Delete 'firmwares' folder

7 files changed, 0 insertions, 2141 deletions

diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.c b/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.c
deleted file mode 100644
index 7bed831..0000000
--- a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.c
+++ /dev/null
@@ -1,728 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Main source file for the DFU class bootloader. This file contains the complete bootloader logic.

- */

-

-#define  INCLUDE_FROM_BOOTLOADER_C

-#include "Arduino-usbdfu.h"

-

-/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run

- *  via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application

- *  jumped to via an indirect jump to location 0x0000 (or other location specified by the host).

- */

-bool RunBootloader = true;

-

-/** Flag to indicate if the bootloader is waiting to exit. When the host requests the bootloader to exit and

- *  jump to the application address it specifies, it sends two sequential commands which must be properly

- *  acknowledged. Upon reception of the first the RunBootloader flag is cleared and the WaitForExit flag is set,

- *  causing the bootloader to wait for the final exit command before shutting down.

- */

-bool WaitForExit = false;

-

-/** Current DFU state machine state, one of the values in the DFU_State_t enum. */

-uint8_t DFU_State = dfuIDLE;

-

-/** Status code of the last executed DFU command. This is set to one of the values in the DFU_Status_t enum after

- *  each operation, and returned to the host when a Get Status DFU request is issued.

- */

-uint8_t DFU_Status = OK;

-

-/** Data containing the DFU command sent from the host. */

-DFU_Command_t SentCommand;

-

-/** Response to the last issued Read Data DFU command. Unlike other DFU commands, the read command

- *  requires a single byte response from the bootloader containing the read data when the next DFU_UPLOAD command

- *  is issued by the host.

- */

-uint8_t ResponseByte;

-

-/** Pointer to the start of the user application. By default this is 0x0000 (the reset vector), however the host

- *  may specify an alternate address when issuing the application soft-start command.

- */

-AppPtr_t AppStartPtr = (AppPtr_t)0x0000;

-

-/** 64-bit flash page number. This is concatenated with the current 16-bit address on USB AVRs containing more than

- *  64KB of flash memory.

- */

-uint8_t Flash64KBPage = 0;

-

-/** Memory start address, indicating the current address in the memory being addressed (either FLASH or EEPROM

- *  depending on the issued command from the host).

- */

-uint16_t StartAddr = 0x0000;

-

-/** Memory end address, indicating the end address to read to/write from in the memory being addressed (either FLASH

- *  of EEPROM depending on the issued command from the host).

- */

-uint16_t EndAddr = 0x0000;

-

-

-/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */

-volatile struct

-{

-	uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */

-	uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */

-	uint8_t PingPongLEDPulse; /**< Milliseconds remaining for enumeration Tx/Rx ping-pong LED pulse */

-} PulseMSRemaining;

-

-/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously 

- *  runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start

- *  the loaded application code.

- */

-int main(void)

-{

-	/* Configure hardware required by the bootloader */

-	SetupHardware();

-	

-	/* Enable global interrupts so that the USB stack can function */

-	sei();

-

-	/* Run the USB management task while the bootloader is supposed to be running */

-	while (RunBootloader || WaitForExit)

-	  USB_USBTask();

-	

-	/* Reset configured hardware back to their original states for the user application */

-	ResetHardware();

-	

-	/* Start the user application */

-	AppStartPtr();

-}

-

-/** Configures all hardware required for the bootloader. */

-void SetupHardware(void)

-{

-	/* Disable watchdog if enabled by bootloader/fuses */

-	MCUSR &= ~(1 << WDRF);

-	wdt_disable();

-

-	/* Disable clock division */

-//	clock_prescale_set(clock_div_1);

-	

-	/* Relocate the interrupt vector table to the bootloader section */

-	MCUCR = (1 << IVCE);

-	MCUCR = (1 << IVSEL);

-

-	LEDs_Init();

-

-	/* Initialize the USB subsystem */

-	USB_Init();

-}

-

-/** Resets all configured hardware required for the bootloader back to their original states. */

-void ResetHardware(void)

-{

-	/* Shut down the USB subsystem */

-	USB_ShutDown();

-	

-	/* Relocate the interrupt vector table back to the application section */

-	MCUCR = (1 << IVCE);

-	MCUCR = 0;

-}

-

-/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific

- *  control requests that are not handled internally by the USB library (including the DFU commands, which are

- *  all issued via the control endpoint), so that they can be handled appropriately for the application.

- */

-void EVENT_USB_Device_UnhandledControlRequest(void)

-{

-	/* Get the size of the command and data from the wLength value */

-	SentCommand.DataSize = USB_ControlRequest.wLength;

-

-	/* Turn off TX LED(s) once the TX pulse period has elapsed */

-	if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse))

-		LEDs_TurnOffLEDs(LEDMASK_TX);

-		

-	/* Turn off RX LED(s) once the RX pulse period has elapsed */

-	if (PulseMSRemaining.RxLEDPulse && !(--PulseMSRemaining.RxLEDPulse))

-		LEDs_TurnOffLEDs(LEDMASK_RX);

-

-	switch (USB_ControlRequest.bRequest)

-	{

-		case DFU_DNLOAD:

-			LEDs_TurnOnLEDs(LEDMASK_RX);

-			PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS;		

-		

-			Endpoint_ClearSETUP();

-			

-			/* Check if bootloader is waiting to terminate */

-			if (WaitForExit)

-			{

-				/* Bootloader is terminating - process last received command */

-				ProcessBootloaderCommand();

-				

-				/* Turn off TX/RX status LEDs so that they're not left on when application starts */

-				LEDs_TurnOffLEDs(LEDMASK_TX);

-				LEDs_TurnOffLEDs(LEDMASK_RX);

-				

-				/* Indicate that the last command has now been processed - free to exit bootloader */

-				WaitForExit = false;

-			}

-			  

-			/* If the request has a data stage, load it into the command struct */

-			if (SentCommand.DataSize)

-			{

-				while (!(Endpoint_IsOUTReceived()))

-				{				

-					if (USB_DeviceState == DEVICE_STATE_Unattached)

-					  return;

-				}

-

-				/* First byte of the data stage is the DNLOAD request's command */

-				SentCommand.Command = Endpoint_Read_Byte();

-					

-				/* One byte of the data stage is the command, so subtract it from the total data bytes */

-				SentCommand.DataSize--;

-				

-				/* Load in the rest of the data stage as command parameters */

-				for (uint8_t DataByte = 0; (DataByte < sizeof(SentCommand.Data)) &&

-				     Endpoint_BytesInEndpoint(); DataByte++)

-				{

-					SentCommand.Data[DataByte] = Endpoint_Read_Byte();

-					SentCommand.DataSize--;

-				}

-				

-				/* Process the command */

-				ProcessBootloaderCommand();

-			}

-			

-			/* Check if currently downloading firmware */

-			if (DFU_State == dfuDNLOAD_IDLE)

-			{									

-				if (!(SentCommand.DataSize))

-				{

-					DFU_State = dfuIDLE;

-				}

-				else

-				{

-					/* Throw away the filler bytes before the start of the firmware */

-					DiscardFillerBytes(DFU_FILLER_BYTES_SIZE);

-

-					/* Throw away the packet alignment filler bytes before the start of the firmware */

-					DiscardFillerBytes(StartAddr % FIXED_CONTROL_ENDPOINT_SIZE);

-					

-					/* Calculate the number of bytes remaining to be written */

-					uint16_t BytesRemaining = ((EndAddr - StartAddr) + 1);

-					

-					if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00))        // Write flash

-					{

-						/* Calculate the number of words to be written from the number of bytes to be written */

-						uint16_t WordsRemaining = (BytesRemaining >> 1);

-					

-						union

-						{

-							uint16_t Words[2];

-							uint32_t Long;

-						} CurrFlashAddress                 = {.Words = {StartAddr, Flash64KBPage}};

-						

-						uint32_t CurrFlashPageStartAddress = CurrFlashAddress.Long;

-						uint8_t  WordsInFlashPage          = 0;

