First integration of the Arduino code in Processing 5503: PreProcessor and Compiler have been integrated with changes to the Sketch.

Compilation still has problems (Thread error on success, and can't handle non-pde files in a sketch).
Modified the Mac OS X make.sh to copy the hardware, avr tools, and example over.
Removing some of the antlr stuff.  
Disabling the Commander (command-line execution) for now.
Added Library, LibraryManager, and Target.
Added support for prefixed preferences (e.g. for boards and programmers).

23 files changed, 3123 insertions, 0 deletions

diff --git a/cores/arduino/HardwareSerial.cpp b/cores/arduino/HardwareSerial.cpp
new file mode 100755
index 0000000..f8a959a
--- /dev/null
+++ b/cores/arduino/HardwareSerial.cpp
@@ -0,0 +1,191 @@
+/*
+  HardwareSerial.cpp - Hardware serial library for Wiring
+  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+  
+  Modified 23 November 2006 by David A. Mellis
+*/
+
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include "wiring.h"
+#include "wiring_private.h"
+
+#include "HardwareSerial.h"
+
+// Define constants and variables for buffering incoming serial data.  We're
+// using a ring buffer (I think), in which rx_buffer_head is the index of the
+// location to which to write the next incoming character and rx_buffer_tail
+// is the index of the location from which to read.
+#define RX_BUFFER_SIZE 128
+
+struct ring_buffer {
+  unsigned char buffer[RX_BUFFER_SIZE];
+  int head;
+  int tail;
+};
+
+ring_buffer rx_buffer = { { 0 }, 0, 0 };
+
+#if defined(__AVR_ATmega1280__)
+ring_buffer rx_buffer1 = { { 0 }, 0, 0 };
+ring_buffer rx_buffer2 = { { 0 }, 0, 0 };
+ring_buffer rx_buffer3 = { { 0 }, 0, 0 };
+#endif
+
+inline void store_char(unsigned char c, ring_buffer *rx_buffer)
+{
+	int i = (rx_buffer->head + 1) % RX_BUFFER_SIZE;
+
+	// if we should be storing the received character into the location
+	// just before the tail (meaning that the head would advance to the
+	// current location of the tail), we're about to overflow the buffer
+	// and so we don't write the character or advance the head.
+	if (i != rx_buffer->tail) {
+		rx_buffer->buffer[rx_buffer->head] = c;
+		rx_buffer->head = i;
+	}
+}
+
+#if defined(__AVR_ATmega1280__)
+
+SIGNAL(SIG_USART0_RECV)
+{
+	unsigned char c = UDR0;
+  store_char(c, &rx_buffer);
+}
+
+SIGNAL(SIG_USART1_RECV)
+{
+	unsigned char c = UDR1;
+  store_char(c, &rx_buffer1);
+}
+
+SIGNAL(SIG_USART2_RECV)
+{
+	unsigned char c = UDR2;
+  store_char(c, &rx_buffer2);
+}
+
+SIGNAL(SIG_USART3_RECV)
+{
+	unsigned char c = UDR3;
+  store_char(c, &rx_buffer3);
+}
+
+#else
+
+#if defined(__AVR_ATmega8__)
+SIGNAL(SIG_UART_RECV)
+#else
+SIGNAL(USART_RX_vect)
+#endif
+{
+#if defined(__AVR_ATmega8__)
+	unsigned char c = UDR;
+#else
+	unsigned char c = UDR0;
+#endif
+  store_char(c, &rx_buffer);
+}
+
+#endif
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+HardwareSerial::HardwareSerial(ring_buffer *rx_buffer,
+  volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+  volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+  volatile uint8_t *udr,
+  uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre)
+{
+  _rx_buffer = rx_buffer;
+  _ubrrh = ubrrh;
+  _ubrrl = ubrrl;
+  _ucsra = ucsra;
+  _ucsrb = ucsrb;
+  _udr = udr;
+  _rxen = rxen;
+  _txen = txen;
+  _rxcie = rxcie;
+  _udre = udre;
+}
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+void HardwareSerial::begin(long speed)
+{
+	*_ubrrh = ((F_CPU / 16 + speed / 2) / speed - 1) >> 8;
+	*_ubrrl = ((F_CPU / 16 + speed / 2) / speed - 1);
+  sbi(*_ucsrb, _rxen);
+  sbi(*_ucsrb, _txen);
+  sbi(*_ucsrb, _rxcie);
+}
+
+uint8_t HardwareSerial::available(void)
+{
+	return (RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE;
+}
+
+int HardwareSerial::read(void)
+{
+	// if the head isn't ahead of the tail, we don't have any characters
+	if (_rx_buffer->head == _rx_buffer->tail) {
+		return -1;
+	} else {
+		unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
+		_rx_buffer->tail = (_rx_buffer->tail + 1) % RX_BUFFER_SIZE;
+		return c;
+	}
+}
+
+void HardwareSerial::flush()
+{
+	// don't reverse this or there may be problems if the RX interrupt
+	// occurs after reading the value of rx_buffer_head but before writing
+	// the value to rx_buffer_tail; the previous value of rx_buffer_head
+	// may be written to rx_buffer_tail, making it appear as if the buffer
+	// don't reverse this or there may be problems if the RX interrupt
+	// occurs after reading the value of rx_buffer_head but before writing
+	// the value to rx_buffer_tail; the previous value of rx_buffer_head
+	// may be written to rx_buffer_tail, making it appear as if the buffer
+	// were full, not empty.
+	_rx_buffer->head = _rx_buffer->tail;
+}
+
+void HardwareSerial::write(uint8_t c)
+{
+	while (!((*_ucsra) & (1 << _udre)))
+		;
+
+	*_udr = c;
+}
+
+// Preinstantiate Objects //////////////////////////////////////////////////////
+
+#if defined(__AVR_ATmega8__)
+HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE);
+#else
+HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0);
+#endif
+
+#if defined(__AVR_ATmega1280__)
+HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1);
+HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2);
+HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3);
+#endif
+
diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h
new file mode 100755
index 0000000..8610f5a
--- /dev/null
+++ b/cores/arduino/HardwareSerial.h
@@ -0,0 +1,65 @@
+/*
+  HardwareSerial.h - Hardware serial library for Wiring
+  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef HardwareSerial_h
+#define HardwareSerial_h
+
+#include <inttypes.h>
+
+#include "Print.h"
+
+struct ring_buffer;
+
+class HardwareSerial : public Print
+{
+  private:
+    ring_buffer *_rx_buffer;
+    volatile uint8_t *_ubrrh;
+    volatile uint8_t *_ubrrl;
+    volatile uint8_t *_ucsra;
+    volatile uint8_t *_ucsrb;
+    volatile uint8_t *_udr;
+    uint8_t _rxen;
+    uint8_t _txen;
+    uint8_t _rxcie;
+    uint8_t _udre;
+  public:
+    HardwareSerial(ring_buffer *rx_buffer,
+      volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+      volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+      volatile uint8_t *udr,
+      uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre);
+    void begin(long);
+    uint8_t available(void);
+    int read(void);
+    void flush(void);
+    virtual void write(uint8_t);
+    using Print::write; // pull in write(str) and write(buf, size) from Print
+};
+
+extern HardwareSerial Serial;
+
+#if defined(__AVR_ATmega1280__)
+extern HardwareSerial Serial1;
+extern HardwareSerial Serial2;
+extern HardwareSerial Serial3;
+#endif
+
+#endif
+
diff --git a/cores/arduino/Makefile b/cores/arduino/Makefile
new file mode 100755
index 0000000..30ea655
--- /dev/null
+++ b/cores/arduino/Makefile
@@ -0,0 +1,243 @@
+# Arduino 0015 Makefile
+# Arduino adaptation by mellis, eighthave, oli.keller
+#
+# This makefile allows you to build sketches from the command line
+# without the Arduino environment (or Java).
+#
+# Detailed instructions for using the makefile:
+#
+#  1. Copy this file into the folder with your sketch. There should be a
+#     file with the same name as the folder and with the extension .pde
+#     (e.g. foo.pde in the foo/ folder).
+#
+#  2. Modify the line containg "INSTALL_DIR" to point to the directory that
+#     contains the Arduino installation (for example, under Mac OS X, this
+#     might be /Applications/arduino-0012).
+#
+#  3. Modify the line containing "PORT" to refer to the filename
+#     representing the USB or serial connection to your Arduino board
+#     (e.g. PORT = /dev/tty.USB0).  If the exact name of this file
+#     changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*).
+#
+#  4. Set the line containing "MCU" to match your board's processor. 
+#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
+#     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
+#     change F_CPU to 8000000.
+#
+#  5. At the command line, change to the directory containing your
+#     program's file and the makefile.
+#
+#  6. Type "make" and press enter to compile/verify your program.
+#
+#  7. Type "make upload", reset your Arduino board, and press enter to
+#     upload your program to the Arduino board.
+#
+# $Id$
+
+TARGET = $(notdir $(CURDIR))
+INSTALL_DIR = ../../..
+PORT = /dev/tty.usb*
+UPLOAD_RATE = 19200
+AVRDUDE_PROGRAMMER = stk500v1
+MCU = atmega168
+F_CPU = 16000000
+
+############################################################################
+# Below here nothing should be changed...
+
+ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino
+AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin
+SRC =  $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \
+$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
+$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \
+$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c
+CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp \
+$(ARDUINO)/Print.cpp
+FORMAT = ihex
+
+
+# Name of this Makefile (used for "make depend").
+MAKEFILE = Makefile
+
+# Debugging format.
+# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
+# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
+DEBUG = stabs
+
+OPT = s
+
+# Place -D or -U options here
+CDEFS = -DF_CPU=$(F_CPU)
+CXXDEFS = -DF_CPU=$(F_CPU)
+
+# Place -I options here
+CINCS = -I$(ARDUINO)
+CXXINCS = -I$(ARDUINO)
+
+# Compiler flag to set the C Standard level.
+# c89   - "ANSI" C
+# gnu89 - c89 plus GCC extensions
+# c99   - ISO C99 standard (not yet fully implemented)
+# gnu99 - c99 plus GCC extensions
+CSTANDARD = -std=gnu99
+CDEBUG = -g$(DEBUG)
+CWARN = -Wall -Wstrict-prototypes
+CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
+#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
+
+CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
+CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT)
+#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
+LDFLAGS = -lm
+
+
+# Programming support using avrdude. Settings and variables.
+AVRDUDE_PORT = $(PORT)
+AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
+AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \
+-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
+-b $(UPLOAD_RATE)
+
+# Program settings
+CC = $(AVR_TOOLS_PATH)/avr-gcc
+CXX = $(AVR_TOOLS_PATH)/avr-g++
+OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy
+OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump
+AR  = $(AVR_TOOLS_PATH)/avr-ar
+SIZE = $(AVR_TOOLS_PATH)/avr-size
+NM = $(AVR_TOOLS_PATH)/avr-nm
+AVRDUDE = $(AVR_TOOLS_PATH)/avrdude
+REMOVE = rm -f
+MV = mv -f
+
+# Define all object files.
+OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) 
+
+# Define all listing files.
+LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
+ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+
+# Default target.
+all: applet_files build sizeafter
+
+build: elf hex 
+
+applet_files: $(TARGET).pde
+	# Here is the "preprocessing".
+	# It creates a .cpp file based with the same name as the .pde file.
+	# On top of the new .cpp file comes the WProgram.h header.
+	# At the end there is a generic main() function attached.
+	# Then the .cpp file will be compiled. Errors during compile will
+	# refer to this new, automatically generated, file. 
+	# Not the original .pde file you actually edit...
+	test -d applet || mkdir applet
+	echo '#include "WProgram.h"' > applet/$(TARGET).cpp
+	cat $(TARGET).pde >> applet/$(TARGET).cpp
+	cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp
+
+elf: applet/$(TARGET).elf
+hex: applet/$(TARGET).hex
+eep: applet/$(TARGET).eep
+lss: applet/$(TARGET).lss 
+sym: applet/$(TARGET).sym
+
+# Program the device.  
+upload: applet/$(TARGET).hex
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
+
+
+	# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex
+ELFSIZE = $(SIZE)  applet/$(TARGET).elf
+sizebefore:
+	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
+
+sizeafter:
+	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT=$(OBJCOPY) --debugging \
+--change-section-address .data-0x800000 \
+--change-section-address .bss-0x800000 \
+--change-section-address .noinit-0x800000 \
+--change-section-address .eeprom-0x810000 
+
+
+coff: applet/$(TARGET).elf
+	$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof
+
+
+extcoff: $(TARGET).elf
+	$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof
+
+
+.SUFFIXES: .elf .hex .eep .lss .sym
+
+.elf.hex:
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+.elf.eep:
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+
+# Create extended listing file from ELF output file.
+.elf.lss:
+	$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+.elf.sym:
+	$(NM) -n $< > $@
+
+	# Link: create ELF output file from library.
+applet/$(TARGET).elf: $(TARGET).pde applet/core.a 
+	$(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
+
+applet/core.a: $(OBJ)
+	@for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done
+
+
+
+# Compile: create object files from C++ source files.
+.cpp.o:
+	$(CXX) -c $(ALL_CXXFLAGS) $< -o $@ 
+
+# Compile: create object files from C source files.
+.c.o:
+	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
+
+
+# Compile: create assembler files from C source files.
+.c.s:
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+
+# Assemble: create object files from assembler source files.
+.S.o:
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+
+# Automatic dependencies
+%.d: %.c
+	$(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
+
+%.d: %.cpp
+	$(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
+
+
+# Target: clean project.
+clean:
+	$(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
+	applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \
+	$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
+
+.PHONY:	all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter
+
+include $(SRC:.c=.d)
+include $(CXXSRC:.cpp=.d)
diff --git a/cores/arduino/Print.cpp b/cores/arduino/Print.cpp
new file mode 100755
index 0000000..74d0e5b
--- /dev/null
+++ b/cores/arduino/Print.cpp
@@ -0,0 +1,215 @@
+/*
+ Print.cpp - Base class that provides print() and println()
+ Copyright (c) 2008 David A. Mellis.  All right reserved.
+ 
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ 
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ Lesser General Public License for more details.
+ 
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ 
+ Modified 23 November 2006 by David A. Mellis
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <math.h>
+#include "wiring.h"
+
+#include "Print.h"
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+/* default implementation: may be overridden */
+void Print::write(const char *str)
+{
+  while (*str)
+    write(*str++);
+}
+
+/* default implementation: may be overridden */
+void Print::write(const uint8_t *buffer, size_t size)
+{
+  while (size--)
+    write(*buffer++);
+}
+
+void Print::print(uint8_t b)
+{
+  this->write(b);
+}
+
+void Print::print(char c)
+{
+  print((byte) c);
+}
+
+void Print::print(const char str[])
+{
+  write(str);
+}
+
+void Print::print(int n)
+{
+  print((long) n);
+}
+
+void Print::print(unsigned int n)
+{
+  print((unsigned long) n);
+}
+
+void Print::print(long n)
+{
+  if (n < 0) {
+    print('-');
+    n = -n;
+  }
+  printNumber(n, 10);
+}
+
+void Print::print(unsigned long n)
+{
+  printNumber(n, 10);
+}
+
+void Print::print(long n, int base)
+{
+  if (base == 0)
+    print((char) n);
+  else if (base == 10)
+    print(n);
+  else
+    printNumber(n, base);
+}
+
+void Print::print(double n)
+{
+  printFloat(n, 2);
+}
+
+void Print::println(void)
+{
+  print('\r');
+  print('\n');  
+}
+
+void Print::println(char c)
+{
+  print(c);
+  println();  
+}
+
+void Print::println(const char c[])
+{
+  print(c);
+  println();
+}
+
+void Print::println(uint8_t b)
+{
+  print(b);
+  println();
+}
+
+void Print::println(int n)
+{
+  print(n);
+  println();
+}
+
+void Print::println(unsigned int n)
+{
+  print(n);
+  println();
+}
+
+void Print::println(long n)
+{
+  print(n);
+  println();  
+}
+
+void Print::println(unsigned long n)
+{
+  print(n);
+  println();  
+}
+
+void Print::println(long n, int base)
+{
+  print(n, base);
+  println();
+}
+
+void Print::println(double n)
+{
+  print(n);
+  println();
+}
+
+// Private Methods /////////////////////////////////////////////////////////////
+
+void Print::printNumber(unsigned long n, uint8_t base)
+{
+  unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. 
+  unsigned long i = 0;
+
+  if (n == 0) {
+    print('0');
+    return;
+  } 
+
+  while (n > 0) {
+    buf[i++] = n % base;
+    n /= base;
+  }
+
+  for (; i > 0; i--)
+    print((char) (buf[i - 1] < 10 ?
+      '0' + buf[i - 1] :
+      'A' + buf[i - 1] - 10));
+}
+
+void Print::printFloat(double number, uint8_t digits) 
+{ 
+  // Handle negative numbers
+  if (number < 0.0)
+  {
+     print('-');
+     number = -number;
+  }
+
+  // Round correctly so that print(1.999, 2) prints as "2.00"
+  double rounding = 0.5;
+  for (uint8_t i=0; i<digits; ++i)
+    rounding /= 10.0;
+  
+  number += rounding;
+
+  // Extract the integer part of the number and print it
+  unsigned long int_part = (unsigned long)number;
+  double remainder = number - (double)int_part;
+  print(int_part);
+
+  // Print the decimal point, but only if there are digits beyond
+  if (digits > 0)
+    print("."); 
+
+  // Extract digits from the remainder one at a time
+  while (digits-- > 0)
+  {
+    remainder *= 10.0;
+    int toPrint = int(remainder);
+    print(toPrint);
+    remainder -= toPrint; 
+  } 
+}
diff --git a/cores/arduino/Print.h b/cores/arduino/Print.h
new file mode 100755
index 0000000..a69e85d
--- /dev/null
+++ b/cores/arduino/Print.h
@@ -0,0 +1,62 @@
+/*
+  Print.h - Base class that provides print() and println()
+  Copyright (c) 2008 David A. Mellis.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef Print_h
+#define Print_h
+
+#include <inttypes.h>
+#include <stdio.h> // for size_t
+
+#define DEC 10
+#define HEX 16
+#define OCT 8
+#define BIN 2
+#define BYTE 0
+
+class Print
+{
+  private:
+    void printNumber(unsigned long, uint8_t);
+    void printFloat(double, uint8_t);
+  public:
+    virtual void write(uint8_t) = 0;
+    virtual void write(const char *str);
+    virtual void write(const uint8_t *buffer, size_t size);
+    void print(char);
+    void print(const char[]);
+    void print(uint8_t);
+    void print(int);
+    void print(unsigned int);
+    void print(long);
+    void print(unsigned long);
+    void print(long, int);
+    void print(double);
+    void println(void);
+    void println(char);
+    void println(const char[]);
+    void println(uint8_t);
+    void println(int);
+    void println(unsigned int);
+    void println(long);
+    void println(unsigned long);
+    void println(long, int);
+    void println(double);
+};
+
+#endif
diff --git a/cores/arduino/WConstants.h b/cores/arduino/WConstants.h
new file mode 100644
index 0000000..3e19ac4
--- /dev/null
+++ b/cores/arduino/WConstants.h
@@ -0,0 +1 @@
+#include "wiring.h"
diff --git a/cores/arduino/WInterrupts.c b/cores/arduino/WInterrupts.c
new file mode 100755
index 0000000..69a78b0
--- /dev/null
+++ b/cores/arduino/WInterrupts.c
@@ -0,0 +1,215 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+  Part of the Wiring project - http://wiring.uniandes.edu.co
+
+  Copyright (c) 2004-05 Hernando Barragan
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+  
+  Modified 24 November 2006 by David A. Mellis
+*/
+
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include <stdio.h>
+
+#include "WConstants.h"
+#include "wiring_private.h"
+
+volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
+// volatile static voidFuncPtr twiIntFunc;
+
+#if defined(__AVR_ATmega8__)
+#define EICRA MCUCR
+#define EIMSK GICR
+#endif
+
+void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
+  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+    intFunc[interruptNum] = userFunc;
+    
+    // Configure the interrupt mode (trigger on low input, any change, rising
+    // edge, or falling edge).  The mode constants were chosen to correspond
