Moving into firmwares directory.

1 files changed, 458 insertions, 0 deletions

diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.c b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.c
new file mode 100644
index 0000000..b6b83c7
--- /dev/null
+++ b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/DRIVERS/GPIO/gpio.c
@@ -0,0 +1,458 @@
+/* This source file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*This file has been prepared for Doxygen automatic documentation generation.*/
+/*! \file *********************************************************************
+ *
+ * \brief GPIO driver for AVR32 UC3.
+ *
+ * This file defines a useful set of functions for the GPIO.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 devices with a GPIO module can be used.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ *****************************************************************************/
+
+/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an Atmel
+ * AVR product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+ *
+ */
+
+#include "gpio.h"
+
+//! GPIO module instance.
+#define GPIO  AVR32_GPIO
+
+
+/*! \name Peripheral Bus Interface
+ */
+//! @{
+
+
+int gpio_enable_module(const gpio_map_t gpiomap, unsigned int size)
+{
+  int status = GPIO_SUCCESS;
+  unsigned int i;
+
+  for (i = 0; i < size; i++)
+  {
+    status |= gpio_enable_module_pin(gpiomap->pin, gpiomap->function);
+    gpiomap++;
+  }
+
+  return status;
+}
+
+
+int gpio_enable_module_pin(unsigned int pin, unsigned int function)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  // Enable the correct function.
+  switch (function)
+  {
+  case 0: // A function.
+    gpio_port->pmr0c = 1 << (pin & 0x1F);
+    gpio_port->pmr1c = 1 << (pin & 0x1F);
+#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED)
+    gpio_port->pmr2c = 1 << (pin & 0x1F);
+#endif
+    break;
+
+  case 1: // B function.
+    gpio_port->pmr0s = 1 << (pin & 0x1F);
+    gpio_port->pmr1c = 1 << (pin & 0x1F);
+#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED)
+    gpio_port->pmr2c = 1 << (pin & 0x1F);
+#endif
+    break;
+
+  case 2: // C function.
+    gpio_port->pmr0c = 1 << (pin & 0x1F);
+    gpio_port->pmr1s = 1 << (pin & 0x1F);
+#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED)
+    gpio_port->pmr2c = 1 << (pin & 0x1F);
+#endif
+    break;
+
+  case 3: // D function.
+    gpio_port->pmr0s = 1 << (pin & 0x1F);
+    gpio_port->pmr1s = 1 << (pin & 0x1F);
+#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED)
+    gpio_port->pmr2c = 1 << (pin & 0x1F);
+#endif
+    break;
+
+#if defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED)
+  case 4: // E function.
+    gpio_port->pmr0c = 1 << (pin & 0x1F);
+    gpio_port->pmr1c = 1 << (pin & 0x1F);
+    gpio_port->pmr2s = 1 << (pin & 0x1F);
+    break;
+    
+  case 5: // F function.
+    gpio_port->pmr0s = 1 << (pin & 0x1F);
+    gpio_port->pmr1c = 1 << (pin & 0x1F);
+    gpio_port->pmr2s = 1 << (pin & 0x1F);
+    break;
+    
+  case 6: // G function.
+    gpio_port->pmr0c = 1 << (pin & 0x1F);
+    gpio_port->pmr1s = 1 << (pin & 0x1F);
+    gpio_port->pmr2s = 1 << (pin & 0x1F);
+    break;
+    
+  case 7: // H function.
+    gpio_port->pmr0s = 1 << (pin & 0x1F);
+    gpio_port->pmr1s = 1 << (pin & 0x1F);
+    gpio_port->pmr2s = 1 << (pin & 0x1F);
+    break;
+#endif
+
+  default:
+    return GPIO_INVALID_ARGUMENT;
+  }
+
+  // Disable GPIO control.