-

-						while (WordsRemaining--)

-						{

-							/* Check if endpoint is empty - if so clear it and wait until ready for next packet */

-							if (!(Endpoint_BytesInEndpoint()))

-							{

-								Endpoint_ClearOUT();

-

-								while (!(Endpoint_IsOUTReceived()))

-								{				

-									if (USB_DeviceState == DEVICE_STATE_Unattached)

-									  return;

-								}

-							}

-

-							/* Write the next word into the current flash page */

-							boot_page_fill(CurrFlashAddress.Long, Endpoint_Read_Word_LE());

-

-							/* Adjust counters */

-							WordsInFlashPage      += 1;

-							CurrFlashAddress.Long += 2;

-

-							/* See if an entire page has been written to the flash page buffer */

-							if ((WordsInFlashPage == (SPM_PAGESIZE >> 1)) || !(WordsRemaining))

-							{

-								/* Commit the flash page to memory */

-								boot_page_write(CurrFlashPageStartAddress);

-								boot_spm_busy_wait();

-								

-								/* Check if programming incomplete */

-								if (WordsRemaining)

-								{

-									CurrFlashPageStartAddress = CurrFlashAddress.Long;

-									WordsInFlashPage          = 0;

-

-									/* Erase next page's temp buffer */

-									boot_page_erase(CurrFlashAddress.Long);

-									boot_spm_busy_wait();

-								}

-							}

-						}

-					

-						/* Once programming complete, start address equals the end address */

-						StartAddr = EndAddr;

-					

-						/* Re-enable the RWW section of flash */

-						boot_rww_enable();

-					}

-					else                                                   // Write EEPROM

-					{

-						while (BytesRemaining--)

-						{

-							/* Check if endpoint is empty - if so clear it and wait until ready for next packet */

-							if (!(Endpoint_BytesInEndpoint()))

-							{

-								Endpoint_ClearOUT();

-

-								while (!(Endpoint_IsOUTReceived()))

-								{				

-									if (USB_DeviceState == DEVICE_STATE_Unattached)

-									  return;

-								}

-							}

-

-							/* Read the byte from the USB interface and write to to the EEPROM */

-							eeprom_write_byte((uint8_t*)StartAddr, Endpoint_Read_Byte());

-							

-							/* Adjust counters */

-							StartAddr++;

-						}

-					}

-					

-					/* Throw away the currently unused DFU file suffix */

-					DiscardFillerBytes(DFU_FILE_SUFFIX_SIZE);

-				}

-			}

-

-			Endpoint_ClearOUT();

-

-			Endpoint_ClearStatusStage();

-

-			break;

-		case DFU_UPLOAD:

-			Endpoint_ClearSETUP();

-			

-			LEDs_TurnOnLEDs(LEDMASK_TX);

-			PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;

-

-			while (!(Endpoint_IsINReady()))

-			{				

-				if (USB_DeviceState == DEVICE_STATE_Unattached)

-				  return;

-			}

-							

-			if (DFU_State != dfuUPLOAD_IDLE)

-			{

-				if ((DFU_State == dfuERROR) && IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01))       // Blank Check

-				{

-					/* Blank checking is performed in the DFU_DNLOAD request - if we get here we've told the host

-					   that the memory isn't blank, and the host is requesting the first non-blank address */

-					Endpoint_Write_Word_LE(StartAddr);

-				}

-				else

-				{

-					/* Idle state upload - send response to last issued command */

-					Endpoint_Write_Byte(ResponseByte);

-				}

-			}

-			else

-			{

-				/* Determine the number of bytes remaining in the current block */

-				uint16_t BytesRemaining = ((EndAddr - StartAddr) + 1);

-

-				if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00))            // Read FLASH

-				{

-					/* Calculate the number of words to be written from the number of bytes to be written */

-					uint16_t WordsRemaining = (BytesRemaining >> 1);

-

-					union

-					{

-						uint16_t Words[2];

-						uint32_t Long;

-					} CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}};

-

-					while (WordsRemaining--)

-					{

-						/* Check if endpoint is full - if so clear it and wait until ready for next packet */

-						if (Endpoint_BytesInEndpoint() == FIXED_CONTROL_ENDPOINT_SIZE)

-						{

-							Endpoint_ClearIN();

-

-							while (!(Endpoint_IsINReady()))

-							{				

-								if (USB_DeviceState == DEVICE_STATE_Unattached)

-								  return;

-							}

-						}

-

-						/* Read the flash word and send it via USB to the host */

-						#if (FLASHEND > 0xFFFF)

-							Endpoint_Write_Word_LE(pgm_read_word_far(CurrFlashAddress.Long));

-						#else

-							Endpoint_Write_Word_LE(pgm_read_word(CurrFlashAddress.Long));							

-						#endif

-

-						/* Adjust counters */

-						CurrFlashAddress.Long += 2;

-					}

-					

-					/* Once reading is complete, start address equals the end address */

-					StartAddr = EndAddr;

-				}

-				else if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x02))       // Read EEPROM

-				{

-					while (BytesRemaining--)

-					{

-						/* Check if endpoint is full - if so clear it and wait until ready for next packet */

-						if (Endpoint_BytesInEndpoint() == FIXED_CONTROL_ENDPOINT_SIZE)

-						{

-							Endpoint_ClearIN();

-							

-							while (!(Endpoint_IsINReady()))

-							{				

-								if (USB_DeviceState == DEVICE_STATE_Unattached)

-								  return;

-							}

-						}

-

-						/* Read the EEPROM byte and send it via USB to the host */

-						Endpoint_Write_Byte(eeprom_read_byte((uint8_t*)StartAddr));

-

-						/* Adjust counters */

-						StartAddr++;

-					}

-				}

-

-				/* Return to idle state */

-				DFU_State = dfuIDLE;

-			}

-

-			Endpoint_ClearIN();

-

-			Endpoint_ClearStatusStage();

-			break;

-		case DFU_GETSTATUS:

-			Endpoint_ClearSETUP();

-			

-			/* Write 8-bit status value */

-			Endpoint_Write_Byte(DFU_Status);

-			

-			/* Write 24-bit poll timeout value */

-			Endpoint_Write_Byte(0);

-			Endpoint_Write_Word_LE(0);

-			

-			/* Write 8-bit state value */

-			Endpoint_Write_Byte(DFU_State);

-

-			/* Write 8-bit state string ID number */

-			Endpoint_Write_Byte(0);

-

-			Endpoint_ClearIN();

-			

-			Endpoint_ClearStatusStage();

-			break;		

-		case DFU_CLRSTATUS:

-			Endpoint_ClearSETUP();

-			

-			/* Reset the status value variable to the default OK status */

-			DFU_Status = OK;

-

-			Endpoint_ClearStatusStage();

-			break;

-		case DFU_GETSTATE:

-			Endpoint_ClearSETUP();

-			

-			/* Write the current device state to the endpoint */

-			Endpoint_Write_Byte(DFU_State);

-		

-			Endpoint_ClearIN();

-			

-			Endpoint_ClearStatusStage();

-			break;

-		case DFU_ABORT:

-			Endpoint_ClearSETUP();

-			

-			/* Turn off TX/RX status LEDs so that they're not left on when application starts */

-			LEDs_TurnOffLEDs(LEDMASK_TX);

-			LEDs_TurnOffLEDs(LEDMASK_RX);

-			

-			/* Reset the current state variable to the default idle state */

-			DFU_State = dfuIDLE;

-

-			Endpoint_ClearStatusStage();

-			break;

-	}

-}

-

-/** Routine to discard the specified number of bytes from the control endpoint stream. This is used to

- *  discard unused bytes in the stream from the host, including the memory program block suffix.