+    // to the configuration bits in the hardware register, so we simply shift
+    // the mode into place.
+      
+    // Enable the interrupt.
+      
+    switch (interruptNum) {
+#if defined(__AVR_ATmega1280__)
+    case 2:
+      EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      EIMSK |= (1 << INT0);
+      break;
+    case 3:
+      EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      EIMSK |= (1 << INT1);
+      break;
+    case 4:
+      EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+      EIMSK |= (1 << INT2);
+      break;
+    case 5:
+      EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
+      EIMSK |= (1 << INT3);
+      break;
+    case 0:
+      EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
+      EIMSK |= (1 << INT4);
+      break;
+    case 1:
+      EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
+      EIMSK |= (1 << INT5);
+      break;
+    case 6:
+      EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
+      EIMSK |= (1 << INT6);
+      break;
+    case 7:
+      EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
+      EIMSK |= (1 << INT7);
+      break;
+#else
+    case 0:
+      EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+      EIMSK |= (1 << INT0);
+      break;
+    case 1:
+      EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+      EIMSK |= (1 << INT1);
+      break;
+#endif
+    }
+  }
+}
+
+void detachInterrupt(uint8_t interruptNum) {
+  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+    // Disable the interrupt.  (We can't assume that interruptNum is equal
+    // to the number of the EIMSK bit to clear, as this isn't true on the 
+    // ATmega8.  There, INT0 is 6 and INT1 is 7.)
+    switch (interruptNum) {
+#if defined(__AVR_ATmega1280__)
+    case 2:
+      EIMSK &= ~(1 << INT0);
+      break;
+    case 3:
+      EIMSK &= ~(1 << INT1);
+      break;
+    case 4:
+      EIMSK &= ~(1 << INT2);
+      break;
+    case 5:
+      EIMSK &= ~(1 << INT3);
+      break;
+    case 0:
+      EIMSK &= ~(1 << INT4);
+      break;
+    case 1:
+      EIMSK &= ~(1 << INT5);
+      break;
+    case 6:
+      EIMSK &= ~(1 << INT6);
+      break;
+    case 7:
+      EIMSK &= ~(1 << INT7);
+      break;
+#else
+    case 0:
+      EIMSK &= ~(1 << INT0);
+      break;
+    case 1:
+      EIMSK &= ~(1 << INT1);
+      break;
+#endif
+    }
+      
+    intFunc[interruptNum] = 0;
+  }
+}
+
+/*
+void attachInterruptTwi(void (*userFunc)(void) ) {
+  twiIntFunc = userFunc;
+}
+*/
+
+#if defined(__AVR_ATmega1280__)
+
+SIGNAL(INT0_vect) {
+  if(intFunc[EXTERNAL_INT_2])
+    intFunc[EXTERNAL_INT_2]();
+}
+
+SIGNAL(INT1_vect) {
+  if(intFunc[EXTERNAL_INT_3])
+    intFunc[EXTERNAL_INT_3]();
+}
+
+SIGNAL(INT2_vect) {
+  if(intFunc[EXTERNAL_INT_4])
+    intFunc[EXTERNAL_INT_4]();
+}
+
+SIGNAL(INT3_vect) {
+  if(intFunc[EXTERNAL_INT_5])
+    intFunc[EXTERNAL_INT_5]();
+}
+
+SIGNAL(INT4_vect) {
+  if(intFunc[EXTERNAL_INT_0])
+    intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT5_vect) {
+  if(intFunc[EXTERNAL_INT_1])
+    intFunc[EXTERNAL_INT_1]();
+}
+
+SIGNAL(INT6_vect) {
+  if(intFunc[EXTERNAL_INT_6])
+    intFunc[EXTERNAL_INT_6]();
+}
+
+SIGNAL(INT7_vect) {
+  if(intFunc[EXTERNAL_INT_7])
+    intFunc[EXTERNAL_INT_7]();
+}
+
+#else
+
+SIGNAL(INT0_vect) {
+  if(intFunc[EXTERNAL_INT_0])
+    intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT1_vect) {
+  if(intFunc[EXTERNAL_INT_1])
+    intFunc[EXTERNAL_INT_1]();
+}
+
+#endif
+
+/*
+SIGNAL(SIG_2WIRE_SERIAL) {
+  if(twiIntFunc)
+    twiIntFunc();
+}
+*/
+
diff --git a/cores/arduino/WMath.cpp b/cores/arduino/WMath.cpp
new file mode 100644
index 0000000..2120c4c
--- /dev/null
+++ b/cores/arduino/WMath.cpp
@@ -0,0 +1,60 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+  Part of the Wiring project - http://wiring.org.co
+  Copyright (c) 2004-06 Hernando Barragan
+  Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/
+  
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+  
+  $Id$
+*/
+
+extern "C" {
+  #include "stdlib.h"
+}
+
+void randomSeed(unsigned int seed)
+{
+  if (seed != 0) {
+    srandom(seed);
+  }
+}
+
+long random(long howbig)
+{
+  if (howbig == 0) {
+    return 0;
+  }
+  return random() % howbig;
+}
+
+long random(long howsmall, long howbig)
+{
+  if (howsmall >= howbig) {
+    return howsmall;
+  }
+  long diff = howbig - howsmall;
+  return random(diff) + howsmall;
+}
+
+long map(long x, long in_min, long in_max, long out_min, long out_max)
+{
+  return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+}
+
+unsigned int makeWord(unsigned int w) { return w; }
+unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; }
\ No newline at end of file
diff --git a/cores/arduino/WProgram.h b/cores/arduino/WProgram.h
new file mode 100755
index 0000000..fc14923
--- /dev/null
+++ b/cores/arduino/WProgram.h
@@ -0,0 +1,29 @@
+#ifndef WProgram_h
+#define WProgram_h
+
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+
+#include <avr/interrupt.h>
+
+#include "wiring.h"
+
+#ifdef __cplusplus
+#include "HardwareSerial.h"
+
+uint16_t makeWord(uint16_t w);
+uint16_t makeWord(byte h, byte l);
+
+#define word(...) makeWord(__VA_ARGS__)
+
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
+
+// WMath prototypes
+long random(long);
+long random(long, long);
+void randomSeed(unsigned int);
+long map(long, long, long, long, long);
+#endif
+
+#endif
\ No newline at end of file
diff --git a/cores/arduino/binary.h b/cores/arduino/binary.h
new file mode 100644
index 0000000..af14980
--- /dev/null
+++ b/cores/arduino/binary.h
@@ -0,0 +1,515 @@
+#ifndef Binary_h
+#define Binary_h
+
+#define B0 0
+#define B00 0
+#define B000 0
+#define B0000 0
+#define B00000 0
+#define B000000 0
+#define B0000000 0
+#define B00000000 0
+#define B1 1
+#define B01 1
+#define B001 1
+#define B0001 1
+#define B00001 1
+#define B000001 1
+#define B0000001 1
+#define B00000001 1
+#define B10 2
+#define B010 2
+#define B0010 2
+#define B00010 2
+#define B000010 2
+#define B0000010 2
+#define B00000010 2
+#define B11 3
+#define B011 3
+#define B0011 3
+#define B00011 3
+#define B000011 3
+#define B0000011 3
+#define B00000011 3
+#define B100 4
+#define B0100 4
+#define B00100 4
+#define B000100 4
+#define B0000100 4
+#define B00000100 4
+#define B101 5
+#define B0101 5
+#define B00101 5
+#define B000101 5
+#define B0000101 5
+#define B00000101 5
+#define B110 6
+#define B0110 6
+#define B00110 6
+#define B000110 6
+#define B0000110 6
+#define B00000110 6
+#define B111 7
+#define B0111 7
+#define B00111 7
+#define B000111 7
+#define B0000111 7
+#define B00000111 7
+#define B1000 8
+#define B01000 8
+#define B001000 8
+#define B0001000 8
+#define B00001000 8
+#define B1001 9
+#define B01001 9
+#define B001001 9
+#define B0001001 9
+#define B00001001 9
+#define B1010 10
+#define B01010 10
+#define B001010 10
+#define B0001010 10
+#define B00001010 10
+#define B1011 11
+#define B01011 11
+#define B001011 11
+#define B0001011 11
+#define B00001011 11
+#define B1100 12
+#define B01100 12
+#define B001100 12
+#define B0001100 12
+#define B00001100 12
+#define B1101 13
+#define B01101 13
+#define B001101 13
+#define B0001101 13
+#define B00001101 13
+#define B1110 14
+#define B01110 14
+#define B001110 14
+#define B0001110 14
+#define B00001110 14
+#define B1111 15
+#define B01111 15
+#define B001111 15
+#define B0001111 15
+#define B00001111 15
+#define B10000 16
+#define B010000 16
+#define B0010000 16
+#define B00010000 16
+#define B10001 17
+#define B010001 17
+#define B0010001 17
+#define B00010001 17
+#define B10010 18
+#define B010010 18
+#define B0010010 18
+#define B00010010 18
+#define B10011 19
+#define B010011 19
+#define B0010011 19
+#define B00010011 19
+#define B10100 20
+#define B010100 20
+#define B0010100 20
+#define B00010100 20
+#define B10101 21
+#define B010101 21
+#define B0010101 21
+#define B00010101 21
+#define B10110 22
+#define B010110 22
+#define B0010110 22
+#define B00010110 22
+#define B10111 23
+#define B010111 23
+#define B0010111 23
+#define B00010111 23
+#define B11000 24
+#define B011000 24
+#define B0011000 24
+#define B00011000 24
+#define B11001 25
+#define B011001 25
+#define B0011001 25
+#define B00011001 25
+#define B11010 26
+#define B011010 26
+#define B0011010 26
+#define B00011010 26
+#define B11011 27
+#define B011011 27
+#define B0011011 27
+#define B00011011 27
+#define B11100 28
+#define B011100 28
+#define B0011100 28
+#define B00011100 28
+#define B11101 29
+#define B011101 29
+#define B0011101 29
+#define B00011101 29
+#define B11110 30
+#define B011110 30
+#define B0011110 30
+#define B00011110 30
+#define B11111 31
+#define B011111 31
+#define B0011111 31
+#define B00011111 31
+#define B100000 32
+#define B0100000 32
+#define B00100000 32
+#define B100001 33
+#define B0100001 33
+#define B00100001 33
+#define B100010 34
+#define B0100010 34
+#define B00100010 34
+#define B100011 35
+#define B0100011 35
+#define B00100011 35
+#define B100100 36
+#define B0100100 36
+#define B00100100 36
+#define B100101 37
+#define B0100101 37
+#define B00100101 37
+#define B100110 38
+#define B0100110 38
+#define B00100110 38
+#define B100111 39
+#define B0100111 39
+#define B00100111 39
+#define B101000 40
+#define B0101000 40
+#define B00101000 40
+#define B101001 41
+#define B0101001 41
+#define B00101001 41
+#define B101010 42
+#define B0101010 42
+#define B00101010 42
+#define B101011 43
+#define B0101011 43
+#define B00101011 43
+#define B101100 44
+#define B0101100 44
+#define B00101100 44
+#define B101101 45
+#define B0101101 45
+#define B00101101 45
+#define B101110 46
+#define B0101110 46
+#define B00101110 46
+#define B101111 47
+#define B0101111 47
+#define B00101111 47
+#define B110000 48
+#define B0110000 48
+#define B00110000 48
+#define B110001 49
+#define B0110001 49
+#define B00110001 49
+#define B110010 50
+#define B0110010 50
+#define B00110010 50
+#define B110011 51
+#define B0110011 51
+#define B00110011 51
+#define B110100 52
+#define B0110100 52
+#define B00110100 52
+#define B110101 53
+#define B0110101 53
+#define B00110101 53
+#define B110110 54
+#define B0110110 54
+#define B00110110 54
