration
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef __LWIPOPTS_H__
+#define __LWIPOPTS_H__
+
+#include "wl_api.h"
+#include <board.h>
+
+#ifndef BOARD
+#error "BOARD must be defined"
+#endif
+
+/*
+   -----------------------------------------------
+   ---------- Platform specific locking ----------
+   -----------------------------------------------
+*/
+
+/** 
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#define NO_SYS                          1
+
+
+/*
+   ------------------------------------
+   ---------- Memory options ----------
+   ------------------------------------
+*/
+/**
+ * MEM_ALIGNMENT: should be set to the alignment of the CPU
+ *    4 byte alignment -> #define MEM_ALIGNMENT 4
+ *    2 byte alignment -> #define MEM_ALIGNMENT 2
+ */
+#define MEM_ALIGNMENT                   4
+
+/**
+ * MEM_SIZE: the size of the heap memory. If the application will send
+ * a lot of data that needs to be copied, this should be set high.
+ */
+#define MEM_SIZE                        16000
+
+
+/*
+   ------------------------------------------------
+   ---------- Internal Memory Pool Sizes ----------
+   ------------------------------------------------
+*/
+/**
+ * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
+ * If the application sends a lot of data out of ROM (or other static memory),
+ * this should be set high.
+ */
+#if BOARD == EVK1101 /* Reduced RAM */
+ #define MEMP_NUM_PBUF                   4
+#else
+ #define MEMP_NUM_PBUF                   30
+#endif
+/**
+ * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
+ * (requires the LWIP_RAW option)
+ */
+#define MEMP_NUM_RAW_PCB                4
+
+/**
+ * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+ * per active UDP "connection".
+ * (requires the LWIP_UDP option)
+ */
+#define MEMP_NUM_UDP_PCB                4
+
+/**
+ * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#define MEMP_NUM_TCP_PCB                2
+
+/**
+ * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#define MEMP_NUM_TCP_PCB_LISTEN         2
+
+/**
+ * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
+ * (requires the LWIP_TCP option)
+ */
+#if BOARD == EVK1101 /* Reduced RAM */
+ #define MEMP_NUM_TCP_SEG                2
+#else
+ #define MEMP_NUM_TCP_SEG                32
+#endif
+
+/**
+ * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
+ * packets (pbufs) that are waiting for an ARP request (to resolve
+ * their destination address) to finish.
+ * (requires the ARP_QUEUEING option)
+ */
+#define MEMP_NUM_ARP_QUEUE              2
+
+/**
+ * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
+ * (requires NO_SYS==0)
+ */
+#define MEMP_NUM_SYS_TIMEOUT            0
+
+/**
+ * MEMP_NUM_NETBUF: the number of struct netbufs.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#define MEMP_NUM_NETBUF                 0
+
+/**
+ * MEMP_NUM_NETCONN: the number of struct netconns.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#define MEMP_NUM_NETCONN                0
+
+/**
+ * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
+ * for callback/timeout API communication. 
+ * (only needed if you use tcpip.c)
+ */
+#define MEMP_NUM_TCPIP_MSG_API          0
+
+/**
+ * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
+ * for incoming packets. 
+ * (only needed if you use tcpip.c)
+ */
+#define MEMP_NUM_TCPIP_MSG_INPKT        0
+
+/**
+ * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. 
+ */
+#if BOARD == EVK1101 /* Reduced RAM */
+  #define PBUF_POOL_SIZE                  2
+#else
+  #define PBUF_POOL_SIZE                  32
+#endif
+/*
+   ---------------------------------
+   ---------- ARP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_ARP==1: Enable ARP functionality.
+ */
+#define LWIP_ARP                        1
+
+/*
+   --------------------------------
+   ---------- IP options ----------
+   --------------------------------
+*/
+/**
+ * IP_FORWARD==1: Enables the ability to forward IP packets across network
+ * interfaces. If you are going to run lwIP on a device with only one network
+ * interface, define this to 0.
+ */
+#define IP_FORWARD                      0
+
+/**
+ * IP_OPTIONS: Defines the behavior for IP options.
+ *      IP_OPTIONS==0_ALLOWED: All packets with IP options are dropped.
+ *      IP_OPTIONS==1_ALLOWED: IP options are allowed (but not parsed).
+ */
+#define IP_OPTIONS_ALLOWED              1
+
+/**
+ * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
+ * this option does not affect outgoing packet sizes, which can be controlled
+ * via IP_FRAG.
+ */
+#define IP_REASSEMBLY                   1
+
+/**
+ * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
+ * that this option does not affect incoming packet sizes, which can be
+ * controlled via IP_REASSEMBLY.
+ */
+#define IP_FRAG                         1
+
+/**
+ * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
+ * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
+ * in this time, the whole packet is discarded.
+ */
+#define IP_REASS_MAXAGE                 3
+
+/**
+ * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
+ * Since the received pbufs are enqueued, be sure to configure
+ * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
+ * packets even if the maximum amount of fragments is enqueued for reassembly!