- *

- *  \param[in] NumberOfBytes  Number of bytes to discard from the host from the control endpoint

- */

-static void DiscardFillerBytes(uint8_t NumberOfBytes)

-{

-	while (NumberOfBytes--)

-	{

-		if (!(Endpoint_BytesInEndpoint()))

-		{

-			Endpoint_ClearOUT();

-

-			/* Wait until next data packet received */

-			while (!(Endpoint_IsOUTReceived()))

-			{				

-				if (USB_DeviceState == DEVICE_STATE_Unattached)

-				  return;

-			}

-		}

-		else

-		{

-			Endpoint_Discard_Byte();

-		}

-	}

-}

-

-/** Routine to process an issued command from the host, via a DFU_DNLOAD request wrapper. This routine ensures

- *  that the command is allowed based on the current secure mode flag value, and passes the command off to the

- *  appropriate handler function.

- */

-static void ProcessBootloaderCommand(void)

-{

-	/* Check if device is in secure mode */

-// 	if (IsSecure)

-// 	{

-// 		/* Don't process command unless it is a READ or chip erase command */

-// 		if (!(((SentCommand.Command == COMMAND_WRITE)             &&

-// 		        IS_TWOBYTE_COMMAND(SentCommand.Data, 0x00, 0xFF)) ||

-// 			   (SentCommand.Command == COMMAND_READ)))

-// 		{

-// 			/* Set the state and status variables to indicate the error */

-// 			DFU_State  = dfuERROR;

-// 			DFU_Status = errWRITE;

-// 			

-// 			/* Stall command */

-// 			Endpoint_StallTransaction();

-// 			

-// 			/* Don't process the command */

-// 			return;

-// 		}

-// 	}

-

-	/* Dispatch the required command processing routine based on the command type */

-	switch (SentCommand.Command)

-	{

-		case COMMAND_PROG_START:

-			ProcessMemProgCommand();

-			break;

-		case COMMAND_DISP_DATA:

-			ProcessMemReadCommand();

-			break;

-		case COMMAND_WRITE:

-			ProcessWriteCommand();

-			break;

-		case COMMAND_READ:

-			ProcessReadCommand();

-			break;

-		case COMMAND_CHANGE_BASE_ADDR:

-			if (IS_TWOBYTE_COMMAND(SentCommand.Data, 0x03, 0x00))              // Set 64KB flash page command

-			  Flash64KBPage = SentCommand.Data[2];

-			break;

-	}

-}

-

-/** Routine to concatenate the given pair of 16-bit memory start and end addresses from the host, and store them

- *  in the StartAddr and EndAddr global variables.

- */

-static void LoadStartEndAddresses(void)

-{

-	union

-	{

-		uint8_t  Bytes[2];

-		uint16_t Word;

-	} Address[2] = {{.Bytes = {SentCommand.Data[2], SentCommand.Data[1]}},

-	                {.Bytes = {SentCommand.Data[4], SentCommand.Data[3]}}};

-		

-	/* Load in the start and ending read addresses from the sent data packet */

-	StartAddr = Address[0].Word;

-	EndAddr   = Address[1].Word;

-}

-

-/** Handler for a Memory Program command issued by the host. This routine handles the preparations needed

- *  to write subsequent data from the host into the specified memory.

- */

-static void ProcessMemProgCommand(void)

-{

-	if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00) ||                          // Write FLASH command

-	    IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01))                            // Write EEPROM command

-	{

-		/* Load in the start and ending read addresses */

-		LoadStartEndAddresses();

-		

-		/* If FLASH is being written to, we need to pre-erase the first page to write to */

-		if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00))

-		{

-			union

-			{

-				uint16_t Words[2];

-				uint32_t Long;

-			} CurrFlashAddress = {.Words = {StartAddr, Flash64KBPage}};

-			

-			/* Erase the current page's temp buffer */

-			boot_page_erase(CurrFlashAddress.Long);

-			boot_spm_busy_wait();

-		}

-		

-		/* Set the state so that the next DNLOAD requests reads in the firmware */

-		DFU_State = dfuDNLOAD_IDLE;

-	}

-}

-

-/** Handler for a Memory Read command issued by the host. This routine handles the preparations needed

- *  to read subsequent data from the specified memory out to the host, as well as implementing the memory

- *  blank check command.

- */

-static void ProcessMemReadCommand(void)

-{

-	if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00) ||                          // Read FLASH command

-        IS_ONEBYTE_COMMAND(SentCommand.Data, 0x02))                            // Read EEPROM command

-	{

-		/* Load in the start and ending read addresses */

-		LoadStartEndAddresses();

-

-		/* Set the state so that the next UPLOAD requests read out the firmware */

-		DFU_State = dfuUPLOAD_IDLE;

-	}

-	else if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01))                       // Blank check FLASH command

-	{

-		uint32_t CurrFlashAddress = 0;

-

-		while (CurrFlashAddress < BOOT_START_ADDR)

-		{

-			/* Check if the current byte is not blank */

-			#if (FLASHEND > 0xFFFF)

-			if (pgm_read_byte_far(CurrFlashAddress) != 0xFF)

-			#else

-			if (pgm_read_byte(CurrFlashAddress) != 0xFF)

-			#endif

-			{

-				/* Save the location of the first non-blank byte for response back to the host */

-				Flash64KBPage = (CurrFlashAddress >> 16);

-				StartAddr     = CurrFlashAddress;

-			

-				/* Set state and status variables to the appropriate error values */

-				DFU_State  = dfuERROR;

-				DFU_Status = errCHECK_ERASED;

-

-				break;

-			}

-

-			CurrFlashAddress++;

-		}

-	}

-}

-

-/** Handler for a Data Write command issued by the host. This routine handles non-programming commands such as

- *  bootloader exit (both via software jumps and hardware watchdog resets) and flash memory erasure.

- */

-static void ProcessWriteCommand(void)

-{

-	if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x03))                            // Start application

-	{

-		/* Indicate that the bootloader is terminating */

-		WaitForExit = true;

-

-		/* Check if data supplied for the Start Program command - no data executes the program */

-		if (SentCommand.DataSize)

-		{

-			if (SentCommand.Data[1] == 0x01)                                   // Start via jump

-			{

-				union

-				{

-					uint8_t  Bytes[2];

-					AppPtr_t FuncPtr;

-				} Address = {.Bytes = {SentCommand.Data[4], SentCommand.Data[3]}};

-

-				/* Load in the jump address into the application start address pointer */

-				AppStartPtr = Address.FuncPtr;

-			}

-		}

-		else

-		{

-			if (SentCommand.Data[1] == 0x00)                                   // Start via watchdog

-			{

-				/* Start the watchdog to reset the AVR once the communications are finalized */

-				wdt_enable(WDTO_250MS);

-			}

-			else                                                               // Start via jump

-			{

-				/* Set the flag to terminate the bootloader at next opportunity */

-				RunBootloader = false;

-			}

-		}

-	}

-	else if (IS_TWOBYTE_COMMAND(SentCommand.Data, 0x00, 0xFF))                 // Erase flash

-	{

-		uint32_t CurrFlashAddress = 0;

-

-		/* Clear the application section of flash */

-		while (CurrFlashAddress < BOOT_START_ADDR)

-		{

-			boot_page_erase(CurrFlashAddress);

-			boot_spm_busy_wait();

-			boot_page_write(CurrFlashAddress);

-			boot_spm_busy_wait();

-

-			CurrFlashAddress += SPM_PAGESIZE;

-		}

-

-		/* Re-enable the RWW section of flash as writing to the flash locks it out */

-		boot_rww_enable();

-					

-		/* Memory has been erased, reset the security bit so that programming/reading is allowed */

-//		IsSecure = false;

-	}

-}

-

-/** Handler for a Data Read command issued by the host. This routine handles bootloader information retrieval

- *  commands such as device signature and bootloader version retrieval.

- */

-static void ProcessReadCommand(void)

-{

-	const uint8_t BootloaderInfo[3] = {BOOTLOADER_VERSION, BOOTLOADER_ID_BYTE1, BOOTLOADER_ID_BYTE2};

-	const uint8_t SignatureInfo[3]  = {AVR_SIGNATURE_1,    AVR_SIGNATURE_2,     AVR_SIGNATURE_3};

-

-	uint8_t DataIndexToRead = SentCommand.Data[1];

-

-	if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x00))                         // Read bootloader info

-	  ResponseByte = BootloaderInfo[DataIndexToRead];

-	else if (IS_ONEBYTE_COMMAND(SentCommand.Data, 0x01))                    // Read signature byte

-	  ResponseByte = SignatureInfo[DataIndexToRead - 0x30];

-}

diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.h b/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.h
deleted file mode 100644
index 4fb236e..0000000
--- a/firmwares/atmegaxxu2/arduino-usbdfu/Arduino-usbdfu.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for Arduino-usbdfu.c.