+#define B110111 55
+#define B0110111 55
+#define B00110111 55
+#define B111000 56
+#define B0111000 56
+#define B00111000 56
+#define B111001 57
+#define B0111001 57
+#define B00111001 57
+#define B111010 58
+#define B0111010 58
+#define B00111010 58
+#define B111011 59
+#define B0111011 59
+#define B00111011 59
+#define B111100 60
+#define B0111100 60
+#define B00111100 60
+#define B111101 61
+#define B0111101 61
+#define B00111101 61
+#define B111110 62
+#define B0111110 62
+#define B00111110 62
+#define B111111 63
+#define B0111111 63
+#define B00111111 63
+#define B1000000 64
+#define B01000000 64
+#define B1000001 65
+#define B01000001 65
+#define B1000010 66
+#define B01000010 66
+#define B1000011 67
+#define B01000011 67
+#define B1000100 68
+#define B01000100 68
+#define B1000101 69
+#define B01000101 69
+#define B1000110 70
+#define B01000110 70
+#define B1000111 71
+#define B01000111 71
+#define B1001000 72
+#define B01001000 72
+#define B1001001 73
+#define B01001001 73
+#define B1001010 74
+#define B01001010 74
+#define B1001011 75
+#define B01001011 75
+#define B1001100 76
+#define B01001100 76
+#define B1001101 77
+#define B01001101 77
+#define B1001110 78
+#define B01001110 78
+#define B1001111 79
+#define B01001111 79
+#define B1010000 80
+#define B01010000 80
+#define B1010001 81
+#define B01010001 81
+#define B1010010 82
+#define B01010010 82
+#define B1010011 83
+#define B01010011 83
+#define B1010100 84
+#define B01010100 84
+#define B1010101 85
+#define B01010101 85
+#define B1010110 86
+#define B01010110 86
+#define B1010111 87
+#define B01010111 87
+#define B1011000 88
+#define B01011000 88
+#define B1011001 89
+#define B01011001 89
+#define B1011010 90
+#define B01011010 90
+#define B1011011 91
+#define B01011011 91
+#define B1011100 92
+#define B01011100 92
+#define B1011101 93
+#define B01011101 93
+#define B1011110 94
+#define B01011110 94
+#define B1011111 95
+#define B01011111 95
+#define B1100000 96
+#define B01100000 96
+#define B1100001 97
+#define B01100001 97
+#define B1100010 98
+#define B01100010 98
+#define B1100011 99
+#define B01100011 99
+#define B1100100 100
+#define B01100100 100
+#define B1100101 101
+#define B01100101 101
+#define B1100110 102
+#define B01100110 102
+#define B1100111 103
+#define B01100111 103
+#define B1101000 104
+#define B01101000 104
+#define B1101001 105
+#define B01101001 105
+#define B1101010 106
+#define B01101010 106
+#define B1101011 107
+#define B01101011 107
+#define B1101100 108
+#define B01101100 108
+#define B1101101 109
+#define B01101101 109
+#define B1101110 110
+#define B01101110 110
+#define B1101111 111
+#define B01101111 111
+#define B1110000 112
+#define B01110000 112
+#define B1110001 113
+#define B01110001 113
+#define B1110010 114
+#define B01110010 114
+#define B1110011 115
+#define B01110011 115
+#define B1110100 116
+#define B01110100 116
+#define B1110101 117
+#define B01110101 117
+#define B1110110 118
+#define B01110110 118
+#define B1110111 119
+#define B01110111 119
+#define B1111000 120
+#define B01111000 120
+#define B1111001 121
+#define B01111001 121
+#define B1111010 122
+#define B01111010 122
+#define B1111011 123
+#define B01111011 123
+#define B1111100 124
+#define B01111100 124
+#define B1111101 125
+#define B01111101 125
+#define B1111110 126
+#define B01111110 126
+#define B1111111 127
+#define B01111111 127
+#define B10000000 128
+#define B10000001 129
+#define B10000010 130
+#define B10000011 131
+#define B10000100 132
+#define B10000101 133
+#define B10000110 134
+#define B10000111 135
+#define B10001000 136
+#define B10001001 137
+#define B10001010 138
+#define B10001011 139
+#define B10001100 140
+#define B10001101 141
+#define B10001110 142
+#define B10001111 143
+#define B10010000 144
+#define B10010001 145
+#define B10010010 146
+#define B10010011 147
+#define B10010100 148
+#define B10010101 149
+#define B10010110 150
+#define B10010111 151
+#define B10011000 152
+#define B10011001 153
+#define B10011010 154
+#define B10011011 155
+#define B10011100 156
+#define B10011101 157
+#define B10011110 158
+#define B10011111 159
+#define B10100000 160
+#define B10100001 161
+#define B10100010 162
+#define B10100011 163
+#define B10100100 164
+#define B10100101 165
+#define B10100110 166
+#define B10100111 167
+#define B10101000 168
+#define B10101001 169
+#define B10101010 170
+#define B10101011 171
+#define B10101100 172
+#define B10101101 173
+#define B10101110 174
+#define B10101111 175
+#define B10110000 176
+#define B10110001 177
+#define B10110010 178
+#define B10110011 179
+#define B10110100 180
+#define B10110101 181
+#define B10110110 182
+#define B10110111 183
+#define B10111000 184
+#define B10111001 185
+#define B10111010 186
+#define B10111011 187
+#define B10111100 188
+#define B10111101 189
+#define B10111110 190
+#define B10111111 191
+#define B11000000 192
+#define B11000001 193
+#define B11000010 194
+#define B11000011 195
+#define B11000100 196
+#define B11000101 197
+#define B11000110 198
+#define B11000111 199
+#define B11001000 200
+#define B11001001 201
+#define B11001010 202
+#define B11001011 203
+#define B11001100 204
+#define B11001101 205
+#define B11001110 206
+#define B11001111 207
+#define B11010000 208
+#define B11010001 209
+#define B11010010 210
+#define B11010011 211
+#define B11010100 212
+#define B11010101 213
+#define B11010110 214
+#define B11010111 215
+#define B11011000 216
+#define B11011001 217
+#define B11011010 218
+#define B11011011 219
+#define B11011100 220
+#define B11011101 221
+#define B11011110 222
+#define B11011111 223
+#define B11100000 224
+#define B11100001 225
+#define B11100010 226
+#define B11100011 227
+#define B11100100 228
+#define B11100101 229
+#define B11100110 230
+#define B11100111 231
+#define B11101000 232
+#define B11101001 233
+#define B11101010 234
+#define B11101011 235
+#define B11101100 236
+#define B11101101 237
+#define B11101110 238
+#define B11101111 239
+#define B11110000 240
+#define B11110001 241
+#define B11110010 242
+#define B11110011 243
+#define B11110100 244
+#define B11110101 245
+#define B11110110 246
+#define B11110111 247
+#define B11111000 248
+#define B11111001 249
+#define B11111010 250
+#define B11111011 251
+#define B11111100 252
+#define B11111101 253
+#define B11111110 254
+#define B11111111 255
+
+#endif
diff --git a/cores/arduino/main.cxx b/cores/arduino/main.cxx
new file mode 100755
index 0000000..52351e4
--- /dev/null
+++ b/cores/arduino/main.cxx
@@ -0,0 +1,12 @@
+int main(void)
+{
+	init();
+
+	setup();
+    
+	for (;;)
+		loop();
+        
+	return 0;
+}
+
diff --git a/cores/arduino/pins_arduino.c b/cores/arduino/pins_arduino.c
new file mode 100755
index 0000000..1c1c088
--- /dev/null
+++ b/cores/arduino/pins_arduino.c
@@ -0,0 +1,469 @@
+/*
+  pins_arduino.c - pin definitions for the Arduino board
+  Part of Arduino / Wiring Lite
+
+  Copyright (c) 2005 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id$
+*/
+
+#include <avr/io.h>
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA8 & 168 / ARDUINO
+//
+//                  +-\/-+
+//            PC6  1|    |28  PC5 (AI 5)
+//      (D 0) PD0  2|    |27  PC4 (AI 4)
+//      (D 1) PD1  3|    |26  PC3 (AI 3)
+//      (D 2) PD2  4|    |25  PC2 (AI 2)
+// PWM+ (D 3) PD3  5|    |24  PC1 (AI 1)
+//      (D 4) PD4  6|    |23  PC0 (AI 0)
+//            VCC  7|    |22  GND
+//            GND  8|    |21  AREF
+//            PB6  9|    |20  AVCC
+//            PB7 10|    |19  PB5 (D 13)
+// PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
+// PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
+//      (D 7) PD7 13|    |16  PB2 (D 10) PWM
+//      (D 8) PB0 14|    |15  PB1 (D 9) PWM
+//                  +----+
+//
+// (PWM+ indicates the additional PWM pins on the ATmega168.)
+
+// ATMEL ATMEGA1280 / ARDUINO
+//
+// 0-7 PE0-PE7   works
+// 8-13 PB0-PB5  works
+// 14-21 PA0-PA7 works 
+// 22-29 PH0-PH7 works
+// 30-35 PG5-PG0 works
+// 36-43 PC7-PC0 works
+// 44-51 PJ7-PJ0 works
+// 52-59 PL7-PL0 works
+// 60-67 PD7-PD0 works
+// A0-A7 PF0-PF7
+// A8-A15 PK0-PK7
+
+#define PA 1
+#define PB 2
+#define PC 3
+#define PD 4
+#define PE 5
+#define PF 6
+#define PG 7
+#define PH 8
+#define PJ 10
+#define PK 11
+#define PL 12
+
+#define REPEAT8(x) x, x, x, x, x, x, x, x
+#define BV0TO7 _BV(0), _BV(1), _BV(2), _BV(3), _BV(4), _BV(5), _BV(6), _BV(7)
+#define BV7TO0 _BV(7), _BV(6), _BV(5), _BV(4), _BV(3), _BV(2), _BV(1), _BV(0)
+
+
+#if defined(__AVR_ATmega1280__)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+	NOT_A_PORT,
+	&DDRA,
+	&DDRB,
+	&DDRC,
+	&DDRD,
+	&DDRE,
+	&DDRF,
+	&DDRG,
+	&DDRH,
+	NOT_A_PORT,
+	&DDRJ,
+	&DDRK,
+	&DDRL,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+	NOT_A_PORT,
+	&PORTA,
+	&PORTB,
+	&PORTC,
+	&PORTD,
+	&PORTE,
+	&PORTF,
+	&PORTG,
+	&PORTH,
+	NOT_A_PORT,
+	&PORTJ,
+	&PORTK,
+	&PORTL,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+	NOT_A_PIN,
+	&PINA,
+	&PINB,
+	&PINC,
+	&PIND,
+	&PINE,
+	&PINF,
+	&PING,
+	&PINH,
+	NOT_A_PIN,
+	&PINJ,
+	&PINK,
+	&PINL,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+	// PORTLIST		
+	// -------------------------------------------		
+	PE	, // PE 0 ** 0 ** USART0_RX	
+	PE	, // PE 1 ** 1 ** USART0_TX	
+	PE	, // PE 4 ** 2 ** PWM2	
+	PE	, // PE 5 ** 3 ** PWM3	
+	PG	, // PG 5 ** 4 ** PWM4	
+	PE	, // PE 3 ** 5 ** PWM5	
+	PH	, // PH 3 ** 6 ** PWM6	
+	PH	, // PH 4 ** 7 ** PWM7	
+	PH	, // PH 5 ** 8 ** PWM8	
+	PH	, // PH 6 ** 9 ** PWM9	
+	PB	, // PB 4 ** 10 ** PWM10	
+	PB	, // PB 5 ** 11 ** PWM11	
+	PB	, // PB 6 ** 12 ** PWM12	
+	PB	, // PB 7 ** 13 ** PWM13	
+	PJ	, // PJ 1 ** 14 ** USART3_TX	
+	PJ	, // PJ 0 ** 15 ** USART3_RX	
+	PH	, // PH 1 ** 16 ** USART2_TX	
+	PH	, // PH 0 ** 17 ** USART2_RX	
+	PD	, // PD 3 ** 18 ** USART1_TX	
+	PD	, // PD 2 ** 19 ** USART1_RX	
+	PD	, // PD 1 ** 20 ** I2C_SDA	
+	PD	, // PD 0 ** 21 ** I2C_SCL	
+	PA	, // PA 0 ** 22 ** D22	
+	PA	, // PA 1 ** 23 ** D23	
+	PA	, // PA 2 ** 24 ** D24	
+	PA	, // PA 3 ** 25 ** D25	
+	PA	, // PA 4 ** 26 ** D26	
+	PA	, // PA 5 ** 27 ** D27	
+	PA	, // PA 6 ** 28 ** D28	
+	PA	, // PA 7 ** 29 ** D29	
+	PC	, // PC 7 ** 30 ** D30	
+	PC	, // PC 6 ** 31 ** D31	
