Moving ATmegaXXU2 firmwares into subdirectory.

1 files changed, 0 insertions, 220 deletions

diff --git a/firmwares/arduino-usbdfu/Arduino-usbdfu.h b/firmwares/arduino-usbdfu/Arduino-usbdfu.h
deleted file mode 100755
index 4fb236e..0000000
--- a/firmwares/arduino-usbdfu/Arduino-usbdfu.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *

- *  Header file for Arduino-usbdfu.c.

- */

-

-#ifndef _ARDUINO_USB_DFU_BOOTLOADER_H_

-#define _ARDUINO_USB_DFU_BOOTLOADER_H_

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/wdt.h>

-		#include <avr/boot.h>

-		#include <avr/pgmspace.h>

-		#include <avr/eeprom.h>

-		#include <avr/power.h>

-		#include <avr/interrupt.h>

-		#include <stdbool.h>

-	

-		#include "Descriptors.h"

-		

-		#include <LUFA/Drivers/Board/LEDs.h>

-		#include <LUFA/Drivers/USB/USB.h>

-	

-	/* Macros: */

-		/** LED mask for the library LED driver, to indicate TX activity. */

-		#define LEDMASK_TX               LEDS_LED1

-

-		/** LED mask for the library LED driver, to indicate RX activity. */

-		#define LEDMASK_RX               LEDS_LED2

-		

-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */

-		#define LEDMASK_ERROR            (LEDS_LED1 | LEDS_LED2)

-		

-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */

-		#define LEDMASK_BUSY             (LEDS_LED1 | LEDS_LED2)		

-	

-		/** Configuration define. Define this token to true to case the bootloader to reject all memory commands

-		 *  until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this

-		 *  can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are

-		 *  allowed at any time.

-		 */

-//		#define SECURE_MODE              false

-

-		/** Major bootloader version number. */

-		#define BOOTLOADER_VERSION_MINOR 2

-

-		/** Minor bootloader version number. */

-		#define BOOTLOADER_VERSION_REV   0

-

-		/** Complete bootloader version number expressed as a packed byte, constructed from the 

-		 *  two individual bootloader version macros.

-		 */

-		#define BOOTLOADER_VERSION       ((BOOTLOADER_VERSION_MINOR << 4) | BOOTLOADER_VERSION_REV)

-

-		/** First byte of the bootloader identification bytes, used to identify a device's bootloader. */

-		#define BOOTLOADER_ID_BYTE1      0xDC

-

-		/** Second byte of the bootloader identification bytes, used to identify a device's bootloader. */

-		#define BOOTLOADER_ID_BYTE2      0xFB

-		

-		/** Convenience macro, used to determine if the issued command is the given one-byte long command.

-		 *

-		 *  \param[in] dataarr  Command byte array to check against

-		 *  \param[in] cb1      First command byte to check

-		 */

-		#define IS_ONEBYTE_COMMAND(dataarr, cb1)       (dataarr[0] == (cb1))

-

-		/** Convenience macro, used to determine if the issued command is the given two-byte long command.

-		 *

-		 *  \param[in] dataarr  Command byte array to check against

-		 *  \param[in] cb1      First command byte to check

-		 *  \param[in] cb2      Second command byte to check

-		 */

-		#define IS_TWOBYTE_COMMAND(dataarr, cb1, cb2) ((dataarr[0] == (cb1)) && (dataarr[1] == (cb2)))

-	

-		/** Length of the DFU file suffix block, appended to the end of each complete memory write command.

-		 *  The DFU file suffix is currently unused (but is designed to give extra file information, such as

-		 *  a CRC of the complete firmware for error checking) and so is discarded.

-		 */

-		#define DFU_FILE_SUFFIX_SIZE     16

-

-		/** Length of the DFU file filler block, appended to the start of each complete memory write command.

-		 *  Filler bytes are added to the start of each complete memory write command, and must be discarded.