- */

-

-#ifndef _ARDUINO_USB_DFU_BOOTLOADER_H_

-#define _ARDUINO_USB_DFU_BOOTLOADER_H_

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/wdt.h>

-		#include <avr/boot.h>

-		#include <avr/pgmspace.h>

-		#include <avr/eeprom.h>

-		#include <avr/power.h>

-		#include <avr/interrupt.h>

-		#include <stdbool.h>

-	

-		#include "Descriptors.h"

-		

-		#include <LUFA/Drivers/Board/LEDs.h>

-		#include <LUFA/Drivers/USB/USB.h>

-	

-	/* Macros: */

-		/** LED mask for the library LED driver, to indicate TX activity. */

-		#define LEDMASK_TX               LEDS_LED1

-

-		/** LED mask for the library LED driver, to indicate RX activity. */

-		#define LEDMASK_RX               LEDS_LED2

-		

-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */

-		#define LEDMASK_ERROR            (LEDS_LED1 | LEDS_LED2)

-		

-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */

-		#define LEDMASK_BUSY             (LEDS_LED1 | LEDS_LED2)		

-	

-		/** Configuration define. Define this token to true to case the bootloader to reject all memory commands

-		 *  until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this

-		 *  can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are

-		 *  allowed at any time.

-		 */

-//		#define SECURE_MODE              false

-

-		/** Major bootloader version number. */

-		#define BOOTLOADER_VERSION_MINOR 2

-

-		/** Minor bootloader version number. */

-		#define BOOTLOADER_VERSION_REV   0

-

-		/** Complete bootloader version number expressed as a packed byte, constructed from the 

-		 *  two individual bootloader version macros.

-		 */

-		#define BOOTLOADER_VERSION       ((BOOTLOADER_VERSION_MINOR << 4) | BOOTLOADER_VERSION_REV)

-

-		/** First byte of the bootloader identification bytes, used to identify a device's bootloader. */

-		#define BOOTLOADER_ID_BYTE1      0xDC

-

-		/** Second byte of the bootloader identification bytes, used to identify a device's bootloader. */

-		#define BOOTLOADER_ID_BYTE2      0xFB

-		

-		/** Convenience macro, used to determine if the issued command is the given one-byte long command.

-		 *

-		 *  \param[in] dataarr  Command byte array to check against

-		 *  \param[in] cb1      First command byte to check

-		 */

-		#define IS_ONEBYTE_COMMAND(dataarr, cb1)       (dataarr[0] == (cb1))

-

-		/** Convenience macro, used to determine if the issued command is the given two-byte long command.

-		 *

-		 *  \param[in] dataarr  Command byte array to check against

-		 *  \param[in] cb1      First command byte to check

-		 *  \param[in] cb2      Second command byte to check

-		 */

-		#define IS_TWOBYTE_COMMAND(dataarr, cb1, cb2) ((dataarr[0] == (cb1)) && (dataarr[1] == (cb2)))

-	

-		/** Length of the DFU file suffix block, appended to the end of each complete memory write command.

-		 *  The DFU file suffix is currently unused (but is designed to give extra file information, such as

-		 *  a CRC of the complete firmware for error checking) and so is discarded.

-		 */

-		#define DFU_FILE_SUFFIX_SIZE     16

-

-		/** Length of the DFU file filler block, appended to the start of each complete memory write command.

-		 *  Filler bytes are added to the start of each complete memory write command, and must be discarded.

-		 */

-		#define DFU_FILLER_BYTES_SIZE    26

-	

-		/** DFU class command request to detach from the host. */

-		#define DFU_DETATCH              0x00

-

-		/** DFU class command request to send data from the host to the bootloader. */

-		#define DFU_DNLOAD               0x01

-

-		/** DFU class command request to send data from the bootloader to the host. */

-		#define DFU_UPLOAD               0x02

-

-		/** DFU class command request to get the current DFU status and state from the bootloader. */

-		#define DFU_GETSTATUS            0x03

-

-		/** DFU class command request to reset the current DFU status and state variables to their defaults. */

-		#define DFU_CLRSTATUS            0x04

-

-		/** DFU class command request to get the current DFU state of the bootloader. */

-		#define DFU_GETSTATE             0x05

-

-		/** DFU class command request to abort the current multi-request transfer and return to the dfuIDLE state. */

-		#define DFU_ABORT                0x06

-

-		/** DFU command to begin programming the device's memory. */

-		#define COMMAND_PROG_START       0x01

-

-		/** DFU command to begin reading the device's memory. */

-		#define COMMAND_DISP_DATA        0x03

-

-		/** DFU command to issue a write command. */

-		#define COMMAND_WRITE            0x04

-

-		/** DFU command to issue a read command. */

-		#define COMMAND_READ             0x05

-

-		/** DFU command to issue a memory base address change command, to set the current 64KB flash page

-		 *  that subsequent flash operations should use. */

-		#define COMMAND_CHANGE_BASE_ADDR 0x06

-

-	/* Type Defines: */

-		/** Type define for a non-returning function pointer to the loaded application. */

-		typedef void (*AppPtr_t)(void) ATTR_NO_RETURN;

-		

-		/** Type define for a structure containing a complete DFU command issued by the host. */

-		typedef struct

-		{

-			uint8_t  Command; /**< Single byte command to perform, one of the COMMAND_* macro values */

-			uint8_t  Data[5]; /**< Command parameters */

-			uint16_t DataSize; /**< Size of the command parameters */

-		} DFU_Command_t;

-

-	/* Enums: */

-		/** DFU bootloader states. Refer to the DFU class specification for information on each state. */

-		enum DFU_State_t

-		{

-			appIDLE                      = 0,

-			appDETACH                    = 1,

-			dfuIDLE                      = 2,

-			dfuDNLOAD_SYNC               = 3,

-			dfuDNBUSY                    = 4,

-			dfuDNLOAD_IDLE               = 5,

-			dfuMANIFEST_SYNC             = 6,

-			dfuMANIFEST                  = 7,

-			dfuMANIFEST_WAIT_RESET       = 8,

-			dfuUPLOAD_IDLE               = 9,

-			dfuERROR	                 = 10

-		};

-

-		/** DFU command status error codes. Refer to the DFU class specification for information on each error code. */

-		enum DFU_Status_t

-		{

-			OK                           = 0,

-			errTARGET                    = 1,

-			errFILE                      = 2,

-			errWRITE                     = 3,

-			errERASE                     = 4,

-			errCHECK_ERASED              = 5,

-			errPROG                      = 6,

-			errVERIFY                    = 7,

-			errADDRESS                   = 8,

-			errNOTDONE                   = 9,

-			errFIRMWARE                  = 10,

-			errVENDOR                    = 11,

-			errUSBR                      = 12,

-			errPOR                       = 13,

-			errUNKNOWN                   = 14,

-			errSTALLEDPKT	             = 15

-		};

-				

-	/* Function Prototypes: */

-		void SetupHardware(void);

-		void ResetHardware(void);

-

-		void EVENT_USB_Device_UnhandledControlRequest(void);

-

-		#if defined(INCLUDE_FROM_BOOTLOADER_C)

-			static void DiscardFillerBytes(uint8_t NumberOfBytes);

-			static void ProcessBootloaderCommand(void);

-			static void LoadStartEndAddresses(void);

-			static void ProcessMemProgCommand(void);

-			static void ProcessMemReadCommand(void);

-			static void ProcessWriteCommand(void);

-			static void ProcessReadCommand(void);

-		#endif

-		

-#endif /* _ARDUINO_USB_DFU_BOOTLOADER_H_ */

diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Board/LEDs.h b/firmwares/atmegaxxu2/arduino-usbdfu/Board/LEDs.h
deleted file mode 100644
index 152e8f5..0000000
--- a/firmwares/atmegaxxu2/arduino-usbdfu/Board/LEDs.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/*

-   Board LEDs driver for the Benito board, from www.dorkbotpdx.org.

