Delete 'firmwares' folder

1 files changed, 0 insertions, 191 deletions

diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/RTC/rtc.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/RTC/rtc.h
deleted file mode 100644
index 5702c29..0000000
--- a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/RTC/rtc.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
-
-/*This file is prepared for Doxygen automatic documentation generation.*/
-/*! \file *********************************************************************
- *
- * \brief RTC driver for AVR32 UC3.
- *
- * AVR32 Real Time Counter driver module.
- *
- * - Compiler:           GNU GCC for AVR32
- * - Supported devices:  All AVR32 devices with an RTC and a PM module can be used.
- * - AppNote:
- *
- * \author               Atmel Corporation: http://www.atmel.com \n
- *                       Support and FAQ: http://support.atmel.no/
- *
- ******************************************************************************/
-
-/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an Atmel
- * AVR product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
- *
- */
-
-#ifndef _RTC_H_
-#define _RTC_H_
-
-#include "compiler.h"
-#include <avr32/io.h>
-
-
-/*! \name Oscillator Types
- */
-//! @{
-#define RTC_OSC_32KHZ    1
-#define RTC_OSC_RC       0
-//! @}
-
-/*! \name Predefined PSEL Values
- */
-//! @{
-
-//! The PSEL value to set the RTC source clock (after the prescaler) to 1 Hz,
-//! when using an external 32-kHz crystal.
-#define RTC_PSEL_32KHZ_1HZ    14
-
-//! The PSEL value to set the RTC source clock (after the prescaler) to 1.76 Hz,
-//! when using the internal RC oscillator (~ 115 kHz).
-#define RTC_PSEL_RC_1_76HZ    15
-
-//! @}
-
-
-/*!
- * \brief This function will initialise the RTC module.
- *        If you use the 32 KHz oscillator, it will enable this module.
- *        This function also set the top value of the RTC to 0xFFFFFFFF
- *        and the value to 0.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \param osc_type The oscillator you want to use. If you need a better
- *        accuracy, use the 32 KHz oscillator (i.e. RTC_OSC_32KHZ).
- * \param psel The preselector value for the corresponding oscillator (4-bits).
- *        To obtain this value, you can use this formula:
- *        psel = log(Fosc/Frtc)/log(2)-1, where Fosc is the frequency of the
- *        oscillator you are using (32 KHz or 115 KHz) and Frtc the frequency
- *        desired.
- * \return 1 if the initialisation succeds otherwize it will return 0.
- */
-extern int rtc_init(volatile avr32_rtc_t *rtc, unsigned char osc_type, unsigned char psel);
-
-/*!
- * \brief Enable the RTC.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- */
-extern void rtc_enable(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Disable the RTC.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- */
-extern void rtc_disable(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Enable the wake up feature of the RTC.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- */
-extern void rtc_enable_wake_up(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Disable the wake up feature of the RTC.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- */
-extern void rtc_disable_wake_up(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Enable the interrupt feature of the RTC.
- *        An interrupt is raised when the value of the RTC
- *        is equal to its top value.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- */
-extern void rtc_enable_interrupt(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Disable the interrupt feature of the RTC.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- */
-extern void rtc_disable_interrupt(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Clear the interrupt flag.
- *        Call this function once you handled the interrupt.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- */
-extern void rtc_clear_interrupt(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Get the status of interrupts.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \return 1 if the interrupts are enabled otherwize it returns 0.
- */
-extern int rtc_interrupt_enabled(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief Check if an interrupt is raised.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \return 1 if an interrupt is currently raised otherwize it returns 0.
- */
-extern int rtc_is_interrupt(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief This function sets the RTC current top value.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \param top The top value you want to store.
- */
-extern void rtc_set_top_value(volatile avr32_rtc_t *rtc, unsigned long top);
-
-/*!
- * \brief This function returns the RTC current top value.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \return The RTC current top value.
- */
-extern unsigned long rtc_get_top_value(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief This function checks if the RTC is busy or not.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \return 1 if the RTC is busy otherwize it will return 0.
- */
-extern int rtc_is_busy(volatile avr32_rtc_t *rtc);
-
-/*!
- * \brief This function sets the RTC current value.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \param val The value you want to store.
- */
-extern void rtc_set_value(volatile avr32_rtc_t *rtc, unsigned long val);
-
-/*!
- * \brief This function returns the RTC current value.
- * \param rtc Base address of the RTC (i.e. &AVR32_RTC).
- * \return The RTC current value.
- */
-extern unsigned long rtc_get_value(volatile avr32_rtc_t *rtc);
-
-
-#endif  // _RTC_H_