-		 */

-		#define DFU_FILLER_BYTES_SIZE    26

-	

-		/** DFU class command request to detach from the host. */

-		#define DFU_DETATCH              0x00

-

-		/** DFU class command request to send data from the host to the bootloader. */

-		#define DFU_DNLOAD               0x01

-

-		/** DFU class command request to send data from the bootloader to the host. */

-		#define DFU_UPLOAD               0x02

-

-		/** DFU class command request to get the current DFU status and state from the bootloader. */

-		#define DFU_GETSTATUS            0x03

-

-		/** DFU class command request to reset the current DFU status and state variables to their defaults. */

-		#define DFU_CLRSTATUS            0x04

-

-		/** DFU class command request to get the current DFU state of the bootloader. */

-		#define DFU_GETSTATE             0x05

-

-		/** DFU class command request to abort the current multi-request transfer and return to the dfuIDLE state. */

-		#define DFU_ABORT                0x06

-

-		/** DFU command to begin programming the device's memory. */

-		#define COMMAND_PROG_START       0x01

-

-		/** DFU command to begin reading the device's memory. */

-		#define COMMAND_DISP_DATA        0x03

-

-		/** DFU command to issue a write command. */

-		#define COMMAND_WRITE            0x04

-

-		/** DFU command to issue a read command. */

-		#define COMMAND_READ             0x05

-

-		/** DFU command to issue a memory base address change command, to set the current 64KB flash page

-		 *  that subsequent flash operations should use. */

-		#define COMMAND_CHANGE_BASE_ADDR 0x06

-

-	/* Type Defines: */

-		/** Type define for a non-returning function pointer to the loaded application. */

-		typedef void (*AppPtr_t)(void) ATTR_NO_RETURN;

-		

-		/** Type define for a structure containing a complete DFU command issued by the host. */

-		typedef struct

-		{

-			uint8_t  Command; /**< Single byte command to perform, one of the COMMAND_* macro values */

-			uint8_t  Data[5]; /**< Command parameters */

-			uint16_t DataSize; /**< Size of the command parameters */

-		} DFU_Command_t;

-

-	/* Enums: */

-		/** DFU bootloader states. Refer to the DFU class specification for information on each state. */

-		enum DFU_State_t

-		{

-			appIDLE                      = 0,

-			appDETACH                    = 1,

-			dfuIDLE                      = 2,

-			dfuDNLOAD_SYNC               = 3,

-			dfuDNBUSY                    = 4,

-			dfuDNLOAD_IDLE               = 5,

-			dfuMANIFEST_SYNC             = 6,

-			dfuMANIFEST                  = 7,

-			dfuMANIFEST_WAIT_RESET       = 8,

-			dfuUPLOAD_IDLE               = 9,

-			dfuERROR	                 = 10

-		};

-

-		/** DFU command status error codes. Refer to the DFU class specification for information on each error code. */

-		enum DFU_Status_t

-		{

-			OK                           = 0,

-			errTARGET                    = 1,

-			errFILE                      = 2,

-			errWRITE                     = 3,

-			errERASE                     = 4,

-			errCHECK_ERASED              = 5,

-			errPROG                      = 6,

-			errVERIFY                    = 7,

-			errADDRESS                   = 8,

-			errNOTDONE                   = 9,

-			errFIRMWARE                  = 10,

-			errVENDOR                    = 11,

-			errUSBR                      = 12,

-			errPOR                       = 13,

-			errUNKNOWN                   = 14,

-			errSTALLEDPKT	             = 15

-		};

-				

-	/* Function Prototypes: */

-		void SetupHardware(void);

-		void ResetHardware(void);

-

-		void EVENT_USB_Device_UnhandledControlRequest(void);

-

-		#if defined(INCLUDE_FROM_BOOTLOADER_C)

-			static void DiscardFillerBytes(uint8_t NumberOfBytes);

-			static void ProcessBootloaderCommand(void);

-			static void LoadStartEndAddresses(void);

-			static void ProcessMemProgCommand(void);

-			static void ProcessMemReadCommand(void);

-			static void ProcessWriteCommand(void);

-			static void ProcessReadCommand(void);

-		#endif

-		

-#endif /* _ARDUINO_USB_DFU_BOOTLOADER_H_ */