+  gpio_port->gperc = 1 << (pin & 0x1F);
+
+  return GPIO_SUCCESS;
+}
+
+
+void gpio_enable_gpio(const gpio_map_t gpiomap, unsigned int size)
+{
+  unsigned int i;
+
+  for (i = 0; i < size; i++)
+  {
+    gpio_enable_gpio_pin(gpiomap->pin);
+    gpiomap++;
+  }
+}
+
+
+void gpio_enable_gpio_pin(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->oderc = 1 << (pin & 0x1F);
+  gpio_port->gpers = 1 << (pin & 0x1F);
+}
+
+
+// The open-drain mode is not synthesized on the current AVR32 products.
+// If one day some AVR32 products have this feature, the corresponding part
+// numbers should be listed in the #if below.
+// Note that other functions are available in this driver to use pins with open
+// drain in GPIO mode. The advantage of the open-drain mode functions over these
+// other functions is that they can be used not only in GPIO mode but also in
+// module mode.
+#if 0
+
+
+void gpio_enable_pin_open_drain(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->odmers = 1 << (pin & 0x1F);
+}
+
+
+void gpio_disable_pin_open_drain(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->odmerc = 1 << (pin & 0x1F);
+}
+
+
+#endif
+
+
+void gpio_enable_pin_pull_up(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->puers = 1 << (pin & 0x1F);
+#if defined(AVR32_GPIO_200_H_INCLUDED) || defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED)
+  gpio_port->pderc = 1 << (pin & 0x1F);
+#endif
+}
+
+
+void gpio_disable_pin_pull_up(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->puerc = 1 << (pin & 0x1F);
+}
+
+#if defined(AVR32_GPIO_200_H_INCLUDED) || defined(AVR32_GPIO_210_H_INCLUDED) || defined(AVR32_GPIO_211_H_INCLUDED)
+// Added support of Pull-up Resistor, Pull-down Resistor and Buskeeper Control.
+
+/*! \brief Enables the pull-down resistor of a pin.
+ *
+ * \param pin The pin number.
+ */
+void gpio_enable_pin_pull_down(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->puerc = 1 << (pin & 0x1F);
+  gpio_port->pders = 1 << (pin & 0x1F);
+}
+
+/*! \brief Disables the pull-down resistor of a pin.
+ *
+ * \param pin The pin number.
+ */
+void gpio_disable_pin_pull_down(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->pderc = 1 << (pin & 0x1F);
+}
+
+/*! \brief Enables the buskeeper functionality on a pin.
+ *
+ * \param pin The pin number.
+ */
+void gpio_enable_pin_buskeeper(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->puers = 1 << (pin & 0x1F);
+  gpio_port->pders = 1 << (pin & 0x1F);
+}
+
+/*! \brief Disables the buskeeper functionality on a pin.
+ *
+ * \param pin The pin number.
+ */
+void gpio_disable_pin_buskeeper(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->puerc = 1 << (pin & 0x1F);
+  gpio_port->pderc = 1 << (pin & 0x1F);
+}
+
+#endif
+
+int gpio_get_pin_value(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  return (gpio_port->pvr >> (pin & 0x1F)) & 1;
+}
+
+
+int gpio_get_gpio_pin_output_value(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  return (gpio_port->ovr >> (pin & 0x1F)) & 1;
+}
+
+
+int gpio_get_gpio_open_drain_pin_output_value(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  return ((gpio_port->oder >> (pin & 0x1F)) & 1) ^ 1;
+}
+
+
+void gpio_set_gpio_pin(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  gpio_port->ovrs  = 1 << (pin & 0x1F); // Value to be driven on the I/O line: 1.
+  gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin.
+  gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin.
+}
+
+
+void gpio_clr_gpio_pin(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  gpio_port->ovrc  = 1 << (pin & 0x1F); // Value to be driven on the I/O line: 0.
+  gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin.
+  gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin.
+}
+
+
+void gpio_tgl_gpio_pin(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  gpio_port->ovrt  = 1 << (pin & 0x1F); // Toggle the I/O line.
+  gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin.
+  gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin.
+}
+
+
+void gpio_set_gpio_open_drain_pin(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  gpio_port->oderc = 1 << (pin & 0x1F); // The GPIO output driver is disabled for that pin.
+  gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin.
