Delete 'firmwares' folder

2 files changed, 0 insertions, 216 deletions

diff --git a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade.sh b/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade.sh
deleted file mode 100755
index e3a7d7f..0000000
--- a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade.sh
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/bin/sh
-
-WIFI_FW_PATH="/hardware/arduino/avr/firmwares/wifishield/binary"
-AVR_TOOLS_PATH="/hardware/tools/avr/bin"
-
-TARGET_MICRO="at32uc3a1256"
-
-
-progname=$0
-
-usage () {
-cat <<EOF
-Usage: $progname [-a Arduino_path] [-f which_firmware] [-h] 
-       -a set the path where the Arduino IDE is installed
-       -f the firmware you want to upload, valid parameters are:
-	  shield  - to upgrade the WiFi shield firmware
-	  all     - to upgrade both firmwares
-       -h help
-EOF
-  exit 0
-}
-
-upgradeHDmodule () {
-  sleep 1 # Give time to the shield to end the boot
-  echo "****Upgrade HD WiFi module firmware****\n"
-  dfu-programmer $TARGET_MICRO erase 
-  dfu-programmer $TARGET_MICRO flash --suppress-bootloader-mem $WIFI_FW_PATH/wifi_dnld.hex
-  dfu-programmer $TARGET_MICRO start
-  
-  if [ $? != 0 ] ; then 
-  echo "\nError during device initialization, please close the J3 jumper and press the reset button.\nTry -h for help\n"
-  exit 1 # if the device is not recognized exit 
-  fi
-
-  echo -n "\nPress the RESET button on the shield then type [ENTER] to upgrade the firmware of the shield..\n"
-  read readEnter
-}
-
-upgradeShield () {
-  sleep 1 # Give time to the shield to end the boot
-  echo "****Upgrade WiFi Shield firmware****\n"
-  dfu-programmer $TARGET_MICRO erase
-  dfu-programmer $TARGET_MICRO flash --suppress-bootloader-mem $WIFI_FW_PATH/wifiHD.hex
-  dfu-programmer $TARGET_MICRO start 
-
-  if [ $? != 0 ] ;  then 
-  echo "\nError during device initialization, please close the J3 jumper and press the reset button.\nTry -h for help\n"
-  exit 1 # if the device is not recognized exit 
-  fi
-
-  echo "\nDone. Remove the J3 jumper and press the RESET button on the shield."
-  echo "Thank you!\n"
-}
-
-
-cat <<EOF
-
-       Arduino WiFi Shield upgrade
-=========================================
-Instructions:
-
-To access to the USB devices correctly, the dfu-programmer needs to have the root permissions.
-
-You can upgrade the firmware of the antenna togheter with the shield firmware or only the shield firmware
-if there aren't changes on the antenna firmware.
-
-Use the '-h' parameter for help
-=========================================
-
-EOF
-
-if [ $USER = 'root' ] ; then  #check if the current user is root
-  while getopts ":a:f:h" opt; do
-    case $opt in
-	a)
-	  ARDUINO_PATH=$OPTARG 
-	  WIFI_FW_PATH=$ARDUINO_PATH$WIFI_FW_PATH
-	  AVR_TOOLS_PATH=$ARDUINO_PATH$AVR_TOOLS_PATH
-	  cd $AVR_TOOLS_PATH
-	  ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifi_dnld.elf  $WIFI_FW_PATH/wifi_dnld.hex	
-	  ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifiHD.elf  $WIFI_FW_PATH/wifiHD.hex
-	  ;;
-	f)
-	  if [ "$ARDUINO_PATH" != "" ] ; then
-	    if [ "$OPTARG" = "all" ] ; then
-	      upgradeHDmodule
-	      upgradeShield
-	      exit 0
-	    else
-	      if [ "$OPTARG" = "shield" ] ; then
-		upgradeShield
-		exit 0
-	      else
-		echo "invalid parameter for the -f [firmware] option, please retry."
-		echo "Type -h for help\n"
-		exit 1
-	      fi
-	     fi
-	  else
-	    echo "Arduino Path not setted. Retry...\n"
-	  fi
-	  ;;
-	h)
-	  usage ;; 
-	\?)