+ */
+#if BOARD == EVK1101 /* Reduced RAM */
+ #define IP_REASS_MAX_PBUFS              PBUF_POOL_SIZE
+ #define MEMP_NUM_REASSDATA              PBUF_POOL_SIZE-1
+#else
+ #define IP_REASS_MAX_PBUFS              10
+#endif
+
+/**
+ * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
+ * fragmentation. Otherwise pbufs are allocated and reference the original
+ * packet data to be fragmented.
+ */
+#define IP_FRAG_USES_STATIC_BUF         0
+
+/**
+ * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
+ */
+#define IP_DEFAULT_TTL                  255
+
+/*
+   ----------------------------------
+   ---------- ICMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_ICMP==1: Enable ICMP module inside the IP stack.
+ * Be careful, disable that make your product non-compliant to RFC1122
+ */
+#define LWIP_ICMP                       1
+
+/**
+ * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
+ */
+#define ICMP_TTL                       (IP_DEFAULT_TTL)
+
+/*
+   ---------------------------------
+   ---------- RAW options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#define LWIP_RAW                        1
+
+/*
+   ----------------------------------
+   ---------- DHCP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_DHCP==1: Enable DHCP module.
+ */
+#define LWIP_DHCP                       1
+
+/*
+   ------------------------------------
+   ---------- AUTOIP options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_AUTOIP==1: Enable AUTOIP module.
+ */
+#define LWIP_AUTOIP                     0
+
+/*
+   ----------------------------------
+   ---------- SNMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP
+ * transport.
+ */
+#define LWIP_SNMP                       0
+#define SNMP_PRIVATE_MIB                0
+
+/*
+   ----------------------------------
+   ---------- IGMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_IGMP==1: Turn on IGMP module. 
+ */
+#define LWIP_IGMP                       0
+
+/*
+   ----------------------------------
+   ---------- DNS options -----------
+   ----------------------------------
+*/
+/**
+ * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
+ * transport.
+ */
+#define LWIP_DNS                        1
+
+/*
+   ---------------------------------
+   ---------- UDP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_UDP==1: Turn on UDP.
+ */
+#define LWIP_UDP                        1
+
+/**
+ * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
+ */
+#define LWIP_UDPLITE                    0
+
+/**
+ * UDP_TTL: Default Time-To-Live value.
+ */
+#define UDP_TTL                         (IP_DEFAULT_TTL)
+
+/*
+   ---------------------------------
+   ---------- TCP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_TCP==1: Turn on TCP.
+ */
+#define LWIP_TCP                        1
+
+/*
+   ----------------------------------
+   ---------- Pbuf options ----------
+   ----------------------------------
+*/
+/**
+ * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
+ * link level header. The default is 14, the standard value for
+ * Ethernet.
+ */
+#define PBUF_LINK_HLEN                  (14 + ETH_PAD_SIZE)
+
+/*
+   ------------------------------------
+   ---------- LOOPIF options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c
+ */
+#define LWIP_HAVE_LOOPIF                1
+#define LWIP_LOOPIF_MULTITHREADING      0
+
+/*
+   ----------------------------------------------
+   ---------- Sequential layer options ----------
+   ----------------------------------------------
+*/
+
+/**
+ * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
+ */
+#define LWIP_NETCONN                    0
+
+/*
+   ------------------------------------
+   ---------- Socket options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
+ */
+#define LWIP_SOCKET                     0
+
+/*
+   ----------------------------------------
+   ---------- Statistics options ----------
+   ----------------------------------------
+*/
+/**
+ * LWIP_STATS==1: Enable statistics collection in lwip_stats.
+ */
+#define LWIP_STATS                      1
+#define LINK_STATS                      1
+
+/* Misc */
+#define LWIP_NETIF_LINK_CALLBACK        1
+#define LWIP_NETIF_STATUS_CALLBACK      1
+#define LWIP_TIMEVAL_PRIVATE 0
+
+#undef DHCP_DOES_ARP_CHECK
+
+#if 0
+#define LWIP_DEBUG 1
+//#define NETIF_DEBUG LWIP_DBG_ON
+//#define DHCP_DEBUG LWIP_DBG_ON
+//#define ICMP_DEBUG LWIP_DBG_ON
+//#define TCP_DEBUG LWIP_DBG_ON
+//#define TCP_RTO_DEBUG LWIP_DBG_ON
+//#define IP_DEBUG LWIP_DBG_ON
+//#define TCP_CWND_DEBUG LWIP_DBG_ON
+//#define ETHARP_DEBUG LWIP_DBG_ON
+#define PBUF_DEBUG LWIP_DBG_ON
+//#define TCP_INPUT_DEBUG LWIP_DBG_ON
+//#define TCP_OUTPUT_DEBUG LWIP_DBG_ON
+#endif
+
+#define ETH_PAD_SIZE WL_HEADER_SIZE /* size of wifiengine header */
+#define MEM_LIBC_MALLOC 1
+
+#define TCP_MSS                         512
+#if BOARD == EVK1101 /* Reduced RAM */
+ #define TCP_SND_BUF                     (1460*1) /* MTU (1500) - IP - TCP hdrs == 1460 */
+#else
+ #define TCP_SND_BUF                     4096
+#endif
+#endif /* __LWIPOPTS_H__ */