+	PC	, // PC 5 ** 32 ** D32	
+	PC	, // PC 4 ** 33 ** D33	
+	PC	, // PC 3 ** 34 ** D34	
+	PC	, // PC 2 ** 35 ** D35	
+	PC	, // PC 1 ** 36 ** D36	
+	PC	, // PC 0 ** 37 ** D37	
+	PD	, // PD 7 ** 38 ** D38	
+	PG	, // PG 2 ** 39 ** D39	
+	PG	, // PG 1 ** 40 ** D40	
+	PG	, // PG 0 ** 41 ** D41	
+	PL	, // PL 7 ** 42 ** D42	
+	PL	, // PL 6 ** 43 ** D43	
+	PL	, // PL 5 ** 44 ** D44	
+	PL	, // PL 4 ** 45 ** D45	
+	PL	, // PL 3 ** 46 ** D46	
+	PL	, // PL 2 ** 47 ** D47	
+	PL	, // PL 1 ** 48 ** D48	
+	PL	, // PL 0 ** 49 ** D49	
+	PB	, // PB 3 ** 50 ** SPI_MISO	
+	PB	, // PB 2 ** 51 ** SPI_MOSI	
+	PB	, // PB 1 ** 52 ** SPI_SCK	
+	PB	, // PB 0 ** 53 ** SPI_SS	
+	PF	, // PF 0 ** 54 ** A0	
+	PF	, // PF 1 ** 55 ** A1	
+	PF	, // PF 2 ** 56 ** A2	
+	PF	, // PF 3 ** 57 ** A3	
+	PF	, // PF 4 ** 58 ** A4	
+	PF	, // PF 5 ** 59 ** A5	
+	PF	, // PF 6 ** 60 ** A6	
+	PF	, // PF 7 ** 61 ** A7	
+	PK	, // PK 0 ** 62 ** A8	
+	PK	, // PK 1 ** 63 ** A9	
+	PK	, // PK 2 ** 64 ** A10	
+	PK	, // PK 3 ** 65 ** A11	
+	PK	, // PK 4 ** 66 ** A12	
+	PK	, // PK 5 ** 67 ** A13	
+	PK	, // PK 6 ** 68 ** A14	
+	PK	, // PK 7 ** 69 ** A15	
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+	// PIN IN PORT		
+	// -------------------------------------------		
+	_BV( 0 )	, // PE 0 ** 0 ** USART0_RX	
+	_BV( 1 )	, // PE 1 ** 1 ** USART0_TX	
+	_BV( 4 )	, // PE 4 ** 2 ** PWM2	
+	_BV( 5 )	, // PE 5 ** 3 ** PWM3	
+	_BV( 5 )	, // PG 5 ** 4 ** PWM4	
+	_BV( 3 )	, // PE 3 ** 5 ** PWM5	
+	_BV( 3 )	, // PH 3 ** 6 ** PWM6	
+	_BV( 4 )	, // PH 4 ** 7 ** PWM7	
+	_BV( 5 )	, // PH 5 ** 8 ** PWM8	
+	_BV( 6 )	, // PH 6 ** 9 ** PWM9	
+	_BV( 4 )	, // PB 4 ** 10 ** PWM10	
+	_BV( 5 )	, // PB 5 ** 11 ** PWM11	
+	_BV( 6 )	, // PB 6 ** 12 ** PWM12	
+	_BV( 7 )	, // PB 7 ** 13 ** PWM13	
+	_BV( 1 )	, // PJ 1 ** 14 ** USART3_TX	
+	_BV( 0 )	, // PJ 0 ** 15 ** USART3_RX	
+	_BV( 1 )	, // PH 1 ** 16 ** USART2_TX	
+	_BV( 0 )	, // PH 0 ** 17 ** USART2_RX	
+	_BV( 3 )	, // PD 3 ** 18 ** USART1_TX	
+	_BV( 2 )	, // PD 2 ** 19 ** USART1_RX	
+	_BV( 1 )	, // PD 1 ** 20 ** I2C_SDA	
+	_BV( 0 )	, // PD 0 ** 21 ** I2C_SCL	
+	_BV( 0 )	, // PA 0 ** 22 ** D22	
+	_BV( 1 )	, // PA 1 ** 23 ** D23	
+	_BV( 2 )	, // PA 2 ** 24 ** D24	
+	_BV( 3 )	, // PA 3 ** 25 ** D25	
+	_BV( 4 )	, // PA 4 ** 26 ** D26	
+	_BV( 5 )	, // PA 5 ** 27 ** D27	
+	_BV( 6 )	, // PA 6 ** 28 ** D28	
+	_BV( 7 )	, // PA 7 ** 29 ** D29	
+	_BV( 7 )	, // PC 7 ** 30 ** D30	
+	_BV( 6 )	, // PC 6 ** 31 ** D31	
+	_BV( 5 )	, // PC 5 ** 32 ** D32	
+	_BV( 4 )	, // PC 4 ** 33 ** D33	
+	_BV( 3 )	, // PC 3 ** 34 ** D34	
+	_BV( 2 )	, // PC 2 ** 35 ** D35	
+	_BV( 1 )	, // PC 1 ** 36 ** D36	
+	_BV( 0 )	, // PC 0 ** 37 ** D37	
+	_BV( 7 )	, // PD 7 ** 38 ** D38	
+	_BV( 2 )	, // PG 2 ** 39 ** D39	
+	_BV( 1 )	, // PG 1 ** 40 ** D40	
+	_BV( 0 )	, // PG 0 ** 41 ** D41	
+	_BV( 7 )	, // PL 7 ** 42 ** D42	
+	_BV( 6 )	, // PL 6 ** 43 ** D43	
+	_BV( 5 )	, // PL 5 ** 44 ** D44	
+	_BV( 4 )	, // PL 4 ** 45 ** D45	
+	_BV( 3 )	, // PL 3 ** 46 ** D46	
+	_BV( 2 )	, // PL 2 ** 47 ** D47	
+	_BV( 1 )	, // PL 1 ** 48 ** D48	
+	_BV( 0 )	, // PL 0 ** 49 ** D49	
+	_BV( 3 )	, // PB 3 ** 50 ** SPI_MISO	
+	_BV( 2 )	, // PB 2 ** 51 ** SPI_MOSI	
+	_BV( 1 )	, // PB 1 ** 52 ** SPI_SCK	
+	_BV( 0 )	, // PB 0 ** 53 ** SPI_SS	
+	_BV( 0 )	, // PF 0 ** 54 ** A0	
+	_BV( 1 )	, // PF 1 ** 55 ** A1	
+	_BV( 2 )	, // PF 2 ** 56 ** A2	
+	_BV( 3 )	, // PF 3 ** 57 ** A3	
+	_BV( 4 )	, // PF 4 ** 58 ** A4	
+	_BV( 5 )	, // PF 5 ** 59 ** A5	
+	_BV( 6 )	, // PF 6 ** 60 ** A6	
+	_BV( 7 )	, // PF 7 ** 61 ** A7	
+	_BV( 0 )	, // PK 0 ** 62 ** A8	
+	_BV( 1 )	, // PK 1 ** 63 ** A9	
+	_BV( 2 )	, // PK 2 ** 64 ** A10	
+	_BV( 3 )	, // PK 3 ** 65 ** A11	
+	_BV( 4 )	, // PK 4 ** 66 ** A12	
+	_BV( 5 )	, // PK 5 ** 67 ** A13	
+	_BV( 6 )	, // PK 6 ** 68 ** A14	
+	_BV( 7 )	, // PK 7 ** 69 ** A15	
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+	// TIMERS		
+	// -------------------------------------------		
+	NOT_ON_TIMER	, // PE 0 ** 0 ** USART0_RX	
+	NOT_ON_TIMER	, // PE 1 ** 1 ** USART0_TX	
+	TIMER3B	, // PE 4 ** 2 ** PWM2	
+	TIMER3C	, // PE 5 ** 3 ** PWM3	
+	TIMER0B	, // PG 5 ** 4 ** PWM4	
+	TIMER3A	, // PE 3 ** 5 ** PWM5	
+	TIMER4A	, // PH 3 ** 6 ** PWM6	
+	TIMER4B	, // PH 4 ** 7 ** PWM7	
+	TIMER4C	, // PH 5 ** 8 ** PWM8	
+	TIMER2B	, // PH 6 ** 9 ** PWM9	
+	TIMER2A	, // PB 4 ** 10 ** PWM10	
+	TIMER1A	, // PB 5 ** 11 ** PWM11	
+	TIMER1B	, // PB 6 ** 12 ** PWM12	
+	TIMER0A	, // PB 7 ** 13 ** PWM13	
+	NOT_ON_TIMER	, // PJ 1 ** 14 ** USART3_TX	
+	NOT_ON_TIMER	, // PJ 0 ** 15 ** USART3_RX	
+	NOT_ON_TIMER	, // PH 1 ** 16 ** USART2_TX	
+	NOT_ON_TIMER	, // PH 0 ** 17 ** USART2_RX	
+	NOT_ON_TIMER	, // PD 3 ** 18 ** USART1_TX	
+	NOT_ON_TIMER	, // PD 2 ** 19 ** USART1_RX	
+	NOT_ON_TIMER	, // PD 1 ** 20 ** I2C_SDA	
+	NOT_ON_TIMER	, // PD 0 ** 21 ** I2C_SCL	
+	NOT_ON_TIMER	, // PA 0 ** 22 ** D22	
+	NOT_ON_TIMER	, // PA 1 ** 23 ** D23	
+	NOT_ON_TIMER	, // PA 2 ** 24 ** D24	
+	NOT_ON_TIMER	, // PA 3 ** 25 ** D25	
+	NOT_ON_TIMER	, // PA 4 ** 26 ** D26	
+	NOT_ON_TIMER	, // PA 5 ** 27 ** D27	
+	NOT_ON_TIMER	, // PA 6 ** 28 ** D28	
+	NOT_ON_TIMER	, // PA 7 ** 29 ** D29	
+	NOT_ON_TIMER	, // PC 7 ** 30 ** D30	
+	NOT_ON_TIMER	, // PC 6 ** 31 ** D31	
+	NOT_ON_TIMER	, // PC 5 ** 32 ** D32	
+	NOT_ON_TIMER	, // PC 4 ** 33 ** D33	
+	NOT_ON_TIMER	, // PC 3 ** 34 ** D34	
+	NOT_ON_TIMER	, // PC 2 ** 35 ** D35	
+	NOT_ON_TIMER	, // PC 1 ** 36 ** D36	
+	NOT_ON_TIMER	, // PC 0 ** 37 ** D37	
+	NOT_ON_TIMER	, // PD 7 ** 38 ** D38	
+	NOT_ON_TIMER	, // PG 2 ** 39 ** D39	
+	NOT_ON_TIMER	, // PG 1 ** 40 ** D40	
+	NOT_ON_TIMER	, // PG 0 ** 41 ** D41	
+	NOT_ON_TIMER	, // PL 7 ** 42 ** D42	
+	NOT_ON_TIMER	, // PL 6 ** 43 ** D43	
+	TIMER5C	, // PL 5 ** 44 ** D44	
+	TIMER5B	, // PL 4 ** 45 ** D45	
+	TIMER5A	, // PL 3 ** 46 ** D46	
+	NOT_ON_TIMER	, // PL 2 ** 47 ** D47	
+	NOT_ON_TIMER	, // PL 1 ** 48 ** D48	
+	NOT_ON_TIMER	, // PL 0 ** 49 ** D49	
+	NOT_ON_TIMER	, // PB 3 ** 50 ** SPI_MISO	
+	NOT_ON_TIMER	, // PB 2 ** 51 ** SPI_MOSI	
+	NOT_ON_TIMER	, // PB 1 ** 52 ** SPI_SCK	
+	NOT_ON_TIMER	, // PB 0 ** 53 ** SPI_SS	
+	NOT_ON_TIMER	, // PF 0 ** 54 ** A0	
+	NOT_ON_TIMER	, // PF 1 ** 55 ** A1	
+	NOT_ON_TIMER	, // PF 2 ** 56 ** A2	
+	NOT_ON_TIMER	, // PF 3 ** 57 ** A3	
+	NOT_ON_TIMER	, // PF 4 ** 58 ** A4	
+	NOT_ON_TIMER	, // PF 5 ** 59 ** A5	
+	NOT_ON_TIMER	, // PF 6 ** 60 ** A6	
+	NOT_ON_TIMER	, // PF 7 ** 61 ** A7	
+	NOT_ON_TIMER	, // PK 0 ** 62 ** A8	
+	NOT_ON_TIMER	, // PK 1 ** 63 ** A9	
+	NOT_ON_TIMER	, // PK 2 ** 64 ** A10	
+	NOT_ON_TIMER	, // PK 3 ** 65 ** A11	
+	NOT_ON_TIMER	, // PK 4 ** 66 ** A12	
+	NOT_ON_TIMER	, // PK 5 ** 67 ** A13	
+	NOT_ON_TIMER	, // PK 6 ** 68 ** A14	
+	NOT_ON_TIMER	, // PK 7 ** 69 ** A15	
+};
+#else
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&DDRB,
+	&DDRC,
+	&DDRD,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&PORTB,
+	&PORTC,
+	&PORTD,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+	NOT_A_PORT,
+	NOT_A_PORT,
+	&PINB,
+	&PINC,
+	&PIND,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+	PD, /* 0 */
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PD,
+	PB, /* 8 */
+	PB,
+	PB,
+	PB,
+	PB,
+	PB,
+	PC, /* 14 */
+	PC,
+	PC,
+	PC,
+	PC,
+	PC,
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+	_BV(0), /* 0, port D */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(6),
+	_BV(7),
+	_BV(0), /* 8, port B */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+	_BV(0), /* 14, port C */
+	_BV(1),
+	_BV(2),
+	_BV(3),
+	_BV(4),
+	_BV(5),
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+	NOT_ON_TIMER, /* 0 - port D */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pin 3 has hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+#else
+	TIMER2B,
+#endif
+	NOT_ON_TIMER,
+	// on the ATmega168, digital pins 5 and 6 have hardware pwm
+#if defined(__AVR_ATmega8__)
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+#else
+	TIMER0B,
+	TIMER0A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 8 - port B */
+	TIMER1A,
+	TIMER1B,
+#if defined(__AVR_ATmega8__)
+	TIMER2,
+#else
+	TIMER2A,
+#endif
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER, /* 14 - port C */
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+	NOT_ON_TIMER,
+};
+#endif
diff --git a/cores/arduino/pins_arduino.h b/cores/arduino/pins_arduino.h
new file mode 100644
index 0000000..c7e40fd
--- /dev/null
+++ b/cores/arduino/pins_arduino.h
@@ -0,0 +1,76 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+#define NOT_A_PIN 0
+#define NOT_A_PORT 0
+
+#define NOT_ON_TIMER 0
+#define TIMER0A 1
+#define TIMER0B 2
+#define TIMER1A 3
+#define TIMER1B 4
+#define TIMER2  5
+#define TIMER2A 6
+#define TIMER2B 7
+
+#define TIMER3A 8
+#define TIMER3B 9
+#define TIMER3C 10
+#define TIMER4A 11
+#define TIMER4B 12
+#define TIMER4C 13
+#define TIMER5A 14
+#define TIMER5B 15
+#define TIMER5C 16
+
+// On the ATmega1280, the addresses of some of the port registers are
+// greater than 255, so we can't store them in uint8_t's.
+extern const uint16_t PROGMEM port_to_mode_PGM[];
+extern const uint16_t PROGMEM port_to_input_PGM[];
+extern const uint16_t PROGMEM port_to_output_PGM[];
+
+extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
+// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
+extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
+extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
+
+// Get the bit location within the hardware port of the given virtual pin.
+// This comes from the pins_*.c file for the active board configuration.
+// 
+// These perform slightly better as macros compared to inline functions
+//
+#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
+#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
+#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
+#define analogInPinToBit(P) (P)
+#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
+#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
+#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
+
+#endif
diff --git a/cores/arduino/wiring.c b/cores/arduino/wiring.c
new file mode 100755
index 0000000..72bc282
--- /dev/null
+++ b/cores/arduino/wiring.c
@@ -0,0 +1,250 @@
+/*
+  wiring.c - Partial implementation of the Wiring API for the ATmega8.
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id$
+*/
+
