rename arduino core dir to xinputHEADmaster

1 files changed, 0 insertions, 189 deletions

diff --git a/cores/arduino/USBAPI.h b/cores/arduino/USBAPI.h
deleted file mode 100644
index 1ad268c..0000000
--- a/cores/arduino/USBAPI.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
-  USBAPI.h
-  Copyright (c) 2005-2014 Arduino.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#ifndef __USBAPI__
-#define __USBAPI__
-
-#include <inttypes.h>
-#include <avr/pgmspace.h>
-#include <avr/eeprom.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned long u32;
-
-#include "Arduino.h"
-
-// This definitions is useful if you want to reduce the EP_SIZE to 16
-// at the moment only 64 and 16 as EP_SIZE for all EPs are supported except the control endpoint
-#ifndef USB_EP_SIZE
-#define USB_EP_SIZE 64
-#endif
-
-#if defined(USBCON)
-
-#include "USBDesc.h"
-#include "USBCore.h"
-#include "xinput/USB_XInput_Descriptors.h"
-
-//================================================================================
-//================================================================================
-//	USB
-
-#define EP_TYPE_CONTROL				(0x00)
-#define EP_TYPE_BULK_IN				((1<<EPTYPE1) | (1<<EPDIR))
-#define EP_TYPE_BULK_OUT			(1<<EPTYPE1)
-#define EP_TYPE_INTERRUPT_IN		((1<<EPTYPE1) | (1<<EPTYPE0) | (1<<EPDIR))
-#define EP_TYPE_INTERRUPT_OUT		((1<<EPTYPE1) | (1<<EPTYPE0))
-#define EP_TYPE_ISOCHRONOUS_IN		((1<<EPTYPE0) | (1<<EPDIR))
-#define EP_TYPE_ISOCHRONOUS_OUT		(1<<EPTYPE0)
-
-class USBDevice_
-{
-public:
-	USBDevice_();
-	bool configured();
-
-	void attach();
-	void detach();	// Serial port goes down too...
-	void poll();
-	bool wakeupHost(); // returns false, when wakeup cannot be processed
-
-	bool isSuspended();
-};
-extern USBDevice_ USBDevice;
-
-//================================================================================
-//================================================================================
-//	Serial over CDC (Serial1 is the physical port)
-
-struct ring_buffer;
-
-#ifndef SERIAL_BUFFER_SIZE
-#if ((RAMEND - RAMSTART) < 1023)
-#define SERIAL_BUFFER_SIZE 16
-#else
-#define SERIAL_BUFFER_SIZE 64
-#endif
-#endif
-#if (SERIAL_BUFFER_SIZE>256)
-#error Please lower the CDC Buffer size
-#endif
-
-class Serial_ : public Stream
-{
-public:
-	Serial_() {};
-	void begin(unsigned long) {}
-	void begin(unsigned long, uint8_t) {}
-	void end(void) {}
-
-	virtual int available(void) { return -1; }
-	virtual int peek(void) { return -1; }
-	virtual int read(void) { return -1; }
-	virtual int availableForWrite(void) { return 0; }
-	virtual void flush(void) {}
-	virtual size_t write(uint8_t) { return 1; }
-	virtual size_t write(const uint8_t*, size_t n) { return n; }
-	using Print::write; // pull in write(str) and write(buf, size) from Print
-	operator bool() { return true; }
-
-	// This method allows processing "SEND_BREAK" requests sent by
-	// the USB host. Those requests indicate that the host wants to
-	// send a BREAK signal and are accompanied by a single uint16_t
-	// value, specifying the duration of the break. The value 0
-	// means to end any current break, while the value 0xffff means
-	// to start an indefinite break.
-	// readBreak() will return the value of the most recent break
-	// request, but will return it at most once, returning -1 when
-	// readBreak() is called again (until another break request is
-	// received, which is again returned once).
-	// This also mean that if two break requests are received
-	// without readBreak() being called in between, the value of the
-	// first request is lost.
-	// Note that the value returned is a long, so it can return
-	// 0-0xffff as well as -1.
-	int32_t readBreak() { return -1; };
-
-	// These return the settings specified by the USB host for the
-	// serial port. These aren't really used, but are offered here
-	// in case a sketch wants to act on these settings.
-	uint32_t baud() { return 0; }
-	uint8_t stopbits() { return 1; }
-	uint8_t paritytype() { return 0; }
-	uint8_t numbits() { return 8; }
-	bool dtr() { return true; }
-	bool rts() { return true; }
-	enum {
-		ONE_STOP_BIT = 0,
-		ONE_AND_HALF_STOP_BIT = 1,
-		TWO_STOP_BITS = 2,
-	};
-	enum {
-		NO_PARITY = 0,
-		ODD_PARITY = 1,
-		EVEN_PARITY = 2,
-		MARK_PARITY = 3,
-		SPACE_PARITY = 4,
-	};
-
-};
-extern Serial_ Serial;
-
-#define HAVE_CDCSERIAL
-
-//================================================================================
-//================================================================================
-//  Low level API
-
-typedef struct
-{
-	uint8_t bmRequestType;
-	uint8_t bRequest;
-	uint8_t wValueL;
-	uint8_t wValueH;
-	uint16_t wIndex;
-	uint16_t wLength;
-} USBSetup;
-
-//================================================================================
-//================================================================================
-
-#define TRANSFER_PGM		0x80
-#define TRANSFER_RELEASE	0x40
-#define TRANSFER_ZERO		0x20
-
-int USB_SendControl(uint8_t flags, const void* d, int len);
-int USB_RecvControl(void* d, int len);
-int USB_RecvControlLong(void* d, int len);
-
-uint8_t	USB_Available(uint8_t ep);
-uint8_t USB_SendSpace(uint8_t ep);
-int USB_Send(uint8_t ep, const void* data, int len);	// blocking
-int USB_Recv(uint8_t ep, void* data, int len);		// non-blocking
-int USB_Recv(uint8_t ep);							// non-blocking
-void USB_Flush(uint8_t ep);
-
-#include "xinput/USB_XInput_API.h"
-
-#endif
-
-#endif /* if defined(USBCON) */