-*/

-

-#ifndef __LEDS_ARDUINOUNO_H__

-#define __LEDS_ARDUINOUNO_H__

-

-	/* Includes: */

-		#include <avr/io.h>

-

-/* Enable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			extern "C" {

-		#endif

-

-	/* Preprocessor Checks: */

-		#if !defined(INCLUDE_FROM_LEDS_H)

-			#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.

-		#endif

-

-	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** LED mask for the first LED on the board. */

-			#define LEDS_LED1        (1 << 5)

-

-			/** LED mask for the second LED on the board. */

-			#define LEDS_LED2        (1 << 4)

-

-			/** LED mask for all the LEDs on the board. */

-			#define LEDS_ALL_LEDS    (LEDS_LED1 | LEDS_LED2)

-

-			/** LED mask for the none of the board LEDs */

-			#define LEDS_NO_LEDS     0

-

-		/* Inline Functions: */

-		#if !defined(__DOXYGEN__)

-			static inline void LEDs_Init(void)

-			{

-				DDRD  |= LEDS_ALL_LEDS;

-				PORTD |= LEDS_ALL_LEDS;

-			}

-			

-			static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)

-			{

-				PORTD &= ~LEDMask;

-			}

-

-			static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)

-			{

-				PORTD |= LEDMask;

-			}

-

-			static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)

-			{

-				PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);

-			}

-			

-			static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)

-			{

-				PORTD = ((PORTD | ActiveMask) & ~LEDMask);

-			}

-

-			static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)

-			{

-				PORTD ^= LEDMask;

-			}

-			

-			static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;

-			static inline uint8_t LEDs_GetLEDs(void)

-			{

-				return (PORTD & LEDS_ALL_LEDS);

-			}

-		#endif

-

-	/* Disable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			}

-		#endif

-		

-#endif

diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.c b/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.c
deleted file mode 100644
index 4deaa06..0000000
--- a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special 

- *  computer-readable structures which the host requests upon device enumeration, to determine

- *  the device's capabilities and functions.  

- */

-

-#include "Descriptors.h"

-

-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall

- *  device characteristics, including the supported USB version, control endpoint size and the

- *  number of device configurations. The descriptor is read out by the USB host when the enumeration

- *  process begins.

- */

-USB_Descriptor_Device_t DeviceDescriptor =

-{

-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},

-		

-	.USBSpecification       = VERSION_BCD(01.10),

-	.Class                  = 0x00,

-	.SubClass               = 0x00,

-	.Protocol               = 0x00,

-				

-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,

-		

-	.VendorID               = 0x03EB, // Atmel

-	.ProductID              = PRODUCT_ID_CODE, // MCU-dependent

-	.ReleaseNumber          = 0x0000,

-		

-	.ManufacturerStrIndex   = NO_DESCRIPTOR,

-	.ProductStrIndex        = 0x01,

-	.SerialNumStrIndex      = NO_DESCRIPTOR,

-		

-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS

-};

-

-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage

- *  of the device in one of its supported configurations, including information about any device interfaces

- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting

- *  a configuration so that the host may correctly communicate with the USB device.

- */

-USB_Descriptor_Configuration_t ConfigurationDescriptor =

-{

-	.Config = 

-		{

-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},

-

-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),

-			.TotalInterfaces          = 1,

-

-			.ConfigurationNumber      = 1,

-			.ConfigurationStrIndex    = NO_DESCRIPTOR,

-				

-			.ConfigAttributes         = USB_CONFIG_ATTR_BUSPOWERED,

-			

-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)

-		},

-		

-	.DFU_Interface = 

-		{

-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},

-

-			.InterfaceNumber        = 0,

-			.AlternateSetting       = 0,

-			

-			.TotalEndpoints         = 0,

-				

-			.Class                  = 0xFE,

-			.SubClass               = 0x01,

-			.Protocol               = 0x02,

-

-			.InterfaceStrIndex      = NO_DESCRIPTOR

-		},

-		

-	.DFU_Functional = 

-		{

-			.Header                 = {.Size = sizeof(USB_DFU_Functional_Descriptor_t), .Type = DTYPE_DFUFunctional},

-			

-			.Attributes             = (ATTR_CAN_UPLOAD | ATTR_CAN_DOWNLOAD),

-

-			.DetachTimeout          = 0x0000,

-			.TransferSize           = 0x0c00,

-		

-			.DFUSpecification       = VERSION_BCD(01.01)

-		}

-};

-

-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests

- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate

- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.

- */ 

-USB_Descriptor_String_t LanguageString =

-{

-	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},

-		

-	.UnicodeString          = {LANGUAGE_ID_ENG}

-};

-

-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,

- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device

- *  Descriptor.

- */

-USB_Descriptor_String_t ProductString =

-{

-	#if (ARDUINO_MODEL_PID == ARDUINO_UNO_PID)

-		.Header                 = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String},

-			

-		.UnicodeString          = L"Arduino Uno DFU"

-	#elif (ARDUINO_MODEL_PID == ARDUINO_MEGA2560_PID)

-		.Header                 = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String},

-			

-		.UnicodeString          = L"Arduino Mega 2560 DFU"

-	#endif

-};

-

-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"

- *  documentation) by the application code so that the address and size of a requested descriptor can be given

- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function

- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the

- *  USB host.

- */

-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,

-                                    const uint8_t wIndex,

-                                    void** const DescriptorAddress)

-{

-	const uint8_t  DescriptorType   = (wValue >> 8);

-	const uint8_t  DescriptorNumber = (wValue & 0xFF);

-

-	void*    Address = NULL;

-	uint16_t Size    = NO_DESCRIPTOR;

-

-	switch (DescriptorType)

-	{

-		case DTYPE_Device:

-			Address = &DeviceDescriptor;

-			Size    = sizeof(USB_Descriptor_Device_t);

-			break;

-		case DTYPE_Configuration: 

-			Address = &ConfigurationDescriptor;

-			Size    = sizeof(USB_Descriptor_Configuration_t);

-			break;

-		case DTYPE_String: 

-			if (!(DescriptorNumber))

-			{

-				Address = &LanguageString;

-				Size    = LanguageString.Header.Size;

-			}

-			else

-			{

-				Address = &ProductString;

-				Size    = ProductString.Header.Size;

-			}

-			

-			break;

-	}

-	

-	*DescriptorAddress = Address;

-	return Size;

-}

diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.h b/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.h
deleted file mode 100644
index 6c93f20..0000000
--- a/firmwares/atmegaxxu2/arduino-usbdfu/Descriptors.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for Descriptors.c.

- */

-

-#ifndef _DESCRIPTORS_H_

-#define _DESCRIPTORS_H_

-

-	/* Includes: */

-		#include <LUFA/Drivers/USB/USB.h>

-		

-	/* Product-specific definitions: */

-		#define ARDUINO_UNO_PID				0x0001

-		#define ARDUINO_MEGA2560_PID		0x0010		

-

-	/* Macros: */

-		/** Descriptor type value for a DFU class functional descriptor. */

-		#define DTYPE_DFUFunctional               0x21

-		

-		/** DFU attribute mask, indicating that the DFU device will detach and re-attach when a DFU_DETACH

-		 *  command is issued, rather than the host issuing a USB Reset.

-		 */

-		#define ATTR_WILL_DETATCH                 (1 << 3)

-

-		/** DFU attribute mask, indicating that the DFU device can communicate during the manifestation phase

-		 *  (memory programming phase).

-		 */

-		#define ATTR_MANEFESTATION_TOLLERANT      (1 << 2)

-		

-		/** DFU attribute mask, indicating that the DFU device can accept DFU_UPLOAD requests to send data from

-		 *  the device to the host.