+#include "wiring_private.h"
+
+// the prescaler is set so that timer0 ticks every 64 clock cycles, and the
+// the overflow handler is called every 256 ticks.
+#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256))
+
+// the whole number of milliseconds per timer0 overflow
+#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000)
+
+// the fractional number of milliseconds per timer0 overflow. we shift right
+// by three to fit these numbers into a byte. (for the clock speeds we care
+// about - 8 and 16 MHz - this doesn't lose precision.)
+#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3)
+#define FRACT_MAX (1000 >> 3)
+
+volatile unsigned long timer0_overflow_count = 0;
+volatile unsigned long timer0_millis = 0;
+static unsigned char timer0_fract = 0;
+
+SIGNAL(TIMER0_OVF_vect)
+{
+	// copy these to local variables so they can be stored in registers
+	// (volatile variables must be read from memory on every access)
+	unsigned long m = timer0_millis;
+	unsigned char f = timer0_fract;
+
+	m += MILLIS_INC;
+	f += FRACT_INC;
+	if (f >= FRACT_MAX) {
+		f -= FRACT_MAX;
+		m += 1;
+	}
+
+	timer0_fract = f;
+	timer0_millis = m;
+	timer0_overflow_count++;
+}
+
+unsigned long millis()
+{
+	unsigned long m;
+	uint8_t oldSREG = SREG;
+
+	// disable interrupts while we read timer0_millis or we might get an
+	// inconsistent value (e.g. in the middle of a write to timer0_millis)
+	cli();
+	m = timer0_millis;
+	SREG = oldSREG;
+
+	return m;
+}
+
+unsigned long micros() {
+	unsigned long m, t;
+	uint8_t oldSREG = SREG;
+	
+	cli();	
+	t = TCNT0;
+  
+#ifdef TIFR0
+	if ((TIFR0 & _BV(TOV0)) && (t == 0))
+		t = 256;
+#else
+	if ((TIFR & _BV(TOV0)) && (t == 0))
+		t = 256;
+#endif
+
+	m = timer0_overflow_count;
+	SREG = oldSREG;
+	
+	return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
+}
+
+void delay(unsigned long ms)
+{
+	unsigned long start = millis();
+	
+	while (millis() - start <= ms)
+		;
+}
+
+/* Delay for the given number of microseconds.  Assumes a 8 or 16 MHz clock. 
+ * Disables interrupts, which will disrupt the millis() function if used
+ * too frequently. */
+void delayMicroseconds(unsigned int us)
+{
+	uint8_t oldSREG;
+
+	// calling avrlib's delay_us() function with low values (e.g. 1 or
+	// 2 microseconds) gives delays longer than desired.
+	//delay_us(us);
+
+#if F_CPU >= 16000000L
+	// for the 16 MHz clock on most Arduino boards
+
+	// for a one-microsecond delay, simply return.  the overhead
+	// of the function call yields a delay of approximately 1 1/8 us.
+	if (--us == 0)
+		return;
+
+	// the following loop takes a quarter of a microsecond (4 cycles)
+	// per iteration, so execute it four times for each microsecond of
+	// delay requested.
+	us <<= 2;
+
+	// account for the time taken in the preceeding commands.
+	us -= 2;
+#else
+	// for the 8 MHz internal clock on the ATmega168
+
+	// for a one- or two-microsecond delay, simply return.  the overhead of
+	// the function calls takes more than two microseconds.  can't just
+	// subtract two, since us is unsigned; we'd overflow.
+	if (--us == 0)
+		return;
+	if (--us == 0)
+		return;
+
+	// the following loop takes half of a microsecond (4 cycles)
+	// per iteration, so execute it twice for each microsecond of
+	// delay requested.
+	us <<= 1;
+    
+	// partially compensate for the time taken by the preceeding commands.
+	// we can't subtract any more than this or we'd overflow w/ small delays.
+	us--;
+#endif
+
+	// disable interrupts, otherwise the timer 0 overflow interrupt that
+	// tracks milliseconds will make us delay longer than we want.
+	oldSREG = SREG;
+	cli();
+
+	// busy wait
+	__asm__ __volatile__ (
+		"1: sbiw %0,1" "\n\t" // 2 cycles
+		"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
+	);
+
+	// reenable interrupts.
+	SREG = oldSREG;
+}
+
+void init()
+{
+	// this needs to be called before setup() or some functions won't
+	// work there
+	sei();
+	
+	// on the ATmega168, timer 0 is also used for fast hardware pwm
+	// (using phase-correct PWM would mean that timer 0 overflowed half as often
+	// resulting in different millis() behavior on the ATmega8 and ATmega168)
+#if !defined(__AVR_ATmega8__)
+	sbi(TCCR0A, WGM01);
+	sbi(TCCR0A, WGM00);
+#endif  
+	// set timer 0 prescale factor to 64
+#if defined(__AVR_ATmega8__)
+	sbi(TCCR0, CS01);
+	sbi(TCCR0, CS00);
+#else
+	sbi(TCCR0B, CS01);
+	sbi(TCCR0B, CS00);
+#endif
+	// enable timer 0 overflow interrupt
+#if defined(__AVR_ATmega8__)
+	sbi(TIMSK, TOIE0);
+#else
+	sbi(TIMSK0, TOIE0);
+#endif
+
+	// timers 1 and 2 are used for phase-correct hardware pwm
+	// this is better for motors as it ensures an even waveform
+	// note, however, that fast pwm mode can achieve a frequency of up
+	// 8 MHz (with a 16 MHz clock) at 50% duty cycle
+
+	// set timer 1 prescale factor to 64
+	sbi(TCCR1B, CS11);
+	sbi(TCCR1B, CS10);
+	// put timer 1 in 8-bit phase correct pwm mode
+	sbi(TCCR1A, WGM10);
+
+	// set timer 2 prescale factor to 64
+#if defined(__AVR_ATmega8__)
+	sbi(TCCR2, CS22);
+#else
+	sbi(TCCR2B, CS22);
+#endif
+	// configure timer 2 for phase correct pwm (8-bit)
+#if defined(__AVR_ATmega8__)
+	sbi(TCCR2, WGM20);
+#else
+	sbi(TCCR2A, WGM20);
+#endif
+
+#if defined(__AVR_ATmega1280__)
+	// set timer 3, 4, 5 prescale factor to 64
+	sbi(TCCR3B, CS31);	sbi(TCCR3B, CS30);
+	sbi(TCCR4B, CS41);	sbi(TCCR4B, CS40);
+	sbi(TCCR5B, CS51);	sbi(TCCR5B, CS50);
+	// put timer 3, 4, 5 in 8-bit phase correct pwm mode
+	sbi(TCCR3A, WGM30);
+	sbi(TCCR4A, WGM40);
+	sbi(TCCR5A, WGM50);
+#endif
+
+	// set a2d prescale factor to 128
+	// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
+	// XXX: this will not work properly for other clock speeds, and
+	// this code should use F_CPU to determine the prescale factor.
+	sbi(ADCSRA, ADPS2);
+	sbi(ADCSRA, ADPS1);
+	sbi(ADCSRA, ADPS0);
+
+	// enable a2d conversions
+	sbi(ADCSRA, ADEN);
+
+	// the bootloader connects pins 0 and 1 to the USART; disconnect them
+	// here so they can be used as normal digital i/o; they will be
+	// reconnected in Serial.begin()
+#if defined(__AVR_ATmega8__)
+	UCSRB = 0;
+#else
+	UCSR0B = 0;
+#endif
+}
\ No newline at end of file
diff --git a/cores/arduino/wiring.h b/cores/arduino/wiring.h
new file mode 100755
index 0000000..f0ba04c
--- /dev/null
+++ b/cores/arduino/wiring.h
@@ -0,0 +1,137 @@
+/*
+  wiring.h - Partial implementation of the Wiring API for the ATmega8.
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id$
+*/
+
+#ifndef Wiring_h
+#define Wiring_h
+
+#include <avr/io.h>
+#include "binary.h"
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+
+#ifndef ARDUINO
+#define ARDUINO 16
+#endif
+
+#define HIGH 0x1
+#define LOW  0x0
+
+#define INPUT 0x0
+#define OUTPUT 0x1
+
+#define true 0x1
+#define false 0x0
+
+#define PI 3.1415926535897932384626433832795
+#define HALF_PI 1.5707963267948966192313216916398
+#define TWO_PI 6.283185307179586476925286766559
+#define DEG_TO_RAD 0.017453292519943295769236907684886
+#define RAD_TO_DEG 57.295779513082320876798154814105
+
+#define SERIAL  0x0
+#define DISPLAY 0x1
+
+#define LSBFIRST 0
+#define MSBFIRST 1
+
+#define CHANGE 1
+#define FALLING 2
+#define RISING 3
+
+#define INTERNAL 3
+#define DEFAULT 1
+#define EXTERNAL 0
+
+// undefine stdlib's abs if encountered
+#ifdef abs
+#undef abs
+#endif
+
+#define min(a,b) ((a)<(b)?(a):(b))
+#define max(a,b) ((a)>(b)?(a):(b))
+#define abs(x) ((x)>0?(x):-(x))
+#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
+#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
+#define radians(deg) ((deg)*DEG_TO_RAD)
+#define degrees(rad) ((rad)*RAD_TO_DEG)
+#define sq(x) ((x)*(x))
+
+#define interrupts() sei()
+#define noInterrupts() cli()
+
+#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
+#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
+#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
+
+#define lowByte(w) ((uint8_t) ((w) & 0xff))
+#define highByte(w) ((uint8_t) ((w) >> 8))
+
+#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
+#define bitSet(value, bit) ((value) |= (1UL << (bit)))
+#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
+#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
+
+typedef unsigned int word;
+
+#define bit(b) (1UL << (b))
+
+typedef uint8_t boolean;
+typedef uint8_t byte;
+
+void init(void);
+
+void pinMode(uint8_t, uint8_t);
+void digitalWrite(uint8_t, uint8_t);
+int digitalRead(uint8_t);
+int analogRead(uint8_t);
+void analogReference(uint8_t mode);
+void analogWrite(uint8_t, int);
+
+void beginSerial(long);
+void serialWrite(unsigned char);
+int serialAvailable(void);
+int serialRead(void);
+void serialFlush(void);
+
+unsigned long millis(void);
+unsigned long micros(void);
+void delay(unsigned long);
+void delayMicroseconds(unsigned int us);
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
+
+void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val);
+
+void attachInterrupt(uint8_t, void (*)(void), int mode);
+void detachInterrupt(uint8_t);
+
+void setup(void);
+void loop(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif
diff --git a/cores/arduino/wiring_analog.c b/cores/arduino/wiring_analog.c
new file mode 100755
index 0000000..529ad52
--- /dev/null
+++ b/cores/arduino/wiring_analog.c
@@ -0,0 +1,179 @@
+/*
+  wiring_analog.c - analog input and output
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+uint8_t analog_reference = DEFAULT;
+
+void analogReference(uint8_t mode)
+{
+	// can't actually set the register here because the default setting
+	// will connect AVCC and the AREF pin, which would cause a short if
+	// there's something connected to AREF.
+	analog_reference = mode;
+}
+
+int analogRead(uint8_t pin)
+{
+	uint8_t low, high;
+
+	// set the analog reference (high two bits of ADMUX) and select the
+	// channel (low 4 bits).  this also sets ADLAR (left-adjust result)
+	// to 0 (the default).
+	ADMUX = (analog_reference << 6) | (pin & 0x07);
+  
+#if defined(__AVR_ATmega1280__)
+	// the MUX5 bit of ADCSRB selects whether we're reading from channels
+	// 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high).
+	ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
+#endif
+
