rename arduino core dir to xinputHEADmaster

1 files changed, 0 insertions, 161 deletions

diff --git a/cores/arduino/HardwareSerial.h b/cores/arduino/HardwareSerial.h
deleted file mode 100644
index 6ff29d0..0000000
--- a/cores/arduino/HardwareSerial.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
-  HardwareSerial.h - Hardware serial library for Wiring
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
-  Modified 28 September 2010 by Mark Sproul
-  Modified 14 August 2012 by Alarus
-  Modified 3 December 2013 by Matthijs Kooijman
-*/
-
-#ifndef HardwareSerial_h
-#define HardwareSerial_h
-
-#include <inttypes.h>
-
-#include "Stream.h"
-
-// Define constants and variables for buffering incoming serial data.  We're
-// using a ring buffer (I think), in which head is the index of the location
-// to which to write the next incoming character and tail is the index of the
-// location from which to read.
-// NOTE: a "power of 2" buffer size is recommended to dramatically
-//       optimize all the modulo operations for ring buffers.
-// WARNING: When buffer sizes are increased to > 256, the buffer index
-// variables are automatically increased in size, but the extra
-// atomicity guards needed for that are not implemented. This will
-// often work, but occasionally a race condition can occur that makes
-// Serial behave erratically. See https://github.com/arduino/Arduino/issues/2405
-#if !defined(SERIAL_TX_BUFFER_SIZE)
-#if ((RAMEND - RAMSTART) < 1023)
-#define SERIAL_TX_BUFFER_SIZE 16
-#else
-#define SERIAL_TX_BUFFER_SIZE 64
-#endif
-#endif
-#if !defined(SERIAL_RX_BUFFER_SIZE)
-#if ((RAMEND - RAMSTART) < 1023)
-#define SERIAL_RX_BUFFER_SIZE 16
-#else
-#define SERIAL_RX_BUFFER_SIZE 64
-#endif
-#endif
-#if (SERIAL_TX_BUFFER_SIZE>256)
-typedef uint16_t tx_buffer_index_t;
-#else
-typedef uint8_t tx_buffer_index_t;
-#endif
-#if  (SERIAL_RX_BUFFER_SIZE>256)
-typedef uint16_t rx_buffer_index_t;
-#else
-typedef uint8_t rx_buffer_index_t;
-#endif
-
-// Define config for Serial.begin(baud, config);
-#define SERIAL_5N1 0x00
-#define SERIAL_6N1 0x02
-#define SERIAL_7N1 0x04
-#define SERIAL_8N1 0x06
-#define SERIAL_5N2 0x08
-#define SERIAL_6N2 0x0A
-#define SERIAL_7N2 0x0C
-#define SERIAL_8N2 0x0E
-#define SERIAL_5E1 0x20
-#define SERIAL_6E1 0x22
-#define SERIAL_7E1 0x24
-#define SERIAL_8E1 0x26
-#define SERIAL_5E2 0x28
-#define SERIAL_6E2 0x2A
-#define SERIAL_7E2 0x2C
-#define SERIAL_8E2 0x2E
-#define SERIAL_5O1 0x30
-#define SERIAL_6O1 0x32
-#define SERIAL_7O1 0x34
-#define SERIAL_8O1 0x36
-#define SERIAL_5O2 0x38
-#define SERIAL_6O2 0x3A
-#define SERIAL_7O2 0x3C
-#define SERIAL_8O2 0x3E
-
-class HardwareSerial : public Stream
-{
-  protected:
-    volatile uint8_t * const _ubrrh;
-    volatile uint8_t * const _ubrrl;
-    volatile uint8_t * const _ucsra;
-    volatile uint8_t * const _ucsrb;
-    volatile uint8_t * const _ucsrc;
-    volatile uint8_t * const _udr;
-    // Has any byte been written to the UART since begin()
-    bool _written;
-
-    volatile rx_buffer_index_t _rx_buffer_head;
-    volatile rx_buffer_index_t _rx_buffer_tail;
-    volatile tx_buffer_index_t _tx_buffer_head;
-    volatile tx_buffer_index_t _tx_buffer_tail;
-
-    // Don't put any members after these buffers, since only the first
-    // 32 bytes of this struct can be accessed quickly using the ldd
-    // instruction.
-    unsigned char _rx_buffer[SERIAL_RX_BUFFER_SIZE];
-    unsigned char _tx_buffer[SERIAL_TX_BUFFER_SIZE];
-
-  public:
-    inline HardwareSerial(
-      volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
-      volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
-      volatile uint8_t *ucsrc, volatile uint8_t *udr);
-    void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
-    void begin(unsigned long, uint8_t);
-    void end();
-    virtual int available(void);
-    virtual int peek(void);
-    virtual int read(void);
-    virtual int availableForWrite(void);
-    virtual void flush(void);
-    virtual size_t write(uint8_t);
-    inline size_t write(unsigned long n) { return write((uint8_t)n); }
-    inline size_t write(long n) { return write((uint8_t)n); }
-    inline size_t write(unsigned int n) { return write((uint8_t)n); }
-    inline size_t write(int n) { return write((uint8_t)n); }
-    using Print::write; // pull in write(str) and write(buf, size) from Print
-    operator bool() { return true; }
-
-    // Interrupt handlers - Not intended to be called externally
-    inline void _rx_complete_irq(void);
-    void _tx_udr_empty_irq(void);
-};
-
-#if defined(UBRRH) || defined(UBRR0H)
-  extern HardwareSerial Serial;
-  #define HAVE_HWSERIAL0
-#endif
-#if defined(UBRR1H)
-  extern HardwareSerial Serial1;
-  #define HAVE_HWSERIAL1
-#endif
-#if defined(UBRR2H)
-  extern HardwareSerial Serial2;
-  #define HAVE_HWSERIAL2
-#endif
-#if defined(UBRR3H)
-  extern HardwareSerial Serial3;
-  #define HAVE_HWSERIAL3
-#endif
-
-extern void serialEventRun(void) __attribute__((weak));
-
-#endif