-		 */		

-		#define ATTR_CAN_UPLOAD                   (1 << 1)

-

-		/** DFU attribute mask, indicating that the DFU device can accept DFU_DNLOAD requests to send data from

-		 *  the host to the device.

-		 */		

-		#define ATTR_CAN_DOWNLOAD                 (1 << 0)

-

-		#if defined(__AVR_AT90USB1287__)

-			#define PRODUCT_ID_CODE               0x2FFB

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x97

-			#define AVR_SIGNATURE_3               0x82

-		#elif defined(__AVR_AT90USB1286__)

-			#define PRODUCT_ID_CODE               0x2FFB

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x97

-			#define AVR_SIGNATURE_3               0x82

-		#elif defined(__AVR_AT90USB647__)

-			#define PRODUCT_ID_CODE               0x2FF9

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x96

-			#define AVR_SIGNATURE_3               0x82

-		#elif defined(__AVR_AT90USB646__)

-			#define PRODUCT_ID_CODE               0x2FF9

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x96

-			#define AVR_SIGNATURE_3               0x82

-		#elif defined(__AVR_ATmega32U6__)

-			#define PRODUCT_ID_CODE               0x2FFB

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x95

-			#define AVR_SIGNATURE_3               0x88

-		#elif defined(__AVR_ATmega32U4__)

-			#define PRODUCT_ID_CODE               0x2FF4

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x95

-			#define AVR_SIGNATURE_3               0x87

-		#elif defined(__AVR_ATmega32U2__)

-			#define PRODUCT_ID_CODE               0x2FF0

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x95

-			#define AVR_SIGNATURE_3               0x8A

-		#elif defined(__AVR_ATmega16U4__)

-			#define PRODUCT_ID_CODE               0x2FF3

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x94

-			#define AVR_SIGNATURE_3               0x88

-		#elif defined(__AVR_ATmega16U2__)

-			#define PRODUCT_ID_CODE               0x2FEF

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x94

-			#define AVR_SIGNATURE_3               0x89

-		#elif defined(__AVR_AT90USB162__)

-			#define PRODUCT_ID_CODE               0x2FFA

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x94

-			#define AVR_SIGNATURE_3               0x82

-		#elif defined(__AVR_AT90USB82__)

-			#define PRODUCT_ID_CODE               0x2FEE

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x93

-			#define AVR_SIGNATURE_3               0x89

-		#elif defined(__AVR_ATmega8U2__)

-			#define PRODUCT_ID_CODE               0x2FF7

-			#define AVR_SIGNATURE_1               0x1E

-			#define AVR_SIGNATURE_2               0x93

-			#define AVR_SIGNATURE_3               0x82

-		#else

-			#error The selected AVR part is not currently supported by this bootloader.

-		#endif

-		

-		#if !defined(PRODUCT_ID_CODE)

-			#error Current AVR model is not supported by this bootloader.

-		#endif

-	

-	/* Type Defines: */

-		/** Type define for a DFU class function descriptor. This descriptor gives DFU class information

-		 *  to the host when read, indicating the DFU device's capabilities.

-		 */

-		typedef struct

-		{

-			USB_Descriptor_Header_t               Header; /**< Standard descriptor header structure */

-			

-			uint8_t                               Attributes; /**< DFU device attributes, a mask comprising of the

-			                                                    *  ATTR_* macros listed in this source file

-			                                                    */

-			uint16_t                              DetachTimeout; /**< Timeout in milliseconds between a USB_DETACH

-			                                                        *  command being issued and the device detaching

-			                                                        *  from the USB bus

-			                                                        */																	

-			uint16_t                              TransferSize; /**< Maximum number of bytes the DFU device can accept

-			                                                      *  from the host in a transaction

-			                                                      */			

-			uint16_t                              DFUSpecification;	/**< BCD packed DFU specification number this DFU

-			                                                          *  device complies with

-			                                                          */

-		} USB_DFU_Functional_Descriptor_t;

-	

-		/** Type define for the device configuration descriptor structure. This must be defined in the

-		 *  application code, as the configuration descriptor contains several sub-descriptors which

-		 *  vary between devices, and which describe the device's usage to the host.

-		 */

-		typedef struct

-		{

-			USB_Descriptor_Configuration_Header_t Config;

-			USB_Descriptor_Interface_t            DFU_Interface;

-			USB_DFU_Functional_Descriptor_t       DFU_Functional;

-		} USB_Descriptor_Configuration_t;

-		

-	/* Function Prototypes: */

-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,

-		                                    const uint8_t wIndex,

-		                                    void** const DescriptorAddress) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);

-

-#endif

diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/makefile b/firmwares/atmegaxxu2/arduino-usbdfu/makefile
deleted file mode 100644
index 1fb4ed3..0000000
--- a/firmwares/atmegaxxu2/arduino-usbdfu/makefile
+++ /dev/null
@@ -1,710 +0,0 @@
-# Hey Emacs, this is a -*- makefile -*-

-#----------------------------------------------------------------------------

-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

-#  >> Modified for use with the LUFA project. <<

-#

-# Released to the Public Domain

-#

-# Additional material for this makefile was written by:

-# Peter Fleury

-# Tim Henigan

-# Colin O'Flynn

-# Reiner Patommel

-# Markus Pfaff

-# Sander Pool

-# Frederik Rouleau

-# Carlos Lamas

-# Dean Camera

-# Opendous Inc.

-# Denver Gingerich

-#

-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make coff = Convert ELF to AVR COFF.

-#

-# make extcoff = Convert ELF to AVR Extended COFF.

-#

-# make program = Download the hex file to the device, using avrdude.

-#                Please customize the avrdude settings below first!

-#

-# make doxygen = Generate DoxyGen documentation for the project (must have

-#                DoxyGen installed)

-#

-# make debug = Start either simulavr or avarice as specified for debugging, 

-#              with avr-gdb or avr-insight as the front end for debugging.

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-

-# MCU name

-MCU = atmega8u2

-MCU_AVRDUDE = at90usb82

-

-# Specify the Arduino model using the assigned PID.  This is used by Descriptors.c

-#   to set the product descriptor string (for DFU we must use the PID for each

-#   chip that dfu-bootloader or Flip expect)

-# Uno PID:

-ARDUINO_MODEL_PID = 0x0001

-# Mega 2560 PID:

-#ARDUINO_MODEL_PID = 0x0010

-

-# Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

-# "Board" inside the application directory.

-BOARD  = USER

-

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the 

-#     processor frequency in Hz. You can then use this symbol in your source code to 

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This will be an integer division of F_CLOCK below, as it is sourced by

-#     F_CLOCK after it has run through any CPU prescalers. Note that this value

-#     does not *change* the processor frequency - it should merely be updated to

-#     reflect the processor speed set externally so that the code can use accurate

-#     software delays.

-F_CPU = 16000000

-

-

-# Input clock frequency.

-#     This will define a symbol, F_CLOCK, in all source code files equal to the 

-#     input clock frequency (before any prescaling is performed) in Hz. This value may

-#     differ from F_CPU if prescaling is used on the latter, and is required as the

-#     raw input clock is fed directly to the PLL sections of the AVR for high speed

-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

-#     at the end, this will be done automatically to create a 32-bit value in your

-#     source code.

-#

-#     If no clock division is performed on the input clock inside the AVR (via the

-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_CLOCK = $(F_CPU)

-

-

-# Starting byte address of the bootloader, as a byte address - computed via the formula

-#   BOOT_START = ((TOTAL_FLASH_BYTES - BOOTLOADER_SECTION_SIZE_BYTES) * 1024)

-#

-# Note that the bootloader size and start address given in AVRStudio is in words and not

-# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.

-BOOT_START =  0x1000

-

-

-# Output format. (can be srec, ihex, binary)

-FORMAT = ihex

-

-

-# Target file name (without extension).

-TARGET = Arduino-usbdfu

-

-

-# Object files directory

-#     To put object files in current directory, use a dot (.), do NOT make

-#     this an empty or blank macro!

-OBJDIR = .