-	  echo "Invalid option: $OPTARG" >&2
-	  usage
-	  exit 1
-	  ;;
-	:)
-	  echo "Option -$OPTARG requires an argument." >&2
-	  exit 1
-	  ;;
-	esac
-  done
-else
-  echo "Please retry running the script as root.\n"
-fi
-
-shift $(($OPTIND - 1))
diff --git a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade_mac.sh b/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade_mac.sh
deleted file mode 100755
index dadaf29..0000000
--- a/firmwares/wifishield/scripts/ArduinoWifiShield_upgrade_mac.sh
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/sh
-
-WIFI_FW_PATH="/hardware/arduino/avr/firmwares/wifishield/binary"
-AVR_TOOLS_PATH="/hardware/tools/avr/bin"
-
-progname=$0
-
-usage () {
-cat <<EOF
-Usage: $progname [-a Arduino_path] [-f which_firmware] [-h] 
-       -a set the path where the Arduino IDE is installed
-       -f the firmware you want to upload, valid parameters are:
-	  shield  - to upgrade the WiFi shield firmware
-	  all     - to upgrade both firmwares
-       -h help
-EOF
-  exit 0
-}
-
-upgradeHDmodule () {
-  sleep 1 # Give time to the shield to end the boot
-  echo "****Upgrade HD WiFi module firmware****\n"
-  dfu-programmer at32uc3a1256 erase
-  dfu-programmer at32uc3a1256 flash --suppress-bootloader-mem $WIFI_FW_PATH/wifi_dnld.hex
-  dfu-programmer at32uc3a1256 start
-  echo -n "\nRemove the J3 jumper then press the RESET button on the shield then type [ENTER] to upgrade the firmware of the shield..\n"
-  read readEnter
-}
-
-upgradeShield () {
-  sleep 1 # Give time to the shield to end the boot
-  echo "****Upgrade WiFi Shield firmware****\n"
-  dfu-programmer at32uc3a1256 erase
-  dfu-programmer at32uc3a1256 flash --suppress-bootloader-mem $WIFI_FW_PATH/wifiHD.hex
-  dfu-programmer at32uc3a1256 start 
-  echo "\nDone. Remove the J3 jumper and press the RESET button on the shield."
-  echo "Thank you!\n"
-}
-
-cat <<EOF
-
-       Arduino WiFi Shield upgrade
-=========================================
-Disclaimer: to access to the USB devices correctly, the dfu-programmer needs to be used as root. Run this script as root.
-
-EOF
-
-if [ $USER = 'root' ] ; then  #check if the current user is root
-  while getopts ":a:f:h" opt; do
-    case $opt in
-	a)
-	  ARDUINO_PATH=$OPTARG 
-	  WIFI_FW_PATH=$ARDUINO_PATH$WIFI_FW_PATH
-	  AVR_TOOLS_PATH=$ARDUINO_PATH$AVR_TOOLS_PATH
-	  cd $AVR_TOOLS_PATH
-	  ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifi_dnld.elf  $WIFI_FW_PATH/wifi_dnld.hex	
-	  ./avr-objcopy --output-target=ihex $WIFI_FW_PATH/wifiHD.elf  $WIFI_FW_PATH/wifiHD.hex
-	  ;;
-	f)
-	  if [ "$ARDUINO_PATH" != "" ] ; then
-	    if [ "$OPTARG" = "all" ] ; then
-	      upgradeHDmodule
-	      upgradeShield
-	      exit 0
-	    else
-	      if [ "$OPTARG" = "shield" ] ; then
-		upgradeShield
-		exit 0
-	      else
-		echo "invalid parameter for the -f [firmware] option, please retry."
-		echo "Type -h for help\n"
-		exit 1
-	      fi
-	     fi
-	  else
-	    echo "Arduino Path not setted. Retry...\n"
-	  fi
-	  ;;
-	h)
-	  usage ;; 
-	\?)
-	  echo "Invalid option: $OPTARG" >&2
-	  usage
-	  exit 1
-	  ;;
-	:)
-	  echo "Option -$OPTARG requires an argument." >&2
-	  exit 1
-	  ;;
-	esac
-  done
-else
-  echo "You are not root!\n"
-fi
-
-shift $(($OPTIND - 1))