Delete 'firmwares' folder

1 files changed, 0 insertions, 215 deletions

diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.c b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.c
deleted file mode 100644
index 99e9274..0000000
--- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/UTILS/DEBUG/print_funcs.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief Strings and integers print module for debug purposes.
- *
- * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
- * - Supported devices:  All AVR32 devices with a USART module can be used.
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#include "compiler.h"
-#include "gpio.h"
-#include "usart.h"
-#include "print_funcs.h"
-
-
-//! ASCII representation of hexadecimal digits.
-static const char HEX_DIGITS[16] = "0123456789ABCDEF";
-
-
-void init_dbg_rs232(long pba_hz)
-{
-  init_dbg_rs232_ex(DBG_USART_BAUDRATE, pba_hz);
-}
-
-
-void init_dbg_rs232_ex(unsigned long baudrate, long pba_hz)
-{
-  static const gpio_map_t DBG_USART_GPIO_MAP =
-  {
-    {DBG_USART_RX_PIN, DBG_USART_RX_FUNCTION},
-    {DBG_USART_TX_PIN, DBG_USART_TX_FUNCTION}
-  };
-
-  // Options for debug USART.
-  usart_options_t dbg_usart_options =
-  {
-    .baudrate = baudrate,
-    .charlength = 8,
-    .paritytype = USART_NO_PARITY,
-    .stopbits = USART_1_STOPBIT,
-    .channelmode = USART_NORMAL_CHMODE
-  };
-
-  // Setup GPIO for debug USART.
-  gpio_enable_module(DBG_USART_GPIO_MAP,
-                     sizeof(DBG_USART_GPIO_MAP) / sizeof(DBG_USART_GPIO_MAP[0]));
-
-  // Initialize it in RS232 mode.
-  usart_init_rs232(DBG_USART, &dbg_usart_options, pba_hz);
-}
-
-
-void print_dbg(const char *str)
-{
-  // Redirection to the debug USART.
-  print(DBG_USART, str);
-}
-
-
-void print_dbg_char(int c)
-{
-  // Redirection to the debug USART.
-  print_char(DBG_USART, c);
-}
-
-
-void print_dbg_ulong(unsigned long n)
-{
-  // Redirection to the debug USART.
-  print_ulong(DBG_USART, n);
-}
-
-
-void print_dbg_char_hex(unsigned char n)
-{
-  // Redirection to the debug USART.
-  print_char_hex(DBG_USART, n);
-}
-
-
-void print_dbg_short_hex(unsigned short n)
-{
-  // Redirection to the debug USART.
-  print_short_hex(DBG_USART, n);
-}
-
-
-void print_dbg_hex(unsigned long n)
-{
-  // Redirection to the debug USART.
-  print_hex(DBG_USART, n);
-}
-
-
-void print(volatile avr32_usart_t *usart, const char *str)
-{
-  // Invoke the USART driver to transmit the input string with the given USART.
-  usart_write_line(usart, str);
-}
-
-
-void print_char(volatile avr32_usart_t *usart, int c)
-{
-  // Invoke the USART driver to transmit the input character with the given USART.
-  usart_putchar(usart, c);
-}
-
-
-void print_ulong(volatile avr32_usart_t *usart, unsigned long n)
-{
-  char tmp[11];
-  int i = sizeof(tmp) - 1;
-
-  // Convert the given number to an ASCII decimal representation.
-  tmp[i] = '\0';
-  do
-  {
-    tmp[--i] = '0' + n % 10;
-    n /= 10;
-  } while (n);
-
-  // Transmit the resulting string with the given USART.
-  print(usart, tmp + i);
-}
-
-
-void print_char_hex(volatile avr32_usart_t *usart, unsigned char n)
-{
-  char tmp[3];
-  int i;
-
-  // Convert the given number to an ASCII hexadecimal representation.
-  tmp[2] = '\0';
-  for (i = 1; i >= 0; i--)
-  {
-    tmp[i] = HEX_DIGITS[n & 0xF];
-    n >>= 4;
-  }
-
-  // Transmit the resulting string with the given USART.
-  print(usart, tmp);
-}
-
-
-void print_short_hex(volatile avr32_usart_t *usart, unsigned short n)
-{
-  char tmp[5];
-  int i;
-
-  // Convert the given number to an ASCII hexadecimal representation.
-  tmp[4] = '\0';
-  for (i = 3; i >= 0; i--)
-  {
-    tmp[i] = HEX_DIGITS[n & 0xF];
-    n >>= 4;
-  }
-
-  // Transmit the resulting string with the given USART.
-  print(usart, tmp);
-}
-
-
-void print_hex(volatile avr32_usart_t *usart, unsigned long n)
-{
-  char tmp[9];
-  int i;
-
-  // Convert the given number to an ASCII hexadecimal representation.
-  tmp[8] = '\0';
-  for (i = 7; i >= 0; i--)
-  {
-    tmp[i] = HEX_DIGITS[n & 0xF];
-    n >>= 4;
-  }
-
-  // Transmit the resulting string with the given USART.
-  print(usart, tmp);
-}