-

-

-# Path to the LUFA library

-LUFA_PATH = ../..

-

-

-# LUFA library compile-time options and predefined tokens

-LUFA_OPTS  = -D USB_DEVICE_ONLY

-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0

-LUFA_OPTS += -D CONTROL_ONLY_DEVICE

-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32

-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1

-LUFA_OPTS += -D USE_RAM_DESCRIPTORS

-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

-LUFA_OPTS += -D NO_INTERNAL_SERIAL

-LUFA_OPTS += -D NO_DEVICE_SELF_POWER

-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP

-LUFA_OPTS += -D NO_STREAM_CALLBACKS

-

-

-# Create the LUFA source path variables by including the LUFA root makefile

-include $(LUFA_PATH)/LUFA/makefile

-

-

-# List C source files here. (C dependencies are automatically generated.)

-SRC = $(TARGET).c                                                 \

-	  Descriptors.c                                               \

-	  $(LUFA_SRC_USB)                                             \

-

-

-# List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC = 

-

-

-# List Assembler source files here.

-#     Make them always end in a capital .S.  Files ending in a lowercase .s

-#     will not be considered source files but generated files (assembler

-#     output from the compiler), and will be deleted upon "make clean"!

-#     Even though the DOS/Win* filesystem matches both .s and .S the same,

-#     it will preserve the spelling of the filenames, and gcc itself does

-#     care about how the name is spelled on its command-line.

-ASRC =

-

-

-# Optimization level, can be [0, 1, 2, 3, s]. 

-#     0 = turn off optimization. s = optimize for size.

-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = s

-

-

-# Debugging format.

-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

-#     AVR Studio 4.10 requires dwarf-2.

-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

-DEBUG = dwarf-2

-

-

-# List any extra directories to look for include files here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/

-

-

-# Compiler flag to set the C Standard level.

-#     c89   = "ANSI" C

-#     gnu89 = c89 plus GCC extensions

-#     c99   = ISO C99 standard (not yet fully implemented)

-#     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=c99

-

-

-# Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DARDUINO_MODEL_PID=$(ARDUINO_MODEL_PID)

-CDEFS += -DF_CLOCK=$(F_CLOCK)UL

-CDEFS += -DBOARD=BOARD_$(BOARD)

-CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL

-CDEFS += -DTX_RX_LED_PULSE_MS=3

-CDEFS += $(LUFA_OPTS)

-

-

-# Place -D or -U options here for ASM sources

-ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_CLOCK=$(F_CLOCK)UL

-ADEFS += -DBOARD=BOARD_$(BOARD)

-CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL

-ADEFS += $(LUFA_OPTS)

-

-# Place -D or -U options here for C++ sources

-CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL

-CPPDEFS += -DBOARD=BOARD_$(BOARD)

-CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL

-CPPDEFS += $(LUFA_OPTS)

-#CPPDEFS += -D__STDC_LIMIT_MACROS

-#CPPDEFS += -D__STDC_CONSTANT_MACROS

-

-

-

-#---------------- Compiler Options C ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CFLAGS = -g$(DEBUG)

-CFLAGS += $(CDEFS)

-CFLAGS += -O$(OPT)

-CFLAGS += -funsigned-char

-CFLAGS += -funsigned-bitfields

-CFLAGS += -ffunction-sections

-CFLAGS += -fno-inline-small-functions

-CFLAGS += -fpack-struct

-CFLAGS += -fshort-enums

-CFLAGS += -fno-strict-aliasing

-CFLAGS += -Wall

-CFLAGS += -Wstrict-prototypes

-#CFLAGS += -mshort-calls

-#CFLAGS += -fno-unit-at-a-time

-#CFLAGS += -Wundef

-#CFLAGS += -Wunreachable-code

-#CFLAGS += -Wsign-compare

-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-CFLAGS += $(CSTANDARD)

-

-

-#---------------- Compiler Options C++ ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CPPFLAGS = -g$(DEBUG)

-CPPFLAGS += $(CPPDEFS)

-CPPFLAGS += -O$(OPT)

-CPPFLAGS += -funsigned-char

-CPPFLAGS += -funsigned-bitfields

-CPPFLAGS += -fpack-struct

-CPPFLAGS += -fshort-enums

-CPPFLAGS += -fno-exceptions

-CPPFLAGS += -Wall

-CPPFLAGS += -Wundef

-#CPPFLAGS += -mshort-calls

-#CPPFLAGS += -fno-unit-at-a-time

-#CPPFLAGS += -Wstrict-prototypes

-#CPPFLAGS += -Wunreachable-code

-#CPPFLAGS += -Wsign-compare

-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-#CPPFLAGS += $(CSTANDARD)

-

-

-#---------------- Assembler Options ----------------

-#  -Wa,...:   tell GCC to pass this to the assembler.

-#  -adhlns:   create listing

-#  -gstabs:   have the assembler create line number information; note that

-#             for use in COFF files, additional information about filenames

-#             and function names needs to be present in the assembler source

-#             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 

-#       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

-

-

-#---------------- Library Options ----------------

-# Minimalistic printf version

-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

-

-# Floating point printf version (requires MATH_LIB = -lm below)

-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

-

-# If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB = 

-#PRINTF_LIB = $(PRINTF_LIB_MIN)

-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

-

-

-# Minimalistic scanf version

-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

-

-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

-

-# If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB = 

-#SCANF_LIB = $(SCANF_LIB_MIN)

-#SCANF_LIB = $(SCANF_LIB_FLOAT)

-

-

-MATH_LIB = -lm

-

-

-# List any extra directories to look for libraries here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS = 

-

-

-

-#---------------- External Memory Options ----------------

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# used for variables (.data/.bss) and heap (malloc()).

-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff

-

-# 64 KB of external RAM, starting after internal RAM (ATmega128!),

-# only used for heap (malloc()).

-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff

-

-EXTMEMOPTS =

-

-

-

-#---------------- Linker Options ----------------

-#  -Wl,...:     tell GCC to pass this to linker.

-#    -Map:      create map file

-#    --cref:    add cross reference to  map file

-LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)

-LDFLAGS += -Wl,--relax 

-LDFLAGS += -Wl,--gc-sections

-LDFLAGS += $(EXTMEMOPTS)

-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

-#LDFLAGS += -T linker_script.x

-

-

-

-#---------------- Programming Options (avrdude) ----------------

-

-# Fuse settings for Arduino Uno DFU bootloader project

-AVRDUDE_FUSES = -U efuse:w:0xF4:m -U hfuse:w:0xD9:m -U lfuse:w:0xFF:m 

-

-# Lock settings for Arduino Uno DFU bootloader project

-AVRDUDE_LOCK = -U lock:w:0x0F:m

-

-# Programming hardware

-# Type: avrdude -c ?

-# to get a full listing.

-#

-AVRDUDE_PROGRAMMER = avrispmkii

-

-# com1 = serial port. Use lpt1 to connect to parallel port.

-AVRDUDE_PORT = usb

-

-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

-

-# Uncomment the following if you want avrdude's erase cycle counter.

-# Note that this counter needs to be initialized first using -Yn,

-# see avrdude manual.

-#AVRDUDE_ERASE_COUNTER = -y

-

-# Uncomment the following if you do /not/ wish a verification to be

-# performed after programming the device.

-#AVRDUDE_NO_VERIFY = -V

-

-# Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 

-# to submit bug reports.

-#AVRDUDE_VERBOSE = -v -v

-

-AVRDUDE_FLAGS = -p $(MCU_AVRDUDE) -F -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)

-

-

-

-#---------------- Debugging Options ----------------

-

-# For simulavr only - target MCU frequency.

-DEBUG_MFREQ = $(F_CPU)

-

-# Set the DEBUG_UI to either gdb or insight.

-# DEBUG_UI = gdb

-DEBUG_UI = insight

-

-# Set the debugging back-end to either avarice, simulavr.

-DEBUG_BACKEND = avarice

-#DEBUG_BACKEND = simulavr

-

-# GDB Init Filename.

