Moving into firmwares directory.

1 files changed, 191 insertions, 0 deletions

diff --git a/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h
new file mode 100644
index 0000000..a577124
--- /dev/null
+++ b/firmwares/wifishield/wifiHD/src/SOFTWARE_FRAMEWORK/BOARDS/ARDUINO/led.h
@@ -0,0 +1,191 @@
+/* This header file is part of the ATMEL AVR-UC3-SoftwareFramework-1.7.0 Release */
+
+/*This file is prepared for Doxygen automatic documentation generation.*/
+/*! \file *********************************************************************
+ *
+ * \brief AT32UC3A EVK1100 board LEDs support package.
+ *
+ * This file contains definitions and services related to the LED features of
+ * the EVK1100 board.
+ *
+ * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
+ * - Supported devices:  All AVR32 AT32UC3A devices can be used.
+ * - AppNote:
+ *
+ * \author               Atmel Corporation: http://www.atmel.com \n
+ *                       Support and FAQ: http://support.atmel.no/
+ *
+ ******************************************************************************/
+
+/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an Atmel
+ * AVR product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+ *
+ */
+
+#ifndef _LED_H_
+#define _LED_H_
+
+#include "compiler.h"
+
+
+/*! \name Identifiers of LEDs to Use with LED Functions
+ */
+//! @{
+#define LED0  0x01
+#define LED1  0x02
+#define LED2  0x04
+#define LED3  0x08
+#define LED4  0x10
+#define LED5  0x20
+#define LED6  0x40
+#define LED7  0x80
+//! @}
+
+
+/*! \brief Gets the last state of all LEDs set through the LED API.
+ *
+ * \return State of all LEDs (1 bit per LED).
+ *
+ * \note The GPIO pin configuration of all LEDs is left unchanged.
+ */
+extern U32 LED_Read_Display(void);
+
+/*! \brief Sets the state of all LEDs.
+ *
+ * \param leds New state of all LEDs (1 bit per LED).
+ *
+ * \note The pins of all LEDs are set to GPIO output mode.
+ */
+extern void LED_Display(U32 leds);
+
+/*! \brief Gets the last state of the specified LEDs set through the LED API.
+ *
+ * \param mask LEDs of which to get the state (1 bit per LED).
+ *
+ * \return State of the specified LEDs (1 bit per LED).
+ *
+ * \note The GPIO pin configuration of all LEDs is left unchanged.
+ */
+extern U32 LED_Read_Display_Mask(U32 mask);
+
+/*! \brief Sets the state of the specified LEDs.
+ *
+ * \param mask LEDs of which to set the state (1 bit per LED).
+ *
+ * \param leds New state of the specified LEDs (1 bit per LED).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+extern void LED_Display_Mask(U32 mask, U32 leds);
+
+/*! \brief Tests the last state of the specified LEDs set through the LED API.
+ *
+ * \param leds LEDs of which to test the state (1 bit per LED).
+ *
+ * \return \c TRUE if at least one of the specified LEDs has a state on, else
+ *         \c FALSE.
+ *
+ * \note The GPIO pin configuration of all LEDs is left unchanged.
+ */
+extern Bool LED_Test(U32 leds);
+
+/*! \brief Turns off the specified LEDs.
+ *
+ * \param leds LEDs to turn off (1 bit per LED).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+extern void LED_Off(U32 leds);
+
+/*! \brief Turns on the specified LEDs.
+ *
+ * \param leds LEDs to turn on (1 bit per LED).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+extern void LED_On(U32 leds);
+
+/*! \brief Toggles the specified LEDs.
+ *
+ * \param leds LEDs to toggle (1 bit per LED).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+extern void LED_Toggle(U32 leds);
+
+/*! \brief Gets as a bit-field the last state of the specified LEDs set through
+ *         the LED API.
+ *
+ * \param field LEDs of which to get the state (1 bit per LED).
+ *
+ * \return State of the specified LEDs (1 bit per LED, beginning with the first
+ *         specified LED).
+ *
+ * \note The GPIO pin configuration of all LEDs is left unchanged.
+ */
+extern U32 LED_Read_Display_Field(U32 field);
+
+/*! \brief Sets as a bit-field the state of the specified LEDs.
+ *
+ * \param field LEDs of which to set the state (1 bit per LED).
+ * \param leds New state of the specified LEDs (1 bit per LED, beginning with
+ *             the first specified LED).
+ *
+ * \note The pins of the specified LEDs are set to GPIO output mode.
+ */
+extern void LED_Display_Field(U32 field, U32 leds);
+
+/*! \brief Gets the intensity of the specified LED.
+ *
+ * \param led LED of which to get the intensity (1 bit per LED; only the least
+ *            significant set bit is used).
+ *
+ * \return Intensity of the specified LED (0x00 to 0xFF).
+ *
+ * \warning The PWM channel of the specified LED is supposed to be used only by
+ *          this module.
+ *
+ * \note The GPIO pin configuration of all LEDs is left unchanged.
+ */
+extern U8 LED_Get_Intensity(U32 led);
+
+/*! \brief Sets the intensity of the specified LEDs.
+ *
+ * \param leds LEDs of which to set the intensity (1 bit per LED).
+ * \param intensity New intensity of the specified LEDs (0x00 to 0xFF).
+ *
+ * \warning The PWM channels of the specified LEDs are supposed to be used only
+ *          by this module.
+ *
+ * \note The pins of the specified LEDs are set to PWM output mode.
+ */
+extern void LED_Set_Intensity(U32 leds, U8 intensity);
+
+
+#endif  // _LED_H_