+	// without a delay, we seem to read from the wrong channel
+	//delay(1);
+
+	// start the conversion
+	sbi(ADCSRA, ADSC);
+
+	// ADSC is cleared when the conversion finishes
+	while (bit_is_set(ADCSRA, ADSC));
+
+	// we have to read ADCL first; doing so locks both ADCL
+	// and ADCH until ADCH is read.  reading ADCL second would
+	// cause the results of each conversion to be discarded,
+	// as ADCL and ADCH would be locked when it completed.
+	low = ADCL;
+	high = ADCH;
+
+	// combine the two bytes
+	return (high << 8) | low;
+}
+
+// Right now, PWM output only works on the pins with
+// hardware support.  These are defined in the appropriate
+// pins_*.c file.  For the rest of the pins, we default
+// to digital output.
+void analogWrite(uint8_t pin, int val)
+{
+	// We need to make sure the PWM output is enabled for those pins
+	// that support it, as we turn it off when digitally reading or
+	// writing with them.  Also, make sure the pin is in output mode
+	// for consistenty with Wiring, which doesn't require a pinMode
+	// call for the analog output pins.
+	pinMode(pin, OUTPUT);
+	
+	if (digitalPinToTimer(pin) == TIMER1A) {
+		// connect pwm to pin on timer 1, channel A
+		sbi(TCCR1A, COM1A1);
+		// set pwm duty
+		OCR1A = val;
+	} else if (digitalPinToTimer(pin) == TIMER1B) {
+		// connect pwm to pin on timer 1, channel B
+		sbi(TCCR1A, COM1B1);
+		// set pwm duty
+		OCR1B = val;
+#if defined(__AVR_ATmega8__)
+	} else if (digitalPinToTimer(pin) == TIMER2) {
+		// connect pwm to pin on timer 2, channel B
+		sbi(TCCR2, COM21);
+		// set pwm duty
+		OCR2 = val;
+#else
+	} else if (digitalPinToTimer(pin) == TIMER0A) {
+		if (val == 0) {
+			digitalWrite(pin, LOW);
+		} else {
+			// connect pwm to pin on timer 0, channel A
+			sbi(TCCR0A, COM0A1);
+			// set pwm duty
+			OCR0A = val;      
+		}
+	} else if (digitalPinToTimer(pin) == TIMER0B) {
+		if (val == 0) {
+			digitalWrite(pin, LOW);
+		} else {
+			// connect pwm to pin on timer 0, channel B
+			sbi(TCCR0A, COM0B1);
+			// set pwm duty
+			OCR0B = val;
+		}
+	} else if (digitalPinToTimer(pin) == TIMER2A) {
+		// connect pwm to pin on timer 2, channel A
+		sbi(TCCR2A, COM2A1);
+		// set pwm duty
+		OCR2A = val;	
+	} else if (digitalPinToTimer(pin) == TIMER2B) {
+		// connect pwm to pin on timer 2, channel B
+		sbi(TCCR2A, COM2B1);
+		// set pwm duty
+		OCR2B = val;
+#endif
+#if defined(__AVR_ATmega1280__)
+	// XXX: need to handle other timers here
+	} else if (digitalPinToTimer(pin) == TIMER3A) {
+		// connect pwm to pin on timer 3, channel A
+		sbi(TCCR3A, COM3A1);
+		// set pwm duty
+		OCR3A = val;
+	} else if (digitalPinToTimer(pin) == TIMER3B) {
+		// connect pwm to pin on timer 3, channel B
+		sbi(TCCR3A, COM3B1);
+		// set pwm duty
+		OCR3B = val;
+	} else if (digitalPinToTimer(pin) == TIMER3C) {
+		// connect pwm to pin on timer 3, channel C
+		sbi(TCCR3A, COM3C1);
+		// set pwm duty
+		OCR3C = val;
+	} else if (digitalPinToTimer(pin) == TIMER4A) {
+		// connect pwm to pin on timer 4, channel A
+		sbi(TCCR4A, COM4A1);
+		// set pwm duty
+		OCR4A = val;
+	} else if (digitalPinToTimer(pin) == TIMER4B) {
+		// connect pwm to pin on timer 4, channel B
+		sbi(TCCR4A, COM4B1);
+		// set pwm duty
+		OCR4B = val;
+	} else if (digitalPinToTimer(pin) == TIMER4C) {
+		// connect pwm to pin on timer 4, channel C
+		sbi(TCCR4A, COM4C1);
+		// set pwm duty
+		OCR4C = val;
+	} else if (digitalPinToTimer(pin) == TIMER5A) {
+		// connect pwm to pin on timer 5, channel A
+		sbi(TCCR5A, COM5A1);
+		// set pwm duty
+		OCR5A = val;
+	} else if (digitalPinToTimer(pin) == TIMER5B) {
+		// connect pwm to pin on timer 5, channel B
+		sbi(TCCR5A, COM5B1);
+		// set pwm duty
+		OCR5B = val;
+#endif
+	} else if (val < 128)
+		digitalWrite(pin, LOW);
+	else
+		digitalWrite(pin, HIGH);
+}
diff --git a/cores/arduino/wiring_digital.c b/cores/arduino/wiring_digital.c
new file mode 100755
index 0000000..1cdbf6c
--- /dev/null
+++ b/cores/arduino/wiring_digital.c
@@ -0,0 +1,111 @@
+/*
+  wiring_digital.c - digital input and output functions
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+void pinMode(uint8_t pin, uint8_t mode)
+{
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+	volatile uint8_t *reg;
+
+	if (port == NOT_A_PIN) return;
+
+	// JWS: can I let the optimizer do this?
+	reg = portModeRegister(port);
+
+	if (mode == INPUT) *reg &= ~bit;
+	else *reg |= bit;
+}
+
+// Forcing this inline keeps the callers from having to push their own stuff
+// on the stack. It is a good performance win and only takes 1 more byte per
+// user than calling. (It will take more bytes on the 168.)
+//
+// But shouldn't this be moved into pinMode? Seems silly to check and do on
+// each digitalread or write.
+//
+static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline));
+static inline void turnOffPWM(uint8_t timer)
+{
+	if (timer == TIMER1A) cbi(TCCR1A, COM1A1);
+	if (timer == TIMER1B) cbi(TCCR1A, COM1B1);
+
+#if defined(__AVR_ATmega8__)
+	if (timer == TIMER2) cbi(TCCR2, COM21);
+#else
+	if (timer == TIMER0A) cbi(TCCR0A, COM0A1);
+	if (timer == TIMER0B) cbi(TCCR0A, COM0B1);
+	if (timer == TIMER2A) cbi(TCCR2A, COM2A1);
+	if (timer == TIMER2B) cbi(TCCR2A, COM2B1);
+#endif
+
+#if defined(__AVR_ATmega1280__)
+	if (timer == TIMER3A) cbi(TCCR3A, COM3A1);
+	if (timer == TIMER3B) cbi(TCCR3A, COM3B1);
+	if (timer == TIMER3C) cbi(TCCR3A, COM3C1);
+	if (timer == TIMER4A) cbi(TCCR4A, COM4A1);
+	if (timer == TIMER4B) cbi(TCCR4A, COM4B1);
+	if (timer == TIMER4C) cbi(TCCR4A, COM4C1);
+	if (timer == TIMER5A) cbi(TCCR5A, COM5A1);
+	if (timer == TIMER5B) cbi(TCCR5A, COM5B1);
+	if (timer == TIMER5C) cbi(TCCR5A, COM5C1);
+#endif
+}
+
+void digitalWrite(uint8_t pin, uint8_t val)
+{
+	uint8_t timer = digitalPinToTimer(pin);
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+	volatile uint8_t *out;
+
+	if (port == NOT_A_PIN) return;
+
+	// If the pin that support PWM output, we need to turn it off
+	// before doing a digital write.
+	if (timer != NOT_ON_TIMER) turnOffPWM(timer);
+
+	out = portOutputRegister(port);
+
+	if (val == LOW) *out &= ~bit;
+	else *out |= bit;
+}
+
+int digitalRead(uint8_t pin)
+{
+	uint8_t timer = digitalPinToTimer(pin);
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+
+	if (port == NOT_A_PIN) return LOW;
+
+	// If the pin that support PWM output, we need to turn it off
+	// before getting a digital reading.
+	if (timer != NOT_ON_TIMER) turnOffPWM(timer);
+
+	if (*portInputRegister(port) & bit) return HIGH;
+	return LOW;
+}
diff --git a/cores/arduino/wiring_private.h b/cores/arduino/wiring_private.h
new file mode 100755
index 0000000..2dfe552
--- /dev/null
+++ b/cores/arduino/wiring_private.h
@@ -0,0 +1,68 @@
+/*
+  wiring_private.h - Internal header file.
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $
+*/
+
+#ifndef WiringPrivate_h
+#define WiringPrivate_h
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/delay.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#include "wiring.h"
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+#define EXTERNAL_INT_0 0
+#define EXTERNAL_INT_1 1
+#define EXTERNAL_INT_2 2
+#define EXTERNAL_INT_3 3
+#define EXTERNAL_INT_4 4
+#define EXTERNAL_INT_5 5
+#define EXTERNAL_INT_6 6
+#define EXTERNAL_INT_7 7
+
+#if defined(__AVR_ATmega1280__)
+#define EXTERNAL_NUM_INTERRUPTS 8
+#else
+#define EXTERNAL_NUM_INTERRUPTS 2
+#endif
+
+typedef void (*voidFuncPtr)(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif
diff --git a/cores/arduino/wiring_pulse.c b/cores/arduino/wiring_pulse.c
new file mode 100755
index 0000000..8f232f1
--- /dev/null
+++ b/cores/arduino/wiring_pulse.c
@@ -0,0 +1,66 @@
+/*
+  wiring_pulse.c - pulseIn() function
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH
+ * or LOW, the type of pulse to measure.  Works on pulses from 2-3 microseconds
+ * to 3 minutes in length, but must be called at least a few dozen microseconds
+ * before the start of the pulse. */
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout)
+{
+	// cache the port and bit of the pin in order to speed up the
+	// pulse width measuring loop and achieve finer resolution.  calling
+	// digitalRead() instead yields much coarser resolution.
+	uint8_t bit = digitalPinToBitMask(pin);
+	uint8_t port = digitalPinToPort(pin);
+	uint8_t stateMask = (state ? bit : 0);
+	unsigned long width = 0; // keep initialization out of time critical area
+	
+	// convert the timeout from microseconds to a number of times through
+	// the initial loop; it takes 16 clock cycles per iteration.
+	unsigned long numloops = 0;
+	unsigned long maxloops = microsecondsToClockCycles(timeout) / 16;
+	
+	// wait for any previous pulse to end
+	while ((*portInputRegister(port) & bit) == stateMask)
+		if (numloops++ == maxloops)
+			return 0;
+	
+	// wait for the pulse to start
+	while ((*portInputRegister(port) & bit) != stateMask)
+		if (numloops++ == maxloops)
+			return 0;
+	
+	// wait for the pulse to stop
+	while ((*portInputRegister(port) & bit) == stateMask)
+		width++;
+
+	// convert the reading to microseconds. The loop has been determined
+	// to be 10 clock cycles long and have about 16 clocks between the edge
+	// and the start of the loop. There will be some error introduced by
+	// the interrupt handlers.
+	return clockCyclesToMicroseconds(width * 10 + 16); 
+}
diff --git a/cores/arduino/wiring_shift.c b/cores/arduino/wiring_shift.c
new file mode 100755
index 0000000..956f864
--- /dev/null
+++ b/cores/arduino/wiring_shift.c
@@ -0,0 +1,40 @@
+/*
+  wiring_shift.c - shiftOut() function
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2005-2006 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+
+void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val)
+{
+	int i;
+
+	for (i = 0; i < 8; i++)  {
+		if (bitOrder == LSBFIRST)
+			digitalWrite(dataPin, !!(val & (1 << i)));
+		else	
+			digitalWrite(dataPin, !!(val & (1 << (7 - i))));
+			
+		digitalWrite(clockPin, HIGH);
+		digitalWrite(clockPin, LOW);		
+	}
+}
diff --git a/cores/atmega8/pins_atmega8.c b/cores/atmega8/pins_atmega8.c
new file mode 100755
index 0000000..ed1b2bd
--- /dev/null
+++ b/cores/atmega8/pins_atmega8.c
@@ -0,0 +1,119 @@
+/*