+}
+
+
+void gpio_clr_gpio_open_drain_pin(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  gpio_port->ovrc  = 1 << (pin & 0x1F); // Value to be driven on the I/O line: 0.
+  gpio_port->oders = 1 << (pin & 0x1F); // The GPIO output driver is enabled for that pin.
+  gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin.
+}
+
+
+void gpio_tgl_gpio_open_drain_pin(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  gpio_port->ovrc  = 1 << (pin & 0x1F); // Value to be driven on the I/O line if the GPIO output driver is enabled: 0.
+  gpio_port->odert = 1 << (pin & 0x1F); // The GPIO output driver is toggled for that pin.
+  gpio_port->gpers = 1 << (pin & 0x1F); // The GPIO module controls that pin.
+}
+
+
+void gpio_enable_pin_glitch_filter(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->gfers = 1 << (pin & 0x1F);
+}
+
+
+void gpio_disable_pin_glitch_filter(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->gferc = 1 << (pin & 0x1F);
+}
+
+/*! \brief Configure the edge detector of an input pin
+ *
+ * \param pin The pin number.
+ * \param mode The edge detection mode (\ref GPIO_PIN_CHANGE, \ref GPIO_RISING_EDGE
+ *             or \ref GPIO_FALLING_EDGE).
+ *
+ * \return \ref GPIO_SUCCESS or \ref GPIO_INVALID_ARGUMENT.
+ */
+static int gpio_configure_edge_detector(unsigned int pin, unsigned int mode)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  
+  // Configure the edge detector.
+  switch (mode)
+  {
+  case GPIO_PIN_CHANGE:
+    gpio_port->imr0c = 1 << (pin & 0x1F);
+    gpio_port->imr1c = 1 << (pin & 0x1F);
+    break;
+
+  case GPIO_RISING_EDGE:
+    gpio_port->imr0s = 1 << (pin & 0x1F);
+    gpio_port->imr1c = 1 << (pin & 0x1F);
+    break;
+
+  case GPIO_FALLING_EDGE:
+    gpio_port->imr0c = 1 << (pin & 0x1F);
+    gpio_port->imr1s = 1 << (pin & 0x1F);
+    break;
+
+  default:
+    return GPIO_INVALID_ARGUMENT;
+  }
+
+  return GPIO_SUCCESS;
+}
+
+
+int gpio_enable_pin_interrupt(unsigned int pin, unsigned int mode)
+{
+  volatile avr32_gpio_port_t  *gpio_port = &GPIO.port[pin >> 5];
+
+  // Enable the glitch filter.
+  gpio_port->gfers = 1 << (pin & 0x1F);
+
+  // Configure the edge detector.
+  if(GPIO_INVALID_ARGUMENT == gpio_configure_edge_detector(pin, mode))
+    return(GPIO_INVALID_ARGUMENT);
+
+  // Enable interrupt.
+  gpio_port->iers = 1 << (pin & 0x1F);
+
+  return GPIO_SUCCESS;
+}
+
+
+void gpio_disable_pin_interrupt(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->ierc = 1 << (pin & 0x1F);
+}
+
+
+int gpio_get_pin_interrupt_flag(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  return (gpio_port->ifr >> (pin & 0x1F)) & 1;
+}
+
+
+void gpio_clear_pin_interrupt_flag(unsigned int pin)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+  gpio_port->ifrc = 1 << (pin & 0x1F);
+}
+
+
+//#
+//# Peripheral Event System Support.
+//#
+#if UC3L
+int gpio_configure_pin_periph_event_mode(unsigned int pin, unsigned int mode, unsigned int use_igf)
+{
+  volatile avr32_gpio_port_t *gpio_port = &GPIO.port[pin >> 5];
+
+  if(TRUE == use_igf)
+  {
+    // Enable the glitch filter.
+    gpio_port->gfers = 1 << (pin & 0x1F);
+  }
+  else
+  {
+    // Disable the glitch filter.
+    gpio_port->gferc = 1 << (pin & 0x1F);
+  }
+
+  // Configure the edge detector.
+  return(gpio_configure_edge_detector(pin, mode));
+}
+
+#endif
+
+//! @}