Moving into firmwares directory.

1 files changed, 251 insertions, 0 deletions

diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/PDCA/pdca.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/PDCA/pdca.h
new file mode 100644
index 0000000..5668fe9
--- /dev/null
+++ b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/PDCA/pdca.h
@@ -0,0 +1,251 @@
+/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*This file is prepared for Doxygen automatic documentation generation.*/
+/*! \file *********************************************************************
+ *
+ * \brief PDCA driver for AVR32 UC3.
+ *
+ * This file defines a useful set of functions for the PDCA interface on AVR32
+ * devices.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 devices with a PDCA module.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ ******************************************************************************/
+
+/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an Atmel
+ * AVR product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+ *
+ */
+
+#ifndef _PDCA_H_
+#define _PDCA_H_
+
+#include <avr32/io.h>
+
+
+//! Size of PDCA transfer: byte.
+#define PDCA_TRANSFER_SIZE_BYTE               AVR32_PDCA_BYTE
+
+//! Size of PDCA transfer: half-word.
+#define PDCA_TRANSFER_SIZE_HALF_WORD          AVR32_PDCA_HALF_WORD
+
+//! Size of PDCA transfer: word.
+#define PDCA_TRANSFER_SIZE_WORD               AVR32_PDCA_WORD
+
+/*! \name PDCA Driver Status Codes
+ */
+//! @{
+#define PDCA_SUCCESS 0
+#define PDCA_INVALID_ARGUMENT -1
+//! @}
+
+/*! \name PDCA Transfer Status Codes
+ */
+//! @{
+#define PDCA_TRANSFER_ERROR                   AVR32_PDCA_TERR_MASK
+#define PDCA_TRANSFER_COMPLETE                AVR32_PDCA_TRC_MASK
+#define PDCA_TRANSFER_COUNTER_RELOAD_IS_ZERO  AVR32_PDCA_RCZ_MASK
+//! @}
+
+
+//! PDCA channel options.
+typedef struct
+{
+  //! Memory address.
+  volatile  void         *addr          ;
+  //! Transfer counter.
+            unsigned int  size          ;
+  //! Next memory address.
+  volatile  void         *r_addr        ;
+  //! Next transfer counter.
+            unsigned int  r_size        ;
+  //! Select peripheral ID.
+            unsigned int  pid           ;
+  //! Select the size of the transfer (byte, half-word or word).
+            unsigned int  transfer_size ;
+#if (defined AVR32_PDCA_120_H_INCLUDED ) || (defined AVR32_PDCA_121_H_INCLUDED ) || (defined AVR32_PDCA_122_H_INCLUDED )
+// Note: the options in this preprocessor section are only available from the PDCA IP version 1.2.0 on.
+  //! Enable (\c 1) or disable (\c 0) the transfer upon event trigger.
+            unsigned char etrig         ;
+#endif // #ifdef AVR32_PDCA_120_H_INCLUDED
+} pdca_channel_options_t;
+
+
+/*! \brief Get PDCA channel handler
+ *
+ * \param pdca_ch_number  PDCA channel
+ *
+ * \return channel handled or PDCA_INVALID_ARGUMENT
+ */
+extern volatile avr32_pdca_channel_t *pdca_get_handler(unsigned int pdca_ch_number);
+
+/*! \brief Set the channel configuration
+ *
+ * \param pdca_ch_number PDCA channel
+ * \param opt channel option
+ */
+extern int pdca_init_channel(unsigned int pdca_ch_number, const pdca_channel_options_t *opt);
+
+/*! \brief Get the PDCA channel transfer enable status
+ *
+ * \param pdca_ch_number PDCA channel
+ *
+ * \return \c 1 if channel transfer is enabled, else \c 0
+ */
+extern unsigned int pdca_get_channel_status(unsigned int pdca_ch_number);
+
+/*! \brief Disable the PDCA for the given channel
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_disable(unsigned int pdca_ch_number);
+
+/*! \brief Enable the PDCA for the given channel
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_enable(unsigned int pdca_ch_number);
+