+  pin_atmega8.c - pin definitions for the atmega8

+  Part of Arduino / Wiring Lite

+

+  Copyright (c) 2005 David A. Mellis

+

+  This library is free software; you can redistribute it and/or

+  modify it under the terms of the GNU Lesser General Public

+  License as published by the Free Software Foundation; either

+  version 2.1 of the License, or (at your option) any later version.

+

+  This library is distributed in the hope that it will be useful,

+  but WITHOUT ANY WARRANTY; without even the implied warranty of

+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

+  Lesser General Public License for more details.

+

+  You should have received a copy of the GNU Lesser General

+  Public License along with this library; if not, write to the

+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,

+  Boston, MA  02111-1307  USA

+

+  $Id$

+*/

+

+#include <avr/io.h>

+#include "wiring.h"

+

+// We map the pin numbers passed to digitalRead() or

+// analogRead() directly to the corresponding pin 

+// numbers on the Atmega8.  No distinction is made

+// between analog and digital pins.

+

+// ATMEL ATMEGA8

+//

+//       +-\/-+

+// PC6  1|    |28  PC5

+// PD0  2|    |27  PC4	

+// PD1  3|    |26  PC3

+// PD2  4|    |25  PC2

+// PD3  5|    |24  PC1

+// PD4  6|    |23  PC0

+// VCC  7|    |22  GND

+// GND  8|    |21  AREF

+// PB6  9|    |20  AVCC

+// PB7 10|    |19  PB5

+// PD5 11|    |18  PB4

+// PD6 12|    |17  PB3

+// PD7 13|    |16  PB2

+// PB0 14|    |15  PB1

+//       +----+

+

+#define NUM_PINS 28

+#define NUM_PORTS 4

+

+#define PB 2

+#define PC 3

+#define PD 4

+

+int port_to_mode[NUM_PORTS + 1] = {

+	NOT_A_PORT,

+	NOT_A_PORT,

+	_SFR_IO_ADDR(DDRB),

+	_SFR_IO_ADDR(DDRC),

+	_SFR_IO_ADDR(DDRD),

+};

+

+int port_to_output[NUM_PORTS + 1] = {

+	NOT_A_PORT,

+	NOT_A_PORT,

+	_SFR_IO_ADDR(PORTB),

+	_SFR_IO_ADDR(PORTC),

+	_SFR_IO_ADDR(PORTD),

+};

+

+int port_to_input[NUM_PORTS + 1] = {

+	NOT_A_PORT,

+	NOT_A_PORT,

+	_SFR_IO_ADDR(PINB),

+	_SFR_IO_ADDR(PINC),

+	_SFR_IO_ADDR(PIND),

+};

+

+pin_t digital_pin_to_port_array[] = {

+	{ NOT_A_PIN, NOT_A_PIN },

+	

+	{ PC, 6 },

+	{ PD, 0 },

+	{ PD, 1 },

+	{ PD, 2 },

+	{ PD, 3 },

+	{ PD, 4 },

+	{ NOT_A_PIN, NOT_A_PIN },

+	{ NOT_A_PIN, NOT_A_PIN },

+	{ PB, 6 },

+	{ PB, 7 },

+	{ PD, 5 },

+	{ PD, 6 },

+	{ PD, 7 },

+	{ PB, 0 },

+	

+	{ PB, 1 },

+	{ PB, 2 },

+	{ PB, 3 },

+	{ PB, 4 },

+	{ PB, 5 },

+	{ NOT_A_PIN, NOT_A_PIN },

+	{ NOT_A_PIN, NOT_A_PIN },

+	{ NOT_A_PIN, NOT_A_PIN },

+	{ PC, 0 },

+	{ PC, 1 },

+	{ PC, 2 },

+	{ PC, 3 },

+	{ PC, 4 },

+	{ PC, 5 },

+};

+

+pin_t *digital_pin_to_port = digital_pin_to_port_array;

+pin_t *analog_in_pin_to_port = digital_pin_to_port_array;

+pin_t *analog_out_pin_to_port = digital_pin_to_port_array;

diff --git a/cores/blank/WProgram.h b/cores/blank/WProgram.h
new file mode 100755
index 0000000..e69de29
--- /dev/null
+++ b/cores/blank/WProgram.h
diff --git a/cores/blank/main.cxx b/cores/blank/main.cxx
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/cores/blank/main.cxx