Merge remote branch 'upstream/new-extension'

Moved my fork to the Arduino 1.0 codebase

1 files changed, 0 insertions, 88 deletions

diff --git a/cores/arduino/pins_arduino.h b/cores/arduino/pins_arduino.h
deleted file mode 100644
index bc931c5..0000000
--- a/cores/arduino/pins_arduino.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-#define NOT_A_PIN 0
-#define NOT_A_PORT 0
-
-#define NOT_ON_TIMER 0
-#define TIMER0A 1
-#define TIMER0B 2
-#define TIMER1A 3
-#define TIMER1B 4
-#define TIMER2  5
-#define TIMER2A 6
-#define TIMER2B 7
-
-#define TIMER3A 8
-#define TIMER3B 9
-#define TIMER3C 10
-#define TIMER4A 11
-#define TIMER4B 12
-#define TIMER4C 13
-#define TIMER5A 14
-#define TIMER5B 15
-#define TIMER5C 16
-
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-const static uint8_t SS   = 53;
-const static uint8_t MOSI = 51;
-const static uint8_t MISO = 50;
-const static uint8_t SCK  = 52;
-#else
-const static uint8_t SS   = 10;
-const static uint8_t MOSI = 11;
-const static uint8_t MISO = 12;
-const static uint8_t SCK  = 13;
-#endif
-
-// On the ATmega1280, the addresses of some of the port registers are
-// greater than 255, so we can't store them in uint8_t's.
-extern const uint16_t PROGMEM port_to_mode_PGM[];
-extern const uint16_t PROGMEM port_to_input_PGM[];
-extern const uint16_t PROGMEM port_to_output_PGM[];
-
-extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
-// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
-
-// Get the bit location within the hardware port of the given virtual pin.
-// This comes from the pins_*.c file for the active board configuration.
-// 
-// These perform slightly better as macros compared to inline functions
-//
-#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
-#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
-#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
-#define analogInPinToBit(P) (P)
-#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
-#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
-#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
-
-#endif