+/*! \brief Get PDCA channel load size (or remaining size if transfer started)
+ *
+ * \param pdca_ch_number PDCA channel
+ *
+ * \return size           current size to transfer
+ */
+extern unsigned int pdca_get_load_size(unsigned int pdca_ch_number);
+
+/*! \brief Set PDCA channel load values
+ *
+ * \param pdca_ch_number PDCA channel
+ * \param addr           address where data to load are stored
+ * \param size           size of the data block to load
+ */
+extern void pdca_load_channel(unsigned int pdca_ch_number, volatile void *addr, unsigned int size);
+
+/*! \brief Get PDCA channel reload size
+ *
+ * \param pdca_ch_number PDCA channel
+ *
+ * \return size           current reload size
+ */
+extern unsigned int pdca_get_reload_size(unsigned int pdca_ch_number);
+
+/*! \brief Set PDCA channel reload values
+ *
+ * \param pdca_ch_number PDCA channel
+ * \param addr           address where data to load are stored
+ * \param size           size of the data block to load
+ */
+extern void pdca_reload_channel(unsigned int pdca_ch_number, volatile void *addr, unsigned int size);
+
+/*! \brief Set the peripheral function to use with the PDCA channel
+ *
+ * \param pdca_ch_number PDCA channel
+ * \param pid the peripheral ID
+ */
+extern void pdca_set_peripheral_select(unsigned int pdca_ch_number, unsigned int pid);
+
+/*! \brief Set the size of the transfer
+ *
+ * \param pdca_ch_number PDCA channel
+ * \param transfer_size size of the transfer (byte, half-word or word)
+ */
+extern void pdca_set_transfer_size(unsigned int pdca_ch_number, unsigned int transfer_size);
+
+#if (defined AVR32_PDCA_120_H_INCLUDED ) || (defined AVR32_PDCA_121_H_INCLUDED ) || (defined AVR32_PDCA_122_H_INCLUDED )
+// Note: the functions in this preprocessor section are only available from the PDCA IP version 1.2.0 on.
+
+/*! \brief Disable the event-triggered transfer feature
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_disable_event_trigger(unsigned int pdca_ch_number);
+
+/*! \brief Enable the event-triggered transfer feature
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_enable_event_trigger(unsigned int pdca_ch_number);
+
+#endif // #ifdef AVR32_PDCA_120_H_INCLUDED
+
+/*! \brief Disable PDCA transfer error interrupt
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_disable_interrupt_transfer_error(unsigned int pdca_ch_number);
+
+/*! \brief Enable PDCA transfer error interrupt
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_enable_interrupt_transfer_error(unsigned int pdca_ch_number);
+
+/*! \brief Disable PDCA transfer interrupt when completed (ie TCR and TCRR are both zero)
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_disable_interrupt_transfer_complete(unsigned int pdca_ch_number);
+
+/*! \brief Enable PDCA transfer interrupt when completed (ie TCR and TCRR are both zero)
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_enable_interrupt_transfer_complete(unsigned int pdca_ch_number);
+
+/*! \brief Disable PDCA transfer interrupt when TCRR reaches zero
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_disable_interrupt_reload_counter_zero(unsigned int pdca_ch_number);
+
+/*! \brief Enable PDCA transfer interrupt when TCRR reaches zero
+ *
+ * \param pdca_ch_number PDCA channel
+ */
+extern void pdca_enable_interrupt_reload_counter_zero(unsigned int pdca_ch_number);
+
+/*! \brief Get PDCA channel transfer status
+ *
+ * \param pdca_ch_number PDCA channel
+ *
+ * \return PDCA transfer status with the following bit-masks:\n
+ *           - \c PDCA_TRANSFER_ERROR;\n
+ *           - \c PDCA_TRANSFER_COMPLETE;\n
+ *           - \c PDCA_TRANSFER_COUNTER_RELOAD_IS_ZERO.
+ */
+extern unsigned long pdca_get_transfer_status(unsigned int pdca_ch_number);
+
+
+#endif  // _PDCA_H_