-GDBINIT_FILE = __avr_gdbinit

-

-# When using avarice settings for the JTAG

-JTAG_DEV = /dev/com1

-

-# Debugging port used to communicate between GDB / avarice / simulavr.

-DEBUG_PORT = 4242

-

-# Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when 

-#     avarice is running on a different computer.

-DEBUG_HOST = localhost

-

-

-

-#============================================================================

-

-

-# Define programs and commands.

-SHELL = sh

-CC = avr-gcc

-OBJCOPY = avr-objcopy

-OBJDUMP = avr-objdump

-SIZE = avr-size

-AR = avr-ar rcs

-NM = avr-nm

-AVRDUDE = avrdude

-REMOVE = rm -f

-REMOVEDIR = rm -rf

-COPY = cp

-WINSHELL = cmd

-

-

-# Define Messages

-# English

-MSG_ERRORS_NONE = Errors: none

-MSG_BEGIN = -------- begin --------

-MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before: 

-MSG_SIZE_AFTER = Size after:

-MSG_COFF = Converting to AVR COFF:

-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

-MSG_FLASH = Creating load file for Flash:

-MSG_EEPROM = Creating load file for EEPROM:

-MSG_EXTENDED_LISTING = Creating Extended Listing:

-MSG_SYMBOL_TABLE = Creating Symbol Table:

-MSG_LINKING = Linking:

-MSG_COMPILING = Compiling C:

-MSG_COMPILING_CPP = Compiling C++:

-MSG_ASSEMBLING = Assembling:

-MSG_CLEANING = Cleaning project:

-MSG_CREATING_LIBRARY = Creating library:

-

-

-

-

-# Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 

-

-# Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 

-

-

-# Compiler flags to generate dependency files.

-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

-

-

-# Combine all necessary flags and optional flags.

-# Add target processor to flags.

-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

-

-

-

-

-

-# Default target.

-all: begin gccversion sizebefore build sizeafter end

-

-# Change the build target to build a HEX file or a library.

-build: elf hex eep lss sym

-#build: lib

-

-

-elf: $(TARGET).elf

-hex: $(TARGET).hex

-eep: $(TARGET).eep

-lss: $(TARGET).lss

-sym: $(TARGET).sym

-LIBNAME=lib$(TARGET).a

-lib: $(LIBNAME)

-

-

-

-# Eye candy.

-# AVR Studio 3.x does not check make's exit code but relies on

-# the following magic strings to be generated by the compile job.

-begin:

-	@echo

-	@echo $(MSG_BEGIN)

-

-end:

-	@echo $(MSG_END)

-	@echo

-

-

-# Display size of file.

-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf

-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )

-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )

-

-

-sizebefore:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-sizeafter:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-

-

-# Display compiler version information.

-gccversion : 

-	@$(CC) --version

-

-

-# Program the device.  

-program: $(TARGET).hex $(TARGET).eep

-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) $(AVRDUDE_FUSES) $(AVRDUDE_LOCK)

-

-

-# Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set 

-#     a breakpoint at main().

-gdb-config: 

-	@$(REMOVE) $(GDBINIT_FILE)

-	@echo define reset >> $(GDBINIT_FILE)

-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

-	@echo end >> $(GDBINIT_FILE)

-	@echo file $(TARGET).elf >> $(GDBINIT_FILE)

-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

-ifeq ($(DEBUG_BACKEND),simulavr)

-	@echo load  >> $(GDBINIT_FILE)

-endif

-	@echo break main >> $(GDBINIT_FILE)

-

-debug: gdb-config $(TARGET).elf

-ifeq ($(DEBUG_BACKEND), avarice)

-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

-	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

-	@$(WINSHELL) /c pause

-

-else

-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)

-endif

-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)

-

-

-

-

-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.

-COFFCONVERT = $(OBJCOPY) --debugging

-COFFCONVERT += --change-section-address .data-0x800000

-COFFCONVERT += --change-section-address .bss-0x800000

-COFFCONVERT += --change-section-address .noinit-0x800000

-COFFCONVERT += --change-section-address .eeprom-0x810000

-

-

-

-coff: $(TARGET).elf

-	@echo

-	@echo $(MSG_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof

-

-

-extcoff: $(TARGET).elf

-	@echo

-	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof

-	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof

-

-

-

-# Create final output files (.hex, .eep) from ELF output file.

-%.hex: %.elf

-	@echo

-	@echo $(MSG_FLASH) $@

-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@

-

-%.eep: %.elf

-	@echo

-	@echo $(MSG_EEPROM) $@

-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

-	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0

-

-# Create extended listing file from ELF output file.

-%.lss: %.elf

-	@echo

-	@echo $(MSG_EXTENDED_LISTING) $@

-	$(OBJDUMP) -h -S -z $< > $@

-

-# Create a symbol table from ELF output file.

-%.sym: %.elf

-	@echo

-	@echo $(MSG_SYMBOL_TABLE) $@

-	$(NM) -n $< > $@

-

-

-

-# Create library from object files.

-.SECONDARY : $(TARGET).a

-.PRECIOUS : $(OBJ)

-%.a: $(OBJ)

-	@echo

-	@echo $(MSG_CREATING_LIBRARY) $@

-	$(AR) $@ $(OBJ)

-

-

-# Link: create ELF output file from object files.

-.SECONDARY : $(TARGET).elf

-.PRECIOUS : $(OBJ)

-%.elf: $(OBJ)

-	@echo

-	@echo $(MSG_LINKING) $@

-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

-

-

-# Compile: create object files from C source files.

-$(OBJDIR)/%.o : %.c

-	@echo

-	@echo $(MSG_COMPILING) $<

-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 

-

-

-# Compile: create object files from C++ source files.

-$(OBJDIR)/%.o : %.cpp

-	@echo

-	@echo $(MSG_COMPILING_CPP) $<

-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 

-

-

-# Compile: create assembler files from C source files.

-%.s : %.c

-	$(CC) -S $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C++ source files.

-%.s : %.cpp

-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

-

-

-# Assemble: create object files from assembler source files.

-$(OBJDIR)/%.o : %.S

-	@echo

-	@echo $(MSG_ASSEMBLING) $<

-	$(CC) -c $(ALL_ASFLAGS) $< -o $@

-

-

-# Create preprocessed source for use in sending a bug report.

-%.i : %.c

-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 

-

-

-# Target: clean project.

-clean: begin clean_list end

-

-clean_list :

-	@echo

-	@echo $(MSG_CLEANING)

-	$(REMOVE) $(TARGET).hex

-	$(REMOVE) $(TARGET).eep

-	$(REMOVE) $(TARGET).cof

-	$(REMOVE) $(TARGET).elf

-	$(REMOVE) $(TARGET).map

-	$(REMOVE) $(TARGET).sym

-	$(REMOVE) $(TARGET).lss

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)

-	$(REMOVE) $(SRC:.c=.s)

-	$(REMOVE) $(SRC:.c=.d)

-	$(REMOVE) $(SRC:.c=.i)

-	$(REMOVEDIR) .dep

-

-doxygen:

-	@echo Generating Project Documentation...

-	@doxygen Doxygen.conf

-	@echo Documentation Generation Complete.

-

-clean_doxygen:

-	rm -rf Documentation

-

-# Create object files directory

-$(shell mkdir $(OBJDIR) 2>/dev/null)

-

-

-# Include the dependency files.

--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

-

-

-# Listing of phony targets.

-.PHONY : all begin finish end sizebefore sizeafter gccversion \

-build elf hex eep lss sym coff extcoff doxygen clean          \

-clean_list clean_doxygen program debug gdb-config

diff --git a/firmwares/atmegaxxu2/arduino-usbdfu/readme.txt b/firmwares/atmegaxxu2/arduino-usbdfu/readme.txt
deleted file mode 100644
index e376679..0000000
--- a/firmwares/atmegaxxu2/arduino-usbdfu/readme.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader:
-1. unpack the source into LUFA's Bootloader directory
-2. set ARDUINO_MODEL_PID in the makefile as appropriate 
-3. do "make clean; make; make program"
-
-Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU".  Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory)
-